Data logger

Last updated
Data logger Cube storing technical and sensor data Datalogger.jpg
Data logger Cube storing technical and sensor data

A data logger (also datalogger or data recorder) is an electronic device that records data over time or about location either with a built-in instrument or sensor or via external instruments and sensors. Increasingly, but not entirely, they are based on a digital processor (or computer), and called digital data loggers (DDL). They generally are small, battery-powered, portable, and equipped with a microprocessor, internal memory for data storage, and sensors. Some data loggers interface with a personal computer and use software to activate the data logger and view and analyze the collected data, while others have a local interface device (keypad, LCD) and can be used as a stand-alone device.

Contents

Data loggers vary from general-purpose types for a range of measurement applications to very specific devices for measuring in one environment or application type only. It is common for general purpose types to be programmable; however, many remain as static machines with only a limited number or no changeable parameters. Electronic data loggers have replaced chart recorders in many applications.

One of the primary benefits of using data loggers is the ability to automatically collect data on a 24-hour basis. Upon activation, data loggers are typically deployed and left unattended to measure and record information for the duration of the monitoring period. This allows for a comprehensive, accurate picture of the environmental conditions being monitored, such as air temperature and relative humidity.

The cost of data loggers has been declining over the years as technology improves and costs are reduced. Simple single-channel data loggers cost as little as $25. More complicated loggers may cost hundreds or thousands of dollars.

Data formats

Standardization of protocols and data formats has been a problem but is now growing in the industry and XML, JSON, and YAML are increasingly being adopted for data exchange. The development of the Semantic Web and the Internet of Things is likely to accelerate this present trend.

Instrumentation protocols

Several protocols have been standardized including a smart protocol, SDI-12, that allows some instrumentation to be connected to a variety of data loggers. The use of this standard has not gained much acceptance outside the environmental industry. SDI-12 also supports multi-drop instruments. Some data logging companies are also now supporting the MODBUS standard. This has been used traditionally in the industrial control area, and many industrial instruments support this communication standard. Another multi-drop protocol that is now starting to become more widely used is based upon CAN-Bus (ISO 11898). Some data loggers use a flexible scripting environment to adapt themselves to various non-standard protocols.

Data logging versus data acquisition

The terms data logging and data acquisition are often used interchangeably. However, in a historical context, they are quite different. A data logger is a data acquisition system, but a data acquisition system is not necessarily a data logger.

Applications

Data logger application for weather station at P2I LIPI Data logger application for weather station.jpg
Data logger application for weather station at P2I LIPI

Applications of data logging include:

Examples

Future directions

Data Loggers are changing more rapidly now than ever before. The original model of a stand-alone data logger is changed to one of a device that collects data but also has access to wireless communications for alarming of events, automatic reporting of data, and remote control. Data loggers are beginning to serve web pages for current readings, e-mail their alarms, and FTP their daily results into databases or direct to the users. Very recently, there is a trend to move away from proprietary products with commercial software to open-source software and hardware devices. The Raspberry Pi single-board computer is among others a popular platform hosting real-time Linux or preemptive-kernel Linux operating systems with many

See also

Related Research Articles

<span class="mw-page-title-main">Telemetry</span> Data and measurements transferred from a remote location to receiving equipment for monitoring

Telemetry is the in situ collection of measurements or other data at remote points and their automatic transmission to receiving equipment (telecommunication) for monitoring. The word is derived from the Greek roots tele, 'remote', and metron, 'measure'. Systems that need external instructions and data to operate require the counterpart of telemetry: telecommand.

Instrumentation is a collective term for measuring instruments, used for indicating, measuring and recording physical quantities. It is also a field of study about the art and science about making measurement instruments, involving the related areas of metrology, automation, and control theory. The term has its origins in the art and science of scientific instrument-making.

<span class="mw-page-title-main">Keystroke logging</span> Action of recording the keys struck on a keyboard

Keystroke logging, often referred to as keylogging or keyboard capturing, is the action of recording (logging) the keys struck on a keyboard, typically covertly, so that a person using the keyboard is unaware that their actions are being monitored. Data can then be retrieved by the person operating the logging program. A keystroke recorder or keylogger can be either software or hardware.

<span class="mw-page-title-main">Data acquisition</span> Process of sampling signals from sensors and converting into digital data

Data acquisition is the process of sampling signals that measure real-world physical conditions and converting the resulting samples into digital numeric values that can be manipulated by a computer. Data acquisition systems, abbreviated by the acronyms DAS,DAQ, or DAU, typically convert analog waveforms into digital values for processing. The components of data acquisition systems include:

<span class="mw-page-title-main">Accelerometer</span> Device that measures proper acceleration

An accelerometer is a tool that measures proper acceleration. Proper acceleration is the acceleration of a body in its own instantaneous rest frame; this is different from coordinate acceleration, which is acceleration in a fixed coordinate system. For example, an accelerometer at rest on the surface of the Earth will measure an acceleration due to Earth's gravity, straight upwards of g ≈ 9.81 m/s2. By contrast, accelerometers in free fall will measure zero.

<span class="mw-page-title-main">Video camera</span> Camera used for electronic motion picture acquisition

A video camera is an optical instrument that captures videos. Video cameras were initially developed for the television industry but have since become widely used for a variety of other purposes.

Wireless sensor networks (WSNs) refer to networks of spatially dispersed and dedicated sensors that monitor and record the physical conditions of the environment and forward the collected data to a central location. WSNs can measure environmental conditions such as temperature, sound, pollution levels, humidity and wind.

<span class="mw-page-title-main">On-board diagnostics</span> Automotive engineering terminology

On-board diagnostics (OBD) is a term referring to a vehicle's self-diagnostic and reporting capability. In the United States, this self diagnostic is a requirement to comply with Federal Emissions standards to detect failures that may increase the vehicle tailpipe emissions to more than 150% of the standard to which it was originally certified.

<span class="mw-page-title-main">Automatic weather station</span> Meteorological instrument

An automatic weather station (AWS) is an automated version of the traditional weather station, either to save human labor or to enable measurements from remote areas. An AWS will typically consist of a weather-proof enclosure containing the data logger, rechargeable battery, telemetry (optional) and the meteorological sensors with an attached solar panel or wind turbine and mounted upon a mast. The specific configuration may vary due to the purpose of the system. The system may report in near real time via the Argos System, LoRa and the Global Telecommunications System, or save the data for later recovery.

Direct digital control is the automated control of a condition or process by a digital device (computer). Direct digital control takes a centralized network-oriented approach. All instrumentation is gathered by various analog and digital converters which use the network to transport these signals to the central controller. The centralized computer then follows all of its production rules and causes actions to be sent via the same network to valves, actuators, and other heating, ventilating, and air conditioning components that can be adjusted.

SDI-12 is an asynchronous serial communications protocol for intelligent sensors that monitor environment data. These instruments are typically low-power, are used at remote locations, and usually communicate with a data logger or other data acquisition device. The protocol follows a client-server configuration whereby a data logger requests data from the intelligent sensors, each identified with a unique address.

An event data recorder (EDR), more specifically motor vehicle event data recorder (MVEDR), similar to an accident data recorder, (ADR) sometimes referred to informally as an automotive black box, is a device installed in some automobiles to record information related to traffic collisions. In the USA EDRs must meet federal standards, as described within the U.S. Code of Federal Regulations.

Dust Networks, Inc. is an American company specializing in the design and manufacture of wireless sensor networks for industrial applications including process monitoring, condition monitoring, asset management, Environment, Health and Safety (EHS) monitoring and power management. They were acquired by Linear Technology, Inc in December 2011, which in turn was acquired by Analog Devices, Inc in 2017. The Dust Networks product team operates in the IoT Networking Platforms group of Analog Devices.

<span class="mw-page-title-main">Brüel & Kjær</span> Danish multinational company

Brüel & Kjær was a Danish multinational engineering and electronics company headquartered in Nærum, near Copenhagen. It was the largest producer in the world of equipment for acoustic and vibrational measurements Brüel & Kjær is a subsidiary of Spectris.

RACELOGIC Ltd is a technology company based in Buckingham, United Kingdom.

<span class="mw-page-title-main">Shock and vibration data logger</span>

A shock data logger or vibration data logger is a measurement instrument that is capable of autonomously recording shocks or vibrations over a defined period of time. Digital data is usually in the form of acceleration and time. The shock and vibration data can be retrieved, viewed and evaluated after it has been recorded.

A temperature data logger, also called temperature monitor, is a portable measurement instrument that is capable of autonomously recording temperature over a defined period of time. The digital data can be retrieved, viewed and evaluated after it has been recorded. A data logger is commonly used to monitor shipments in a cold chain and to gather temperature data from diverse field conditions.

<span class="mw-page-title-main">Shock detector</span> Indicator of physical shock or impact

A shock detector, shock indicator, or impact monitor is a device which indicates whether a physical shock or impact has occurred. These usually have a binary output (go/no-go) and are sometimes called shock overload devices. Shock detectors can be used on shipments of fragile valuable items to indicate whether a potentially damaging drop or impact may have occurred. They are also used in sports helmets to help estimate if a dangerous impact may have occurred.

<span class="mw-page-title-main">Photovoltaic system performance</span>

Photovoltaic system performance is a function of the climatic conditions, the equipment used and the system configuration. PV performance can be measured as the ratio of actual solar PV system output vs expected values, the measurement being essential for proper solar PV facility's operation and maintenance. The primary energy input is the global light irradiance in the plane of the solar arrays, and this in turn is a combination of the direct and the diffuse radiation.

References

  1. Riva, Marco; Piergiovanni, Schiraldi, Luciano; Schiraldi, Alberto (January 2001). "Performances of time-temperature indicators in the study of temperature exposure of packaged fresh foods". Packaging Technology and Science. 14 (1): 1–39. doi:10.1002/pts.521.
  2. Singh, J; Singh, Burgess (2007). "Measurement, Analysis, and Comparison of the Parcel Shipping Shock and Drop Environment of the United States Postal Service with Commercial Carriers". Journal of Testing and Evaluation. 35 (3): 100787. doi:10.1520/JTE100787.