SMS Medusa (1864)

Last updated

Willy Stower - Seegefecht bei Jasmund crop of Nymphe.jpg
Illustration of Medusa's sister ship Nymphe at the Battle of Jasmund, by Willy Stöwer
History
NameMedusa
Namesake Medusa
Builder Königliche Werft , Danzig
Laid down6 February 1862
Launched20 October 1864
Commissioned10 April 1867
Stricken5 April 1881
Fate Broken up, 1891
General characteristics
Class and type Nymphe-class corvette
Displacement Full load: 1,202 metric tons (1,183 long tons)
Length64.9 m (212 ft 11 in) (loa)
Beam10.2 m (33 ft 6 in)
Draft3.92 m (12 ft 10 in)
Installed power
Propulsion
Speed12 knots (22 km/h; 14 mph)
Range1,250 nautical miles (2,320 km; 1,440 mi) at 12 knots (22 km/h; 14 mph)
Crew
  • 14 officers
  • 176 sailors
Armament
  • 10 × 36-pounder guns
  • 6 × 12-pounder guns

SMS Medusa was a steam corvette built for the Prussian Navy in the 1860s. She was the second and final member of the Nymphe class, ordered as part of a naval expansion program to counter the Danish Navy over the disputed ownership of Schleswig and Holstein. Medusa was laid down in February 1862, was launched in October 1864, and was completed in September 1865. She had one sister ship, Nymphe, and the vessels were wooden-hulled ships armed with a battery of sixteen guns.

Contents

Medusa went on two major overseas cruises during her career, the first to the Mediterranean Sea in 1867–1868 during the Cretan Revolt against Ottoman rule. The second, lengthier voyage lasted from 1868 to 1871, and centered on operations in East Asia. There, she protected individuals from the German states in Japan during the final stage of the Boshin War, helped to suppress Chinese pirates, and visited numerous ports to show the flag. After the outbreak of the Franco-Prussian War in 1870, Medusa was trapped in Yokohama, Japan by a French squadron blockading the port; as a result, she saw no action during the conflict.

After returning to unified Germany in 1872, Medusa was converted into a training ship, a role she filled for the next eight years. During this period, she went on a number of training cruises, both in the Baltic Sea and longer voyages to North, Central, and South America, as well as the Mediterranean. She helped to monitor tensions in the Balkans in the mid-1870s and helped to secure restitution for the murder of a German diplomat in Salonika. Worn out by 1880 and in need of a thorough overhaul, the navy instead decided to remove the ship from service, using her as a hulk until 1891, when she was sold for scrap.

Design

The two Nymphe-class corvettes were ordered in the early 1860s as part of a program to strengthen the Prussian Navy when the likelihood of a conflict with Denmark over the Schleswig-Holstein Question increased. [1] The design for the class was completed in 1861 and work began on both ships the next year. [2]

Medusa was 64.9 meters (212 ft 11 in) long overall, with a beam of 10.2 m (33 ft 6 in) and a draft of 3.92 m (12 ft 10 in) forward. She displaced 1,202 metric tons (1,183 long tons ) at full load. The ship's crew consisted of 14 officers and 176 enlisted men. She was powered by a single marine steam engine that drove a 2-bladed screw propeller, with steam provided by four coal-fired fire-tube boilers, which gave her a top speed of 12 knots (22 km/h; 14 mph) at 800 metric horsepower (790  ihp ). She had a cruising radius of 1,250 nautical miles (2,320 km; 1,440 mi) at a speed of 12 knots (22 km/h; 14 mph). Medusa was equipped with a full ship rig to supplement her steam engine. [2] [3]

Medusa was armed with a battery of ten 36-pounder guns and six 12-pounder guns, all on the broadside. In 1869, these guns were replaced with seventeen, and later nineteen, 12 cm (4.7 in) 23-caliber guns. Later in her career, these were reduced to nine guns. [2] [3]

Service history

Medusa was ordered in 1861, and her name was assigned by an order from the Prussian Navy Department on 23 July 1861, before work began on the vessel. Her keel was laid down on 6 February 1862 at the Königliche Werft (Royal Shipyard) in Danzig, but work proceeded slowly owing to budgetary disputes between the Landtag (State Diet) and the Prussian Minister of War, Albrecht von Roon, who was also the naval minister. In addition, the navy wanted to use the experience gained in building her sister ship Nymphe during the construction of Medusa. These issues were pushed aside by the outbreak of the Second Schleswig War against Denmark in early 1864, since new warships were needed to counter the significantly stronger Danish fleet. On 20 October, Medusa was launched, though the war ended ten days later. Fitting-out work then commenced, and the ship was ready to begin sea trials on 15 September 1865, which were conducted between Danzig and Swinemünde and lasted to the end of the month. [2] [4]

First overseas deployment

The navy planned to send Medusa on an expedition to the North Pole, but it abandoned the plan, and Medusa remained out of service through 1866, including during the Austro-Prussian War. On 10 April 1867, the ship was finally commissioned; this was followed by more sea trials from 15 to 22 May, after which she conducted training exercises that lasted until 25 August. These exercises were at times in company with the frigate Hertha. After the outbreak of the Cretan Revolt in 1866, what was now the North German Federal Navy decided to send a squadron to the Mediterranean Sea to protect German interests on the island and in the surrounding area. Medusa, Hertha, and the gunboat Blitz were assigned to the unit. Before they left, Medusa was fitted with an experimental oven to allow her crew to bake fresh bread during the deployment in the interest of improving the crew's rations, rather than relying entirely on hardtack. The three ships left Kiel on 14 September 1867; the first leg of the trip, to Portsmouth, Britain, saw the ships carry a crew for the new ironclad Kronprinz, which had just been completed there. After depositing the crew to take Kronprinz back to Germany, Medusa, Hertha, and Blitz continued on to the Mediterranean. [4] [5]

In late October, Medusa and Blitz arrived off Crete to participate in an international squadron to protect the local Greek civilians from the occupying Ottoman Army, but the necessity for their presence soon ended. The North German chancellor, Otto von Bismarck, initiated a conference between the Great Powers in Paris, France to avoid a wider war over the island. On 8 December, the three German ships met in Smyrna in the Ottoman Empire, and in early January 1868, the squadron commander, Kapitän zur See (KzS—Captain at Sea) Eduard Heldt went to visit the Ottoman government in Constantinople. This required passage through the Dardanelles and the Sea of Marmara, which were closed to large foreign warships, so Heldt had to transfer to Medusa for the voyage. From 12 to 24 January, Medusa began a tour of the Aegean Sea. The Mediterranean squadron was recalled on 16 February owing to increased tensions with France. Medusa initially stopped in Alexandria in Egypt before making the voyage home. She arrived back in Kiel in mid-April, and was scheduled to be equipped immediately for a deployment to East Asia, but the planned assignment was cancelled and she was instead decommissioned in Kiel on 15 May. [6]

Second overseas deployment

Medusa was recommissioned on 20 August and was transferred to Danzig, though on 25 September she moved back to Kiel. She was sent to assist the Russian frigate Alexander Nevsky, which had run aground off Aarhus, but she was recalled before arriving when it became clear that the ship was beyond salvaging. On 20 October, she left Germany for an extended cruise abroad. She reached Rio de Janeiro, Brazil, on 15 December, where she was visited by Emperor Pedro II. Medusa continued the voyage on 3 January 1869, crossing the Indian Ocean and stopping at the island of Île Saint-Paul on 14 February. She sailed on to Batavia in the Dutch East Indies, where she met the Bremen-flagged full-rigged ship Adele, which had caught fire and burned badly. Medusa towed Adele to Singapore, where the crew could return home. [7]

German 1872 map of China, Japan, and Korea China (ostl. Theil), Korea und Japan im Massstab 1-7.500.000 LOC 2006629397.jpg
German 1872 map of China, Japan, and Korea

On Medusa's arrival in Singapore, the East Asia Station, which the Navy Department had ordered established in 1867, could finally be created. Medusa initially served as the flagship of the squadron until her long-time consort Hertha arrived on 12 February 1870 to take over that function. In the meantime, Medusa was first tasked with searching for an appropriate location for a coaling station that could be used to support the German squadron; she examined Blair's Harbour on the Malay Peninsula, the Ryukyu Islands, and the Gotō Islands. After returning to Singapore, Medusa received news from the German ambassador to Japan, Max von Brandt, that the Japanese had begun persecuting Europeans in the country, and that her presence was necessary to protect them. She left Singapore on 16 May 1869 and stopped briefly in Hong Kong, where she was present for the official renaming of the Prussian embassy there to the North German embassy, before continuing to Japan. She reached Hakodate in early June, where her crew observed the destruction of the former Prussian corvette Danzig, which had been sold to the Tokugawa Shogunate and renamed Kaiten. [7]

Medusa sailed to Yokohama and then to Edo, where on 19 August she joined an international fleet of warships organized to pressure the Japanese Meiji government, then in the closing days of the Boshin War, to suppress the attacks on Europeans in the country. Medusa, being one of the shallower-draft vessels of the fleet, anchored close to shore, near the Japanese ironclad Kōtetsu. Negotiations were successfully completed the next day, and Medusa sailed back to Yokohama. She was caught in a typhoon while en route and was badly damaged when a barque was driven into her by the strong winds. During the storm, the United States sloop USS Idaho was also seriously damaged, and Medusa came to her aid; her crew were thanked by President Ulysses S. Grant for their actions. Medusa was under repair in Yokohama until late October. [7]

Pirate attacks in Chinese waters drew Medusa there after repairs were completed; at the request of the German ambassador in Beijing, she operated with British warships to track down pirates attacking European merchant ships. A German barque, Apenrade, that was carrying a load of tea to New York had been attacked off Macao by a pirate junk. Medusa went there on 15 November to track down the pirates; on reaching Apenrade, the Germans discovered that her captain had been injured and a sailor had been killed, but most of her cargo remained, as the pirates had been scared off by the approach of another vessel. Apenrade went back to Macao, and Medusa began the search, along with one Portuguese, one United States, and two Chinese gunboats. The Portuguese gunboat captured the junk, sank it, and carried the crew to Guangzhou, where they were tried and executed for their crime. During the search, Medusa found and arrested another group of pirates who had recently attacked a British barque. Medusa's commander sent a report back to Berlin requesting the permanent stationing of gunboats in the region to help combat the pirates, and as a result, Hertha was dispatched to join his ship. [8]

Medusa remained in Hong Kong through the end of January 1870, at which point she went to Bangkok, Siam, where she participated in ceremonies commemorating the death of the King of Siam, Mongkut. She also helped mediate a dispute over the sinking of a German merchant vessel in the Mekong River. On 10 April, Medusa left Bangkok and stopped in Saigon on the way back to Hong Kong; the ship had suffered a serious accident with her engine, forcing her to stop in the port for repairs. A French merchant vessel carried a badly injured crewman from Medusa back to Toulon, France. The engine could not be repaired in Saigon, so Medusa departed for Yokohama, traveling mostly by sail. She arrived there on 23 July, where she met Hertha. While there, Medusa celebrated "Napoleon Day", celebrating the anniversary of Napoleon's birth on 15 August, with a French ironclad in the port, neither vessel being aware that the Franco-Prussian War had broken out a month before. Shortly thereafter, a United States steamship arrived with news of the state of war, and the French East Asia Squadron arrived to blockade the German ship in port. Although it prevented Medusa from taking offensive measures against French shipping, the blockade tied down the French squadron and allowed German vessels to largely escape being attacked. [9]

During this time the ship's engine was repaired, and she remained in the port until after the war ended, departing Yokohama on in mid-April 1871 after having received the order to return to the now-unified Germany on the second of the month. She steamed south, crossed the Indian Ocean, and then after rounding South Africa, turned north through the Atlantic and finally arrived in Kiel on 26 August. There, she received a thorough inspection before being decommissioned on 10 October; since the Kaiserliche Werft (Imperial Shipyard) in Kiel was not yet ready to repair the ship, she was moved to Danzig in August 1872, where she underwent a thorough overhaul and was converted for use as a training ship for Schiffsjungen (apprentice seamen). [10]

Later career

Medusa was recommissioned on 15 March 1875 in Kiel, where she embarked a contingent of Schiffsjungen. She went on a short training cruise in the Baltic, visiting ports in Norway and Sweden. At the end of August, she embarked on a longer training cruise to South America and the West Indies; the first stops on the cruise included Santos, Brazil and Montevideo, Uruguay. Medusa then steamed north to Barbados, where she arrived on 9 January 1876. While there, she received a secret order from the Kaiserliche Admiralität (Imperial Admiralty). Under the pretext of a search for deserters, Medusa was to leave the West Indies for Lisbon, Portugal. This move would bring her closer to the Mediterranean without openly signaling Germany's intention to respond to uprisings against Ottoman rule in the Balkans. While en route to Lisbon, the ship's crew conducted intensive weapons training to be prepared for hostilities if the use of force proved to be necessary. [11]

The ship arrived in Lisbon in mid-February, and on 16 March, Medusa was ordered to leave Lisbon and proceed to Messina in Sicily, where she received further orders to proceed to Salonika in what was then the Ottoman Empire. There, the French and German consuls had been murdered by the local Ottomans. On arriving there on 15 May, Medusa joined an international fleet that eventually included twenty-nine warships; Medusa was initially the only German vessel in the fleet. Her commander and a detachment from the crew went ashore to participate in the funeral for the consuls, after which the captain negotiated with the Ottoman government in Salonika for an indemnity for the murders. Additional German warships arrived in the area, and on 25 June, the armored training squadron with its flagship Kaiser reached the city, allowing Medusa to be released to return to training duties in mid-July. The rest of the cruise was conducted in the Mediterranean, and on 21 September, she arrived in Kiel, where she was decommissioned nine days later. [11]

Medusa returned to service on 4 April 1877 for another year's training program. From April to early July she cruised in the Baltic, which included visits to Swedish ports, before she began preparations for the overseas cruise. On 27 July, she embarked on the voyage, which again went to South and Central American waters. Her tour extended as far south as Rio de Janeiro, and as far north as Saint Thomas in the Danish West Indies, where she stayed from 6 January to 16 February 1878. Here, she received orders to travel to Nicaragua to join the frigate Elisabeth; Medusa went to Colón, Panama, where an officer from the ship, Unterleutnant zur See (Sublieutenant at Sea) Theodor Harms went ashore to travel overland to investigate the military situation in Nicaragua. Medusa then went to San Juan del Norte, Nicaragua on 16 April, but she made no intervention in the country, and instead began her voyage back to Germany, stopping in several ports in the United States on the way back. Medusa arrived in Kiel on 15 September and was decommissioned there on 28 September. [11]

For the last time, Medusa was commissioned on 1 April 1879 for another training program. In May and June, she conducted a cruise in the Baltic, as was the standard routine. Her voyage into the Atlantic began on 15 July, and this year, she visited numerous ports along the eastern coasts of North and South America, as far north as Halifax, Canada, and as far south as Bahía Blanca, Argentina. Other stops included the Antilles islands, La Guaira and Puerto Cabello, Venezuela, Norfolk, United States in May 1880; her last stop was in Halifax from mid-June to mid-July, after which she crossed the Atlantic and arrived back in Kiel on 10 September. On 30 September, the ship was inspected in Kiel and it was determined that further use would require a thorough overhaul, and so instead she was taken to Danzig where she was decommissioned and stricken from the naval register on 5 April 1881. She was used as a hulk until 1891, when she was sold for scrap and broken up. [11]

Notes

  1. Sondhaus, pp. 63, 66.
  2. 1 2 3 4 Gröner, p. 85.
  3. 1 2 Lyon, p. 250.
  4. 1 2 Hildebrand, Röhr, & Steinmetz, p. 63.
  5. Dodson, p. 19.
  6. Hildebrand, Röhr, & Steinmetz, pp. 63–64.
  7. 1 2 3 Hildebrand, Röhr, & Steinmetz, p. 64.
  8. Hildebrand, Röhr, & Steinmetz, pp. 64–65.
  9. Hildebrand, Röhr, & Steinmetz, p. 65.
  10. Hildebrand, Röhr, & Steinmetz, pp. 65–66.
  11. 1 2 3 4 Hildebrand, Röhr, & Steinmetz, p. 66.

Related Research Articles

SMS <i>Zähringen</i> Battleship of the German Imperial Navy

SMS Zähringen was the third Wittelsbach-class pre-dreadnought battleship of the German Imperial Navy. Laid down in 1899 at the Germaniawerft shipyard in Kiel, she was launched on 12 June 1901 and commissioned on 25 October 1902. Her sisters were Wittelsbach, Wettin, Schwaben and Mecklenburg; they were the first capital ships built under the Navy Law of 1898, brought about by Admiral Alfred von Tirpitz. The ship, named for the former royal House of Zähringen, was armed with a main battery of four 24 cm (9.4 in) guns and had a top speed of 18 knots.

SMS <i>Gneisenau</i> (1879) Screw corvette of the German Imperial Navy

SMS Gneisenau was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian Field Marshal August von Gneisenau. She was the fifth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Gneisenau was laid down in June 1877, launched in September 1879, and was commissioned into the fleet in October 1880. She was armed with a battery of fourteen 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Moltke</i> (1877) Screw corvette of the German Imperial Navy

SMS Moltke was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian Field Marshal Helmuth von Moltke the Elder. She was the fourth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Moltke was laid down in July 1875, launched in October 1877, and was commissioned into the fleet in April 1878. She was armed with a battery of ten 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Hansa</i> (1898) Protected cruiser of the German Imperial Navy

SMS Hansa was a protected cruiser of the Victoria Louise-class cruiser, built for the German Imperial Navy in the 1890s, along with her sister ships Victoria Louise, Hertha, Vineta, and Freya. Hansa was laid down at the AG Vulcan shipyard in Stettin in 1896, launched in March 1898, and commissioned into the Navy in April 1899. The ship was armed with a battery of two 21 cm guns and eight 15 cm guns and had a top speed of 19 knots.

SMS <i>Wettin</i> Battleship of the German Imperial Navy

SMS Wettin was a pre-dreadnought battleship of the Wittelsbach class of the German Kaiserliche Marine. She was built by Schichau Seebeckwerft in Danzig. Wettin was laid down in October 1899, and was completed October 1902. She and her sister ships—Wittelsbach, Zähringen, Schwaben and Mecklenburg—were the first capital ships built under the Navy Law of 1898. Wettin was armed with a main battery of four 24 cm (9.4 in) guns and had a top speed of 18 knots.

SMS <i>Hertha</i> Protected cruiser of the German Imperial Navy

SMS Hertha was a protected cruiser of the Victoria Louise class, built for the German Imperial Navy in the 1890s. Hertha was laid down at the AG Vulcan shipyard in 1895, launched in April 1897, and commissioned into the Navy in July 1898. The ship was armed with a battery of two 21 cm guns and eight 15 cm guns and had a top speed of 19 knots.

SMS <i>Kronprinz</i> (1867) Armored frigate of the German Imperial Navy

SMS Kronprinz  was a unique German ironclad warship built for the Prussian Navy in 1866–1867. Kronprinz was laid down in 1866 at the Samuda Brothers shipyard at Cubitt Town in London. She was launched in May 1867 and commissioned into the Prussian Navy that September. The ship was the fourth ironclad ordered by the Prussian Navy, after Arminius, Prinz Adalbert, and Friedrich Carl, though she entered service before Friedrich Carl. Kronprinz was built as an armored frigate, armed with a main battery of sixteen 21 cm (8.3 in) guns; several smaller guns were added later in her career.

SMS <i>Stein</i> Screw corvette of the German Imperial Navy

SMS Stein was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian statesman Heinrich Friedrich Karl vom und zum Stein. She was the sixth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Stein was laid down in 1878, launched in September 1879, and was commissioned into the fleet in October 1880. She was armed with a battery of twelve 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Cyclop</i> (1860) Gunboat of the Prussian and German Imperial Navy

SMS Cyclop was a Camäleon-class gunboat of the Prussian Navy that was launched in 1860. A small vessel, armed with only three light guns, Cyclop served during the three wars of German unification; during the first, the Second Schleswig War on 1864, she guarded the Prussian coastline but saw no action. She supported the army's campaign against the Kingdom of Hanover during the Austro-Prussian War of 1866, and she defended the Elbe for the duration of the Franco-Prussian War of 1870–1871, but again took part in no battles. Badly deteriorated by 1872, she was stricken from the naval register in March that year and reconstructed into an iron-hulled gunboat. Recommissioned in 1875, she thereafter served abroad in the German colonial empire before being stricken again in 1888. She was thereafter used as a storage hulk before ultimately being broken up for scrap after 1914.

SMS <i>Delphin</i> Gunboat of the Prussian and German Imperial Navy

SMS Delphin was a Camäleon-class gunboat of the Prussian Navy that was launched in 1860. A small vessel, armed with only three light guns, Delphin served during the Second Schleswig War of 1864 and the Austro-Prussian War of 1866, part of the conflicts that unified Germany. The ship was present at, but was only lightly engaged in the Battle of Jasmund during the Second Schleswig War. The ship spent much of the rest of her career in the Mediterranean Sea, going on three lengthy deployments there in 1865–1866, 1867–1870, and 1871–1873. During the last tour, she took part in operations off the coast of Spain with an Anglo-German squadron during the Third Carlist War, where she helped to suppress forces rebelling against the Spanish government. For the rest of the 1870s, she served as a survey vessel in the North and Baltic Seas before being decommissioned in August 1881, stricken from the naval register the following month, and subsequently broken up for scrap.

SMS <i>Ariadne</i> (1871) Screw corvette of the Prussian and German Imperial Navy

SMS Ariadne was a steam corvette of the German Kaiserliche Marine. She was the lead ship of the Ariadne class, which included two other ships, Luise and Freya. Ordered as part of a naval expansion program after the Austro-Prussian War, Ariadne was laid down in September 1868, launched in July 1871, and was commissioned in November 1872. Ariadne was a small vessel, armed with a battery of just eight guns.

SMS <i>Luise</i> Screw corvette of the Prussian and German Imperial Navy

SMS Luise was a steam corvette of the German Kaiserliche Marine. She was the second member of the Ariadne class, which included two other ships, Ariadne and Freya. Ordered as part of a large naval expansion program after the Austro-Prussian War, she was laid down in 1871 during the Franco-Prussian War. She was launched in December 1872 and completed in June 1874. Luise was a small vessel, armed with a battery of just eight guns.

SMS <i>Freya</i> (1874) Screw corvette of the Prussian and German Imperial Navy

SMS Freya was a steam corvette of the German Kaiserliche Marine. She was the third member of the Ariadne class, which included two other ships, Ariadne and Luise. Ordered as part of a large naval expansion program after the Austro-Prussian War, she was laid down in 1872 after the Franco-Prussian War. She was launched in December 1874 and completed in October 1876. Freya was built to a different design than her sisters, being longer and carrying a heavier battery of twelve guns.

SMS <i>Augusta</i> Screw corvette of the Prussian and German Imperial Navy

SMS Augusta was a wooden steam corvette built in the 1860s, the lead ship of the Augusta class. She had one sister ship, Victoria; the ships were armed with a battery of fourteen guns. Augusta was laid down in 1863 at the Arman Brothers shipyard in Bordeaux, France, and was launched in early 1864. Originally ordered by the Confederate States Navy, her delivery was blocked by the French Emperor Napoleon III, and she was instead sold to the Prussian Navy in May 1864. The Prussians had been in search of vessels to strengthen their fleet before and during the Second Schleswig War against Denmark, but Augusta arrived too late to see action in the conflict.

SMS <i>Victoria</i> Screw corvette of the Prussian and German Imperial Navy

SMS Victoria was the second and final member of the Augusta class of steam corvettes built for the Prussian Navy in the 1860s. She had one sister ship, Augusta; the ships were armed with a battery of fourteen guns. Victoria was laid down in 1863 at the Arman Brothers shipyard in Bordeaux, France, and was launched in early 1864. Originally ordered by the Confederate States Navy, her delivery was blocked by the French Emperor Napoleon III, and she was instead sold to the Prussian Navy in May 1864. The Prussians had been in search of vessels to strengthen their fleet before and during the Second Schleswig War against Denmark, but Victoria arrived too late to see action in the conflict.

SMS <i>Nymphe</i> (1863) Screw corvette of the Prussian and German Imperial Navy

SMS Nymphe was the lead ship of the Nymphe class of steam corvettes, the first ship of that type to be built for the Prussian Navy. She had one sister ship, Medusa, and the vessels were wooden-hulled ships armed with a battery of sixteen guns. She was ordered as part of a naval expansion program to counter the Danish Navy over the disputed ownership of Schleswig and Holstein. Nymphe was laid down in January 1862, was launched in April 1863, and was completed in October that year.

<i>Nymphe</i>-class corvette Screw corvette of the Prussian and German Imperial Navy

The Nymphe class of screw corvettes were the first vessels of the type to be built for the Prussian Navy in the early 1860s. The class comprised two vessels, Nymphe and Medusa. The ships were laid down in early 1862, and Nymphe was completed by late 1863, but work on Medusa proceeded slower, owing to budgetary disputes with the Prussian parliament and a desire to use experience in building Nymphe during the former's construction. The ships were built as part of a naval expansion program aimed at countering the powerful Danish Navy in the context of the disputed ownership of Schleswig and Holstein. The ships were armed with a battery of sixteen guns, and were capable of a top speed of 12 knots under steam power. All of the material used in their construction was domestically produced, apart from the propulsion system, which was imported from Great Britain.

SMS <i>Preussischer Adler</i> Aviso of the Prussian and German Imperial Navy

SMS Preussischer Adler was a paddle steamer originally built in the mid-1840s for use on a packet route between the Kingdom of Prussia and the Russian Empire in the Baltic Sea. She was requisitioned by the Prussian Navy during the First Schleswig War in 1848 and converted into an aviso, the first vessel of the type commissioned by Prussia. During the war, she took part in an inconclusive action with the Danish brig St. Croix, the first naval battle of the Prussian fleet. After the war, she was disarmed and returned to her commercial role, operating uneventfully on the Stettin–St. Petersburg route until 1862, when the expansion of the Prussian Eastern Railway had rendered the maritime route superfluous. The ship was purchased by the Prussian Navy that year and rearmed, once again as an aviso.

SMS <i>Grille</i> Aviso of the Prussian and German Imperial Navy

SMS Grille was an aviso of the Prussian Navy built in France in the mid-1850s as part of a naval expansion program directed by Prince Adalbert of Prussia, who saw the need for a stronger fleet. She was authorized in 1855 in the aftermath of the First Schleswig War, which had demonstrated the weakness of the Prussian fleet. Grille was the first screw propeller-driven steamship to be built for Prussia; all earlier steam-powered vessels had been paddle steamers.

References

Further reading