Cleveland Dyke

Last updated

The Cleveland Dyke (or Armathwaite Dyke, Cleveland-Armathwaite Dyke or Armathwaite-Cleveland Dyke) [1] is an igneous intrusion which extends from Galloway in southern Scotland through Cumbria and County Durham in northern England to the North York Moors in North Yorkshire.

The dyke is associated with volcanism which took place at the Isle of Mull igneous centre in western Scotland during the early Palaeogene Period at a time of regional crustal tension associated with the opening of the north Atlantic Ocean and which resulted in the intrusion of innumerable dykes. The Cleveland Dyke has been dated to 55.8+/- 0.9 Ma. Though generally from 22 to 28 m wide, in places it is up to 30 metres (98 ft) wide and has been mapped over a distance of 430 kilometres (270 mi). [2] It is the most significant of a swarm of such intrusions associated with the Mull centre which extend southeastwards through this region, the others being the Acklington Dyke and the Blyth and Sunderland subswarms of Northumberland and Tyne and Wear.

It was thought traditionally that the entire dyke comprising some 85 cubic kilometres (20 cu mi) of rock was emplaced as a single pulse of magma over a few days, moving southeastwards from Mull but also rising vertically through the country rock, this mechanism leading in places to the development of en echelon segments of dyke. [3] However, more recent work suggests that vertical emplacement as a series of thin blades of magma from a series of high level chambers within the crust is more likely. [4] Offsets of the alignment occur within Scotland where the dyke crosses Caledonide fault systems. [5] The dyke is composed of basaltic andesite which is amygdaloidal in places. [6]

The dyke has been worked for roadstone at numerous localities including Barrock Fell near Armathwaite in Cumbria and at both Cockfield Fell and Bolam in County Durham. [7] Setts for road construction were made from the dyke at Langbaurgh. [8]

Related Research Articles

<span class="mw-page-title-main">Gneiss</span> Common high-grade metamorphic rock

Gneiss is a common and widely distributed type of metamorphic rock. It is formed by high-temperature and high-pressure metamorphic processes acting on formations composed of igneous or sedimentary rocks. Gneiss forms at higher temperatures and pressures than schist. Gneiss nearly always shows a banded texture characterized by alternating darker and lighter colored bands and without a distinct cleavage.

<span class="mw-page-title-main">Dike (geology)</span> A sheet of rock that is formed in a fracture of a pre-existing rock body

A dike or dyke, in geological usage, is a sheet of rock that is formed in a fracture of a pre-existing rock body. Dikes can be either magmatic or sedimentary in origin. Magmatic dikes form when magma flows into a crack then solidifies as a sheet intrusion, either cutting across layers of rock or through a contiguous mass of rock. Clastic dikes are formed when sediment fills a pre-existing crack.

<span class="mw-page-title-main">Sill (geology)</span> Tabular intrusion between older layers of rock

In geology, a sill is a tabular sheet intrusion that has intruded between older layers of sedimentary rock, beds of volcanic lava or tuff, or along the direction of foliation in metamorphic rock. A sill is a concordant intrusive sheet, meaning that a sill does not cut across preexisting rock beds. Stacking of sills builds a sill complex and a large magma chamber at high magma flux. In contrast, a dike is a discordant intrusive sheet, which does cut across older rocks. Sills are fed by dikes, except in unusual locations where they form in nearly vertical beds attached directly to a magma source. The rocks must be brittle and fracture to create the planes along which the magma intrudes the parent rock bodies, whether this occurs along preexisting planes between sedimentary or volcanic beds or weakened planes related to foliation in metamorphic rock. These planes or weakened areas allow the intrusion of a thin sheet-like body of magma paralleling the existing bedding planes, concordant fracture zone, or foliations.

<span class="mw-page-title-main">Layered intrusion</span>

A layered intrusion is a large sill-like body of igneous rock which exhibits vertical layering or differences in composition and texture. These intrusions can be many kilometres in area covering from around 100 km2 (39 sq mi) to over 50,000 km2 (19,000 sq mi) and several hundred metres to over one kilometre (3,300 ft) in thickness. While most layered intrusions are Archean to Proterozoic in age, they may be any age such as the Cenozoic Skaergaard intrusion of east Greenland or the Rum layered intrusion in Scotland. Although most are ultramafic to mafic in composition, the Ilimaussaq intrusive complex of Greenland is an alkalic intrusion.

<span class="mw-page-title-main">Igneous intrusion</span> Body of intrusive igneous rocks

In geology, an igneous intrusion is a body of intrusive igneous rock that forms by crystallization of magma slowly cooling below the surface of the Earth. Intrusions have a wide variety of forms and compositions, illustrated by examples like the Palisades Sill of New York and New Jersey; the Henry Mountains of Utah; the Bushveld Igneous Complex of South Africa; Shiprock in New Mexico; the Ardnamurchan intrusion in Scotland; and the Sierra Nevada Batholith of California.

<span class="mw-page-title-main">Glenridding Dodd</span>

Glenridding Dodd is a small fell in the English Lake District, at the end of a ridge descending from the Helvellyn range in the Eastern Fells. It stands above the village of Glenridding and on the western shore of Ullswater. Although small and not of great elevation, its top is a fine viewpoint for Ullswater and for the fells clustered round the valleys above Patterdale.

<span class="mw-page-title-main">North Atlantic Igneous Province</span> Large igneous province in the North Atlantic, centered on Iceland

The North Atlantic Igneous Province (NAIP) is a large igneous province in the North Atlantic, centered on Iceland. In the Paleogene, the province formed the Thulean Plateau, a large basaltic lava plain, which extended over at least 1.3 million km2 (500 thousand sq mi) in area and 6.6 million km3 (1.6 million cu mi) in volume. The plateau was broken up during the opening of the North Atlantic Ocean leaving remnants preserved in north Ireland, west Scotland, the Faroe Islands, northwest Iceland, east Greenland, western Norway and many of the islands located in the north eastern portion of the North Atlantic Ocean. The igneous province is the origin of the Giant's Causeway and Fingal's Cave. The province is also known as Brito–Arctic province and the portion of the province in the British Isles is also called the British Tertiary Volcanic Province or British Tertiary Igneous Province.

<span class="mw-page-title-main">Skiddaw Group</span>

For the Skiddaw group of hills, see Skiddaw Group

<span class="mw-page-title-main">Sherwood Sandstone Group</span>

The Sherwood Sandstone Group is a Triassic lithostratigraphic group which is widespread in Britain, especially in the English Midlands. The name is derived from Sherwood Forest in Nottinghamshire which is underlain by rocks of this age. It has economic importance as the reservoir of the Morecambe Bay gas field, the second largest gas field in the UK.

<span class="mw-page-title-main">Geology of the Isle of Skye</span>

The geology of the Isle of Skye in Scotland is highly varied and the island's landscape reflects changes in the underlying nature of the rocks. A wide range of rock types are exposed on the island, sedimentary, metamorphic and igneous, ranging in age from the Archaean through to the Quaternary.

The geology of County Durham in northeast England consists of a basement of Lower Palaeozoic rocks overlain by a varying thickness of Carboniferous and Permo-Triassic sedimentary rocks which dip generally eastwards towards the North Sea. These have been intruded by a pluton, sills and dykes at various times from the Devonian Period to the Palaeogene. The whole is overlain by a suite of unconsolidated deposits of Quaternary age arising from glaciation and from other processes operating during the post-glacial period to the present. The geological interest of the west of the county was recognised by the designation in 2003 of the North Pennines Area of Outstanding Natural Beauty as a European Geopark.

<span class="mw-page-title-main">Exmoor Group</span>

The Exmoor Group is a late Devonian to early Carboniferous lithostratigraphic group in southwest England whose outcrop extends from Croyde in north Devon east across Exmoor to Minehead in west Somerset. The group comprises the following formations the:

The geology of Northumberland in northeast England includes a mix of sedimentary, intrusive and extrusive igneous rocks from the Palaeozoic and Cenozoic eras. Devonian age volcanic rocks and a granite pluton form the Cheviot massif. The geology of the rest of the county is characterised largely by a thick sequence of sedimentary rocks of Carboniferous age. These are intruded by both Permian and Palaeogene dykes and sills and the whole is overlain by unconsolidated sediments from the last ice age and the post-glacial period. The Whin Sill makes a significant impact on Northumberland's character and the former working of the Northumberland Coalfield significantly influenced the development of the county's economy. The county's geology contributes to a series of significant landscape features around which the Northumberland National Park was designated.

The Acklington Dyke is an igneous intrusion which extends from northwest of Hawick in southern Scotland east-southeastwards through the Borders region towards the North Sea coast of Northumberland in northern England.The dyke is associated with volcanism which took place at the Isle of Mull igneous centre in western Scotland during the early Palaeogene Period at a time of regional crustal tension associated with the opening of the north Atlantic Ocean and which resulted in the intrusion of innumerable dykes. The similar Cleveland Dyke has been dated to 55.8+/- 0.9 Ma. The dyke is composed of tholeiitic microgabbro and basalt Though generally thinner, it is up to 30 m wide in places. It is one of the most significant of a swarm of such intrusions associated with the Mull centre which extend southeastwards through this region, the others being the Cleveland Dyke and the Blyth and Sunderland subswarms of Northumberland and Tyne and Wear. They are grouped as part of the Mull Dyke Swarm which in turn is a part of the North Britain Palaeogene Dyke Suite

This article describes the geology of the Broads, an area of East Anglia in eastern England characterised by rivers, marshes and shallow lakes (‘broads’). The Broads is designated as a protected landscape with ‘status equivalent to a national park’.

The geology of Northumberland National Park in northeast England includes a mix of sedimentary, intrusive and extrusive igneous rocks from the Palaeozoic and Cenozoic eras. Devonian age volcanic rocks and a granite pluton form the Cheviot massif. The geology of the rest of the national park is characterised largely by a thick sequence of sedimentary rocks of Carboniferous age. These are intruded by Permian dykes and sills, of which the Whin Sill makes a significant impact in the south of the park. Further dykes were intruded during the Palaeogene period. The whole is overlain by unconsolidated sediments from the last ice age and the post-glacial period.

<span class="mw-page-title-main">Volcanic and igneous plumbing systems</span> Magma chambers

Volcanic and igneous plumbing systems (VIPS) consist of interconnected magma channels and chambers which are responsible for the production, storage and transportation of magma in Earth's crust. Volcanic plumbing systems can be found in all active tectonic settings, such as mid-oceanic ridges, subduction zones, and mantle plumes, when magmas generated in continental lithosphere, oceanic lithosphere, and in the sub-lithospheric mantle are transported. Magma is first generated by partial melting, followed by segregation and extraction from the source rock to separate the melt from the solid. As magma propagates upwards, a self-organised network of magma channels develops, transporting the melt from lower crust to upper regions. Channelled ascent mechanisms include the formation of dykes and ductile fractures that transport the melt in conduits. For bulk transportation, diapirs carry a large volume of melt and ascent through the crust. When magma stops ascending, or when magma supply stops, magma emplacement occurs. Different mechanisms of emplacement result in different structures, including plutons, sills, laccoliths and lopoliths.

The geology of the North York Moors National Park in northern England is provided largely by a thick southerly dipping sequence of sedimentary rocks deposited in the Cleveland Basin during the Jurassic Period. A series of ice ages during the Quaternary period has left a variety of glacial deposits, particularly around the margins of the National Park.

References

  1. "BGS Lexicon of Named Rocks". British Geological Survey. Retrieved 19 January 2019.
  2. "BGS Lexicon of Named Rock Units - Result Details".
  3. Stone, P. et al 2010 British Regional Geology: Northern England (5th Edition) (Keyworth, Nottingham. British Geological Survey) p184-5
  4. Dagley, P.; Skelhorn, R. R.; Mussett, A. E.; James, S.; Walsh, J. N. (2008). "The Cleveland Dyke in southern Scotland". Scottish Journal of Geology. 44 (2): 123–138. doi:10.1144/sjg44020123. S2CID   129786500.
  5. Stone, P. et al 2012 British Regional Geology: South of Scotland (4th Edition) (Keyworth, Nottingham. British Geological Survey) p172-3
  6. "BGS Lexicon of Named Rock Units - Result Details".
  7. Stone, P. et al 2010 British Regional Geology: Northern England (5th Edition) (Keyworth, Nottingham. British Geological Survey) p243
  8. "Mine Explorer" (PDF).