Midland Railway 700 Class

Last updated

Midland Railway 700 Class
Bournville Locomotive Depot ancient ex-Midland double-framed 0-6-0 geograph-2805238-by-Ben-Brooksbank.jpg
No. 22846 at Bournville Locomotive Depot 27 July 1947
Type and origin
Power typeSteam
Designer Matthew Kirtley
Builder Derby Works (26)
Dübs & Co. (150)
John Fowler & Co. (10)
Kitson & Co. (10)
Neilson & Co. (40)
Vulcan Foundry (80)
Build date1869–1874
Total produced316
Specifications
Configuration:
   Whyte 0-6-0
   UIC C n2
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.5 ft 2+12 in (1.588 m)
Loco weight36 long tons 0 cwt (80,600 lb or 36.6 t)
Fuel type Coal
Boiler pressure140 lbf/in2 (965 kPa)
Heating surface1,100 sq ft (100 m2)
Cylinders Two, inside
Cylinder size 17 in × 24 in (432 mm × 610 mm)
Career
Operators MRLMSBR
FS
Class MR: 700
LMS: 1F
FS: 380
Power class1F
Withdrawn1903 - 1951
DispositionAll scrapped

The Midland Railway 700 Class was a large class of double framed 0-6-0 freight steam locomotives designed by Matthew Kirtley for the Midland Railway. They were in the power classification 1F.

Contents

Early withdrawals

Six locomotives - nos. 271/9, 1007/31/52/3 - were withdrawn from service between 1903 and 1905. [1]

Fifty more were sold in 1906 to the Italian State Railway, Ferrovie dello Stato Italiane (FS), where they formed FS Class 380; they had been ordered by one of the constituents of the FS, the Rete Mediterranea. [2] They were meant to fill a gap of valid locomotives after the nationalization of the Italian railways, and therefore were not thought to remain in service for more than a few years; however, some of them remained active into the 1920s. [3]

Numbering

After the Midland Railway's 1907 renumbering scheme, the numbers were:

Numbers 2672/3 were members of the 480 Class; no. 2712 was a member of the 240 Class, [5] which had been given a number in the wrong series as the result of a clerk's error. [6]

Accidents and incidents

22863 at Bournville Shed, 1947 Midland Kirtley double-framed 0-6-0 at Bournville Shed, 1947 (geograph 4979672).jpg
22863 at Bournville Shed, 1947

Military service

78 locomotives of the class were loaned to the War Department during the First World War and were used by the Railway Operating Division of the Royal Engineers for military duties in France. A further three were selected to go but instead were loaned to the London and South Western Railway (LSWR) between December 1917 and February 1920 The locomotives allocated were 2707–11/13–88 of which 2783–85 were sent to the LSWR. [8] The remainder went to France at various dates in 1917 before being returned to the MR in 1919–20. [9] All returned to service with the MR except 2765, which was scrapped at Derby in 1920 after suffering broken frames during its time with the ROD. [10]

One engine, 2717, was cut off in No man's land during the Battle of Cambrai in November 1917 and was subsequently captured by the German army during Operation Michael. The Germans salvaged the engine and used it on their military railway in the Brussels area. Recovered after the war, the engine was returned to the MR. [11]

See also

Notes

  1. Hunt, Essery & James 2002, pp. 70–71.
  2. Hunt, Essery & James 2002, p. 94.
  3. Kalla-Bishop, P.M. (1986). Italian state railways steam locomotives : together with low-voltage direct current and three-phase motive power. Abingdon: Tourret. p. 26. ISBN   0905878035.
  4. Hunt, Essery & James 2002, pp. 9, 11.
  5. Hunt, Essery & James 2002, p. 9.
  6. Hunt, Essery & James 2002, p. 101, note 9.
  7. Earnshaw 1990, p. 6.
  8. Aves 2009, p. 146.
  9. Aves 2009, pp. 157–158.
  10. Aves 2009, p. 147.
  11. Aves 2009, pp. 146–147.

Related Research Articles

<span class="mw-page-title-main">Locomotives of the Midland Railway</span>

The Locomotives of the Midland Railway, followed its small engine policy. The policy was later adopted by the London, Midland and Scottish Railway, and contrasted with the London and North Western Railway's policy. The small engine policy was partly the consequence of a difference in the background of senior managers. In most railway companies, the elite position was the design, construction and maintenance of locomotives. Bigger engines brought more prestige and allowed longer trains. In the Midland, the marketing department was paramount. They recognised that people wanted more frequent, shorter trains rather than an infrequent service. It concentrated on very light, very fast and frequent trains.

Robert J. "Bob" Essery was a British railway modeller and historian with a particular interest in the London Midland and Scottish Railway (LMS) and one of its principal constituents, the Midland Railway (MR).

<span class="mw-page-title-main">Lickey Incline</span> Steep rail incline in England

The Lickey Incline, south of Birmingham, is the steepest sustained main-line railway incline in Great Britain. The climb is a gradient of 1 in 37.7 for a continuous distance of two miles (3.2 km). Constructed originally for the Birmingham and Gloucester Railway (B&GR) and opened in 1840 it is located on the Cross Country Route between Barnt Green and Bromsgrove stations in Worcestershire.

<span class="mw-page-title-main">LMS Stanier Class 8F</span>

The London Midland and Scottish Railway's class 8F is a class of steam locomotive designed for hauling heavy freight. 852 were built between 1935 and 1946, as a freight version of William Stanier's successful Black Five, and the class saw extensive service overseas during and after the Second World War.

<span class="mw-page-title-main">LMS Royal Scot Class</span>

The London, Midland and Scottish Railway (LMS) Royal Scot Class is a class of 4-6-0 express passenger locomotive introduced in 1927. Originally having parallel boilers, all members were later rebuilt with tapered type 2A boilers, and were in effect two classes.

<span class="mw-page-title-main">LMS Patriot Class</span> Class of British locomotives

The Patriot Class was a class of 52 express passenger steam locomotives built for the London Midland and Scottish Railway. The first locomotive of the class was built in 1930 and the last in 1934. The class was based on the chassis of the Royal Scot combined with the boiler from Large Claughtons earning them the nickname Baby Scots. A total of 18 were rebuilt to create the LMS Rebuilt Patriot Class between 1946 and 1948; thereafter those not subjected to rebuilding were often referred to as the Unrebuilt Patriot Class. These remaining 34 unrebuilt engines were withdrawn between 1960 and 1962.

<span class="mw-page-title-main">LMS Hughes Crab</span> British steam locomotive, built 1926–1932

The London Midland and Scottish Railway (LMS) Hughes Crab or Horwich Mogul is a class of mixed-traffic 2-6-0 steam locomotive built between 1926 and 1932. They are noted for their appearance with large steeply-angled cylinders to accommodate a restricted loading gauge.

<span class="mw-page-title-main">LMS Fowler Class 4F</span> Class of steam freight locomotives

The London Midland and Scottish Railway (LMS) Fowler Class 4F is a class of 0-6-0 steam locomotive designed for medium freight work. They represent the ultimate development of Midland Railway's six coupled tender engines. Many trainspotters knew them as "Duck Sixes", a nickname derived from their wheel arrangement.

<span class="mw-page-title-main">Midland Railway 2441 Class</span>

The Midland Railway (MR) 2441 Class was a class of steam locomotive. Introduced by Samuel Johnson in 1899, originally with round-topped fireboxes. Henry Fowler later rebuilt them with Belpaire fireboxes. They were given the power classification 3F. The LMS Fowler Class 3F of 1924 was based on this design.

<span class="mw-page-title-main">Midland Railway 3835 Class</span>

The Midland Railway (MR) 3835 Class is a class of 0-6-0 steam locomotive designed for freight work. The first two were introduced in 1911 by Henry Fowler. After the grouping in 1923 they continued to be built up to 1941 by the LMS as the LMS Fowler Class 4F.

<span class="mw-page-title-main">Midland Railway 2228 Class</span>

The Midland Railway 2228 Class was a class of 0-4-4T side tank steam locomotive designed by Samuel Johnson. They were given the power classification 1P.

<span class="mw-page-title-main">Midland Railway 115 Class</span>

The Midland Railway 115 Class was the third of four classes of 4-2-2 steam locomotive, nicknamed "Spinners", designed by Samuel Waite Johnson. A total of 15 of the class were built between 1896 and 1899. They were capable of reaching speeds of up to 90 miles per hour .. One engine, No. 673, is preserved in the National Collection.

<span class="mw-page-title-main">Midland Railway 2000 Class</span>

The Midland Railway 2000 Class was a class of 40 0-6-4T steam locomotives designed by Richard Deeley. They were known as "flatirons" or "hole-in-the-wall tanks" because of their distinctive shape; their side tanks extended to the front of the smokebox and they had a distinct cut-out in the side tanks to access the motion. They were numbered 2000–2039.

The Midland Railway Johnson 0-6-0 were a class of locomotives serving Britain's Midland Railway system in the late 19th and early 20th centuries. Between 1875 and 1908 the Midland Railway, under the control of locomotive superintendents Samuel Waite Johnson and Richard Deeley, ordered 935 goods tender engines of 0-6-0 type, both from the railway's own shops at Derby and various external suppliers. Although there were many variations between different batches both as delivered and as successively rebuilt, all 935 can be regarded as a single series, one of the largest classes of engine on Britain's railways. The locomotives served as late as 1964, but none of them now survive.

<span class="mw-page-title-main">LNWR Claughton Class</span>

The London and North Western Railway (LNWR) Claughton Class was a class of 4-cylinder express passenger 4-6-0 steam locomotives.

<span class="mw-page-title-main">LMS Rebuilt Royal Scot Class</span>

The London Midland and Scottish Railway (LMS) Rebuilt Royal Scot Class is a class of 4-6-0 steam locomotives. 70 members of this class were rebuilt by the LMS and its successor British Railways (BR) from LMS Royal Scot Class engines by the replacement of their life expired parallel boilers with a type 2A boiler over the period 1943–1955.. They were the second type of LMS 2 and 2A boilered 4-6-0 locomotives, after the rebuild of British Legion and the LMS Rebuilt Jubilee Class.

Locomotives of the London, Tilbury and Southend Railway. Initially, the London, Tilbury and Southend Railway (LTSR) hired Eastern Counties Railway (ECR) locomotives and then after the amalgamation of that railway into the Great Eastern Railway (GER), locomotives from that company were hired. In 1880 the company bought its first locomotive saving on hiring costs from the GER and further engines followed that year. The LTSR principally operated tank engines, which it named after towns on the route. The railway's first locomotive superintendent was Thomas Whitelegg, who in 1910 was succeeded by his son Robert. The LTSR became part of the Midland Railway (MR) in 1912, but nevertheless continued to be operated independently. The Midland removed locomotive names and renumbered engines. The Midland, and its successor the London, Midland and Scottish Railway (LMS), continued to build some designs.

The Midland Railway 2501 Class was a class of 2-6-0 steam locomotives built in the United States in 1899. The Midland's own Derby Works had reached their capacity, and were unable to produce additional engines at the time, and many British locomotive builders were recovering from a labor dispute over working hours, thus the railway placed an order with the Baldwin Locomotive Works for 30 engines. The engines were shipped disassembled as kits of parts, and re-assembled at Derby. Baldwin constructed similar 2-6-0's for the Great Central Railway and Great Northern Railway around the same time.

<span class="mw-page-title-main">Midland Railway 2511 Class</span>

The Midland Railway 2511 Class was a class of 2-6-0 steam locomotives built by the Schenectady Locomotive Works in the United States, as a supplemental order to the 2501 Class built by Baldwin that same year. As with that class, the Midland had turned to American locomotive builders, as their own Derby Works had reached capacity, and was unable to produce additional engines at the time, and many British locomotive builders were recovering from an 1897-1898 labor dispute over working hours.

<span class="mw-page-title-main">Midland Railway 1833 Class</span>

The Midland Railway 1833 Class was a class of thirty 0-4-4T steam locomotives. They are sometimes included with the earlier 1823 Class or the later 2228 Class.

References