SMS Nixe

Last updated

SMS Nixe NH 48212.tif
Nixe in 1899
Class overview
Preceded by Carola class
Succeeded by Charlotte
History
NameNixe
Namesake Nixe
OrderedAugust 1882
Builder Kaiserliche Werft Danzig
Laid downAugust 1883
Launched23 July 1885
Commissioned1 April 1886
Stricken24 June 1911
FateSold, 1 April 1923 and converted into a lighter, broken up in 1930
General characteristics
Type Screw corvette
Displacement Full load: 1,982  t (1,951 long tons)
Length63.3 meters (207 ft 8 in) (loa)
Beam13.2 m (43 ft 4 in)
Draft5.52 m (18 ft 1 in)
Installed power
Propulsion
Sail plan Full ship rig
Speed10.4 knots (19.3 km/h; 12.0 mph)
Range1,480 nautical miles (2,740 km; 1,700 mi) at 8 kn (15 km/h; 9.2 mph)
Crew
  • 27 officers
  • 331 sailors
Armament

SMS Nixe was a screw corvette built for the German Kaiserliche Marine (Imperial Navy) in the 1880s. She was laid down in August 1883, launched in July 1885, and commissioned into the fleet in April 1886. Hopelessly out of date even by the time she was ordered in 1882 and possessing insufficient gun power or speed, she was nevertheless completed as designed. In addition to those shortcomings, she proved to be difficult to handle in service and was particularly affected by wind.

Contents

Nixe served as a training ship for naval cadets and apprentice seamen for nearly fifteen years. During this period, she went on overseas training cruises, frequently to South America, the West Indies, or the Mediterranean Sea. She was used as a headquarters ship for the High Seas Fleet from 1906 to 1910, when the Reichstag cut funding for the vessel. She was stricken from the naval register in June 1911 and used as a barracks ship until April 1923, when she was renamed Hulk C and sold to a private shipping company, which converted her into a lighter and used in that role from 1925 to 1930 under her original name, when she was broken up.

Design

After the Franco-Prussian War of 1870–1871, the Kaiserliche Marine began an expansion program to strengthen the fleet to meet the demands imposed by Germany's increased economic activities abroad and to prepare it for a potential future conflict with France. Through the mid and late 1870s, the German fleet ordered twelve corvettes of the Bismarck and Carola classes; these vessels had limited combat capabilities, emphasizing long range cruising rather than engaging hostile cruisers. This program began under the direction of General Albrecht von Stosch, the chief of the Kaiserliche Admiralität (Imperial Admiralty); the contract to build a new corvette, Nixe, was awarded in August 1882. Stosch was replaced in 1883 by General Leo von Caprivi. Caprivi believed that all new cruisers should have a more balanced design that placed greater emphasis on combat power. [1] [2] [3]

Though the ships of the Carola class had not yet been completed, the Admiralität was bound by the fleet plan that had been adopted in 1873, and so despite Caprivi's preferences, construction of Nixe and the similar but larger corvette Charlotte went ahead. Nixe in particular had an insufficiently powerful propulsion system and a too weak battery of guns, leaving her essentially useless as a combat vessel. The historians Hans Hildebrand, Albert Röhr, and Hans-Otto Steinmetz stated that "why no one objected to the building of this ship cannot be determined from the record." [3] They suggested that Caprivi's inexperience, since he had just replaced Stosch, contributed to the decision to allow construction to proceed. They also argued that inconclusive debates in the Reichstag (Imperial Diet) over the needs of the navy pressured the Admiralität into adhering to the plan despite the obvious shortcomings of the design. [3]

Characteristics

Nixe was 54.35 meters (178 ft 4 in) long at the waterline and 63.3 meters (207 ft 8 in) long overall. She had a beam of 13.2 m (43 ft 4 in) and a draft of 5.52 m (18 ft 1 in) forward and 6.36 m (20 ft 10 in). She displaced 1,781 metric tons (1,753 long tons ) as designed and up to 1,982 t (1,951 long tons) at full load. The ship's hull was constructed with transverse iron frames with one layer of wood planks, which were sheathed with copper to prevent biofouling on extended cruises abroad, where shipyard facilities were not readily available. Her hull was divided into nine watertight compartments. [4] [5]

The ship's crew consisted of 27 officers and 331 enlisted men, though as a training ship later in her career, her complement amounted to 17 officers and 354 sailors, of whom 125 were naval cadets. She carried a variety of small boats, including one picket boat, one launch, three (later two) cutters, two yawls, and two (later one) dinghies. Steering was controlled with a single rudder. The vessel was a very poor sea boat, and yawed badly when running before the wind; without her sails, the rudder had to be kept at 5–10 degrees to the leeward side to keep the ship on a straight course. She also lost significant speed in a head sea. [4]

Machinery

The ship was powered by a 2-cylinder marine steam engine that drove a single shaft with one 2-bladed screw propeller. Steam was provided by two coal-fired fire-tube boilers, which were ducted into a retractable funnel. The ship was designed for a top speed of 9 knots (17 km/h; 10 mph) at 700 metric horsepower (690  ihp ), though she reached 10.4 knots (19.3 km/h; 12.0 mph) at 724 PS (714 ihp) on speed trials. Coal storage amounted to 125 t (123 long tons). She had a cruising radius of 1,480 nautical miles (2,740 km; 1,700 mi) at a speed of 8 knots (15 km/h; 9.2 mph), though this fell to 1,120 nmi (2,070 km; 1,290 mi) at 10 knots (19 km/h; 12 mph). As built, Nixe was equipped with a full ship rig to supplement their steam engines on overseas cruising missions, though this was later reduced. [4] [5]

Armament

Nixe was armed with a battery of eight 12.5 cm (4.9 in) L/23 breech-loading guns, two of which were later removed; these were supplied with a total of 800 shells. These guns had a range of 5,000 m (16,000 ft). Later in her career, two 8.8 cm (3.5 in) SK L/30 quick-firing guns and four 37 mm (1.5 in) Hotchkiss revolver cannon were added. The two 8.8 cm guns were given a total of 300 shells. [4] [5]

Service history

Construction – 1894

Nixe
moored to a buoy SMS Nixe NH 65765.tif
Nixe moored to a buoy

Nixe was laid down at the Kaiserliche Werft (Imperial Shipyard) in Danzig in August 1883 under the contract name Ersatz Medusa as a replacement for the old corvette. She was launched on 23 July 1885 and at the launching ceremony, the director of the shipyard, Konteradmiral (Rear Admiral) Johann-Heinrich Pirner christened the ship after the Nixe water spirits of German mythology. She was commissioned on 1 April 1886 and began sea trials. She then went into the Kaiserliche Werft in Kiel, where she was fitted out as a training ship for naval cadets and Schiffsjungen (apprentice seamen). Nixe went on her first cruise with a contingent of Schiffsjungen from 17 to 31 May. [3] [4]

Nixe began her first major overseas cruise on 15 June, which went to South and Central America. She first visited Bahía Blanca and then toured the West Indies. While in St. Thomas, she joined the Training Squadron and left with the rest of the ships to return to Germany on 3 February 1887. They stopped in Queenstown, Ireland on 4 March, where Nixe left the Training Squadron to proceed independently, stopping in Lisbon, Portugal and Gibraltar before finally arriving back in Kiel on 25 July. She took part in the annual fleet maneuvers from 6 to 28 August in the Bay of Danzig and then served as the guard ship in Wilhelmshaven for the Marinestation der Nordsee (North Sea Naval Station) from 17 September 1887 to 17 April 1888. [3]

Nixe resumed training duties in April, first with short cruises in the Baltic Sea. On 4 June, she embarked on her next major cruise to visit the West Indies and ports in Canada, arriving back in Kiel on 9 September 1889. She was decommissioned on 30 September and then recommissioned on 9 April 1890. The ship conducted more Baltic training cruises until 10 June, when she went on another cruise to the West Indies; during this voyage, she visited ports in Venezuela and Norfolk, Virginia in the United States. She reached Kiel on 25 August 1891 and immediately joined the fleet maneuvers, which lasted until 18 September. [3]

The next year's training program began on 1 April 1892, and it followed the same pattern as the previous year, but the overseas cruise instead went to the Mediterranean Sea. During this trip, the crew suffered an outbreak of typhoid. The annual fleet maneuvers followed her return in early September, after which she began the winter training cruise on 23 September, again to the West Indies. This was the first such voyage that Nixe carried a group of cadets from the Marineschule (Naval School). On her return to Germany on 15 March 1894, Nixe was decommissioned for a modernization at the Kaiserliche Werft in Danzig. [6]

1897–1930

Nixe
underway, c. 1892 Bundesarchiv Bild 146-2008-0167, Segelschiff "SMS Nixe".jpg
Nixe underway, c. 1892

Nixe returned to service on 1 April 1897; in late September she began the winter training cruise to the West Indies, and while on the return voyage, she was diverted to Kamerun to participate in the funeral ceremonies for the funeral of Ndumbe Lobe Bell, the pro-German leader of the Duala people, on 12 December. Nixe left Kamerun on 12 January 1898 and arrived in Kiel on 19 March, after which she underwent periodic maintenance. The ship went on training cruises in the Baltic, and on 15 August she began the next overseas cruise, which went to South America, including stops in Brazil and Argentina. While in São Francisco do Sul, Brazil, a portion of her crew visited the German enclave in Joinville. Nixe reached Kiel on 1 April 1899 and went into the shipyard for another overhaul. [7]

After returning to service, Nixe started the next major training cruise in mid-May, which again went to the West Indies. While in the Caribbean Sea, a revolution broke out in Venezuela, prompting the German government to order Nixe to visit the ports of La Guaira and Puerto Cabello to protect German interests from the violence. On 6 November, she was replaced by the corvettes Stosch and Moltke, allowing Nixe to resume her training duties before returning to Kiel on 26 March 1900. She began the year's training program on 25 May with a short cruise to Vlissingen, the Netherlands from 31 May to 6 June. [7]

She then went on a training cruise to visit St. Petersburg, Russia. On returning from the trip, she was decommissioned to free her crew for other purposes, as the navy was facing a shortage owing to the expedition to China to participate in the suppression of the Boxer Uprising. The navy had planned to modernize the ship in 1901, but the loss of the corvette Gneisenau off Málaga forced the Admiralität to reduce the modernization to a simple reduction in her rigging. She was not recommissioned until 1 November 1906, however, and she was used only as a headquarters ship for the High Seas Fleet. [7]

The Reichstag did not allocate funds for the reactivation of Nixe in the 1910 fiscal year, however, and so she had to be decommissioned again on 18 May. Nixe was stricken from the naval register on 24 June 1911, the last sailing ship of the Imperial Navy still on the register, and converted into a barracks ship at Kiel. She served on that capacity, attached to the Naval Gunnery School, into the 1920s. On 1 April 1923, she was renamed Hulk C, and was sold to a private firm. Converted into a sea-going lighter and renamed Nixe, she was operated by the firm Emil Retzlaff, based in Stettin, until 1930, when she was broken up in Wewelsfleth. [4] [7]

Notes

  1. Sondhaus, pp. 116–117, 136–137, 166.
  2. Lyon, pp. 251–252.
  3. 1 2 3 4 5 6 Hildebrand, Röhr, & Steinmetz, p. 165.
  4. 1 2 3 4 5 6 Gröner, p. 92.
  5. 1 2 3 Lyon, p. 252.
  6. Hildebrand, Röhr, & Steinmetz, pp. 165–166.
  7. 1 2 3 4 Hildebrand, Röhr, & Steinmetz, p. 166.

Related Research Articles

SMS <i>Gneisenau</i> (1879) Screw corvette of the German Imperial Navy

SMS Gneisenau was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian Field Marshal August von Gneisenau. She was the fifth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Gneisenau was laid down in June 1877, launched in September 1879, and was commissioned into the fleet in October 1880. She was armed with a battery of fourteen 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Moltke</i> (1877) Screw corvette of the German Imperial Navy

SMS Moltke was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian Field Marshal Helmuth von Moltke the Elder. She was the fourth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Moltke was laid down in July 1875, launched in October 1877, and was commissioned into the fleet in April 1878. She was armed with a battery of ten 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Brandenburg</i> Battleship of the German Imperial Navy

SMS Brandenburg was the lead ship of the Brandenburg-class pre-dreadnought battleships, which included Kurfürst Friedrich Wilhelm, Weissenburg, and Wörth, built for the German Kaiserliche Marine in the early 1890s. She was the first pre-dreadnought built for the German Navy; earlier, the navy had only built coastal defense ships and armored frigates. The ship was laid down at the AG Vulcan dockyard in 1890, launched on 21 September 1891, and commissioned into the German Navy on 19 November 1893. Brandenburg and her three sisters were unique for their time in that they carried six heavy guns instead of the four that were standard in other navies. She was named after the Province of Brandenburg.

SMS <i>Victoria Louise</i> Protected cruiser of the German Imperial Navy

SMS Victoria Louise was the lead ship of her class of protected cruisers, built for the German Imperial Navy in the late 1890s. She was laid down at the AG Weser shipyard in 1895, launched in March 1897, and commissioned into the German fleet in February 1899. She was named after Princess Victoria Louise, the daughter of Kaiser Wilhelm II. The ship was armed with a battery of two 21 cm guns and eight 15 cm guns and had a top speed of 19.2 knots.

SMS <i>Vineta</i> (1897) Protected cruiser of the German Imperial Navy

SMS Vineta was a protected cruiser of the Victoria Louise class, built for the German Imperial Navy in the 1890s. Vineta was laid down at the AG Vulcan shipyard in 1895, launched in April 1897, and commissioned into the Navy in July 1898. The ship, named for the semi-legendary medieval town of Vineta, was armed with a battery of two 21 cm guns and eight 15 cm guns and had a top speed of 19 knots.

SMS <i>Hildebrand</i> Coastal defense ship of the German Imperial Navy

SMS Hildebrand was the fifth vessel of the six-member Siegfried class of coastal defense ships built for the German Imperial Navy. Her sister ships were Siegfried, Beowulf, Frithjof, Heimdall, and Hagen. Hildebrand was built by the Kaiserliche Werft at Kiel between 1890 and 1893, and was armed with a main battery of three 24-centimeter (9.4 in) guns. She served in the German fleet throughout the 1890s and was rebuilt in 1900–1902. She served in the VI Battle Squadron after the outbreak of World War I in August 1914, but saw no action. Hildebrand was demobilized in 1915 and used as a barracks ship thereafter. She ran aground while en route to the Netherlands for scrapping in 1919, and was eventually broken up in situ in 1933.

SMS <i>Hagen</i> Coastal defense ship of the German Imperial Navy

SMS Hagen was the final vessel of the six-member Siegfried class of coastal defense ships built for the German Imperial Navy. Her sister ships were Siegfried, Beowulf, Frithjof, Heimdall, and Hildebrand. Hagen was built by the Kaiserliche Werft in Kiel between 1891 and 1893, and was armed with a main battery of three 24-centimeter (9.4 in) guns. She served in the German fleet throughout the 1890s and was rebuilt in 1900 - 1902. She served in the VI Battle Squadron after the outbreak of World War I in August 1914, but saw no action. Hagen was demobilized in 1915 and used as a barracks ship thereafter. She was ultimately sold for scrap in 1919 and subsequently dismantled.

SMS <i>Stein</i> Screw corvette of the German Imperial Navy

SMS Stein was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian statesman Heinrich Friedrich Karl vom und zum Stein. She was the sixth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Stein was laid down in 1878, launched in September 1879, and was commissioned into the fleet in October 1880. She was armed with a battery of twelve 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Stosch</i> Screw corvette of the German Imperial Navy

SMS Stosch was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named for Admiral Albrecht von Stosch, the first chief of staff of the newly created Imperial Navy. She was the third member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Stosch was laid down in November 1875, launched in October 1876, and was commissioned into the fleet in June 1879. She was armed with a battery of ten 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Bismarck</i> Screw corvette of the German Imperial Navy

SMS Bismarck was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. She was the lead ship of her class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Bismarck was laid down in November 1875, launched in July 1877, and was commissioned into the fleet in August 1878. She was armed with a battery of sixteen 15 cm (5.9 in) guns and had sails, a full ship rig to supplement her steam engine on long cruises abroad.

<i>Bismarck</i>-class corvette Screw corvette class of the German Imperial Navy

The Bismarck-class corvettes were a class of six corvettes built for the German Kaiserliche Marine in the 1870s. The six ships were Bismarck, Blücher, Stosch, Moltke, Gneisenau, and Stein. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and they were designed to serve as fleet scouts and on extended tours in Germany's colonial empire. The ships were armed with a battery of between ten and sixteen 15 cm (5.9 in) guns and they had a full ship rig to supplement their steam engine on long cruises abroad. One ship, Blücher, was converted into a torpedo testing and training ship shortly after she was completed, having her guns replaced with a variety of torpedo launchers.

SMS <i>Leipzig</i> (1875) Screw corvette of the German Imperial Navy

SMS Leipzig was a German flush-deck steam corvette, the lead ship of the Leipzig class, named after the 1813 Battle of Leipzig. She was built for the Kaiserliche Marine in the 1870s, being laid down in early 1875, launched in September that year, and commissioned into the fleet in May 1877. She had one sister ship, SMS Prinz Adalbert. Intended for long cruises abroad, the ship was fitted with a full ship rig to supplement her steam engine if coal was unavailable. She carried a battery of twelve 17 cm (6.7 in) guns.

SMS <i>Wacht</i> Aviso of the German Imperial Navy

SMS Wacht was an aviso of the Imperial German Navy, the lead ship of her class. She had one sister ship, Jagd. Wacht was built by the AG Weser shipyard; she was laid down in 1886, launched in August 1887, and commissioned in August 1888. She served in the active fleet through the 1890s and participated in numerous training exercises. Her career was cut short on 4 September 1901, when she collided with the old ironclad SMS Sachsen. The latter's ram bow holed Wacht under the waterline and caused her to rapidly sink. Her crew was safely rescued, however, and there were no casualties.

SMS <i>Jagd</i> Aviso of the German Imperial Navy

SMS Jagd was an aviso of the Imperial German Navy, the second and final member of the Wacht class. She had one sister ship, Wacht. Jagd was laid down in 1887 at the AG Weser shipyard, launched in July 1888, and commissioned in June 1889. She served in the German fleet for the next fifteen years, until she was withdrawn from active duty in 1904. Thereafter, she was used as a harbor ship. In 1910, she was stricken from the naval register and hulked. She was later used as a torpedo training platform until 1920, when she was sold for scrapping.

SMS <i>Charlotte</i> Screw corvette of the German Imperial Navy

SMS Charlotte was a German screw corvette built for the Kaiserliche Marine in the 1880s, being laid down in April 1883, launched in September 1885, and commissioned in November 1886. The only vessel of her class, Charlotte was the last sailing warship built for the German navy. She was armed with a battery of eighteen 15 cm (5.9 in) guns.

SMS <i>Mars</i> (1879)

SMS Mars was an artillery training ship of the German Kaiserliche Marine, built in the late 1870s.

SMS <i>Sophie</i> Screw corvette of the German Imperial Navy

SMS Sophie was a member of the Carola class of steam corvettes built for the German Kaiserliche Marine in the 1880s. Intended for service in the German colonial empire, the ship was designed with a combination of steam and sail power for extended range, and was equipped with a battery of ten 15-centimeter (5.9 in) guns. Sophie was laid down at the Kaiserliche Werft in Danzig in 1880, she was launched in November 1881, and she was completed in August 1882.

SMS <i>Freya</i> (1874) Screw corvette of the Prussian and German Imperial Navy

SMS Freya was a steam corvette of the German Kaiserliche Marine. She was the third member of the Ariadne class, which included two other ships, Ariadne and Luise. Ordered as part of a large naval expansion program after the Austro-Prussian War, she was laid down in 1872 after the Franco-Prussian War. She was launched in December 1874 and completed in October 1876. Freya was built to a different design than her sisters, being longer and carrying a heavier battery of twelve guns.

SMS <i>Prinz Adalbert</i> (1876) Screw corvette of the German Imperial Navy

SMS Prinz Adalbert was a steam corvette of the German Kaiserliche Marine, the second and final member of the Leipzig class. She was laid down in 1875 at the AG Vulcan shipyard in Stettin, was launched in June 1876, and was commissioned into the fleet in August 1877. Originally named Sedan after the Battle of Sedan of the Franco-Prussian War, she was renamed Prinz Adalbert to avoid antagonizing France in 1878, less than a decade after the battle.

References

Further reading