Laheys Tramway

Last updated

Laheys tramway
History
Opened1900
Closed1933
Technical
Line length16.5 miles (26.6 kilometres)
Track gauge 3 ft 6 in (1,067 mm)
Route map

Contents

km
BSicon exCONTg.svg
opened
1914
BSicon uexd-STR+l.svg
BSicon exdSTRl-.svg
BSicon uexmdvKHSTeq.svg
0½
Canungra
BSicon uexBST.svg
Lahey's Sawmill
BSicon uexTUNNEL1.svg
Lahey's Tramway Tunnel
opened
1905
BSicon uexABZgl.svg
BSicon uexENDEeq.svg
5½
Witheren Siding
BSicon uexABZgl.svg
BSicon uexENDEeq.svg
10½
Ferny Glen Junction
BSicon uexKRWgl.svg
BSicon uexKRW+r.svg
BSicon uexdSTR.svg
BSicon uexdENDEaq.svg
BSicon uexdABZgr.svg
Little Flying Fox Junction
0.5 mi
0.8 km
BSicon uexSTR.svg
BSicon uexENDEe.svg
Flying Fox Creek branch
4 mi
6 km
BSicon uexKRWgl.svg
BSicon uexKRW+r.svg
12½
Prices Creek Junction
BSicon uexSTR.svg
BSicon uexENDEe.svg
Prices Creek branch
2 mi
3 km
BSicon uexENDEe.svg
26½
End of main line [1]
View of the locomotive approaching the tunnel on the Canungra Sawmill tramway. StateLibQld 2 239688 View of the locomotive approaching the tunnel on the Canungra Sawmill tramway.jpg
View of the locomotive approaching the tunnel on the Canungra Sawmill tramway.
Water tanks for the steam locomotive, Canungra. StateLibQld 1 239692 Water tanks for the steam locomotive, Canungra.jpg
Water tanks for the steam locomotive, Canungra.
Canungra Pine Creek Tramway in dense timber region ~ 1914. StateLibQld 1 212388 Canungra Pine Creek Tramway in dense timber region, ca. 1914.jpg
Canungra Pine Creek Tramway in dense timber region ~ 1914.
Shay Locomotive 5, part of the Canungra Pine Creek Tramway, ca. 1914. Two cylinder Shay locomotive on low level bridge, part of the Canungra Pine Creek Tramway. StateLibQld 2 203572 Shay Locomotive 5, part of the Canungra Pine Creek Tramway, ca. 1914.jpg
Shay Locomotive 5, part of the Canungra Pine Creek Tramway, ca. 1914. Two cylinder Shay locomotive on low level bridge, part of the Canungra Pine Creek Tramway.
Laheys sawmill ~1913 StateLibQld 1 157966 Canungra Sawmill, ca. 1913.jpg
Laheys sawmill ~1913

Laheys Tramway or Canungra Pine Creek Tramway was a private timber railway in South East Queensland, Australia. It connected at Canungra on the Canungra line and consisted of a 16+12 miles (26+12 km) 'main line' to Upper Coomera and two branches. [2] Its tunnel was added to the Queensland Heritage Register on 11 April 2005. [3]

Background

Canungra was the centre of regional timber production from the 1860s and the Lahey family built a large sawmill there, completed in 1885. Situated in the middle of a hoop pine forest, logs were initially hauled short distances to the mill by bullock teams, but as the haulage distance increased a more efficient method was required.

History

Rail engineer George Phillips surveyed and designed the route of the tramway. The gauge of 3 ft 6 in (1,067 mm) was chosen to match that of the Queensland Government railways. [4] The tramway opened in 1900, and initially used bullocks. Laid with 35 lb/yd (17 kg/m) rail, the track climbed a ridge at an average grade of 1 in 12½ (8%) to a 300 ft (90 m) tunnel, before descending at an average grade of 1 in 16½ (6%) into the adjacent Coomera River valley, using curves as tight as 120 ft (37 m) radius. One and a quarter miles (2 km) had been built by 1901, and in 1903 the line was 5 miles (8 km) long.

Rolling stock

The first steam locomotive, a Climax locomotive arrived in 1903, and lowered the cost of haulage by 85%.

Another locomotive, a Shay locomotive was purchased from the North Mt Lyell Mining Co. in Tasmania in 1906, and a second Shay was purchased new in 1910. The Climax loco was taken out of service in 1912, but was reconditioned by Walkers of Maryborough in 1914, being permanently withdrawn in 1922. Laheys ordered a third Shay loco in 1911, but it was on-sold to the Hampton Cloncurry Mines Ltd. Co. in 1912 without being used on the tramway.

The line also used a Ford Model T converted to a railmotor and a Commer truck converted to a shunter for use at the mill.

Operations

The line used two types of log bogies, the 'light' model with a capacity of 10 tons and 'heavy' with a capacity of 15 tons. A bogie was placed under each end of a log to create a 'wagon' for transport to the mill. When roller bearing bogies were introduced in 1914, the average load able to be hauled was 6 wagons, a load of up to 90 tons. Whilst there was no formal passenger service, people were able to ride on the log wagons 'at their own risk', and picnic excursions were organised occasionally, planks being used to create temporary 'seating' on the log bogies.

Line extension

By 1907 the line was 6+12 miles (10+12 km) long, and the mill had an annual output of 2,500,000 board feet (5,900 m3) of timber, and in 1909 9,200 tons of logs were hauled on the line, increasing to 15,000 tons in 1915, by which time the line has reached its maximum length of 16+12 miles (26+12 km), plus the 2+12 miles (4 km) Flying Fox Creek branch and the 1+14 miles (2 km) Prices Creek branch, built at a cost of £26,000. Bridges on the line were up to 40 ft (12 m) high and 150 ft (46 m) long, and there were sidings at Witheren, 3 miles (5 km) from Canungra, Ferny Glen Junction 6 miles (9+12 km), Prices Creek Junction 7 miles (11+12 km) and Little Flying Fox Junction on the Flying Fox Creek branch, where an aerial cableway lowered logs 1,000 ft (300 m) from an adjacent spur.

Connections

The mill employed 112 people in 1913, and bullock teams were still used to haul logs from areas not served by the tramway, as well as sawn timber from the mill to the nearest railway station, and in 1911 there were 18 bullock teams moving sawn timber between Canungra and the railway at Logan Village. [5]

A railway from Logan Village to Canungra was first proposed in 1900 [6] with a survey commissioned in 1908. [7] Construction began in 1913 and the line opened on 2 July 1915. [8]

Decline and closure

In 1920 Laheys sold the mill and tramway to the War Service Homes Commission, but it sold the enterprise a few months later to a company associated with one of sons of the Lahey family. [9] By 1930 most of the millable timber had been harvested, and it is estimated the mill had produced a total of 130M superfeet (~307,000 cubic metres) of timber when it closed in 1933. The tramway was dismantled that year, and the Shay locos were offered for sale, without success, as they were recorded as abandoned at Canungra in 1937.

The tunnel remains, and is a local tourist attraction. People were initially able to walk through it and perhaps see the bats that now use it as a roust, but recent safety concerns have led to the tunnel's closure, although it is still possible to walk to its entrances. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Narrow-gauge railway</span> Railway line with a gauge less than the standard of 1435 mm (4 ft 8 1/2 in)

A narrow-gauge railway is a railway with a track gauge narrower than 1,435 mmstandard gauge. Most narrow-gauge railways are between 600 mm and 1,067 mm.

<span class="mw-page-title-main">Corris Railway</span> Narrow gauge railway in Wales

The Corris Railway is a narrow gauge preserved railway based in Corris on the border between Merionethshire and Montgomeryshire in Mid-Wales.

<span class="mw-page-title-main">Shay locomotive</span> Geared steam locomotive

The Shay locomotive is a geared steam locomotive that originated and was primarily used in North America. The locomotives were built to the patents of Ephraim Shay, who has been credited with the popularization of the concept of a geared steam locomotive. Although the design of Ephraim Shay's early locomotives differed from later ones, there is a clear line of development that joins all Shays. Shay locomotives were especially suited to logging, mining and industrial operations and could operate successfully on steep or poor quality track.

<span class="mw-page-title-main">North Coast railway line, Queensland</span> Railway line in Queensland, Australia

The North Coast railway line (NCL) is a 1,681-kilometre (1,045 mi) 1067 mm gauge railway line in Queensland, Australia. It commences at Roma Street station, Brisbane, and largely parallels the Queensland coast to Cairns in Far North Queensland. The line is electrified between Brisbane and Rockhampton. Along the way, the 1680 km railway passes through the numerous towns and cities of eastern Queensland including Nambour, Bundaberg, Gladstone, Rockhampton, Mackay and Townsville. The line though the centre of Rockhampton runs down the middle of Denison Street.

<span class="mw-page-title-main">Canungra, Queensland</span> Town in Queensland, Australia

Canungra is a rural town and locality in the Scenic Rim Region, Queensland, Australia. In the 2016 census, the locality of Canungra had a population of 1,229 people.

<span class="mw-page-title-main">Rail transport in Queensland</span>

The rail network in Queensland, Australia, was the first in the world to adopt 1,067 mm narrow gauge for a main line, and, in 2013, was claimed to the second largest narrow gauge network in the world, consists of:

<span class="mw-page-title-main">Narrow-gauge lines of the Victorian Railways</span> Early to mid 1900s railway system in Victoria, Australia

The former Victorian Railways, the state railway authority in Victoria, Australia, built a number of experimental 2 ft 6 in narrow-gauge lines around the beginning of the 20th century. Although all were closed by the early 1960s, parts of two have been reopened as heritage railways.

NZR E<sup>C</sup> class

The NZR EC class was a class of electric locomotive used in Christchurch, New Zealand. They replaced steam locomotives on trains through the Lyttelton rail tunnel between Lyttelton and Christchurch.

<span class="mw-page-title-main">Powelltown tramway</span> Former tramway in Victoria, Australia

The Powelltown tramway was a 3 ft narrow gauge tramway that operated between Powelltown and Yarra Junction, Victoria, Australia, between 1913 and 1945.

The Caspar, South Fork & Eastern Railroad provided transportation for the Caspar Lumber Company in Mendocino County, California. The railroad operated the first steam locomotive on the coast of Mendocino County in 1875. Caspar Lumber Company lands became Jackson Demonstration State Forest in 1955, named for Caspar Lumber Company founder, Jacob Green Jackson.

<span class="mw-page-title-main">Spider (locomotive)</span> Locomotive

The locomotive to become known as Spider in its service on the Marrawah Tramway, Tasmania was originally a small Baldwin-built steam tram constructed about 1890 for usage on the 4 ft 8+12 in gauge in Bendigo street tramway, Victoria, Australia.

<span class="mw-page-title-main">Bessbrook and Newry Tramway</span>

The Bessbrook and Newry Tramway operated a 3 ft narrow gauge, hydro-electrically powered tramway transporting passengers and freight between Bessbrook and Newry in Northern Ireland between 1885 and 1948.

<span class="mw-page-title-main">Canungra railway line</span>

The Canungra railway line was a branch railway in South East Queensland, Australia. It connected Logan Village on the Beaudesert line and Canungra.

<span class="mw-page-title-main">Mackay Railway</span> Former railway line in Queensland, Australia

The Mackay Railway was a 68 kilometres (42 mi) line situated in the Pioneer River valley in North Queensland, Australia. It opened in a series of sections between 1885 and 1911. It had three short branches, parts of which were initially built by the local government. It closed in sections between 1959 and circa 2007.

<span class="mw-page-title-main">Lahey's Canungra Tramway Tunnel</span> Heritage-listed tunnel in Canungra, Queensland, Australia

Lahey's Canungra Tramway Tunnel is a heritage-listed tunnel on Laheys Tramway at Canungra, Queensland, Australia. It was built from 1901 to 1903 by Mr Clark. It was added to the Queensland Heritage Register on 11 April 2005.

<span class="mw-page-title-main">Lahey's Canungra Sawmill</span> Historic site in Queensland, Australia

Lahey's Canungra Sawmill is a heritage-listed former sawmill at 10-26 Finch Road, Canungra, Scenic Rim Region, Queensland, Australia. It was built in 1884. It was added to the Queensland Heritage Register on 6 March 2009.

<span class="mw-page-title-main">Cooloola Tramway</span> Historic site in Queensland, Australia

The Cooloola Tramway is a heritage-listed tramway at Great Sandy National Park, Cooloola Recreation Area, Cooloola, Gympie Region, Queensland, Australia. In the 1870s it was known as the Kaloola Railway. It is also known as Cooloola Railway, SEQ-5N 22, Pettigrew's Railway, and Pettigrew's Tramway. It was added to the Queensland Heritage Register on 12 July 2013.

The Michigan-California Lumber Company was an early 20th-century Ponderosa and Sugar pine logging operation in the Sierra Nevada. It is best remembered for the Shay locomotives used to move logs to the sawmill.

<span class="mw-page-title-main">Mountain Rimu Timber Company</span>

The Mountain Rimu Timber Company owned and operated a bush tramway near Mamaku, south of the Kaimai Range near Rotorua in the Bay of Plenty Region of the North Island of New Zealand. The tramway, with a track gauge of 3+12 feet (1,067 mm), was used from approximately 1898, to at least 1935.

<span class="mw-page-title-main">Charming Creek Tramway</span>

The Charming Creek Tramway was a 9 kilometres (5.6 mi) long private bush tramway at Ngakawau in Buller District on the West Coast in New Zealand. It was used from 1903 or 1905 to 1958.

References

  1. Kerr, John. Tall Timber and Tramlines Queensland . Retrieved 10 August 2018.
  2. Morgan, R.K. (1975). "Laheys Canungra Tramway". Light Railways Magazine.
  3. "Lahey's Canungra Tramway Tunnel (entry 602529)". Queensland Heritage Register . Queensland Heritage Council. Retrieved 8 November 2018.
  4. 1 2 "Lahey's Canungra Tramway Tunnel" (CC BY 4.0). 2009. Archived from the original on 10 August 2018. Retrieved 8 November 2018.
  5. John Kerr (1998). Forest Industry Heritage Places Study: Sawmills and Tramways, South Eastern Queensland. Department of Agriculture, Fisheries and Forestry. p. 226.
  6. "The Brisbane Courier. FRIDAY, AUGUST 10, 1900". Brisbane Courier. 10 August 1900.
  7. "Proposed Canungra Railway". Brisbane Courier. 11 June 1908.
  8. Milne, Rod (January 1993). "The Canungra Branch". Australian Railway History : 12–19.
  9. Joyce, RB. "Canungra Timber" (PDF). Archived (PDF) from the original on 13 November 2017. Retrieved 10 August 2018.

28°01′23″S153°10′19″E / 28.02309693°S 153.17183202°E / -28.02309693; 153.17183202