SR Class 4Lav

Last updated

Southern Railway 4-LAV
4-lav emu.jpg
4-LAV unit approaching Coulsdon North c.1968
In service1932–1969
ManufacturerSouthern Railway
Built at Eastleigh Works
Constructed1930–1932 (33),
1939–1940 (2)
Number built35
Number scrappedAll
FormationPower car + 2 trailer cars + power car
Fleet numbersSets 1921–1953, later 2921–2955
Capacity70 first class,
204 third class
Operators Southern Railway
British Railways
Lines servedLondon Victoria to Brighton and Worthing
Specifications
Car body constructionSteel panelled, wooden body, on steel underframe
Train length257 ft 2+12 in (78.40 m)
Weight139 long tons (141 t)
Traction systemFour 275 hp (205 kW) traction motors
Power output1,100 hp (820 kW)
Electric system(s) 750 V DC
Current collector(s) Third rail
UIC classification Bo′2′+2′2′+2′2′+2′Bo
Braking system(s) Automatic air
Coupling system Screw-link
Multiple working Standard SR
Track gauge 4 ft 8+12 in (1,435 mm)

The Southern Railway (SR) gave the designation 4-LAV to the electric multiple units built to work the semi-fast services on the route between London and Brighton. None of these units survived long enough in British Rail ownership to be allocated a TOPS class.

Contents

Construction

The original series of 4-LAV (4-car Lavatory stock) units, (numbers 1921–1953), were built at Eastleigh carriage works during 1931 and 1932 for use on the newly electrified London to Brighton line. They were fitted with four Metropolitan-Vickers 275 h.p. traction motors. Despite the prominence given to the lavatory provision in the SR designation, there was actually only one vehicle containing lavatories in the whole four-car unit, and due to the lack of corridors in the unit, only passengers in that coach had access to them. The units were renumbered 2921–2953 in the January/February 1937 renumbering of SR EMUs.

Two further units, (numbers 2954 and 2955) were added to stock in 1940, under the direction of Oliver Bulleid. These were fitted with English Electric 275 h.p. traction motors. [1]

The DMBT (Driving Motor Brake Third) had a full-width cab with a guard's compartment behind, and seven third class compartments seating 70. The TC (Trailer Composite) had five first-class and four third-class compartments seating 40 in each class. The TCL (Trailer Composite with Lavatory) had five first-class and three third-class compartments seating 30 and 24, respectively, with a toilet at each end.

One unit, number 2926, was fitted with one 2-HAL type motor coach. [2]

Use

Throughout their careers they operated the slower services on the London to Brighton line between either London Bridge or Victoria and Brighton railway station. They were also used on stopping trains on the Arun Valley Line and on the Sussex coast lines to the east and west of Brighton.

Formations

Initial formations of these units were as follows (cars not always formed in numerical order):

Unit NumbersDMBTTCLTCDMBT
1921–1953 / 2921–295310501–10565 (odds)12001–1203311501–1153310502–10566 (evens)
2954–295510497–1049911999–1200011534–1153510498–10500

Withdrawal

The majority of the 4-LAV units were withdrawn from ordinary passenger service in 1968, with the final few going in April 1969, being replaced on their duties by new 4-VEP sets. Almost all the units were scrapped, but some of the 1940-built cars survived in departmental (non-revenue earning) use for several more years. However, no 4-LAV stock exists today.

Related Research Articles

<span class="mw-page-title-main">British Rail Class 404</span>

The Southern Railway (SR) gave the designations 4-COR, 4-RES, 4-BUF and 4-GRI to the different types of electric multiple unit built to work the route between London Waterloo and Portsmouth Harbour. The 4-COR type units survived long enough in British Rail ownership to be allocated TOPS Class 404. The COR designation had previously been used for the 6-PUL units and was reused by them during World War II when the Pullman car was stored, but this stock was different from the 4-COR units.

<span class="mw-page-title-main">British Rail Class 423</span> Class of British electric multiple units no longer in active service

The British Rail Class 423, electric multiple unit passenger trains were mostly built by British Rail (BR) at York Works from 1967 to 1974, although the MBSOs and TSOs of the first 20, 7701-7720, were built at Derby Works. They have manually opening doors next to every seating row and were the last coaching stock built in this pattern for BR. They were mostly found working outer-suburban services in South London and rural services in Kent, Sussex and Hampshire, up to 2005 when they were finally replaced by Electrostar and Desiro units. The fleet had a working life of 38 years.

<span class="mw-page-title-main">British Rail Class 308</span> 1959 British electric passenger trains

The British Rail Class 308 alternating current (AC) electric multiple units (EMU) were built by British Railways' Holgate Road carriage works in three batches between 1959 and 1961. They were initially classified as AM8 units before the introduction of TOPS.

<span class="mw-page-title-main">British Rail Class 401</span> British electric train classification

The Southern Railway (SR) gave the designation 2-BIL to the DC third rail electric multiple units built during the 1930s to work long-distance semi-fast services on the newly electrified lines from London to Eastbourne, Portsmouth and Reading. This type of unit survived long enough in British Rail ownership to be allocated TOPS Class 401.

The Southern Railway (SR) gave the designation 2-NOL to the electric multiple units built during the 1930s from old London and South Western Railway carriage bodies on new underframes. None of these units survived long enough in British Rail ownership to be allocated a TOPS class.

The Southern Railway (SR) gave the designation CW to the fleet of AC electric multiple units used on the lines to Coulsdon and Wallington. They were planned by the London, Brighton and South Coast Railway, but were delayed by World War I and the grouping and were introduced by the Southern Railway.

<span class="mw-page-title-main">LNWR electric units</span>

The LNWR electric units were ordered by the London and North Western Railway for its suburban services in London. The first cars, made with Siemens equipment, arrived in 1914, and these were followed by two larger batches of units with Oerlikon equipment. The trains were formed into 3-car units, with first and third class accommodation in open saloons. Following the 1923 grouping and absorption of the line into the London, Midland and Scottish Railway (LMS), similar LMS electric units, but with accommodation in compartments, were purchased to run with the Oerlikon units in 1926 and 1932. The trains were all withdrawn by 1960.

<span class="mw-page-title-main">British Rail Class 313</span> 1976 British electric trains

The British Rail Class 313 was a dual-voltage electric multiple unit (EMU) train built by British Rail Engineering Limited's Holgate Road carriage works between February 1976 and April 1977. They were the first production units that were derived from British Rail's 1971 prototype suburban EMU design which, as the BREL 1972 family, eventually encompassed 755 vehicles over five production classes. They were the first second-generation EMUs to be constructed for British Rail and the first British Rail units with both a pantograph for 25 kV 50 Hz AC overhead lines and contact shoe equipment for 750 V DC third rail supply. They were, additionally, the first units in Britain to employ multi-function automatic Tightlock couplers, which include electrical and pneumatic connections allowing the coupling and uncoupling of units to be performed unassisted by the driver whilst in the cab.

<span class="mw-page-title-main">British Rail Class 432</span>

The British Rail Class 432 (4-REP) electric multiple unit passenger trains were built by BR at York Works from 1966 to 1967 and in 1974. The units were built to power the TC trailer units on services on the South West Main Line. Fifteen four-car units were eventually built. The motor coaches were new build, but the trailers were converted from Mk1 hauled stock. They were initially classified as Class 441 and numbered 3001–3015. This was later changed to Class 430, under which they spent the majority of their working lives. Shortly before withdrawal they were reclassified Class 432 and the units were renumbered as 2001–2015. The fleet had a lifespan of 26 years.

<span class="mw-page-title-main">British Rail Class 416</span>

British Rail Class 416 (2-EPB) was a class of third-rail electric multiple units in service between 1953 and 1995. They were intended for inner suburban passenger services on London's Southern Electric network. There were two subclasses of Class 416: Class 416/1 to an SR design on salvaged 2-NOL underframes, built between 1953 and 1956, and Class 416/2 based on a British Railways Mark 1 coach design.

<span class="mw-page-title-main">British electric multiple units</span> British self-powered electric trains

An electric multiple unit (EMU) is an electric self-powered train, capable of operating in multiple with other EMUs and without the need for a locomotive; these are typically passenger trains with accommodation in every vehicle and a driving position at each end. The term can also be used to describe a train that is a permanent formation with a non-driving power car, such as the Advanced Passenger Train. As of December 2010, two-thirds of the passenger carriages in Great Britain are formed in EMUs.

<span class="mw-page-title-main">British Rail Class 302</span> 1958 British Rail electric multiple unit

The British Rail Class 302 was a type of electric multiple unit (EMU) introduced between 1958 and 1960 for outer suburban passenger services on the London, Tilbury and Southend line. This class of multiple unit was constructed using the Mark 1 bodyshell and was slam-door.

<span class="mw-page-title-main">British Rail Class 414</span> 1956 British electric trains

The British RailClass 414 were two-car electric multiple units that were built between 1956 and 1963. They were withdrawn in 1995.

<span class="mw-page-title-main">British Rail Class 415</span> British Rail coaching stock

The British Rail Class 415 was a suburban 750 V DC third rail electric multiple unit commissioned by the Southern Region of British Railways. Built between 1951 and 1957, it became the most numerous class on the region after the withdrawal of the 4SUBs. The final trains were withdrawn in the 1990s, replaced by Class 455, 456, 465 and 466.

<span class="mw-page-title-main">British Rail Class 506</span>

The British Rail Class 506 was a 3 carriage electric multiple unit (EMU) built for local services between Manchester, Glossop and Hadfield on the Woodhead Line, which was electrified in 1954 on the 1,500 V DC overhead system.

<span class="mw-page-title-main">British Rail Class 203</span>

The British Rail Class 203, initially classified 6B, was a type of diesel-electric train. Seven units, numbered 1031-1037, were constructed in 1958 for use on the Southern Region. They were similar to the earlier Class 202 units, differing only in the substitution of a trailer buffet car for one of the three trailer second opens.

<span class="mw-page-title-main">SR Class 4Sub</span>

The Southern Railway (SR) and the British Railways used the designation Sub to cover a wide variety of electric multiple-unit passenger trains that were used on inner-suburban workings in the South London area. The designation 'Sub' was first officially used in 1941 to refer to newly built 4-car units. However, during the 1940s large numbers of earlier '3-Car Suburban Sets' were increased to four cars by the addition of an 'Augmentation' trailer, and became part of the 4-Sub category. The SR and BR (S) continued to build or else rebuild 4-car units to slightly different designs which became part of the 4-Sub Class. Many of these later examples survived in passenger use until late 1983, by which time British Rail had allocated to them TOPS Class 405.

<span class="mw-page-title-main">Metropolitan Railway electric multiple units</span>

Metropolitan Railway electric multiple units were used on London's Metropolitan Railway after the lines were electrified in the early 20th century.

The NZR 50-foot carriage of 1908 were originally constructed for the North Island Main Trunk (NIMT) passenger trains. The first were clad in Kauri, with open end platforms, however those built from 1930 were clad in steel, with enclosed vestibules. These main line cars were used by the NZR.

<span class="mw-page-title-main">SR class 3Sub</span> Class of British electric multiple units

The class 3SUB were DC suburban electric multiple units introduced by the London and South Western Railway in 1915 and constructed by the Southern Railway in the period up to 1939. The class designation 3SUB was not used by the Southern Railway, although some authors refer to these units as 3SUB. When rebuilt to four cars in the 1940s, they became class 4SUB.

References

  1. The ABC of British Railway Locomotives: Combined Volume, Sixth Edition, Winter 1961/2, Ian Allan Ltd., 1961. p.251.
  2. ABC, 1961 p.251