MPI HSP46 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sources: [3] |
The MPI HSP46 is a four-axle AC-traction diesel-electric locomotive for commuter trains, designed and assembled by MotivePower. It meets EPA Tier 3 emissions standards. The launch customer is the Massachusetts Bay Transportation Authority (MBTA), whose first unit entered revenue service in April 2014.
The locomotives are powered by GE GEVO-12 diesel engines from GE Transportation, [1] equipped with a static inverter for head end power, and capable of meeting the stringent new Tier 3 emissions regulations. AC traction systems, prime movers, head end power equipment, and computer systems are supplied by GE, while MPI supplies the brake systems, air systems, and cooling systems. [4]
The locomotive was styled by industrial designer Cesar Vergara, who also designed the GE Genesis. [3] [5]
In the mid-2000s the MBTA issued a request for proposal for new diesel locomotives to replace its aging fleet, much of which dated to the late 1970s. [1] Two firms responded: Vossloh España and MotivePower. MBTA selected Vossloh, but the Federal Transit Administration rejected the MBTA's request for a "Buy America Act" waiver because the MBTA "has not identified a significant technological difference between locomotives produced by Vossloh and MotivePower", and that it has "not established sufficient grounds for a public interest waiver". [6] [7] MBTA turned to MotivePower, and ordered 20 new HSP46 locomotives on July 14, 2010, at a cost of $114.6 million. [1]
On July 27, 2011, the MBTA released images of a new paint scheme for the authority's HSP46 fleet. [8] It was chosen by the general public in an online survey. [8]
On July 11, 2012, the MBTA Board voted to approve the first option for seven locomotives, bringing the order total to 27 units. [9] On April 10, 2013, the Board approved the purchase of the remaining 13 option locomotives, bringing the current order total to 40 units (2000–2039), at a total cost of $240 million. [10]
On October 24, 2013, the first pilot unit, No. 2001, was delivered to the MBTA Commuter Rail Maintenance Facility to begin testing and training. Two other pilot units were also released from MotivePower: No. 2000 to GE's Test Facility in Erie, Pennsylvania, and No. 2003 to the Transportation Technology Center test facility in Pueblo, Colorado. Only No. 2001 was given the MBTA paint scheme; the other two test units were unpainted.
On April 16, 2014, No. 2001 entered revenue service, with its first round trip taking place on the Haverhill Line. [11] As of October 2015 [update] , 36 of the 40 locomotives are in service. [12] En route to the MBTA, the locomotives were sent to the Providence & Worcester Railroad, which is subcontracted to MPI to prepare the units for revenue service. [12]
In August 2014, MPI discovered that some traction motor bearings had been shipped improperly to their factory, causing early failures. Locomotives already delivered to the MBTA were repaired on-site, while half of the locomotives were redirected to Altoona Works during delivery for replacement bearings to be installed. The issues were not disclosed to the press until January 2015. [13] While the repairs were performed under warranty at no cost to the MBTA, they constituted an additional delay that prevented some of the units from entering service before the end of 2015. The multiple delays and early mechanical issues have raised concern from industry commentators about the MBTA's procurement process and the overall quality of the locomotives. [13]
Despite multiple repairs and modified, the HSP46s have continued to experience mechanical problems. Turbochargers failed in several locomotives beginning in Fall 2016, and will have to be replaced fleet-wide. [14] Fleet availability fell to 27 of 40 in early April 2017. [15]
The EMD AEM-7 is a twin-cab four-axle 7,000 hp (5.2 MW) B-B electric locomotive built by Electro-Motive Division (EMD) and ASEA between 1978 and 1988. The locomotive is a derivative of the Swedish SJ Rc4 designed for passenger service in the United States. The primary customer was Amtrak, which bought 54 for use on the Northeast Corridor and Keystone Corridor. Two commuter operators, MARC and SEPTA, also purchased locomotives, for a total of 65.
The EMD F40PH is a four-axle 3,000–3,200 hp (2.2–2.4 MW) B-B diesel-electric locomotive built by General Motors Electro-Motive Division in several variants from 1975 to 1992. Intended for use on Amtrak's short-haul passenger routes, it became the backbone of Amtrak's diesel fleet after the failure of the EMD SDP40F. The F40PH also found widespread use on commuter railroads in the United States and with VIA Rail in Canada. Additional F40PH variants were manufactured by Morrison-Knudsen and MotivePower between 1988 and 1998, mostly rebuilt from older locomotives.
The MBTA Commuter Rail system serves as the commuter rail arm of the Massachusetts Bay Transportation Authority's (MBTA's) transportation coverage of Greater Boston in the United States. Trains run over 394 mi (634 km) of track to 134 stations. It is operated under contract by Keolis, which took over operations on July 1, 2014, from the Massachusetts Bay Commuter Railroad Company (MBCR).
A hood unit, in North American railroad terminology, is a body style for diesel and electric locomotives where the body is less than full-width for most of its length and walkways are on the outside. In contrast, a cab unit has a full-width carbody for the length of the locomotive and walkways inside. A hood unit has sufficient visibility to be operated in both directions from a single cab. Also, the locomotive frame is the main load-bearing member, allowing the hood to be non-structural and easily opened or even removed for maintenance.
The Evolution Series is a line of diesel locomotives built by GE Transportation Systems, initially designed to meet the U.S. EPA's Tier 2 locomotive emissions standards that took effect in 2005. The line is the direct succesor to the GE Dash 9 Series. The first pre-production units were built in 2003. Evolution Series locomotives are equipped with either AC or DC traction motors, depending on the customer's preference. All are powered by the GE GEVO engine.
The Bombardier–Alstom HHP-8 is a type of twin-cab electric locomotive manufactured by a consortium of Bombardier Transportation and Alstom for Amtrak and MARC. The locomotive's electrical drive technology is directly derived from the SNCF BB 36000 manufactured by Alstom.
The EMD F59PH is a four-axle 3,000 hp (2 MW) B-B diesel-electric locomotive built by General Motors Electro-Motive Division from 1988 to 1994. A variant, the F59PHI, was produced from 1994 to 2001. The F59PH was originally built for GO Transit commuter operation in the Toronto region. Metrolink in Southern California also purchased a fleet for its 1992 launch. The streamlined F59PHI was designed for Amtrak California intercity service. A total of 72 F59PH and 83 F59PHI locomotives were built.
The passenger locomotives derivatives of the General Motors EMD GP40 diesel-electric locomotive have been, and continue to be, used by multiple passenger railroads in North America. For passenger service, the locomotives required extra components for providing steam or head-end power (HEP) for heating, lighting and electricity in passenger cars. Most of these passenger locomotives were rebuilt from older freight locomotives, while some were built as brand new models.
The MPI MPXpress is a line of diesel-electric locomotives built by MotivePower for commuter rail service. There are five MPXpress models: MP36PH-3S, MP36PH-3C, MP40PH-3C, MP32PH-Q, and MP54AC.
The Alstom PL42AC is a class of four axle B-B diesel-electric locomotive designed by Alstom in association with GM-EMD. 33 were built between 2003 and 2006 for NJ Transit Rail Operations.
The Stadler Euro is a class of diesel-electric locomotives built by Stadler Rail for the European market. It is available in two basic variants, the four-axle Euro 3000, and the six-axle Euro 4000. These locomotives are powered by EMD 710 prime movers. A six-axle electric-only variant is marketed as Euro 6000; it is also built for the Iberian gauge.
The GE PowerHaul is a class of mainline diesel-electric locomotives designed by General Electric. Thirty locomotives were ordered by Freightliner in 2007; the first locomotive was completed in July 2009 at GE's Erie, Pennsylvania, plant.
The MPI MP8AC-3 is a light-weight diesel locomotive built by the MotivePower division of Wabtec. It was designed from scratch as a work train engine for the New York City Subway system, where it is designated the R156.
The EMD F125 "Spirit" is a four-axle passenger diesel locomotive manufactured by Electro-Motive Diesel (EMD) for the North American market since 2015. It is powered by a Caterpillar C175-20 V20 diesel engine rated at 4,700 hp (3,500 kW). The locomotive is capable of traveling at a maximum in-service speed of 125 mph (201 km/h) pulling consists of up to 10 cars. It was EMD's first new passenger locomotive for the North American market in 15 years, with the most recent predecessor passenger locomotive being the EMD DE30AC and DM30AC built for the Long Island Rail Road. So far, Metrolink is the only customer of the F125.
The Siemens Charger is a family of diesel-electric/dual-mode passenger locomotives designed and manufactured by Siemens Mobility for the North American market.
MotivePower, Inc. (MPI) is an American manufacturer of diesel-electric locomotives. The company is a wholly-owned subsidiary of Wabtec, and traces its history back to the MK Rail division of Morrison-Knudsen.
The Diesel Locomotive Factory, Marhowrah is a joint venture of GE Transportation, part of American company Wabtec, with Indian Railways for the production of 1000 high-power freight locomotives over a period of 10 years designed to run on Indian railway tracks. This factory is located at Marhaura and started manufacturing the locomotives from September 2018.
The Indian locomotive class WDG-4G is a class of dual-cabin freight-hauling diesel-electric locomotive used by the Indian Railways (IR). The locomotive is designed by GE Transportation and is based on its Evolution Series, which are used in North America. The class is meant for freight hauling and replaces the older American Locomotive Company (ALCO)-designed locomotives, which have been the mainstay diesels of Indian Railways since 1962. Equipped with a 12-cylinder fully turbocharged GEVO engine, it is claimed to be 50% more environmentally friendly than its predecessors and is the first in the country to be compliant with level one of the emission norms set by the International Union of Railways (UIC-1). The locomotive has two cabs for easy reversal, both of which are air conditioned.
Media related to MPI HSP46 locomotives at Wikimedia Commons