British Rail Class 306 | |
---|---|
In service | 1949–1981 |
Manufacturer | Metro Cammell and BRCW |
Order no. |
|
Constructed | 1949 [2] |
Refurbished | Rebuilt 1959–1961 [3] |
Number built | 92 trainsets |
Number scrapped | 91 |
Formation | 3 cars per trainset. |
Diagram | BR TOPS codes rebuilt units
|
Design code | AM6 |
Fleet numbers |
|
Capacity |
|
Operator(s) | British Rail |
Depot(s) | Ilford [2] |
Line(s) served | Liverpool Street–Shenfield, Great Eastern Suburban [7] |
Specifications | |
Car body construction | Steel [5] |
Train length | 177 ft 7 in (54.13 m) [3] |
Car length | |
Width | 9 ft 3 in (2.82 m) [4] |
Height | 13 ft 1 in (3.99 m) [3] |
Doors | Bi-parting sliding [3] |
Articulated sections | 3 |
Maximum speed | 75 mph (121 km/h) [3] |
Weight |
|
Traction motors | 4 × Crompton Parkinson [4] |
Power output | 4 × 157 hp (117 kW) [4] |
Electric system(s) |
|
Current collector(s) | Pantograph |
UIC classification | Bo′Bo′+2′2′+2′2′ |
Bogies | Thompson [9] / LNER ED6 / ET6 [5] |
Braking system(s) | Air (EP/Auto) [3] |
Safety system(s) | AWS |
Coupling system | Screw [2] |
Multiple working | Within class |
Track gauge | 4 ft 8+1⁄2 in (1,435 mm) |
The British Rail Class 306 was a fleet of electric multiple unit (EMU) trains introduced in 1949. It consisted of 92 three-car trains which were used on the Great Eastern Main Line between Shenfield and London Liverpool Street.
Class 306 trains were built to a pre-Second World War design by Birmingham Railway Carriage and Wagon Company (Driving Trailer) and Metro Cammell (Driving Motor Brake and Trailer) and were equipped with Metrovick traction equipment Crompton Parkinson traction motors. Each carriage featured two sets of twin pneumatic sliding passenger doors, which could be opened by either the guard or the passengers, who could use buttons fitted inside and outside the doors. The order was placed by the LNER in 1938, but official delivery did not commence until February 1949. [10]
When built the trains were energised at 1,500 V direct current (DC) which was collected from overhead wires by a diamond pantograph located above the cab on the Motor Brake Second Open (MBSO) vehicle.
From 1959 to 1961 the overhead wires were re-energised at 25 kV alternating current (AC) (and 6.25 kV AC in the inner London areas where headroom for the overhead wires was reduced) and the trains were rebuilt to use this different electrical system. A transformer and rectifier unit was fitted to the underframe between the bogies of the intermediate Trailer Brake Second (TBS) and the pantograph, now a more modern Stone Faiveley AMBR design, was moved to the roof of this carriage. Because this reduced the headroom inside the train, the guard's compartment was relocated to be directly below the pantograph. The trains were then numbered 001–092 with the last two digits of each carriage number (LNER coaching series numbers used) the same as the unit number.
Units being made up of three coaches, trains were formed up to three units (nine coaches) [10] although off-peak trains formed of only two units (six coaches) could be seen. This meant that the standard formation could carry 528 seated passengers plus another 696 standing, making 1,224 passengers, compared with about 1,000 passengers in the steam trains that they replaced. [10]
There is a record of a single three-coach unit hauling a Class 47 and train into Chelmsford after the locomotive failed on a London Liverpool Street-to-Norwich express. [11]
The 92 units were originally numbered 01 to 92, becoming 001 to 092 upon conversion for AC operation. Coach numbers were:
In all cases the last two digits of the unit number matched those of the coach numbers. The whole fleet was allocated to Ilford depot.
The Class 306 trains were withdrawn in the early 1980s. Unit 306017 was preserved at Ilford depot; it had been repainted in a near-original green livery, albeit with a yellow warning panel on the front to comply with then-current safety regulations. In the early 2000s it was restored to operational condition by First Great Eastern. [12]
The unit was later in store at MoD Kineton awaiting the resolving of issues such as asbestos contamination. The contamination was removed at Eastleigh Works and the unit was transferred by rail to the East Anglian Railway Museum in June 2011 for display as an exhibit, under a four-year loan agreement from the National Railway Museum. It was moved to Locomotion: the National Railway Museum at Shildon in October 2018 so that it could be assessed before restoration. [13] It is scheduled to move to York when space becomes available. [12] [14]
The British Rail Class 312 alternating current (AC) electric multiple units (EMUs) were built between 1975 and 1978 for use on outer-suburban passenger services. It was the last class of multiple unit to be constructed with the British Rail Mark 2 bodyshell, as well as the last class of multiple unit to be built with slam doors in Britain. These features contributed to their relatively early withdrawal at 25–28 years old, compared with a typical EMU life expectancy of 30–40 years.
The British Rail Class 73 is a British electro-diesel locomotive. The type is unusual in that it can operate from the Southern Region's 650/750 V DC third-rail or an on-board diesel engine to allow it to operate on non-electrified routes. This makes it very versatile, although the diesel engine produces less power than is available from the third-rail supply so the locomotives are rarely operated outside of the former Southern Region of British Rail. Following the withdrawal and scrapping of the more powerful Class 74 electro-diesels in 1977, the Class 73 was unique on the British railway network until the introduction of the Class 88 electro-diesels in 2017. Ten locomotives have been scrapped.
The British Rail Class 308 alternating current (AC) electric multiple units (EMU) were built by British Railways' Holgate Road carriage works in three batches between 1959 and 1961. They were initially classified as AM8 units before the introduction of TOPS.
The British Rail Class 311 alternating current (AC) electric multiple units (EMU) were built by Cravens at Sheffield from 1966 to 1967. They were intended for use on the line from Glasgow Central to Gourock and Wemyss Bay, which was electrified in 1967.
The PEP Stock were prototype electric multiple units used on British Rail's Southern and Scottish Regions during the 1970s and early 1980s. They were forerunners of the British Rail Second Generation electric multiple unit fleet. Three units were built, one two-car unit (2001), and two four-car units (4001/4002). Under TOPS, the driving cars were originally classified as Class 461 with the non-driving motor cars as Class 462. They were later reclassified as Class 445 (4PEP) and Class 446 (2PEP).
The British Rail Class 313 is a dual-voltage electric multiple unit (EMU) train built by British Rail Engineering Limited's Holgate Road carriage works between February 1976 and April 1977. They were the first production units that were derived from British Rail's 1971 prototype suburban EMU design which, as the BREL 1972 family, eventually encompassed 755 vehicles over five production classes. They were the first second-generation EMUs to be constructed for British Rail and the first British Rail units with both a pantograph for 25 kV 50 Hz AC overhead lines and contact shoe equipment for 750 V DC third rail supply. They were, additionally, the first units in Britain to employ multi-function automatic Tightlock couplers, which include electrical and pneumatic connections allowing the coupling and uncoupling of units to be performed unassisted by the driver whilst in the cab.
The British Rail Class 307 electric multiple units were built by BR at Eastleigh Works from 1954 to 1956. They were initially classified as AM7 before the introduction of TOPS.
The British RailClass 303 electric multiple units, also known as "Blue Train" units, were introduced in 1960 for the electrification of the North Clyde and the Cathcart Circle lines in Strathclyde. They were initially classified as AM3 units before the introduction of the TOPS classification system, and were the dominant EMU on the Glasgow suburban railway network for over 25 years before being progressively phased out by newer rolling stock. The final units were withdrawn from service in 2002. The fleet's lifespan was 42 years.
The British Rail Class 71 was an electric locomotive used on the Southern Region of British Railways. Unlike Southern Region electro-diesel locomotives they could not operate away from the electrified system.
The British Rail Class 310 was a slam-door, alternating current (AC) electric multiple unit (EMU) introduced in 1965 as part of the West Coast Main Line electrification project. They were initially classified as Class AM10 units before the introduction of the TOPS classification system. Constructed at BR's Derby Carriage and Wagon Works. They consisted of four carriages - a second class driving trailer, a second class trailer, a second class motor car and a composite driving trailer. The maximum speed was 75 miles per hour (121 km/h). A glass partition behind the driver's cab enabled passengers in the leading and rear coaches to view the line ahead or behind.
The British Rail Class 76, also known as Class EM1, is a class of 1.5 kV DC, Bo+Bo electric locomotive designed for use on the now-closed Woodhead Line in Northern England.
The British Rail Class 318 is an electric multiple-unit (EMU) passenger train which operates in west central Scotland. The units were introduced on 29 September 1986 as part of the electrification of the Ayrshire Coast Line between Glasgow Central and Ayr/Ardrossan with alternating current (AC) overhead lines. Their use was extended to Largs in January 1987. They were also used on the Inverclyde Line in small numbers. The trains currently operate Argyle Line, Cathcart Circle Line, North Clyde Line, Whifflet Line and Inverclyde Line services. Following the withdrawal of the Class 314 fleet in 2019, these units are the oldest working EMUs in Scotland, having been in revenue-earning service for more than 36 years.
The British Rail Class 315 was a fleet of alternating current (AC) electric multiple unit (EMU) trains, built by British Rail Engineering Limited at Holgate Road Carriage Works in York between 1980 and 1981; they replaced the Class 306 units. It was the fifth and final variant of unit derived from British Rail's 1971 prototype suburban EMU design which, as the BREL 1972 family, eventually encompassed 755 vehicles across Classes 313, 314, 315, 507 and 508. Revenue services with Class 315 units commenced in 1980 and continued until December 2022.
An electric multiple unit (EMU) is an electric self-powered train, capable of operating in multiple with other EMUs and without the need for a locomotive; these are typically passenger trains with accommodation in every vehicle and a driving position at each end. The term can also be used to describe a train that is a permanent formation with a non-driving power car, such as the Advanced Passenger Train. As of December 2010, two-thirds of the passenger carriages in Great Britain are formed in EMUs.
An electric multiple unit or EMU is a multiple-unit train consisting of self-propelled carriages using electricity as the motive power. An EMU requires no separate locomotive, as electric traction motors are incorporated within one or a number of the carriages. An EMU is usually formed of two or more semi-permanently coupled carriages, but electrically powered single-unit railcars are also generally classed as EMUs. The great majority of EMUs are passenger trains, but versions also exist for carrying mail.
The British Rail Class 302 was a type of electric multiple unit (EMU) introduced between 1958 and 1960 for outer suburban passenger services on the London, Tilbury and Southend line. This class of multiple unit was constructed using the Mark 1 bodyshell and was slam-door.
The British Rail Class 304 were AC electric multiple units designed and produced at British Rail's (BR) Wolverton Works.
The British Rail Class 305 was an alternating current (AC) electric multiple unit (EMU). Under the pre-1973 British Rail numbering system, the class was known as AM5. When TOPS was introduced, the class became Class 305.
The British Rail Class 506 was a 3 carriage electric multiple unit (EMU) built for local services between Manchester, Glossop and Hadfield on the Woodhead Line, which was electrified in 1954 on the 1,500 V DC overhead system.
The Networker is a family of passenger trains which operate on the UK railway system. They were built in the late 1980s and early 1990s by British Rail Engineering Limited and Metro Cammell. The trains were built for the Network SouthEast (NSE) sector of British Rail, which is where their name comes from. They are all multiple-unit trains.
{{cite web}}
: CS1 maint: unfit URL (link)