The British Rail Class 458 Juniper (5-JUP) is a class of electric multiple-unit passenger trains of the Alstom Coradia Juniper family, built at Washwood Heath between 1998 and 2002 for South West Trains.[7] The order for the original fleet of 30 four-car trains was placed in 1997, and delivery of the first unit followed in October 1998.[8] The fleet entered passenger service between 2000 and 2003 and is maintained at Bournemouth depot.[3][9]
Between 2013 and 2016, the class was merged with the mechanically similar Class 460 fleet and extensively rebuilt to form a fleet of 36 five-car units—designated Class 458/5—to provide an increase in capacity on services into London Waterloo.[10] The trains are now used by South Western Railway.[11]
In March 2021, South Western Railway announced that 28 Class 458 units would be refurbished for use on long-distance services on the Portsmouth Direct line, as a result of the company deciding to abandon its original plan to use upgraded Class 442 units for this purpose.[12] By 2024, this plan had been dropped, and the refurbished units were instead deployed on limited services out of London Waterloo from 24 June 2024.
History
South West Trains began operating the South Western franchise in February 1996, having inherited all of its rolling stock from British Rail. While this included a small number of trains built in the late 1980s and a larger number of suburban units delivered between 1982 and 1985, a significant proportion of the overall fleet was formed by much older slam-door First Generation EMUs, such as Classes 411 and 423. In order to begin replacing these older units, SWT issued in November 1996 a request for tenders to supply 30 new air-conditioned four-car EMUs, and in 1997 together with rolling stock lessorPorterbrook awarded to Alstom a £90 million contract for their delivery.[8][13]
Some railway industry commentators noted that SWT were going above and beyond the requirements of their franchise award in placing the order, and speculated that it could be a strategy to allay concerns about the fact that the same company—Stagecoach Group—owned both South West Trains and Porterbrook.[5] This represented a potential conflict of interest at a time when rolling stock leasing companies, and Porterbrook in particular, were being criticised for extracting significant profits from leasing cheaply-acquired ex-BR stock.[14]
A Class 458/0 unit in as-delivered condition, showing the original driver's cab and SWT livery
All 30 units, numbered 458001–458030, were manufactured at the former Metro-Cammell works at Washwood Heath in Birmingham, which Alstom had acquired in 1989.[5][15] Each unit was formed of two motor cars with driver's cabs, an intermediate trailer car, and an intermediate motor car. Both driving cars had small sections of first-class seating, while the intermediate cars were all standard class. The trailer car was provided with a pantograph well and space for an alternating-current transformer, enabling conversion to 25kV50HzACoverhead-line operation if required at a later date.[5] One bogie on each motor car was fitted with traction motors, for a total of 6 motors along the train, a maximum speed of 100 miles per hour (160km/h), and a cumulative power output of 1,620kW (2,000hp).[5] Both driving cars were also provided with end gangways, with the intent of allowing passengers and crew to move between coupled units. They are the only members of the Juniper family to have such provision.[5]
The first unit, 458001, was delivered to SWT for pre-acceptance testing on 31 October 1998.[4] Attempts to place the new class into passenger service were beset by delays and major technical problems. The roofs of the new trains leaked, allowing water ingress to both the driver's cabs and passenger saloons. Onboard electronics repeatedly failed, affecting the air-conditioning and traction systems, and the Train Management System (TMS) software also proved to be unreliable.[5][13] More problems were encountered in coupling process and the design of the end gangways–existing practice with ex-BR stock taught that units could be coupled or uncoupled in the space of just a few minutes, but the Juniper gangway design was significantly more complex and took far longer to operate. Additionally, the entire TMS had to be restarted whenever units were coupled and uncoupled, which meant that the total time taken to couple or uncouple Class 458 units could reach up to 30 minutes. Both of these facts in particular remained considerable limitations on the use of the new fleet; ultimately SWT had no choice but to treat the Junipers as being semi-permanently coupled in pairs.[16] The first Class 458 passenger service eventually ran on 25 February 2000, but even then only two units (458004 and 458005) were available for use.[5]
The original first-class interior of a Class 458/0 unit
By March 2002 twenty-four of the thirty units had been delivered, but on an average day only nine to ten units were actually available for service.[17] The last six units eventually arrived by October 2002, but it was another seven months—May 2003—before the entire fleet had entered service.[5] The protracted and difficult introduction of the Juniper fleet is credited with influencing SWT's decision in April 2001 to replace the rest of its slam-door units with an order of 785 vehicles from the competing SiemensDesiro family.[16][18]
Withdrawal from service
Even after the full complement of units had entered service, reliability remained so poor that in January 2004 South West Trains announced that they would withdraw the entire Class 458 fleet at the December 2005 timetable change in readiness to return them to lessor Porterbrook when the lease on the fleet expired in February 2006.[13] At the time of the announcement the trains were only managing an average of 4,300 miles (6,900km) between major failures, whereas the new Siemens Desiro (Class 450) units—which had only entered service in October 2003—were already achieving an average of 21,000 miles (34,000km) between faults, and the slam-door fleet had regularly managed intervals of circa 50,000 miles (80,000km).[13]
An additional 17 Class 450 units had been ordered to replace the Class 458 fleet, but as these new units would not be delivered for some time yet Porterbrook later agreed with SWT that the Junipers could stay in service on a pay-per-use basis past the original end of the lease. In a separate arrangement units 458001 and 458002 were transferred to Gatwick Express in September 2005 to act as a spare train for that operator, but they were returned to SWT in December 2006 without having been used.[19]
In addition to reliability problems, continued use of the Class 458 fleet was complicated by issues surrounding compliance with the Rail Vehicle Accessibility Regulations (RVAR) 1998. The Regulations, which mandate the accessibility features that vehicle designers and operators need to provide in order to meet the requirements of the Disability Discrimination Act 1995, were in the process of being formulated at the same time as the Class 458 fleet was being designed and the finished units accordingly received temporary exemptions from compliance on a total of 10 different points.[20][21] The exemption relating to the size of the internal passenger information displays expired on 31 July 2006—having already been extended from 30 September 2004—and the Department for Transport declined to provide any further extension.[20][22] SWT fitted replacement displays of a compliant size to eight units for use as stand-by stock, while the remainder of the fleet was placed in storage.[23]
Return to service
In September 2006 the Department for Transport confirmed after a competitive tender process that South West Trains had been awarded a new ten-year contract to operate the South Western franchise, starting in February 2007.[24] As a result of the award, and in keeping with commitments made in its tender, SWT implemented a new rolling-stock plan that called for the withdrawal of its 24 Class 442 units. Class 444 and 450 units would take over the affected services, and the resulting gaps covered by re-activating the Class 458 fleet.[23] There was some speculation from industry observers that this was made possible by Porterbrook significantly reducing the amount of money it charged SWT to lease the Junipers, given that there appeared to be no other operators interested in using the fleet.[23]
Following the December 2006 timetable change, the stored Class 458 units began to return to service, and the Class 442 withdrawal was completed on 24 January 2007.[23] By the end of the following February, observers reported that only four Junipers had not yet been re-activated,[5] and that the general reliability of the fleet had improved so much that units now averaged 17,800 miles (28,600km) between significant failures (defined as causing delays greater than five minutes).[23]
The re-activation process included the fitting of RVAR-compliant internal displays to the entire fleet. The other points of RVAR non-compliance were covered by existing exemptions that remained valid until 31 December 2010.[25]
Refresh and reliability improvements
Between 2008 and 2010 the fleet was 'refreshed' at Bournemouth Traincare Depot, during which process the units were fitted with CCTV, new seats and tables in first class, and modified RVAR-compliant lavatories and doorway lights. The interiors were also cleaned and repainted.[26]
In May 2010, SWT enabled regenerative braking on two Class 458 units as part of trial testing its potential use across both the Juniper and Desiro fleets. The trials were successful and regenerative braking was enabled across all 30 Class 458 units by mid-2011.[27]
By the end of 2012 the fleet was achieving an average distance of 106,049 miles (170,669km) between significant failures; making it the most reliable fleet in Britain and the first to achieve 6-figure mileages.[28] The feat was recognised with a Modern Railways magazine Golden Spanner award in the New Generation EMU category on 23 November 2012.[29]
2013 conversion to Class 458/5
South West Trains had experienced a considerable shortage of passenger capacity on many of its suburban routes in the years up to 2012, which it attributed primarily to the fact that passenger numbers had increased dramatically without a corresponding rise in the size of the operator's fleet.[30] The company had suggested to the Department for Transport on at least three occasions that more Class 450 units should be purchased from Siemens, but had been turned down each time.[31]
As an alternative, Porterbrook proposed to enlarge the Class 458 fleet and reconfigure it for suburban services by using vehicles from the Class 460 fleet, which Porterbrook also owned and which was at that time being released from service with Gatwick Express.[30][32] The process, budgeted at £42 million, would allow for all 30 original Class 458 units to be extended by one vehicle, making them into five-car units, after which there would be six five-car Class 460 units left over. These would be comprehensively rebuilt to match the extended Class 458 units, for a total fleet of 36 five-car units that would be designated Class 458/5.[33] The units of this "new" fleet would be used—either individually or in pairs of ten cars—to provide extra peak-time capacity on suburban services into Waterloo from the Hounslow, Weybridge (via Staines), and Windsor lines. A separate improvements package agreed between SWT and Network Rail provided for platform extensions necessary for ten-car operation at over 60 suburban stations, and for the re-opening of one of the four disused platforms at the former Waterloo International terminal.[34][35][36]
The Department for Transport announced in December 2011 that it had accepted the proposal,[30] and an agreement between Porterbrook and South West Trains was signed in January 2012.[37] South West Trains described the project as advancing its aspiration to become a "10-car railway",[33] and the company's fleet director noted that while the project was "much more complicated ... than buying new trains", it was also "significantly cheaper".[30][31] The primary contract for delivering the project was awarded to Alstom, who appointed Wabtec to perform the conversion work on its behalf.[30]
Separated Class 460 vehicles at Doncaster Works prior to being rebuilt
All 48 intermediate vehicles from the Class 460 fleet were sent to Wabtec's Doncaster Works to be rebuilt and refitted. Twelve of the 16 driving vehicles were rebuilt by Wabtec subsidiary Brush Traction at its workshops in Loughborough, where their original driver's cabs were replaced with newly fabricated versions that included gangways and Voith automatic couplers of the same types used on Class 444 and 450 units.[38][30][39] Four of the selected driving vehicles had been built with luggage compartments, and these were removed and their roller-shutter external doors were replaced with power-operated plug doors like those used on the other vehicles.[40] Together with 18 of the intermediate cars from the Class 460 vehicles, these became the six "new" Class 458/5 units. The remaining 30 Class 460 cars were prepared for insertion into the Class 458/0s.[38]
Two Class 458/5 units soon after being rebuilt. The continuous window band along the vehicle's side only appears on former Class 460 vehicles–original Class 458 vehicles have windows separated by bodywork.
Additional modifications included re-gearing the traction motors to reduce the train's maximum speed from 100mph (161km/h) to 75mph (121km/h), both to reduce the likelihood of overheating when making frequent stops and starts, and because the higher speed was unnecessary on suburban services.[31] New Train Management System (TMS) software was developed to be compatible across the entire Class 458/5 fleet, simplifying maintenance and improving reliability.[30] An Automatic Selective Door Opening (ASDO) system was installed for use at a small number of stations where it was impractical to lengthen platforms.[33] The vehicle interiors were refurbished and reconfigured to provide more standing room for passengers, mainly by changing from 5- to 4-abreast seating and thus allowing a wider aisle.[33][30] The units were also repainted into SWT's blue livery, matching the Class 450 fleet.
SWT expected to receive the first two Class 458/5 units in May 2013—in time for them to enter service the following November—but due to delays in production the initial delivery did not take place until October.[40][39] Following testing and staff training, entry into passenger service was achieved in March 2014.[32][35] Once the first four fully-converted units had been delivered and accepted for service, SWT was able to start sending original Class 458/0 units for rebuilding.[38] These units received the same modifications as the Class 460 conversions, leaving SWT and Porterbrook with a single mechanically homogenous Class 458/5 fleet. The last unmodified original units were withdrawn from service for rebuilding in November 2015, and returned to SWT after completion on 30 March 2016.[23]
At the conclusion of the conversion project four Class 460 vehicles—all of them driving cars with luggage compartments—were superfluous; these were stripped for spare parts and later scrapped.[41]
2022-2024 conversion to Class 458/4
The South Western franchise was transferred from South West Trains to South Western Railway (a FirstGroup/MTR joint venture) in August 2017. Prior to commencing operations, SWR had taken advantage of low finance costs to order from Bombardier Transportation a new fleet of 750 vehicles—now designated Class 701—that would replace Classes 455, 456, 458, and 707 on South Western suburban services from late 2019 onwards.[42] However, continuing delays to the Class 701 programme kept all four older fleets in use into the 2020s.[43][44]
In March 2021 South Western Railway announced that it was abandoning its plans to use refurbished Class 442 units for long-distance services to and from London on the Portsmouth Direct line, citing continuing technical difficulties and future problems complying with accessibility regulations. To make up for the shortfall, 28 Class 458 units are to be refurbished and were planned to be redeployed in their place.[12] The refurbishment was performed by Alstom at Widnes in Cheshire at a cost of £25 million and involved returning each unit to its original four-car formation by removing the Class 460 vehicles, restoring the original maximum speed of 100mph (161km/h), and reconfiguration of the passenger saloons.[45] The reconfigured units will be leased from Porterbrook until 2027 at the earliest and are maintained at Bournemouth Traction and Rolling Stock Maintenance Depot.[3][46][47] The first two units to be sent for refurbishment, 458507 and 458517, arrived at Widnes by mid-August 2022.[48]
Testing for the 458/4s began on 9 October 2023.[49]
In early 2024 it was announced that the plan to use the Class 458/4s on Portsmouth services had been dropped.[50][51] Later, in May 2024, it was announced that the Class 458/4s would instead be used on some limited outer suburban services from London Waterloo.[52] The first Class 458/4 entered service on 24 June 2024.[53]
By late August 2024 10 Class 458/4s had entered service.[54]
The 458/4 conversion and refurbishment was completed on 12 December 2024.[55]
Incidents
On 30 January 2015, a small explosion occurred underneath a driving vehicle of unit 458501 near Windsor & Eton Riverside station. The Rail Accident Investigation Branch determined that this was caused by a join between three underfloor power cables not being secured correctly when the unit was rebuilt in 2014.[56]
On 21 December 2019, unit 458519 was involved in a collision with a car between Wokingham and Bracknell. Nobody was seriously injured.[57][58]
Stagecoach South Western Trains Limited, trading as South West Trains (SWT), was an English train operating company owned by Stagecoach, which operated the South Western franchise between February 1996 and August 2017.
Porterbrook is a British rolling stock company (ROSCO), created as part of the privatisation of British Rail. Together with Angel Trains and Eversholt Rail Group, it is one of the three original ROSCOs.
The British Rail Class 170 Turbostar is a British diesel-hydraulic multiple unit passenger train designed and built by Adtranz, and later by Bombardier Transportation, at Derby Litchurch Lane Works.
The British Rail Class 423, electric multiple unit passenger trains were mostly built by British Rail (BR) at York Works from 1967 to 1974, although the MBSOs and TSOs of the first 20, 7701-7720, were built at Derby Works. They have manually opening doors next to every seating row and were the last coaching stock built in this pattern for BR. They were mostly found working outer-suburban services in South London and rural services in Kent, Sussex and Hampshire, up to 2005 when they were finally replaced by Electrostar and Desiro units. The fleet had a working life of 38 years.
The British Rail Class 159 is a class of British diesel multiple unit passenger trains of the Sprinter family, built in 1989–1992 by British Rail Engineering Limited (BREL)'s Derby Litchurch Lane Works as Class 158. Before entering traffic, the original 22 units were modified at Rosyth Dockyard to Class 159 to operate services from London Waterloo to Salisbury and Exeter St Davids, replacing various locomotive-hauled passenger trains.
The British Rail Class 456 was an electric multiple unit passenger train introduced by Network SouthEast on inner-suburban services in South London to replace the elderly Class 416 2EPB units. Twenty-four two-car units were built by British Rail Engineering Limited's York Carriage Works in 1990 and 1991.
The British Rail Class 460 Juniper (8-GAT) was a class of electric multiple-unit passenger trains built by Alstom at Washwood Heath between 1999 and 2001. They were part of Alstom's Coradia Juniper family, which also includes Classes 334 and 458.
The British Rail Class 450 Desiro is a type of third-rail DC electric multiple unit (EMU) passenger train that entered service during 2003. Used for outer-suburban services, the units were built with both first- and standard-class accommodation. They have a maximum speed of 100 mph (160 km/h).
The British Rail Class 442 (5-WES) Wessex Electrics were electric multiple unit passenger trains introduced in 1988 by Network SouthEast on the South West Main Line from London Waterloo to Weymouth to coincide with the electrification of the line from Bournemouth. Twenty-four five-car units were built by British Rail Engineering Limited's Derby Litchurch Lane Works.
The British Rail Class 323 is a class of electric multiple unit (EMU) passenger train built by Hunslet Transportation Projects and Holec. All 43 units were built from 1992 through to 1995, although mockups and prototypes were built and tested in 1990 and 1991.
The British Rail Class 444 Desiro is an electric multiple-unit passenger train built by Siemens Transportation Systems in Austria between 2002 and 2004. The Class 444 currently operate on express passenger services for South Western Railway.
The British Rail Class 321 is a class of electric multiple unit (EMU) passenger train built by British Rail Engineering Limited's York Carriage Works in three batches between 1988 and 1991 for Network SouthEast and Regional Railways. The class uses alternating current (AC) overhead electrification. The design was successful and led to the development of the similar Class 320 and Class 322.
The British Rail Class 144Pacer are diesel multiple unit (DMU) passenger trains built at Derby between 1986 and 1987. British Rail, seeking to procure improved derivatives of the earlier Class 141, placed an order with the manufacturers British Rail Engineering Limited (BREL) and Walter Alexander to construct their own variant, the Class 144. A total of 23 units were constructed. All units have now retired from mainline service, though the majority of the units have been acquired for preservation on heritage railways and in other uses. As of December 2022, 19 out of the 23 units have been purchased following withdrawal for this purpose, of which 14 units are in operational condition.
The British Rail Class 455 is an electric multiple unit passenger train built by BREL between 1982 and 1985. It is operated on suburban services in Greater London and Surrey by South Western Railway, as well as formerly by Southern.
The British Rail Class 334 Coradia Juniper is a suburban electric multiple unit passenger train built by Alstom in Birmingham. They are part of Alstom's Coradia Juniper family of trains, along with Classes 458 and 460.
The Alstom Coradia Juniper series is a family of electric multiple unit trains built by Alstom Transport Birmingham for use on the railway network in Great Britain. The family is related to the Coradia 1000 series of diesel multiple units.
The British Rail Class 707 is an electric multiple unit passenger train built by Siemens Mobility on its Desiro City platform, and operated in England by Southeastern. The units were previously operated by South Western Railway.
South Western Railway is a British train operating company owned by FirstGroup (70%) and MTR Corporation (30%) that operates the South Western franchise.
The British Rail Class 769 Flex is a class of bi-mode multiple unit (BMU) converted by Brush Traction, and running in service with Northern Trains. The train is a conversion of the existing Class 319 electric multiple unit (EMU), a conventional unit type which had become surplus to requirements during the 2010s.
The British Rail Class 701 Arterio is a class of electric multiple unit passenger train built by Bombardier Transportation at Derby Litchurch Lane Works. Built on the Aventra platform, they are operated by South Western Railway, and operate some services between Waterloo and Windsor. In the future the trains are planned to operate services on the Reading, Windsor and South West London suburban lines.
References
↑ Dunn, Pip (21 August 2024). "First of refurbished SWR 458/4s enter traffic". Network News. Rail Magazine. No.1016. p.21.
1 2 3 "The first refurbished SWR Class 458/4s enter service". News. Railways Illustrated. No.259. September 2024. p.12.
1 2 Lindop, Peter (4 April 2000). "Class 458". www.lococarriage.org.uk/. The Locomotive & Carriage Institution. Retrieved 12 June 2020. 458 – A Fast-Track Development?
1 2 3 4 "Train firm to replace new fleet". BBC News. 12 January 2004. Archived from the original on 13 March 2007. Retrieved 2 July 2008. A commuter rail company is to replace 30 of its newest fleet of trains because they keep breaking down.
↑ "Alstom's first Juniper unit delivered to South West Trains". Rail Magazine. No.344. Peterborough. 18 November – 1 December 1998. p.7. ISSN0953-4563.
↑ Pickering, Graeme (September 2022). "SWR Class 458s are Widnes-bound". The Railway Magazine. No.1458. Horncastle: Mortons Media Group. p.92. ISSN0033-8923.
↑ "Main line testing starts for 4 car 458s". Today's Railways UK. No.262. December 2023. p.60.
↑ "No immediate plan to introduce refurbished '458s'". News Front. Modern Railways. Vol.81, no.905. February 2024. p.9.
↑ Clifton, Paul (7 February 2024). "Why are the Class 701 Arterios more than four years late?". Rail Magazine. No.1002. pp.30–31.
↑ Russell, David (June 2024). "June launch for modified Class 458/4s". Units. Rail Express. No.337. p.22.
Holley, Mel (2–15 December 1998). "Alstom's Juniper production line to complete an SWT unit every fortnight". Rail Magazine. No.345. EMAP Apex Publications. pp.18–19. ISSN0953-4563. OCLC49953699.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
