Gulfstream American GA-7 Cougar

Last updated

GA-7 Cougar & TB 320 Tangara
GulfstreamAmericanGA-7Cougar03.jpg
General information
TypePersonal and trainer aircraft
Manufacturer Gulfstream American Aviation
Number built115
History
Manufactured1978-1979
Introduction dateFebruary 1978
First flightDecember 20, 1974 [1]
A GA-7 Cougar on the ramp at Les Cedres Quebec, May 2005 GulfstreamAmericanGA-7Cougar01.jpg
A GA-7 Cougar on the ramp at Les Cedres Quebec, May 2005

The Gulfstream American GA-7 Cougar is an American all-metal, 4-seat, twin-engined light aircraft. The Cougar was a twin-engine development of the Gulfstream American AA-5B Tiger and traces its lineage to the AA-1 Yankee Clipper and the Bede BD-1.

Contents

Development

As a development of the company's single-engined designs, Grumman American developed a twin-engined version, designated the GA-7 which it named the Cougar, in keeping with the existing Lynx, Cheetah and Tiger names for aircraft in the company's line. The prototype Cougar with two 160 hp (119 kW) Lycoming O-320 engines first flew on the 29 December 1974. The prototype had a sliding canopy but this was soon changed to a starboard side door on the production aircraft. With other rework required the production prototype did not fly until 14 January 1977. [2]

Before production started the company was taken over on 1 September 1978 by American Jet Industries, who changed the company name to Gulfstream American. [1] Production of the Cougar ran for only two model years, 1978 and 1979, before production was halted. Just 115 Cougars were delivered. [3] [4]

In 1995 the type certificate for the GA-7 was sold to SOCATA of France who intended to produce the aircraft as the TB 320 Tangara for the training market. [5] It was also to develop a variant with two Lycoming O-360-A1G6 engines of 180 hp (134 kW) each and a re-designed cockpit, it was designated the TB 360. The first Tangara was a modified Cougar, had 160 hp (119 kW) engines and first flew in mid-1996. The complete Tangara prototype was also a converted Cougar and had the 180 hp (134 kW) engines. It first flew in February 1997. After delays in getting the type certified SOCATA announced at the end of 1999 that it had delayed indefinitely plans to certify the type. [6]

On 23 May 2019 the type certificate was transferred by SOCATA to the Cougar Aircraft Corporation in the United States. [7]

Design

The Cougar is a twin-engined low-wing cantilever monoplane using a honeycomb and bonded metal construction that is the hallmark of the line since the BD-1. The prototype's single spar wing was upgraded to a double-spar configuration and this allowed a wet wing.

The Cougar is powered by a pair of wing-mounted Lycoming O-320-D1D engines of 160 hp (119 kW). It carries four people at maximum cruise speed of 160 kn (296 km/h) and a typical cruise speed of 140 kn (259 km/h). It was certified under US FAR Part 23 on 22 September 1977. [3]

Variants

GA7 Cougar
160 hp (119 kW) version designed by Grumman American and produced by Gulfstream American 1978-79. 115 built. [1]
TB 320 Tangara
Restarted production of the 160 hp (119 kW) version by SOCATA, two modified Cougars were converted to Tangara prototypes 1996-97, production was never started.
TB 360 Tangara
Re-designed variant from SOCATA with 180 hp (134 kW) O-360 engines, one prototype, a modified Cougar, was first flown in 1997, never entered production.

Specifications (Gulfstream American GA-7 Cougar)

Data from FAA Type Certificate, [3] The Incomplete Guide to Airfoil Usage, [8] Pilot's Operating Handbook [9] and Pilot Friend [10]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Rutan Defiant</span>

The Rutan Model 40 Defiant is a four-seat, twin-engine homebuilt aircraft with the engines in a push-pull configuration. It was designed by aerospace engineer Burt Rutan for the Rutan Aircraft Factory.

<span class="mw-page-title-main">Piper PA-30 Twin Comanche</span> American twin-engined cabin monoplane built 1962–1972

The Piper PA-30 Twin Comanche is an American twin-engined cabin monoplane designed and built by Piper Aircraft. It was a twin-engined development of the PA-24 Comanche single-engined aircraft. A variant with counter-rotating propellers was designated the Piper PA-39 Twin Comanche C/R.

<span class="mw-page-title-main">Grumman American AA-1</span> American light aircraft

The Grumman American AA-1 series is a family of light, two-seat aircraft. The family includes the original American Aviation AA-1 Yankee and AA-1A Trainer along with the TR2. The TR2 has a cruise prop and the trainer has a climb prop. Typically the TR2 came with more navigation instruments and of course was better for cross country flying because of her speed and lower fuel consumption for equal distances The Grumman American AA-1B Trainer and TR-2, plus the Gulfstream American AA-1C Lynx and T-Cat.

The Bede BD-1 was a two-seat, single-engine, low-wing monoplane, the first design of American aeronautical engineer Jim Bede. The BD-1 was designed in 1960 as a kit-built aircraft intended for home assembly by amateur builders. Design goals included a kit price of $US 2500, including a rebuilt 100 hp (75 kW) engine and a cruise speed of 130 knots (240 km/h). The prototype N624BD first flew in 1962.

<span class="mw-page-title-main">Grumman American AA-5</span> Family of light single engine aircraft

The Grumman American AA-5 series is a family of American all-metal, four-seat, light aircraft used for touring and training. The line includes the original American Aviation AA-5 Traveler, the Grumman American AA-5 Traveler, AA-5A Cheetah, and AA-5B Tiger, the Gulfstream American AA-5A Cheetah and AA-5B Tiger, the American General AG-5B Tiger, and the Tiger Aircraft AG-5B Tiger.

<span class="mw-page-title-main">Alpha 2000</span> Type of aircraft

The Alpha Aviation Alpha 2000 is a two-seat, all-metal training and general aviation aircraft, designed by Chris Heintz and built in Hamilton, New Zealand. It continues the successful French Apex Aircraft's Robin R2000 series acquired upon Apex's purchase of the Avions Robin company.

<span class="mw-page-title-main">Socata TB 30 Epsilon</span> Type of aircraft

The Socata TB 30 Epsilon is a light military trainer aircraft produced by SOCATA. It is a tandem two-seater with a metal airframe. The first prototype flew on 22 December 1979.

<span class="mw-page-title-main">SOCATA Rallye family</span> French light aircraft

The SOCATA Rallye is a light aircraft that was manufactured by French aviation company SOCATA. It was originally developed during the 1950s by French aircraft manufacturer Morane-Saulnier as the MS.880.

The Aerotec A-132 Tangará was a Brazilian military trainer aircraft developed from the A-122 Uirapuru of the 1960s.

<span class="mw-page-title-main">PZL-105 Flaming</span> Type of aircraft

The PZL-105 Flaming (flamingo) is a Polish short-takeoff-and-landing (STOL) utility aircraft designed by PZL "Warszawa-Okęcie". It remained a prototype.

<span class="mw-page-title-main">Wassmer WA-51 Pacific</span> Type of aircraft

The Wassmer WA-51 Pacific is a French four-seat cabin monoplane designed and built by Société Wassmer. Different-powered variants include the Wassmer WA-52 Europa and the Wassmer WA-54 Atlantic. It was the world's first composite material-built aircraft.

<span class="mw-page-title-main">Malmö MFI-10 Vipan</span> Type of aircraft

The Malmö MFI-10 Vipan was a four-seat light utility monoplane designed and built in Sweden by Malmö Flygindustri. Only three aircraft were built and the type did not enter quantity production.

<span class="mw-page-title-main">SOCATA Horizon</span> Type of aircraft

The GY-80 Horizon is a French four-seat touring monoplane of the 1960s designed by Yves Gardan and built under licence, first by Sud Aviation, and later by that company's SOCATA subsidiary.

<span class="mw-page-title-main">Piel Diamant</span> 1960s French light aircraft

The Piel CP.60 Diamant is a single-engine light aircraft designed in France in the 1960s and marketed for home building.

<span class="mw-page-title-main">Robin R3000</span> French single-engined light aircraft

The Robin R 3000 is a French single-engined light aircraft designed and built by Avions Robin, which entered production in the 1980s.

<span class="mw-page-title-main">SOCATA TB family</span> General aviation aircraft family by Socata

The Socata TB is a series of light single-engine piston aircraft developed and manufactured by French aircraft company SOCATA. The letters TB within the designation stand for Tarbes, the French city where the aircraft series is manufactured. The TB series planes have come to be known as the "Caribbean Planes" due to the island naming convention adopted for the various models, though they are not often seen flown in that region.

<span class="mw-page-title-main">Trident TR-1 Trigull</span> Canadian amphibious light aircraft

The Trident TR-1 Trigull is a Canadian amphibious aircraft that was developed by Trident Aircraft of Burnaby, British Columbia and later Sidney, British Columbia. The aircraft was intended to be supplied as a complete ready-to-fly certified aircraft. The company encountered financial difficulties and only three prototypes were ever built.

<span class="mw-page-title-main">Uetz Pelikan</span> Type of aircraft

The Uetz Pelikan is a Swiss four-seat cabin monoplane designed for amateur construction by Walter Uetz.

The Eaves Cougar 1 is an American homebuilt aircraft that was designed by Leonard R. Eaves of Oklahoma City, Oklahoma and made available in the form of plans for amateur construction.

<span class="mw-page-title-main">Lancair 235</span> American light kit airplane

The Lancair 200 and Lancair 235 are a family of American amateur-built aircraft that were designed by Lance Neibauer and produced by his company, Lancair of Redmond, Oregon. The Lancair 200 was initially called the Lancer 200, but the name was changed due to a naming conflict. It was first shown at AirVenture in Oshkosh, Wisconsin in July 1985. Now out of production, when it was available the aircraft was supplied as a kit, for amateur construction.

References

  1. 1 2 3 Simpson 1991, p. 25
  2. Wood, Derek: Jane's World Aircraft Recognition Handbook, page 233. Jane's Publishing Company, 1982. ISBN   0-7106-0202-2
  3. 1 2 3 Federal Aviation Administration (March 2007). "Type Certificate Data Sheet No. A17SO" . Retrieved July 2, 2008.
  4. Marsh, Alton K (August 1, 1996). "Return of the Night Fighter?: From predator to exotic bird". Aircraft Owners and Pilots Association.
  5. "Socata to manufacture Cougars". Flight International : 24. June 27, 1995.
  6. Legros, Francois (January 3, 2000). "Tangara delayed 'indefinitely'". Flight International .
  7. European Aviation Safety Agency Type Certificate Cougar Aircraft Corporation GA7 EASA.IM.A.381 dated 15 August 2019
  8. Lednicer, David (October 2007). "The Incomplete Guide to Airfoil Usage". Archived from the original on May 15, 2008. Retrieved December 30, 2009.
  9. Gulfstream Aerospace (October 1978). "Pilot's Operating Handbook" (PDF). Retrieved December 31, 2009.
  10. Pilot Friend (n.d.). "Grumman GA-7 Cougar performance and specifications" . Retrieved December 30, 2009.{{cite web}}: CS1 maint: year (link)