Steamer Mazama, prior to 1912 | |
History | |
---|---|
Owner | Crater Lake Navigation Company |
Route | Upper Klamath Lake and Wood River |
Launched | May 4, 1908 |
Fate | Scrapped |
Notes | Rebuild in 1911 with longer hull, using original engines |
General characteristics | |
Class and type | inland shallow draft passenger/freighter |
Length | As built: 50 ft (15.2 m) reconstructed 1912: 63 ft (19.2 m) |
Beam | As built: 12 ft 9 in (3.9 m) reconstructed 1912: 12 ft 9 in (3.9 m) |
Decks | one |
Installed power | Dual steam engines, 12 horsepower each, twin propellers |
Speed | about 10 miles per hour. |
Capacity | As reconstructed 1912: 25 tons cargo |
Mazama was a small steamboat driven by twin propellers that operated on upper Klamath Lake starting in 1909. [1] Mazama was, reportedly, the only craft ever to navigate the Wood River, a tributary of upper Klamath Lake. [2] For a few years, until the construction of a rail line, Mazama was an important link in transportation system linking Fort Klamath to Klamath Falls.
Mazama ran on a regular route from Klamath Falls to the town of Fort Klamath, Oregon, which required a run up the Wood River, which was a narrow and very crooked stream. [1] Mazama was owned by Jasper B.C. "Jap" Taylor and Millard Fillmore "Cap" Parker. [3] Their business was to haul freight to Agency Landing for Fort Klamath. [3] On the return, the vessel usually transported hay to Klamath Falls. [4]
In March, 1908, articles of incorporation were filed with the Oregon Secretary of State for the Crater Lake Navigation Company, naming Millard Filmore "M.F." Parker (1856-1930), J.B.C. Taylor, and Jennie Gates as the incorporators. [5] The company was capitalized at $5,000, and reportedly all the stock had already been sold. [5] J.B.C. Taylor was to be the general manager. [5] The company's stated corporate purpose was to operate steam and electric boats, carrying passengers and freight, on upper Klamath Lake and its tributaries, including the Wood River. [5]
In early 1908, J.B.C. "Jap" Taylor and M.F. "Cap" Parker began building Mazama near Hanks Landing on upper Klamath Lake. [6] The boat was intended to be 50 feet long, with a 12-foot beam (width), powered by two 12 horsepower steam engines driving twin propellers. [6] By the end of February, the keel had been laid, the frames assembled, and lumber was ready for the sides. [6] The boat was anticipated to be placed in use by May 1. [6] Reportedly it was specially built for operations on the Wood River to make the sharp turns around the river's bends, which could not be done by larger vessels, such as the Winema. [6]
In March 1908, J.B.C. Taylor went to San Francisco to purchase machinery for the steamer which was still under construction. [5] Taylor was able to buy the machinery for $3,500. [7]
The steamer was launched on May 4, 1908, however the machinery had not yet arrived. [8] The engines arrived later that month, and were scheduled to be installed into Mazama in the week starting June 1. [9]
On July 29, 1908, Mazama made its first trip up the Wood River, reaching the Weed Bridge, at river mile 5.9. [10] [11] [12] This was a point three miles away from Fort Klamath. [11] A telephone report from the Klamath Agency had been received stating that the steamer could be seen working its way up the river. [8] [11] Some dredging work had been done at the mouth of the river, for a price of $100, by a Jas. Wheeler, which permitted ready crossing of the bar by boats. [8] [11] The contract for this work was let by the Klamath Falls Chamber of Commerce. [11] The plan was to establish a landing at the point reached by Mazama, through which would travel all traffic between Klamath Falls and Fort Klamath, as well as tourist traffic to and from Crater Lake. [11]
By mid-August 1908, low water in the Wood River made it likely that Mazama would have to suspend its run to Agency Landing. [13] Operation of the Mazama in the river stirred up the sand on the river bottom, which washed downstream and formed a bar at the river mouth, making it difficult for a larger vessel to pass. [13] The bar had been removed several times, but it kept building up again. [13] With the water low, Captain Parker of Mazama planned to use a launch on the Wood River instead of the larger steamer. [13]
On October 11, 1908, while towing a barge around Eagle Point, Mazama was struck by a sudden gust of wind, which capsized the boat. [14] General weather conditions were not stormy at the time. [14] This was in the same area that a high wind had blown over the larger steamer Winema the previous year, 1907. [14]
There was no loss of life among the five or six men who were on board Mazama, as they were able to reach safety on board the barge. [14] Most of the freight also was saved. [14] Mazama lay in six to eight feet of water. [14] M.F. "Cap" Parker the boat's owner proceeded to the scene immediately to make efforts to raise the boat. [14] The first report of the incident stated that "little trouble is anticipated in raising" the vessel. [14]
On December 24, 1910, Mazama reached the landing for Fort Klamath, on the Wood River with a barge loaded with freight in tow. [2] The boat was left overnight anchored in the river, while the crew left to celebrate Christmas. [2] The next day, Captain Parker found the boat had sunk in about six feet of water. [2] There had been a collision between the barge and the steamer, which left a hole in the boat's hull, causing it to flood. [2] Plans were made to raise the Mazama. [2]
In February 1912, Mazama was overhauled and a new hull was constructed for the vessel. [15] The work was done by boat builder I.R. McDonald. [16] The rebuilt boat would be 63 feet long, with a beam (width) of 13 feet, and a maximum carrying capacity of 25 tons of cargo, although 15 tons would be the more usual load. [16]
On May 11, 1912, the new hull was reported to be "practically completed" and that the boat's owners, Parker and Taylor were in the process of installing the machinery from the old boat into the new one. [17] It was thought that the old hull would be converted into a houseboat. [16]
The rebuilt boat was expected to be complete within the next week. [17] The rebuilt steamer was reported to have greater cargo capacity, so that the use of a barge would no longer be necessary. [17] The vessel's speed was estimated to be about ten miles per hour. [17] Passenger accommodations were also included, and the vessel was reportedly better constructed and much safer. [17] While the steamer was undergoing reconstruction, freight had accumulated at the company's dock awaiting transport to various points around the lake. [17]
Mazama would run up the Wood River to the Wood (or Weed) Bridge, which was about 4 miles from Fort Klamath. [16] By 1912, a good road had been built between the steamer landing and Fort Klamath. [16]
In November 1912, Mazama became stranded in the Wood River, when as a result of poorly constructed irrigation canal, most of the water in the river was diverted into the canal, flooding the surrounding area, and leaving insufficient water in the river for Mazama to navigate. [18] The level of the river water was only a few inches, and the steamer would be stranded until the breach in the river bank caused by the diversion could be repaired. [18] Sufficient depth of water would still have to be accumulated in the river to float the Mazama, and it was reported that this could be done by a temporary dam of sandbags, which would require construction of a substantial embankment. [18] This was anticipated to be expensive. [18]
In the fall of 1914, Mazama was caught in the ice on Wood River, and was unable to return to Klamath Falls. [19] Mazama was not able to return to Klamath Falls until March 17, 1915. [19]
Mazama became the sole property of J.B.C. Taylor in 1918. [12]
The second Mazama, although larger than the original, still used the same engines, and was therefore slower, and reportedly "never satisfactory". [4] Mazama’s operations were terminated when the Southern Pacific Railroad reached Chiloquin, Oregon, as the steamer could not compete with the rates charged for rail transport. [4]
On March 13, 1919, the steamer Mazama was advertised for sale, together with two barges, one 16 by 60 feet, the other 14 by 40 feet, for a total price of $600. [20] Mazama was dismantled at some time, after which the hulk lay in the tule reeds for years. [21]
Gazelle was an early sidewheeler on the Willamette River in what is now the U.S. state of Oregon. She did not operate long, suffering a catastrophic boiler explosion on April 8, 1854, less than a month after her trial voyage. This was the worst such explosion ever to occur in the Pacific Northwest states. The wrecked Gazelle was rebuilt and operated for a few years, first briefly as the unpowered barge Sarah Hoyt and then, with boilers installed, as the steamer Señorita. A victim of the explosion was D.P. Fuller, age 28, who is buried in Lone Fir Cemetery in Portland, Oregon.
Washington was an early steamboat operated in the states of California and Oregon. Washington was built in California and was initially operated on the Sacramento River. In 1851, the steamer was purchased and brought on a ship to the Oregon Territory, where it was operated on the Willamette River until the summer of 1853. Washington was sold again, and then transferred to the Oregon coast, where it operated on the Umpqua River, on the Coquille River and on Coos Bay. Washington was able to operate for shorter distances over the open ocean along the Oregon coast. The steamer was wrecked by a boiler explosion in December 1857, near Scottsburg, O.T., on the Umpqua river.
Sarah Dixon was a wooden sternwheel-driven steamboat operated by the Shaver Transportation Company on the Columbia and lower Willamette rivers from 1892 to 1926. Originally Sarah Dixon was built as a mixed use passenger and freight vessel, and was considered a prestige vessel for the time.
Pomona was a steamboat which operated on the Willamette, Columbia and Cowlitz rivers from 1898 to 1940. Pomona was specially designed to operate in low water conditions such as typically prevailed in the summer months in Oregon. Pomona was one of the few steamers that could regularly navigate to Corvallis, Oregon, which was the practical head of navigation on the Willamette. In 1926, Pomona was substantially rebuilt, and served afterwards as a towboat. In 1940, Pomona was converted into an unpowered floating storehouse.
Grahamona was a sternwheel steamboat built in 1912 for the Oregon City Transportation Company, commonly known as the Yellow Stack Line. Grahamona was specially designed to serve on the shallow waters of the upper Willamette River. It was one of the largest steamboats ever to operate on the upper Willamette. In 1920, Grahamona was sold and the name was changed to Northwestern. In 1939, the vessel was sold again, and transferred to Alaska for service on the Kuskokwim River.
Newport was an American steamboat built in 1908 at Yaquina City, Oregon. Now a ghost town, Yaquina City was then the terminus of the Corvallis & Eastern Railroad. For many years Newport transported excursionists in the summer months across a short water route between Yaquina City and the town of Newport, Oregon.
Klamath was the first and only vessel larger than a launch to operate on Lower Klamath Lake, which straddled the border between the U.S. states of Oregon and California. This vessel is chiefly known for having been hauled overland by rail from Lake Ewauna to Upper Klamath Lake. It was also one of only two licensed merchant vessels ever to operate on lower Klamath Lake. During 1905 to 1909, Klamath was an essential link in a transportation line to Klamath Falls which involved rail, stage coach, and steamer travel. The late arrival of railroads to the Klamath lakes region made riverine and lake transport more important to the area.
Hooligan was a sternwheel-driven steamboat that operated on Upper Klamath Lake and the Wood River in the U.S. state of Oregon, mostly in the towing of barges and log rafts. Built in 1909, Hooligan was sold in 1914, rebuilt as an excursion boat, and renamed Annie Laurie. The last attested powered operation of this vessel was in 1916. It appears to have later been used as an unpowered barge by the California Oregon Power Company, a predecessor to Pacific Power and Light.
Winema was the largest steamboat ever to operate on Upper Klamath Lake in the U.S. state of Oregon. The steamer ran from 1905 to 1919, when it was hauled out of the water permanently. Winema was sunk by a sudden squall in August 1907. The vessel was raised, rebuilt and returned to service. The steamer remained out of the water for a number of years in the 1920, until it caught fire in 1925 or 1927 and was destroyed.
The People's Transportation Company operated steamboats on the Willamette River and its tributaries, the Yamhill and Tualatin rivers, in the State of Oregon from 1862 to 1871. For a brief time this company operated steamers on the Columbia River, and for about two months in 1864, the company operated a small steamer on the Clackamas River.
Bonita was a steamboat which operated on the Willamette and Yamhill rivers. This boat was renamed Metlako in 1902, and operated under that name until 1924 on the Columbia River and its tributaries, the Cowlitz, Lewis and Lake rivers. In 1924, Metlako was renamed B. H. Smith Jr., operating under that name until 1931, when the steamer was abandoned. As Bonita, in September 1900, this vessel was the first steamer to pass through the Yamhill locks.
Wenat was a stern-wheel steamboat that, under the name Swan, was built and operated, briefly, on the Tualatin River, in the state of Oregon. In 1858, Swan was sold, moved to the lower Willamette River, renamed Cowlitz, and placed on a route between Portland, Oregon the Cowlitz River.
Steam navigation on Lake Coeur d'Alene lasted from the 1880s to the 1930s. More steamboats operated on Lake Coeur d’Alene than on any other lake west of the Great Lakes. The high point of steam navigation was probably from 1908 to 1913. After that railroads, and increasingly automobile and truck traffic on newly built highways supplanted steam navigation, although some vessels continued to be operated until the mid-1930s.
Mascot was a sternwheel-driven steamboat built in 1890 which operated primarily on a route running from Portland, Oregon down the Willamette and Columbia rivers to points on the Lewis and Lake rivers. Points served included the town of Woodland, Washington, on the main branch of the Lewis, and La Center, Washington on the east fork.
Joseph Kellogg was a stern-wheel driven steamboat that operated on the Willamette, Columbia, and Cowlitz rivers for the Kellogg Transportation Company. It was named after the company's founder, Joseph Kellogg (1812-1903). The sternwheeler Joseph Kellogg was built in 1881 at Portland, Oregon.
Clara Parker was a sternwheel-driven steamboat which was operated on the lower Columbia and lower Willamette rivers in the 1880s. The steamer ran for about ten years out of Astoria, Oregon in towing and jobbing work. In 1890 Clara Parker was rebuilt and renamed Astorian.
Relief was a stern-wheel steamboat that operated on the Columbia and Willamette rivers and their tributaries from 1906 to 1931. Relief had been originally built in 1902, on the Columbia at Blalock, Oregon, in Gilliam County, and launched and operated as Columbia, a much smaller vessel. Relief was used primarily as a freight carrier, first for about ten years in the Inland Empire region of Oregon and Washington, hauling wheat and fruit, and after that was operated on the lower Columbia river.
Nahcotta was a steamboat operated from 1898 to 1928 on a route from Astoria, Oregon to Ilwaco, Washington, and then, from 1908 on, from Astoria to Megler, Washington. Nahcotta ran on the same route for its entire service life, and for much of that time was commanded by Capt. Tom Parker, who started his marine career as a deckhand and who had only three months of formal education.
Telegraph was a sternwheel-driven steamboat built in 1903 in Everett, Washington. Except for the summer of 1905, from 1903 to 1912, Telegraph served in Puget Sound, running mainly on the route from Seattle to Everett, and also from Seattle to Tacoma and Olympia, Washington.
The Callendar Navigation Company, sometimes seen as the Callendar Transportation Company, started in business in the early 1900s. Callendar was formed in the early 1900s, and was based in Astoria, Oregon. Callender was to become one of six large towing companies of the Columbia and Willamette rivers in the early decades of the 1900s, the others being Shaver Transportation, Smith Transportation, Hosford, Knappton Towing Co., and Willamette and Columbia River Towing Co. In 1922, Callendar Navigation merged with Knappton Towboat Co., which existed, with a name change in 1990, and which became part of Foss Marine in 1993.
{{citation}}
: CS1 maint: multiple names: authors list (link){{citation}}
: CS1 maint: multiple names: authors list (link){{citation}}
: CS1 maint: multiple names: authors list (link)