AA-5/AG-5 series | |
---|---|
General information | |
Type | Four-seat cabin monoplane |
National origin | United States |
Manufacturer | American Aviation Grumman American Gulfstream American American General Aviation Corporation Tiger Aircraft |
Number built | 3,282 |
History | |
Manufactured | 1971–2006 |
Introduction date | December 1971[ citation needed ] |
First flight | August 21, 1970[ citation needed ] |
The Grumman American AA-5 series is a family of American all-metal, four-seat, light aircraft used for touring and training. The line includes the original American Aviation AA-5 Traveler, the Grumman American AA-5 Traveler, AA-5A Cheetah, and AA-5B Tiger, the Gulfstream American AA-5A Cheetah and AA-5B Tiger, the American General AG-5B Tiger, and the Tiger Aircraft AG-5B Tiger.
Following American Aviation's success with the AA-1 Yankee Clipper two-seat light aircraft in 1969, the company decided to produce a four-seat aircraft. They started with a new "clean-sheet" design that was designated the American Aviation AA-2 Patriot. The AA-2 design did not meet its performance goals during test-flying and only one was ever built.
Still needing a four-seat aircraft to fill its product line, the company simply enlarged the external and cabin dimensions of the AA-1 Yankee to create the four-seater. This decision capitalized on the marketplace identification of the Yankee and its derivative the AA-1A Trainer and also resulted in 2/3 parts commonality between the designs, saving development time and production costs.
The new four-place aircraft, named the American Aviation AA-5 Traveler, was powered by a Lycoming O-320-E2G engine of 150 hp (110 kW). It would carry four people at 121 knots (224 km/h) cruise speed and was certified under US FAR Part 23. [1]
Production of the Traveler had just started in 1971 when American Aviation was sold to Grumman and became the Grumman American division. Grumman continued production of the Traveler. 834 Travelers had been produced when production of this model ceased in 1975.
A redesign of the AA-5 was undertaken in 1974, with the resulting 1975 model Traveler featuring an aerodynamic cleanup of the engine cowling and main landing gear fairings. The tail section remained unchanged. As a result of these changes the 1975 Traveler had a cruise speed of 127 knots (235 km/h). The Traveler was superseded in production the following year by the further refined AA-5A Cheetah.
Grumman's engineers felt that the AA-5 design had more speed potential than the original Traveler, even with its 1975 improvements, and so embarked on an aerodynamic cleanup and redesign. Changes were made to the engine cowling and baffling to reduce cooling drag, the exhaust system was redesigned, the main landing gear fairings were further improved, the ventral fin was eliminated, and the horizontal tail was enlarged to allow a larger center of gravity range. Fuel capacity was increased from the Traveler's 37 US gallons to 52 gallons, with optional long range tanks, thus increasing its range.
The new variant was named the AA-5A Cheetah and was introduced as a 1976 model in late 1975. In keeping with its namesake it was six knots (seven mph) faster than the Traveler with the same 150 hp (110 kW) Lycoming O-320-E2G powerplant. Because the Cheetah looked very much like the Traveler externally, Grumman's marketing department created a "leaping cheetah" emblem to differentiate it from the earlier AA-5.
Grumman sold its light aircraft division to Gulfstream Aerospace in 1978 and the division was renamed Gulfstream American. Gulfstream continued production of the AA-5A until 1979. A total of 900 Cheetahs were produced.
The final variant of the AA-5 line was the AA-5B Tiger. The Tiger was designed by Grumman engineers and was first produced in late 1974 as the 1975 model.
The Tiger was the outcome of the same redesign work on the AA-5 Traveler that resulted in the 150 hp (110 kW) Cheetah and it was originally little more than the same aircraft with a Lycoming O-360-A4K 180 hp (130 kW) engine, resulting in a 139-knot (257 km/h) cruise speed. Gross weight was increased from the AA-5/AA-5A's 2,200 lb (1,000 kg) to 2,400 lb (1,100 kg) on the Tiger. Externally the Tiger looked much like the AA-5 Traveler and AA-5A Cheetah so once again Grumman's marketing department came up with a distinctive decal package to differentiate the design – this time a "galloping tiger".
While the earlier AA-1s and AA-5s did not change much from year to year the AA-5B Tiger underwent almost continual improvement. As with the AA-5A, the AA-5B was continued in production by Gulfstream when they purchased Grumman's American division. Gulfstream ceased production of all piston-engined aircraft in 1979 and the highly successful Tiger design went out of production after 1323 aircraft had been delivered.
For eleven years the design was not produced and then in the late 1980s a new company was formed to produce the Tiger. American General Aviation Corporation carried out further design improvements including introducing a new split nose cowling (engine cover) that could be removed without removing the propeller, a new instrument panel, improved exterior lighting, a new fuel quantity indication system, a 28 volt electrical system replacing the older 14 volt system, a new-style throttle quadrant, and improvements to the heat and ventilation systems. Aerodynamic improvements raised the optimal altitude cruise speed from 139 knots (257 km/h) true airspeed to 143 knots (265 km/h) TAS. The redesigned aircraft was put into production under an amended type certificate as the American General AG-5B Tiger. The new company had considered producing AA-1s and AA-5A Cheetahs, but those plans were never fulfilled before it closed its doors in 1993. American General produced Tigers for model years 1990–93 and delivered 181 aircraft in that time.
The design has a strong following among pilots and aircraft owners and so, in 1999, a new company was formed to put the Tiger back into production. Tiger Aircraft started production of the AG-5B Tiger in 2001 at their plant in Martinsburg, West Virginia. Tiger Aircraft did not produce any other models of the AA-1 or AA-5 family, although they owned the type certificates for the complete line of aircraft. Between 2001 and 2006 Tiger Aircraft produced 51 AG-5Bs. By the middle of 2006 Tiger Aircraft was experiencing financial problems and production of AG-5Bs had been halted and production workers laid off. [2] [3] Tiger Aircraft filed for bankruptcy in January 2007. [4]
On August 2, 2007, the Federal Bankruptcy Court approved the sale of Tiger Aircraft assets to True Flight Holdings LLC. True Flight has indicated its intention to produce parts and also return the AG-5B Tiger to production as soon as possible at a planned 60,000-square-foot (5,600 m2) facility on a 13-acre (53,000 m2) lot at the Valdosta, Georgia, Airport, but as of 2021 had not produced any complete aircraft. [5] [6] [7] [8]
All told, 3,289 AA-5s and AG-5s were produced by the five manufacturers between 1971 and 2005.
All models of the AA-5 have four seats under a sliding canopy, which can be partly opened in flight for ventilation. Entry for all four occupants is from the wing root over the canopy sill. Compared to competitive aircraft of the same era the AA-5s are noted for their light and pleasant handling characteristics as well as high cruising speed for the installed power.
As derivatives of the original AA-1 Yankee, the AA-5 series share the same unique bonded aluminum wing and honeycomb fuselage that eliminates the need for rivets without sacrificing strength. The main landing gear is fibreglass with a spring-steel nose gear tube. There is no nosewheel steering as the nosewheel is free-castering through 180 degrees. Steering is by main wheel differential braking operated by using one's toes to push the tops of the rudder pedals. The wings have dihedral to improve lateral stability.
In 2019, Garmin received a Supplemental Type Certificate for a full G3X Touch glass cockpit installation for the aircraft. [9]
Data from Type Certificate data sheet No.A16EA [10] and Tiger Aircraft [11] [12]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
The Lockheed Vega is an American five- to seven-seat high-wing monoplane airliner built by the Lockheed Corporation starting in 1927. It became famous for its use by a number of record-breaking pilots who were attracted to its high speed and long range. Amelia Earhart became the first woman to fly solo across the Atlantic Ocean in one, and Wiley Post used his to prove the existence of the jet stream after flying around the world twice.
The Cessna 152 is an American two-seat, fixed-tricycle-gear, general aviation airplane, used primarily for flight training and personal use. It was based on the earlier Cessna 150 incorporating a number of minor design changes and a slightly more powerful engine with a longer time between overhaul.
The Piper PA-24 Comanche is an American single-engine, low-wing, all-metal monoplane of semimonocoque construction with tricycle retractable landing gear and four or six seats. The Comanche was designed and built by Piper Aircraft and first flew on May 24, 1956. Together with the PA-30 and PA-39 Twin Comanches, it made up the core of Piper's lineup until 1972, when the production lines for both aircraft were destroyed in the 1972 Lock Haven flood.
The PA-25 Pawnee is an agricultural aircraft produced by Piper Aircraft between 1959 and 1981. It remains a widely used aircraft in agricultural spraying and is also used as a tow plane, or tug, for launching gliders or for towing banners. In 1988, the design rights and support responsibility were sold to Latino Americana de Aviación of Argentina.
The Beechcraft Musketeer is a family of single-engined, low-wing, light aircraft that was produced by Beechcraft. The line includes the Model 19 Musketeer Sport, the Model 23 Musketeer, Custom and Sundowner, the Model 23-24 Musketeer Super III, the retractable gear Model 24R Sierra and the military CT-134 Musketeer.
American Aviation Corporation was an American aircraft manufacturer based in Cleveland, Ohio, in the 1960s, which produced light single-engine aircraft. In 1972, it became the Grumman American Aviation Corporation.
The Grumman American AA-1 series is a family of light, two-seat aircraft. The family includes the original American Aviation AA-1 Yankee and AA-1A Trainer along with the TR2. The TR2 has a cruise prop and the trainer has a climb prop. Typically the TR2 came with more navigation instruments and of course was better for cross country flying because of her speed and lower fuel consumption for equal distances The Grumman American AA-1B Trainer and TR-2, plus the Gulfstream American AA-1C Lynx and T-Cat.
The Bede BD-1 was a two-seat, single-engine, low-wing monoplane, the first design of American aeronautical engineer Jim Bede. The BD-1 was designed in 1960 as a kit-built aircraft intended for home assembly by amateur builders. Design goals included a kit price of $US 2500, including a rebuilt 100 hp (75 kW) engine and a cruise speed of 130 knots (240 km/h). The prototype N624BD first flew in 1962.
The American Aviation AA-2 Patriot was a four-seat, all-metal aircraft that was developed in 1970-71 by American Aviation of Cleveland, Ohio. The design did not progress beyond the prototype stage.
Tiger Aircraft LLC was an American aircraft manufacturer from 1999 to 2006 based in Martinsburg, West Virginia, United States.
The Gulfstream American GA-7 Cougar is an American all-metal, 4-seat, twin-engined light aircraft. The Cougar was a twin-engine development of the Gulfstream American AA-5B Tiger and traces its lineage to the AA-1 Yankee Clipper and the Bede BD-1.
American General Aircraft Corporation, also known as AGAC, was an aircraft manufacturer based in Greenville, Mississippi, between the late 1980s and 1993.
The Grumman G-164 Ag Cat is a single-engined biplane agricultural aircraft, developed by Grumman in the 1950s.
James R. Bede was an American aircraft designer and developer, particularly noted for his development of influential, fast, efficient, light aircraft, including his BD-1, and the BD-4, BD-5 and BD-10 kitplanes. He designed well over a dozen aircraft starting in the 1960s, but a string of business failures, and legal, technical and safety problems kept most of these designs out of widespread use.
The Piper J-5 Cub Cruiser was a larger, more powerful version of the basic Piper J-3 Cub. It was designed just two years after the J-3 Cub, and differed by having a wider fuselage with the pilot sitting in the front seat and two passengers sitting in the rear seat. Equipped with a 75-hp Continental engine the plane's cruising speed was 75 mph. Though officially a three-seater, it would be more accurately described as a "two-and-a-half-seater", as two adults would find themselves quite cramped in the wider rear seat. The Cruiser sold for $1,798 when it was first designed.
The Van's RV-7 and RV-7A are two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft. The RV-7 is the tail-wheel equipped version, while the RV-7A features a nose-wheel.
The Gulfstream American Hustler was a 1970s American mixed-power executive/utility aircraft designed by American Jet Industries, which later changed to Gulfstream American Corporation. The aircraft had a nose-mounted turboprop and a tail-mounted turbofan.
The Rockwell Commander 112 is an American four-seat single-engined general aviation aircraft designed and built by North American Rockwell starting in 1972. In 1976, they introduced the turbocharged version 112TC and mounting a larger engine with other minor improvements they introduced the Rockwell Commander 114. A total of approximately 1,300 examples of all models were produced before the production line shut down in 1980. In 1981, the type certificate owner was Gulfstream Aerospace, but that company had no interest in single-engine piston production.
The Hongdu N-5,, originally known as the Nanchang N-5, is a Chinese agricultural aircraft. First flown in 1989, and entering into production in 1992, the N-5 is a single-engined low-wing monoplane, and is available in versions powered by a piston engine or a turboprop.
The Temco D-16 is a 1950s twin engine civil aircraft from the United States. It was produced by conversion of a Ryan Navion to replace its single engine with two wing-mounted engines. It is commonly known as the Twin Navion, although that name is also often applied to a later similar conversion, the Camair 480.