British Rail Class 769 Flex | |
---|---|
In service | November 2020 –present [1] |
Manufacturer |
|
Built at |
|
Family name | BR Second Generation (Mark 3) |
Replaced | |
Constructed |
|
Number in service | 8 |
Number scrapped | 1 vehicle [2] |
Owners | Porterbrook |
Operators |
|
Depots | |
Specifications | |
Car body construction | Steel [3] |
Car length |
|
Width | 2.82 m (9 ft 3 in) [4] |
Height | 3.58 m (11 ft 9 in) [4] |
Doors | Double-leaf sliding pocket, each 1.010 m (3 ft 3.8 in) wide(2 per side per car) [3] |
Wheelbase | Over bogie centres: 14.170 m (46 ft 5.9 in) [3] |
Maximum speed | 100 mph (161 km/h) |
Prime mover(s) | 2 × MAN D2876 (one per DT vehicle) [5] |
Engine type | Inline-6 4-stroke turbo-diesel with SCR [6] [5] |
Displacement | 12.8 L (780 cu in) [6] |
Traction motors | 4 × GEC G315BZ [4] |
Power output | 390 kW (520 hp) per engine [5] |
Electric system(s) | |
Current collector(s) |
|
UIC classification | 2′2′+Bo′Bo′+2′2′+2′2′ |
Bogies |
|
Minimum turning radius | 70.4 m (231 ft 0 in) [3] |
Braking system(s) | Electro-pneumatic (disc) [3] |
Safety system(s) | |
Coupling system | Tightlock |
Multiple working | Within class |
Track gauge | 1,435 mm (4 ft 8+1⁄2 in) standard gauge |
The British Rail Class 769 Flex is a class of bi-mode multiple unit (BMU) [8] [9] [note 2] converted by Brush Traction, and running in service with Northern Trains. The train is a conversion of the existing Class 319 electric multiple unit (EMU), a conventional unit type which had become surplus to requirements during the 2010s. [11]
The conversion process is carried out by a partnership between the rolling stock leasing company Porterbrook and train manufacturer Brush Traction. The conversion principally involves the addition of a pair of MAN diesel engines (one under each driving trailer vehicle), the output of which is fed into ABB-provided alternators to power the existing electric traction systems. [11] According to Porterbrook, the Class 769's performance under diesel power is either equal or superior to that of a Class 150 Sprinter diesel multiple unit (DMU), and the switchover between EMU and DMU modes can be carried out while the train is in motion. [5]
The Class 319 units were built by BREL between 1987 and 1990 for Network SouthEast as dual-voltage units to run on Thameslink services. In late 2014, Govia Thameslink Railway began returning its allocation of Class 319 units to Porterbrook (the owner of the units) as they were gradually replaced by Class 387 units and then ultimately Class 700 units on Thameslink services. Twenty Class 319s were cascaded to Northern Rail and allocated to Allerton for use on the newly electrified lines between Liverpool Lime Street, Manchester Airport and Preston. [12] [13] A further twelve Class 319s were leased by Arriva Rail North in 2016. [14]
In December 2016, Porterbrook announced a partnership with Northern to convert eight Class 319/4 units from electric multiple units to bi-mode multiple units (BMUs), aiming to provide a solution to cover for the shortage of diesel multiple units following the deferral of several electrification projects across the network. They were initially referred to as the Class 319 Flex, before being allocated the TOPS designation Class 769. [15] [16] [17]
According to railway industry publication Rail Engineer, a key reason for the selection of the Class 319 as the basis for such a conversion was that the type had been subject to a recent programme of upgrades which had installed new passenger information systems and accessibility-friendly toilets with controlled emission systems. Engineers at Porterbrook, having been tasked with finding a new use for recently-surplus vehicles of the class, decided that there was an emerging market for a bi-mode suburban/regional train that could readily move between electrified mainlines and non-electrified adjoining routes. [5]
During a detailed evaluation to determine a suitable independent power source for the type, Porterbrook decided that the desired performance and range of the vehicle would be at least equal to a Class 150 Sprinter diesel multiple unit (DMU). [5] Furthermore, it was also determined that these trains would be capable of interchanging between electrified and non-electrified lines via a straightforward switchover process, including potentially while in motion. According to Porterbrook, efforts were made to make the driving experience as similar to the Class 319 as possible to make it an attractive option to prospective operators. [5]
The use of various energy storage mediums, including batteries, flywheels, supercapacitors and hydrogen fuel cells were examined, but most were discarded due to the insufficient range provided. A lack of available refuelling infrastructure and risks posed over the approvals process were also present with the hydrogen option. [5] A diesel power unit was selected due to its optimum performance across factors including range, weight, size, power density, and overall cost. According to Porterbrook, the selected engine should produce lower emissions and reduced maintenance costs, as well as a higher tractive effort at low speeds, than a Class 150 train due to its use of modern technology. [5]
According to industry publication Rail Engineer, detailed design work on the Class 769 was performed by a partnership between Porterbrook and Brush Traction, the latter having prior bi-mode vehicle experience with the British Rail Class 73 electro-diesel locomotive. [5] Reportedly, over 60 engineers were involved in the design, which required in excess of 45,000 engineering hours to produce over 2,500 drawings, detailing more than 3,500 components involved in the conversion. Additional input was gathered from several of the original units' designers, which helped to compensate for missing and incomplete drawings. [5]
At its core, the conversion work involves the fitting of a powerpack containing a Diesel engine and associated alternator underneath each of the driving trailer vehicles, which drives the existing traction apparatus via the DC bus along with a new return cable. [5] The engine adopted is the MAN D2876, capable of generating up to 390 kW (520 hp) per engine; this powerplant is furnished with a selective catalytic reduction (SCR) system to reduce NOx emissions. An exhaust system is also necessitated for the engine, which uses a layout that is similar to that of a Class 150 DMU, as well as fire barriers and suppression systems to account for the added risk of fire presented by the powerpack. [5]
The cab controls and circuit breakers have been changed to allow the driver to choose between diesel, overhead AC, or third-rail DC (where applicable) power sources. [5] On the 769/9 subclass for GWR, conductive shoegear is fitted to the trailing bogies of the driving trailer vehicles, along with a new power bus and additional changeover contactors installed under the intermediate trailer car and motor car. Furthermore, new and modified electronic control units are also installed to regulate the Diesel engine's power output and to help it emulate the DC conductor rail. [5] Overall, the modifications add approximately 7.5 tonnes to each driving trailer; the additional weight is evenly distributed across the underframe, which imposed several constraints and necessitated the relocation of the original heating equipment to make room. The original suspension and brakes have been adjusted to compensate for the presence of the additional mass. [5]
Initially, eight units were selected to be converted for Northern, with Porterbrook also marketing the Class 769 to other operators. In April 2017, the first two units to be converted, 319434 and 319456, arrived at Brush Traction's facility in Loughborough. [18] [19] [20] The majority of the conversion work, including all major elements, has been carried out at Brush Traction Loughborough facility. [5] On the initial eight trains converted, work such as reliability improvement, re-branding and other modifications have been undertaken by Knorr-Bremse Rail Services (KBRS). For all subsequent trains, all works other than core Flex conversion tasks are set to be performed by KBRS. [5]
Testing of the first Class 769 towards securing type approval was originally planned to take place at the Great Central Railway in November 2017. [5] Testing was later than expected but trials were underway in November 2018. [21]
According to Rail Engineer, as the bi-mode conversion is neither considered to be an upgrade nor a renewal, it did not require authorisation under the current standardised safety method for risk evaluation and assessment; however, this process has been voluntarily applied to reassure customers of the vehicle's safety. [5] Reportedly, based upon demand for the Class 769, Porterbrook has ambitions to pursue further conversion programmes. [5] Engineers at the company have evaluated other vehicle classes for the Flex conversion scheme, including a hybrid concept based on the Class 455 DC-powered EMU, which was speculated to include new three-phase AC traction systems, regenerative braking, and battery storage to capture this regenerated energy and from the Diesel engines. [5]
Arriva Rail North (trading as Northern) were to be the first operator of the Class 769, with eight units (although Transport for Wales introduced a set into traffic first).[ contradictory ] Northern indicated that the use of Class 769s would provide the most benefit on routes which are partially electrified, as they would be able to use their pantograph to operate on electrified routes while still being able to operate away from the overhead lines by employing their diesel engines. [22]
The eight Northern units are stabled at Allerton TMD, [23] with the first unit delivered there in December 2018, but along with a second delivered set, it was returned to Doncaster.[ citation needed ]
Originally scheduled to begin entering service with previous Northern franchise operator (Arriva Rail North) in May 2018, they were later expected to start operating in the first half of 2019. [24] Northern planned to deploy its Class 769s on services between Wigan North Western, Alderley Edge and Stalybridge. Northern had stated their intention to extend these services from Wigan to Southport from December 2019. Previously, there were plans to operate Class 769 units on the Lakes line. [25]
The Class 769s entered service with government-owned operator Northern Trains in May 2021. [26]
In July 2017, five units were ordered by the Welsh Government for the Wales & Borders franchise, to enable Class 150 and Class 158 diesel multiple units to be released from service to undergo modifications to comply with PRM regulations, as well as allowing the company to increase its fleet capacity. [27] Transport for Wales held an option for a further four, which they took up in November 2018. [28]
Transport for Wales' allocation of nine Class 769s are being converted from five Class 319/0 and four Class 319/4 units, with the former being the ones ordered under Arriva Trains Wales and the latter being the optional extras selected by TfW Rail. The first unit, 769002, was delivered to Cardiff Canton depot in March 2019. [9] The class first entered service in November 2020. [1]
Transport for Wales Rail withdrew the last of its Class 769 fleet on 19 May 2023. [29]
It was planned for Great Western Railway to operate nineteen Class 769/9 units, enabling the cascade of Class 165 and 166 Turbo units to the Bristol area and Class 158 units into Devon and Cornwall. The operator intended to run the first services in spring 2019, [30] but this was delayed by issues faced by Porterbrook in converting the units.
Although planned for use initially in London and the Thames Valley while 12 Class 387 units were modified for Heathrow Express services, the future plan for these units was to operate services between Oxford, Reading and Gatwick Airport, which would have meant operating on non-electrified, 25 kV AC OHLE and 750 V DC third-rail routes. To enable this, GWR's allocation of Class 769 units retained their dual-voltage capability in addition to being fitted with diesel power units. The units also received an internal refurbishment and were fitted with air cooling. [31]
The first Class 769 to be delivered to GWR was 769943, which was delivered to Reading TMD in August 2020. It was expected to enter the service in early 2021, [32] but this was later pushed back to between June and December 2021, [33] and then delayed further to 2022.
In December 2022, GWR announced that the introduction of the Class 769 fleet would be abandoned, with all units being handed back to Porterbrook in April 2023. [34]
In June 2024 it was announced that 2 of the former Great Western Railway Class 769/9s are to be converted to parcels use. [35]
Class | Operator | Qty. | Year converted | Unit numbers |
---|---|---|---|---|
769/0 | Stored | 5 | 2019–2020 | 769002–769003, 769006–769008 [29] [36] |
769/4 | Northern Trains | 8 | 2017–2020 | 769424, 769431, 769434, 769442, 769448, 769450, 769456, 769458 [37] |
Stored | 4 | 2020 | 769421, 769426, [38] [note 3] 769445, 769452 [29] [36] [39] | |
769/9 | Converted to parcels use | 2 | 2020–2021 | 769935, 769949 [35] |
Stored [34] | 17 | 769922-769923, 769925, 769927-769928, 769930, 769932, 769936-769940, 769943-769944, 769946-769947, 769959 [37] |
Direct Rail Services (DRS) is a rail freight company in Great Britain, and is one of the publicly owned railway companies in the United Kingdom.
Porterbrook is a British rolling stock company (ROSCO), created as part of the privatisation of British Rail. Together with Angel Trains and Eversholt Rail Group, it is one of the three original ROSCOs.
The British Rail Class 321 is a class of electric multiple unit (EMU) passenger train built by British Rail Engineering Limited's York Carriage Works in three batches between 1988 and 1991 for Network SouthEast and Regional Railways. The class uses alternating current (AC) overhead electrification. The design was successful and led to the development of the similar Class 320 and Class 322.
The Windermere branch line, also called the Lakes line, is a branch railway line which runs from Oxenholme on the West Coast Main Line to Windermere via Kendal in the county of Cumbria, North West England.
The British Rail Class 350 Desiro is a class of electric multiple unit passenger train built by Siemens Transportation Systems to its Desiro design between 2004 and 2014. All 87 are now operated by West Midlands Trains, having previously been operated by Central Trains, Silverlink, Southern, London Midland, First TransPennine Express and TransPennine Express.
The British Rail Class 43 (HST) is the TOPS classification used for the InterCity 125 High Speed Train diesel-electric power cars, built by British Rail Engineering Limited from 1975 to 1982, and in service in the UK since 1976.
The British Rail Class 319 is an electric multiple unit passenger train built by British Rail Engineering Limited's Holgate Road carriage works for use on north–south cross-London services. These dual-voltage trains are capable of operating on 25 kV 50 Hz from AC overhead wires or 750 V DC from a third rail.
The Class 168 Clubman is a British diesel-hydraulic multiple unit passenger train used on Chiltern Line services between London Marylebone and the West Midlands. The trains were built by Adtranz at the Derby Litchurch Lane Works in several batches from 1998.
Allerton TMD is a railway depot situated in Allerton, Liverpool. Situated opposite Liverpool South Parkway bus and rail interchange, it is visible from trains which are travelling between the former and Hunts Cross and the overhead passageway above platforms 1 to 4 at Liverpool South Parkway. The depot is located less than 2 km (1.2 mi) from the Freightliner intermodal terminal at Garston Docks and is also 7 km (4.3 mi) from the Stobart Rail intermodal depot in Widnes.
The British Rail Class 801 Azuma is a class of electric multiple unit (EMU) built by Hitachi Rail for London North Eastern Railway. The units have been built since 2017 at Hitachi's Newton Aycliffe Manufacturing Facility and have been used on services on the East Coast Main Line since 16 September 2019. As part of its production, the Class 801 units were ordered as part of the Intercity Express Programme and are in the Hitachi AT300 product family, alongside the closely related Class 800 units. LNER have branded the units as the Azuma, just like on their Class 800 units.
The Coradia 1000 is a type of Diesel Multiple Unit (DMU) operating in Great Britain and which is part of the Alstom Coradia family of diesel and electric multiple units. There are two types that were built, the Class 175 and Class 180.
The British Rail Class 802 is a type of high-speed bi-mode multiple-unit passenger train designed and produced by the Japanese manufacturer Hitachi Rail. It has been operated by Great Western Railway, TransPennine Express, and Hull Trains; each of these train operating companies has given its own units a unique brand: Great Western Railway's units are branded Intercity Express Trains (IETs), TransPennine Express units are branded Nova 1s and Hull Trains' units are branded Paragons.
The British Rail Class 331 Civity is a class of electric multiple unit built by CAF, owned by Eversholt Rail Group, and currently operated by Northern Trains. A total of 43 units have been built – 31 three-car units and 12 four-car units. Construction of the trains started in July 2017 and they were phased into service from 1 July 2019.
The British Rail Class 69 is a class of diesel locomotives which are converted from Class 56 locomotives. The conversion work is performed by Progress Rail at their workshop in Longport.
The British Rail Class 799 HydroFLEX is a prototype class of bi-mode multiple unit adapted from Class 319 electric multiple units (319001/382). The existing 25 kV AC and 750 V DC equipment has been retained with a hydrogen fuel cell added, currently taking up one of the carriages.
The British Rail Class 810 Aurora is a type of bi-mode multiple unit being constructed by Hitachi Rail for East Midlands Railway (EMR). Based on the Hitachi AT300 design, 33 five-car units will replace Class 222 units on EMR's intercity routes in 2025.
The British Rail Class 600 Breeze was a proposed class of hydrogen fuel cell-powered multiple units that was to have been converted from existing BREL Class 321 electric multiple units. The project commenced in 2018, but was cancelled in 2022 before any conversions took place.
Howdon Depot is a vehicle cleaning, maintenance and stabling facility used by the Tyne and Wear Metro, in Howdon, North Tyneside in Tyne and Wear, England. It is equipped with ten storage roads, and is capable of accepting and assembling the new fleet of Class 555 Metro currently being constructed by Stadler. It also features a maintenance shed with a single road and a pit underneath, as well as one shunt road.
The British Rail Class 768 is a class of bi-mode multiple unit being converted from Class 319 passenger trains by Brush Traction and Wabtec to carry parcels.