European Spallation Source

Last updated
European Spallation Source ERIC
European Spallation Source Aerial View.jpg
Scientific Purpose: Provide unique information about the structure and properties of materials across the spectrum of biology, chemistry, physics, and engineering.
Location Lund, Sweden
Proposer ERIC
Project website ess.eu
StatusUnder construction
Type Research Laboratories
Start date2013
Completion date2025
ESS logo ESS logotype cyan S.png
ESS logo

The European Spallation Source ERIC (ESS) is a multi-disciplinary research facility currently under construction, [1] in Lund, Sweden, [2] while its Data Management and Software Centre (DMSC) is situated in Copenhagen, Denmark. [3] [4] The 13 European member countries are partners in the construction and operation of ESS. [5] ESS is scheduled to begin its scientific user program in 2023, with the construction phase set to be completed by 2025. [6] ESS will enable scientists to observe and understand basic atomic structures and forces, which is not achievable with other neutron sources in terms of lengths and time scales. [7] The research facility is located close to the Max IV Laboratory, which conducts synchrotron radiation research. The construction of the facility began in the summer of 2014 and the first science results are planned for 2023.

Contents

During the operation, ESS will use nuclear spallation, a process in which neutrons are liberated from heavy elements by high energy protons. This is intrinsically a much safer process than uranium fission. This facility was an example of a "long pulse" source (milli-seconds). [8] [9]

The facility consists of a linear accelerator, in which protons are accelerated and collide with a rotating, helium-cooled tungsten target, generating intense pulses of neutrons. Surrounding the tungsten are baths of cryogenic hydrogen, which feed neutron supermirror guides. The operation is similar way to optical fibres, directing the intense beams of neutrons to experimental stations, where research is performed on a range of materials.

Neutron scattering can be applied to a range of scientific explorations in physics, chemistry, geology, biology, and medicine. Neutrons serve as a unique probe for revealing the structure and function of matter from the microscopic down to the atomic scale, with the potential for development of new materials and processes.

During the construction, ESS became a European Research Infrastructure Consortium, or ERIC, on 1 October 2015.

The European Investment Bank made a €50 million investment in European Spallation Source. This investment is supported by InnovFin-EU Finance for Innovators, [10] an initiative established by the EIB Group in collaboration with the European Commission under Horizon 2020, the EU's research and innovation program. [11] [12]

History

Building of European Spallation Source, January 2017 Building of European Spallation Source, January 2017.jpg
Building of European Spallation Source, January 2017

When the ISIS neutron source was built in England in 1985, its success in producing indirect images of molecular structures eventually raised the possibility of a far more powerful spallation source. By 1993, the European Neutron Scattering Association began to advocate what would be the most ambitious and broad-based spallation source in the world, ESS. [13]

Neutron science soon became a critical tool in the development of industrial and consumer products worldwide. So much so that the Organization for Economic Development (OECD), declared in 1999 that a new generation of high-intensity neutron sources should be built, one each in North America, Asia and Europe. [13] Europe's challenge was its diverse collection of national governments, and an active research community numbering in the thousands. In 2001, a European roadmap for developing accelerator driven systems for nuclear waste incineration estimated that the ESS could have the beam ready for users in 2010. [14] A European international task force gathered in Bonn in 2002 to review the findings and a positive consensus emerged to build ESS. The stakeholders group met a year later to review the task force's progress, and in 2003 a new design concept was adopted that set the course for beginning operations by 2019. [13]

Over the next five years a competitive and yet collaborative site selection process played out and Lund, Sweden was chosen as the preferred site; the definitive selection of Lund was announced in Brussels on 28 May 2009. [13] On 1 July 2010, the staff and operations of ESS Scandinavia were transferred from Lund University to 'European Spallation Source ESS AB', a limited liability company set up to design, construct and operate the European Spallation Source in Lund. The company's headquarters are situated in central Lund. [15]

ESS became a European Research Infrastructure Consortium, or ERIC, on 1 October 2015. The Founding Members of the European Spallation Source ERIC are the Czech Republic, Denmark, Estonia, France, Germany, Hungary, Italy, Norway, Poland, Spain, Sweden, Switzerland and the United Kingdom. [16]

As of 2013 the estimated cost of the facility will be about €1.843 bn. (or $1.958 bn.) Host nations Sweden and Denmark plan to give about half of the sum. However the negotiations about the exact contributions from every partner are still in progress. [17] From 2010 to 30 September 2015, ESS was operated as a Swedish aktiebolag, or AB. [13]

Site selection

Originally, three possible ESS sites were under consideration: Bilbao (Spain), Debrecen (Hungary) and Lund (Sweden). [18]

On 28 May 2009, seven countries indicated support for placing ESS in Sweden. Furthermore, Switzerland and Italy indicated that they would support the site in majority. [19] On 6 June 2009, Spain withdrew the Bilbao candidacy and signed a collaboration agreement with Sweden, supporting Lund as the main site, but with key component development work being performed in Bilbao. This effectively settled the location of the ESS; detailed economical negotiations between the participating countries are now taking place. [20] On 18 December 2009, Hungary also chose to tentatively support ESS in Lund, thus withdrawing the candidacy of Debrecen. [18] [21]

The construction of the facility began in early 2014, with a ground-breaking event held in September of that year. The user programme will start in 2023, and it is planned to be fully operational by 2025. [6] ESS provides weekly updates of construction progress and live construction site webcams on its website.

The linear accelerator

The Accelerator Tunnel (December 2021). ESS Accelerator tunnel 211221.jpg
The Accelerator Tunnel (December 2021).

The ESS uses a linear accelerator [22] (linac) to accelerate a beam of protons from the exit of its ion source at 75 keV to 2 GeV, at the entrance of the accelerator protons are traveling at ~1% of the speed of light and at the end of the accelerator, they reach a velocity of ~95% speed of light. The accelerator uses both normal conducting and superconducting cavities.

The normal conducting cavities are Radio Frequency Quadrupole, RFQ, working at a frequency of 352.21 MHz, and accelerating the proton beam up to an energy of 3.62 MeV. The next structure is a transport line for the medium energy protons, MEBT which transports the beam from the RFQ to the next structure for further acceleration. In the MEBT the beam properties are measured, the beam is cleaned from the transverse halo around the beam, and also the head and tail of the beam pulse are cleaned using a transversally deflecting electromagnetic chopper. The Drift Tube Linac, DTL, which is the structure downstream of the MEBT accelerates the beam further to ~90 MeV. At this energy, there is a transition from normal conducting cavities to superconducting cavities.

Three families of superconducting cavities accelerate the beam to its final energy of 2 GeV, firstly a section using double-spoke cavities up to an energy of ~216 Mev, then two families of elliptical cavities which are optimized for medium and high energy proton acceleration at a frequency of 704.42 MHz. Following the elliptical cavities, a transfer-line guides the beam to the target, and just before sending the beam to the target for producing spallation neutrons expands the beam and paints the target to dissipate the generated heat over a larger area.

The linac repetition rate is 14 Hz, and the pulses of protons are 2.86 ms long, making the duty factor of the linac 4%. The beam current within the pulse is 62.5 mA, and the average beam current is 2.5 mA.

Except in the RFQ which uses the same structure and field to accelerate and focus the beam, the transverse focusing of the beam of protons is performed using magnetic lenses. In the low energy beam transport, right after the ion source, magnetic solenoids are used, in the DTL permanent quadrupole magnets are used and the rest of the linac uses electromagnetic quadrupoles.

The spallation target and its environmental impact

Ongoing installation of the tungsten target wheel, November 2023. Target Wheel 231124.jpg
Ongoing installation of the tungsten target wheel, November 2023.

Neutron Scattering and Imaging Instruments at ESS

The instrument LOKI (December 2021) ESS LOKI.jpg
The instrument LOKI (December 2021)

The target station is surrounded by instrument halls with scientific instruments placed in four sections in the cardinal directions. [30] In the western section, science instruments are located 156 meters from the center of the target station. In the southern one, the distance is between 50 and 80 meters, and the science instruments located closest to the target station are in the northern and eastern sections. [30]

Initially, 15 different scientific instruments will be erected: [31]

Large-scale structures:

Diffraction:

Spectroscopy:

ESSnuSB

The ESS neutrino super beam project aims to generate the most powerful neutrino beam in the world. [32] [33]

See also

Related Research Articles

<span class="mw-page-title-main">Neutron source</span> Device that emits neutrons

A neutron source is any device that emits neutrons, irrespective of the mechanism used to produce the neutrons. Neutron sources are used in physics, engineering, medicine, nuclear weapons, petroleum exploration, biology, chemistry, and nuclear power.

<span class="mw-page-title-main">Linear particle accelerator</span> Type of particle accelerator

A linear particle accelerator is a type of particle accelerator that accelerates charged subatomic particles or ions to a high speed by subjecting them to a series of oscillating electric potentials along a linear beamline. The principles for such machines were proposed by Gustav Ising in 1924, while the first machine that worked was constructed by Rolf Widerøe in 1928 at the RWTH Aachen University. Linacs have many applications: they generate X-rays and high energy electrons for medicinal purposes in radiation therapy, serve as particle injectors for higher-energy accelerators, and are used directly to achieve the highest kinetic energy for light particles for particle physics.

<span class="mw-page-title-main">TRIUMF</span> Particle physics laboratory in Canada

TRIUMF is Canada's national particle accelerator centre. It is considered Canada's premier physics laboratory, and consistently regarded as one of the world's leading subatomic physics research centres. Owned and operated by a consortium of universities, it is on the south campus of one of its founding members, the University of British Columbia in Vancouver, British Columbia, Canada. It houses the world's largest normal conducting cyclotron, a source of 520 MeV protons, which was named an IEEE Milestone in 2010. Its accelerator-focused activities involve particle physics, nuclear physics, nuclear medicine, materials science, and detector and accelerator development.

In nuclear physics, an energy amplifier is a novel type of nuclear power reactor, a subcritical reactor, in which an energetic particle beam is used to stimulate a reaction, which in turn releases enough energy to power the particle accelerator and leave an energy profit for power generation. The concept has more recently been referred to as an accelerator-driven system (ADS) or accelerator-driven sub-critical reactor.

<span class="mw-page-title-main">KEK</span> Japanese high-energy physics organization

The High Energy Accelerator Research Organization, known as KEK, is a Japanese organization whose purpose is to operate the largest particle physics laboratory in Japan, situated in Tsukuba, Ibaraki prefecture. It was established in 1997. The term "KEK" is also used to refer to the laboratory itself, which employs approximately 695 employees. KEK's main function is to provide the particle accelerators and other infrastructure needed for high-energy physics, material science, structural biology, radiation science, computing science, nuclear transmutation and so on. Numerous experiments have been constructed at KEK by the internal and international collaborations that have made use of them. Makoto Kobayashi, emeritus professor at KEK, is known globally for his work on CP-violation, and was awarded the 2008 Nobel Prize in Physics.

<span class="mw-page-title-main">Spallation</span> Physical process

Spallation is a process in which fragments of material (spall) are ejected from a body due to impact or stress. In the context of impact mechanics it describes ejection of material from a target during impact by a projectile. In planetary physics, spallation describes meteoritic impacts on a planetary surface and the effects of stellar winds and cosmic rays on planetary atmospheres and surfaces. In the context of mining or geology, spallation can refer to pieces of rock breaking off a rock face due to the internal stresses in the rock; it commonly occurs on mine shaft walls. In the context of anthropology, spallation is a process used to make stone tools such as arrowheads by knapping. In nuclear physics, spallation is the process in which a heavy nucleus emits numerous nucleons as a result of being hit by a high-energy particle, thus greatly reducing its atomic weight. In industrial processes and bioprocessing the loss of tubing material due to the repeated flexing of the tubing within a peristaltic pump is termed spallation.

<span class="mw-page-title-main">Spallation Neutron Source</span> Accelerator-based neutron source in Oak Ridge, Tennessee, USA

The Spallation Neutron Source (SNS) is an accelerator-based neutron source facility in the U.S. that provides the most intense pulsed neutron beams in the world for scientific research and industrial development. Each year, this facility hosts hundreds of researchers from universities, national laboratories, and industry, who conduct basic and applied research and technology development using neutrons. SNS is part of Oak Ridge National Laboratory, which is managed by UT-Battelle for the United States Department of Energy (DOE). SNS is a DOE Office of Science user facility, and it is open to scientists and researchers from all over the world.

<span class="mw-page-title-main">Thomas Jefferson National Accelerator Facility</span> Particle accelerator laboratory in Newport News, Virginia, USA

Thomas Jefferson National Accelerator Facility (TJNAF), commonly called Jefferson Lab or JLab, is a US Department of Energy National Laboratory located in Newport News, Virginia.

<span class="mw-page-title-main">ISIS Neutron and Muon Source</span> English physics research facility

The ISIS Neutron and Muon Source is a pulsed neutron and muon source, established 1984 at the Rutherford Appleton Laboratory of the Science and Technology Facilities Council, on the Harwell Science and Innovation Campus in Oxfordshire, United Kingdom. It uses the techniques of muon spectroscopy and neutron scattering to probe the structure and dynamics of condensed matter on a microscopic scale ranging from the subatomic to the macromolecular.

<span class="mw-page-title-main">Mainz Microtron</span> Particle physics facility

The Mainz Microtron, abbreviated MAMI, is a microtron which provides a continuous wave, high intensity, polarized electron beam with an energy up to 1.6 GeV. MAMI is the core of an experimental facility for particle, nuclear and X-ray radiation physics at the Johannes Gutenberg University in Mainz (Germany). It is one of the largest campus-based accelerator facilities for basic research in Europe. The experiments at MAMI are performed by about 200 physicists of many countries organized in international collaborations.

<span class="mw-page-title-main">Proton Synchrotron Booster</span> CERN particle accelerator

The Proton Synchrotron Booster (PSB) is the first and smallest circular proton accelerator in the accelerator chain at the CERN injection complex, which also provides beams to the Large Hadron Collider. It contains four superimposed rings with a radius of 25 meters, which receive protons with an energy of 160 MeV from the linear accelerator Linac4 and accelerate them up to 2.0 GeV, ready to be injected into the Proton Synchrotron (PS). Before the PSB was built in 1972, Linac 1 injected directly into the Proton Synchrotron, but the increased injection energy provided by the booster allowed for more protons to be injected into the PS and a higher luminosity at the end of the accelerator chain.

<span class="mw-page-title-main">Institute of High Energy Physics</span> Chinese Government Agency

The Institute of High Energy Physics of the Chinese Academy of Sciences (IHEP) is the largest and most comprehensive fundamental research center of high-energy physics in China. It is located in Shijingshan District, Beijing and administered by the Chinese Academy of Sciences. The major research fields of IHEP are particle physics, astrophysics and astroparticle physics, accelerator physics and technologies, radiation technologies, and their applications.

<span class="mw-page-title-main">European XFEL</span>

The European X-Ray Free-Electron Laser Facility is an X-ray research laser facility commissioned during 2017. The first laser pulses were produced in May 2017 and the facility started user operation in September 2017. The international project with twelve participating countries; nine shareholders at the time of commissioning, later joined by three other partners, is located in the German federal states of Hamburg and Schleswig-Holstein. A free-electron laser generates high-intensity electromagnetic radiation by accelerating electrons to relativistic speeds and directing them through special magnetic structures. The European XFEL is constructed such that the electrons produce X-ray light in synchronisation, resulting in high-intensity X-ray pulses with the properties of laser light and at intensities much brighter than those produced by conventional synchrotron light sources.

<span class="mw-page-title-main">Particle accelerator</span> Research apparatus for particle physics

A particle accelerator is a machine that uses electromagnetic fields to propel charged particles to very high speeds and energies, and to contain them in well-defined beams.

<span class="mw-page-title-main">Neutron research facility</span>

A neutron research facility is most commonly a big laboratory operating a large-scale neutron source that provides thermal neutrons to a suite of research instruments. The neutron source usually is a research reactor or a spallation source. In some cases, a smaller facility will provide high energy neutrons using existing neutron generator technologies.

<span class="mw-page-title-main">Los Alamos Neutron Science Center</span> One of the worlds most powerful linear accelerators

The Los Alamos Neutron Science Center (LANSCE), formerly known as the Los Alamos Meson Physics Facility (LAMPF), is one of the world's most powerful linear accelerators. It is located in Los Alamos National Laboratory in New Mexico in Technical Area 53. It was the most powerful linear accelerator in the world when it was opened in June 1972. The technology used in the accelerator was developed under the direction of nuclear physicist Louis Rosen. The facility is capable of accelerating protons up to 800 MeV. Multiple beamlines allow for a variety of experiments to be run at once, and the facility is used for many types of research in materials testing and neutron science. It is also used for medical radioisotope production.

A Fixed-Field alternating gradient Accelerator is a circular particle accelerator concept that can be characterized by its time-independent magnetic fields and the use of alternating gradient strong focusing.

<span class="mw-page-title-main">Neutron Time Of Flight</span> Facility at CERN with a neutron source

The Neutron Time Of Flight (n_TOF) facility is a neutron spectrometer at CERN, with the aim of studying neutron-nucleus interactions over a range of kinetic energies, using the time of flight method. The research conducted at the facility has applications in nuclear technology and nuclear astrophysics. The facility has been in operation at CERN since 2001, following a proposal from the former Director General, Carlo Rubbia, for a high-intensity neutron source.

<span class="mw-page-title-main">China Spallation Neutron Source</span>

The China Spallation Neutron Source is an accelerator-based neutron source, operated by the Institute of High Energy Physics, under construction at Dongguan in Guangdong province - the first major scientific facility in south China. The project was approved by Chinese central government in 2005. Construction began 20 October 2011, with commissioning planned for 2016, and operation in 2018.

<span class="mw-page-title-main">MYRRHA</span> Design project of a nuclear reactor coupled to a proton accelerator

The MYRRHA is a design project of a nuclear reactor coupled to a proton accelerator. This makes it an accelerator-driven system (ADS). MYRRHA will be a lead-bismuth cooled fast reactor with two possible configurations: sub-critical or critical.

References

  1. "European Spallation Source - Homepage". ESS. 2014. Archived from the original on 17 May 2014. Retrieved 5 August 2014.
  2. European Spallation Source. "Construction Site Weekly Updates". europeanspallationsource.se. Retrieved 17 July 2015.
  3. European Spallation Source. "DMSC". europeanspallationsource.se. Retrieved 17 July 2015.
  4. "Data Management & Software Centre - ESS". europeanspallationsource.se. Retrieved 2023-09-16.
  5. "ESS - Introduction". European Spalliation Source. 2013. Retrieved 11 March 2014.
  6. 1 2 European Spallation Source (April 2015). Activity Report 2015 (PDF). Lund: ESS. Archived from the original (PDF) on 21 July 2015. Retrieved 17 July 2015.
  7. European Spallation Source. "Unique Capabilities of ESS". europeanspallationsource.se. Retrieved 17 July 2015.
  8. Mezei, Ferenc (1996). "The raison d'être of long pulse spallation sources". Journal of Neutron Research. 6 (1–3): 3–32. doi:10.1080/10238169708200095.
  9. Mezei, Ferenc (1997). "Long pulse spallation sources". Physica B: Condensed Matter. 234–236: 1227–1232. Bibcode:1997PhyB..234.1227M. doi:10.1016/S0921-4526(97)00271-8.
  10. "EU Finance for Innovators factsheet" (PDF). European Investment Bank. Retrieved February 4, 2024.
  11. Bank, European Investment (2022-01-27). EIB Activity Report 2021. European Investment Bank. ISBN   978-92-861-5108-8.
  12. "InnovFin EU Finance for innovators". EIB.org. Retrieved 2022-05-12.
  13. 1 2 3 4 5 "The ESS Story". European Spallation Source. 2013. Retrieved 11 March 2014.
  14. A European Roadmap for Developing Accelerator Driven Systems (ADS) for Nuclear Waste Incineration pretty layout with bad pictures ugly layout with good pictures Archived 2015-07-22 at the Wayback Machine
  15. "The European Spallation Source | ESS". Europeanspallationsource.se. Retrieved 11 March 2014.
  16. European Spallation Source ERIC (20 August 2015). "European Commission Establishes ESS as a European Research Infrastructure Consortium". European Spallation Source. ESS. Retrieved 22 January 2016.
  17. FAQ Funding and Costs - ESS
  18. 1 2 "ESS Magyarország". Esshungary.eu. Archived from the original on 2014-03-11. Retrieved 11 March 2014.
  19. "Clear support for ESS in Sweden: A great step for European science" (Press release). Ess-scandinavia.eu. May 29, 2009. Archived from the original on 7 June 2009.
  20. "Swedish-Spanish agreement on ESS in Lund the beginning of a new collaborative phase" (Press release). Ess-scandinavia.eu. 10 June 2009. Archived from the original on 21 December 2009.
  21. "Hungary will become the 14th Partner in the European Spallation Source research center. All three of the former site contenders now join forces to build the ESS in Sweden". Archived from the original on 21 December 2009.
  22. Garoby, Roland; et al. (2018). "The European Spallation Source Design". Physica Scripta. 93 (1): 014001. Bibcode:2018PhyS...93a4001G. doi: 10.1088/1402-4896/aa9bff .
  23. Moormann, Rainer; Bongardt, Klaus; Chiriki, Suresh (28 March 2009). "Safety aspects of high power targets for European spallation sources" (PDF). Forschungszentrum Juelich . Retrieved 1 April 2009.
  24. Moormann, Rainer; Reiche-Begemann, Sigrid (28 March 2009). "Safety and Licensing of the European Spallation Source (ESS)" (PDF). Forschungszentrum Juelich. Archived from the original (PDF) on 18 July 2011. Retrieved 1 April 2009.
  25. Physics World. "Sights firmly set on target". Physics World. The Institute of Physics. Archived from the original on 6 April 2017. Retrieved 22 January 2016.
  26. "Our unique Sustainable Energy Concept". Archived from the original on 26 January 2012.
  27. Videnskab DK (22 July 2015). "Godt nyt for klimaet: Dansk-svensk forskningsanlæg vil være CO2-neutralt". Videnskab DK. Retrieved 22 January 2016.
  28. European Spallation Source ERIC. "Innovation and Engineering Set ESS on Path to Sustainability". europeanspallationsource.se. ESS. Retrieved 22 January 2016.
  29. Parker, T. "ESS Energy Design Report 2013" (PDF). europeanspallationsource.se. ESS. Archived from the original (PDF) on 27 January 2016. Retrieved 22 January 2016.
  30. 1 2 Peggs, Steven (2013). "The Reference Instrument Suite". ESS Technical Design Report (PDF). European Spallation Source. pp. 53–55. ISBN   978-91-980173-2-8.
  31. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Andersen, K.H.; et al. (21 March 2020). "The instrument suite of the European Spallation Source". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 957: 163402. Bibcode:2020NIMPA.95763402A. doi: 10.1016/j.nima.2020.163402 . hdl: 10261/218615 . S2CID   212411827.
  32. https://essnusb.eu/.{{cite web}}: Missing or empty |title= (help)
  33. Alekou, A.; Baussan, E.; Kraljevic, N. Blaskovic; Blennow, M.; Bogomilov, M.; Bouquerel, E.; Burgman, A.; Carlile, C. J.; Cederkall, J.; Christiansen, P.; Collins, M.; Morales, E. Cristaldo; D'Alessi, L.; Danared, H.; de André, J. P. A. M. (December 2021). "Updated physics performance of the ESSnuSB experiment". The European Physical Journal C. 81 (12): 1130. arXiv: 2107.07585 . Bibcode:2021EPJC...81.1130A. doi:10.1140/epjc/s10052-021-09845-8. ISSN   1434-6044. S2CID   236033945.

Further reading

55°44′06″N13°15′05″E / 55.7350°N 13.2514°E / 55.7350; 13.2514