F-1 (satellite)

Last updated

F-1
F-1 CubeSat Flight Model.jpg
Flight Model of F-1 satellite
Mission type Technology demonstration
Operator FPT University/Uppsala University
COSPAR ID 2012-038E (1998-067CR) [1]
SATCAT no. 38855
Mission durationFailed to contact ground
100 days (planned)
Spacecraft properties
Spacecraft type CubeSat
Manufacturer FPT University
Launch mass1 kg (2.2 lb)
Dimensions10 cm x 10 cm x 10 cm (1U)
Start of mission
Launch date21 July 2012, 02:06:18 UTC [2]
Rocket H-IIB F3
Launch site Tanegashima, Yoshinobu LC-Y2
Contractor Mitsubishi Heavy Industries
Deployed from ISS Kibō
Delivered by Kounotori 3
Deployment date4 October 2012,
15:44:15.297 UTC
Entered serviceFailed to contact ground
End of mission
Decay date9 May 2013 [3]
Orbital parameters
Reference system Geocentric orbit
Regime Low Earth orbit
Inclination 51.65°
F-1 mission patch 1 resize.jpg
F-1 mission patch  

F-1 is a CubeSat built by FSpace laboratory at FPT University, in Hanoi, Vietnam, in partnership with Angstrom Space Technology Center (ASTC), Uppsala University, Sweden and Nanoracks LLC, United States. Its mission is to train young engineers and students about aerospace engineering and evaluate an advanced three-axis magnetometer, Spin-Dependent Tunneling Magnetometer (SDTM) designed in Sweden by ASTC. [4]

Contents

F-1 was launched on 21 July 2012 and delivered to the International Space Station (ISS) aboard Kounotori 3 (HTV-3) along with the RAIKO, WE WISH, Niwaka and TechEdSat-1 cubesats. Then, on 4 October 2012, it was deployed into orbit from the ISS using the JEM-Small Satellite Orbital Deployer (J-SSOD) which was attached to the Kibō module's robotic arm. [5] [6]

As of 2 November 2012, F-1 failed to confirm communication after the orbital deployment. [7]

CubeSats deployed to orbit from the International Space Station on 4 October 2012 (from left: TechEdSat-1, F-1 and Niwaka). CubeSats launched by ISS Expedition 33.jpg
CubeSats deployed to orbit from the International Space Station on 4 October 2012 (from left: TechEdSat-1, F-1 and Niwaka).

Hardware

Specifications

F-1 and companion CubeSats at Tsukuba Space Center, June 2012 F-1 and other CubeSats at TKSC.jpg
F-1 and companion CubeSats at Tsukuba Space Center, June 2012

Communication subsystem and Packet format

Memorial pins on F-1 resize Memorial pins on F-1 resize.JPG
Memorial pins on F-1 resize

1. Backup UHF channel (only operational in daylight):

Pulse-Width-Modulation Morse code telemetry beacon

No1DataDescriptionSize (bits)Size (chars)
1F-1's callsign"XV1VN"5
2OBC1 reset countNumber of OBC1's reset since the beginning8
3Temperature 1°C (temperature inside F-1, OBC board)85
4Temperature 2°C (temperature outside F-1, Y- side)8
5Checksum bit0 if summary of items #2 to #4 is even, 1 if it is odd1
Total10

2. Main VHF channel (operational during night time but may be turned on in daylight later)

F-1's KISS packet format

NoDataDescriptionSize (bit)
1Date timeDate: dd/mm/y: 5/4/3=12 bits
Time: hh/mm/ss: 5/6/6=17 bits
29
2Battery voltageBattery voltage multiplied by 100 (divide by 100 to get actual value)11
3Solar cells voltageSolar cells voltage multiplied by 10 (divide by 10 to get actual value)8
4Temperature 1°C (side 1, Y+)8
5Temperature 2°C (side 2, Y-)8
6Temperature 3°C (side 3, X-)8
7Temperature 4°C (side 4, Z+)8
8Temperature 5°C (side 5, Z-)8
9Temperature 6°C (side 6, X+)8
10Temperature 7°C (inside side 5, Z-)8
11Temperature 8°C (inside, under VX-3R1)8
Total112 bits = 14 bytes

Note:

Related Research Articles

<span class="mw-page-title-main">CubeSat</span> Miniature satellite in 10 cm cube modules

A CubeSat is a class of small satellite with a form factor of 10 cm (3.9 in) cubes. CubeSats have a mass of no more than 2 kg (4.4 lb) per unit, and often use commercial off-the-shelf (COTS) components for their electronics and structure. CubeSats are deployed into orbit from the International Space Station, or launched as secondary payloads on a launch vehicle. As of December 2023, more than 2,300 CubeSats have been launched.

RAIKO is a Japanese satellite which was built and operated by Tohoku and Wakayama Universities. A two-unit CubeSat, RAIKO was deployed from the International Space Station (ISS) on 4 October 2012, having been launched on 21 July 2012.

MaSat-1 is the first indigenous Hungarian satellite, developed and built by students at the Technical University of Budapest. The 1U CubeSat-type satellite was launched into low Earth orbit on 13 February 2012. The satellite provided telemetric data as well as VGA resolution color images at the 70 cm amateur radio wavelength received at the tracking center at Budapest. The center was tested on 31 March 2009 with the help of Charles Simonyi on board the International Space Station. With the successful launch of MaSat-1, Hungary became the 47th nation to orbit a satellite. Between 9 and 10 January 2015, the satellite reentered into the atmosphere.

ITUpSAT1, short for Istanbul Technical University picoSatellite-1, is a single CubeSat built by the Faculty of Aeronautics and Astronautics at the Istanbul Technical University. It was launched on 23 September 2009 atop a PSLV-C14 satellite launch vehicle from Satish Dhawan Space Centre, Sriharikota, Andhra Pradesh in India, and became the first Turkish university satellite to orbit the Earth. It was expected to have a minimum of six-month life term, but it is still functioning for over two years. It is a picosatellite with side lengths of 10 centimetres (3.9 in) and a mass of 0.990 kilograms (2.18 lb).

Technology Education Satellite (TechEdSat) is a successful nano-sat flight series conducted from the NASA Ames Research Center in collaboration with numerous universities. While one of the principal aims has been to introduce young professionals and university students to the practical realm of developing space flight hardware, considerable innovations have been introduced. In addition, this evolving flight platform has tested concepts for Low Earth Orbit (LEO) sample return, as well as planetary nano-sat class mission concepts.

<span class="mw-page-title-main">WE WISH</span> Japanese commercial CubeSat

WE WISH was a small commercial CubeSat which was deployed from the International Space Station (ISS) in October 2012 and which deorbited in March 2013. It was built by the Japanese technology company Meisei Electric and the Meisei Amateur Radio Club, and could transmit pictures taken by a small infrared camera via radio at 437.515 MHz. WE WISH travelled to orbit aboard Kounotori 3 (HTV-3) on 21 July 2012, along with other CubeSats including RAIKO, FITSAT-1, F-1, and TechEdSat-1.

<span class="mw-page-title-main">Nanoracks CubeSat Deployer</span> Device to deploy CubeSats into orbit from the International Space Station

The Nanoracks CubeSat Deployer (NRCSD) is a device to deploy CubeSats into orbit from the International Space Station (ISS).

<span class="mw-page-title-main">Kounotori 7</span> 2018 Japanese resupply spaceflight to the ISS

Kounotori 7 (こうのとり7号機), also known as HTV-7, was the seventh flight of the H-II Transfer Vehicle (HTV), an uncrewed cargo spacecraft launched on 22 September 2018 to resupply the International Space Station.

TRICOM-1R, also known as Tasuki, was a Japanese nanosatellite that was launched during the SS-520-5 sounding rocket test launch on 3 February 2018, with a mission to conduct store and forward data relay and Earth observation using a set of cameras.

<span class="mw-page-title-main">PicoDragon</span> Vietnamese CubeSat

PicoDragon is a small satellite that followed the 1U type of CubeSat program built by the Vietnam National Satellite Center (VNSC) which belongs to VAST and operated in space for 3 months.

<span class="mw-page-title-main">Explorer 45</span> NASA satellite of the Explorer program

Explorer 45 was a NASA satellite launched as part of Explorer program. Explorer 45 was the only one to be released from the program Small Scientific Satellite.

The Damping and Vibrations Experiment (DAVE), also known as CP-7, is a technology demonstration nanosatellite developed by the PolySat laboratory at California Polytechnic State University, San Luis Obispo, in collaboration with Northrop Grumman. The spacecraft adheres to the 1U CubeSat standard and is currently in a 93° inclination orbit. DAVE will study the vibration of metal beams damped with tungsten particles in a micro-gravity environment. The test elements are driven by a piezoelectric actuator, and vibration data is collected via an accelerometer at the tip of each beam. DAVE was launched into a high-inclination orbit as a secondary payload on the final flight of the Delta II launch vehicle as part of the ELaNa-18 ride-share mission with NASA's ICESat-2 primary payload. The launch occurred out of Vandenberg Air Force Base, California on September 15 at 6:02 AM local time. DAVE was deployed alongside three other CubeSat spacecraft: University of Central Florida's SurfSat, and two ELFIN spacecraft from University of California, Los Angeles.

AQT-D was a nanosatellite project of the University of Tokyo (UT) Space Propulsion Laboratory with the purpose of testing water-fueled propulsion. The satellite was a CubeSat of 3U size; 1U was occupied by the propulsion system, while the remaining 2U was for the spacecraft bus. AQT-D was carried to space inside the pressurized section of Kounotori 8, a Japanese resupply vehicle for the International Space Station (ISS). Kounotori 8 was launched on 24 September 2019. After arriving at the ISS, AQT-D was deployed to space on 20 November 2019 using the JEMRMS robotic arm at the space station's Kibō laboratory module.

RSP-01, nicknamed Selfie-sh was a nanosatellite developed by Ryman Sat Project. RSP-01 launched from Wallops Flight Facility on board a Cygnus spacecraft on 20 February 2021.

STARS-EC was a nanosatellite developed by Shizuoka University, for the purpose of demonstrating space elevator tether technology. It was a 3U-size CubeSat, and could split into three separate satellites, connected via tethers. STARS-EC was launched on 20 February 2021, and was deployed from the International Space Station (ISS). The deployment service of STARS-EC was provided by Mitsui Bussan Aerospace.

<span class="mw-page-title-main">SpaceX CRS-26</span> 2022 American resupply spaceflight to the ISS

SpaceX CRS-26, also known as SpX-26, was a Commercial Resupply Service mission to the International Space Station (ISS) launched on 26 November 2022. The mission was contracted by NASA and flown by SpaceX using a Cargo Dragon. This was the sixth flight for SpaceX under NASA's CRS Phase 2 contract awarded in January 2016.

KOSEN-1 is a technology demonstration satellite that will test the deployment of an antenna for observing radio waves emitted from the planet Jupiter. It is a 2U CubeSat, and carries a 7 m (23 ft) antenna. The CubeSat was jointly developed by the National Institute of Technologies in Japan. National Institute of Technologies is known as 'kosen' in Japanese. KOSEN-1 was launched on 9 November 2021 by an Epsilon launch vehicle, as part of the Innovative Satellite Technology Demonstration-2 mission.

WARP-01, nicknamed Nichirin, was a 1U-sized CubeSat developed and operated by Warpspace, a newspace company based in Tsukuba, Japan. It was launched on 20 February 2021 on board a Cygnus cargo spacecraft, and deployed from the International Space Station (ISS) on 14 March 2021. WARP-01 was used for technology validation and monitoring the radio wave and radiation environment in space.

KITSUNE was a nanosatellite developed by the HAK consortium, which consists of Haradaseiki Kogyo, Addnics Corporation, and Kyushu Institute of Technology (Kyutech). The spacecraft was a 6U CubeSat, and carried a high-resolution camera for Earth observation. KITSUNE was carried to the International Space Station (ISS) on board Cygnus NG-17, and was deployed from the ISS's Kibō Module on 24 March 2022 12:10 UTC. The deployment service of KITSUNE was provided by Mitsui Bussan Aerospace.

References

  1. "Display: F-1 2012-038E". NASA. 14 May 2020. Retrieved 13 January 2021.PD-icon.svg This article incorporates text from this source, which is in the public domain.
  2. Bergin, Chris (20 July 2012). "Japanese H-IIB launches HTV-3 to the International Space Station". NASASpaceFlight.com. Retrieved 13 January 2021.
  3. "Trajectory: F-1 2012-038E". NASA. 14 May 2020. Retrieved 13 January 2021.PD-icon.svg This article incorporates text from this source, which is in the public domain.
  4. Gunter, Dirk Krebs (28 January 2020). "F-1". Gunter's Space Page. Retrieved 13 January 2021.
  5. 大塚実 (25 January 2012). "JAXA、宇宙ステーションから超小型衛星を放出できる装置をプレス公開" (in Japanese). mynavi.jp. Retrieved 13 January 2021.
  6. 「きぼう」日本実験棟からの小型衛星放出ミッション (in Japanese). JAXA. 5 October 2012. Archived from the original on 13 November 2012. Retrieved 13 January 2021.
  7. "Attempt to recover the F-1 Amateur Radio CubeSat". 3 November 2012. Archived from the original on 24 September 2015. Retrieved 22 December 2012.