Ariadne-class corvette

Last updated

Korvette SMS Ariadne 1871 (IZ 57-288) - no text.jpg
Illustration of Ariadne, c. 1871
Class overview
NameAriadne class
Builders Kaiserliche Werft , Danzig
Preceded by Augusta-class corvette
Succeeded by Leipzig-class corvette
Built1868–1876
In service1872–1896
Completed3
Scrapped3
General characteristics
Type Screw corvette
Displacement Full load: 2,072 metric tons (2,039 long tons)
Length68.16 meters (223 ft 7 in) (loa)
Beam10.8 m (35 ft 5 in)
Draft4.8 m (15 ft 9 in)
Installed power
Propulsion
Sail plan Full-rigged ship
Speed14 knots (26 km/h; 16 mph)
Range1,340 nautical miles (2,480 km; 1,540 mi) at 10 kn (19 km/h; 12 mph)
Crew
  • 13 officers
  • 220 sailors
Armament

The Ariadne class was a group of three screw corvettes of the North German Federal Navy and Imperial Navy, built in the 1860s and 1870s. The class comprised three ships: Ariadne, Luise, and Freya. The first two vessels were identical, but Freya was built to a modified design with a longer hull, which allowed her to carry more powerful engines and additional coal for the boilers. The ships were ordered as part of a naval construction program directed at strengthening the North German Federal Navy, though by the time they entered service, all of the German states had united into the German Empire. They were intended to serve on extended cruises abroad, protecting German interests overseas. Their primary armament consisted of six or eight 15 cm (5.9 in) guns, and they were fitted with full ship rigs to supplement their steam engines on long voyages abroad.

Contents

All three of the ships served extensively on overseas deployments throughout the 1870s and early 1880s, primarily in South America, the Mediterranean Sea, and East Asia. On these voyages, the ships and their captains performed a number of duties, including protecting German nationals during periods of unrest or open warfare in various countries, negotiating trade agreements with numerous governments, and combating piracy. They were also tasked with conducting surveys to improve navigational charts and scientific experiments.

In the early to mid-1880s, all three of the ships were converted into training ships for apprentice seamen, and they went on training cruises over the course of the rest of the decade. These frequently went to the West Indies, where they were used to show the flag. While on one such training cruise in 1883, Freya helped to protect civilians in Haiti during a period of unrest on the island. All three ships were decommissioned by 1892, with Ariadne being immediately scrapped. Luise survived as a hulk and torpedo test ship until 1896 when she too was sold for scrap, and Freya simply saw no further use between her decommissioning in 1884 and her disposal in 1896.

Design

In 1867, the North German Admiralty under the direction of Konteradmiral (Rear Admiral) Eduard von Jachmann formulated a new fleet plan, an expansion program aimed at strengthening the North German Federal Navy in the wake of the Austro-Prussian War. The plan called for a total of twenty screw corvettes, which were intended to be used to protect German economic interests abroad. At the time, German commercial interests began to expand to overseas markets in Asia and the Pacific, which required long-range cruising warships, particularly as other European powers started to exclude German businesses from activity abroad. [1] The Admiralty issued an order on 15 February 1868 to begin construction of a new class of corvettes; at the same time, the contract for the first ship, to be named Ariadne, was awarded to the Königliche Werft (Royal Shipyard) in Danzig. [2] Design work on the class was completed in 1869, the same year construction began on the first vessel. Freya was the last wooden-hulled vessel of the German fleet. She was built to a slightly different design, essentially having a lengthened hull, with the increased space being used to house more powerful machinery and additional coal storage for an extended cruising radius. [3] [4] The three vessels were the first cruising ships of the German fleet to carry breech-loading guns. [5]

General characteristics

The Ariadne-class ships were 65.8 meters (215 ft 11 in) long at the waterline and 68.16 m (223 ft 7 in) long overall. They had a beam of 10.8 m (35 ft 5 in) and a draft of 4.8 m (15 ft 9 in) forward and 5.7 m (18 ft 8 in) aft. They displaced 1,692 metric tons (1,665 long tons ) as designed and up to 2,072 t (2,039 long tons) at full load. The ships' hulls were constructed with transverse timber frames, with the outer hull being carvel built. They were sheathed with copper to protect the wood from biofouling on long-distance cruises, where regular maintenance could not be performed. Freya had four watertight compartments, while the earlier two ships had none. [3] [4]

Over the course of their careers, the ships' crews varied between 13 and 14 officers and 220 to 234 enlisted men. Each ship carried a number of small boats, including two pinnaces, two yawls, and three dinghies. The ships were excellent sea boats, but they suffered from severe weather helm, they sailed badly, and they were not maneuverable vessels under sail. Freya was particularly difficult to steer. The ships' propeller did not rotate freely from the shaft at low speed, and so it had a significant braking effect under sail. Despite their characteristics under sail, they maneuvered quite well under steam. [3]

Machinery

Watercolor of Luise James Scott Maxwell - German Corvette 'Luise' 1872 400115946.jpg
Watercolor of Luise

The ships were powered by a single 3-cylinder marine steam engine that drove one 4-bladed screw propeller. The first two ships' screws were 4.56 m (15 ft) in diameter, and Freya's was 5.34 m (17 ft 6 in) wide. Steam was provided by four coal-fired fire-tube boilers, which were ducted into a single, retractable funnel. As built, the Ariadne-class ships were equipped with a full ship rig, but this was later reduced to a barque rig in all three vessels. Steering was controlled with a single rudder. [3] [4]

The first two ships were rated at a top speed of 14 knots (26 km/h; 16 mph) from 2,100 metric horsepower (2,100  ihp ), but they both slightly exceeded those figures on speed trials, both making 14.1 knots (26.1 km/h; 16.2 mph) at 2,260 to 2,392 PS (2,229 to 2,359 ihp). Freya was designed to have a speed of 14.5 knots (26.9 km/h; 16.7 mph) from 2,400 PS (2,400 ihp), but she reached a speed of 15.2 knots (28.2 km/h; 17.5 mph) from 2,801 PS (2,763 ihp) on trials. Ariadne and Luise could carry 168 t (165 long tons) of coal, while Freya could carry 264 t (260 long tons). The first two ships had a cruising radius of 1,340 nautical miles (2,480 km; 1,540 mi) at a speed of 10 knots (19 km/h; 12 mph), which reduced to 630 nmi (1,170 km; 720 mi) at a speed of 13 knots (24 km/h; 15 mph). Freya had significantly more endurance, owing to her increased coal supply, being capable of steaming for 2,500 nmi (4,600 km; 2,900 mi) at 10 knots and 1,060 nmi (1,960 km; 1,220 mi) at 15 knots (28 km/h; 17 mph). [3]

Armament

Ariadne and Luise were armed with a battery of six 15 cm RK L/22 breech-loading guns, which had a length of 22-calibers. There were also two 12 cm (4.7 in) L/23 guns, all on the broadside. Of the 15 cm guns four were on sliding carriages for changing gunport. The guns were supplied with 400 rounds and 200 rounds, respectively. In 1882, they had four 37 mm (1.5 in) Hotchkiss revolver cannon installed. Freya, instead, had eight and later seven 15 cm 22-cal. guns with 760 shells and four 17 cm (6.7 in) 25-cal. guns, though the latter were removed early in her career; these were also broadside guns. In 1881, she also received six 37 mm Hotchkiss revolver cannon. [3] [4]

Ships

Construction data
ShipBuilder [3] Laid down [3] Launched [3] Completed [3]
Ariadne Königliche Werft , Danzig 186821 July 187123 November 1872
Luise Kaiserliche Werft, [6] Danzig187116 December 18724 June 1874
Freya 187429 December 18741 October 1876
ThusneldaContract reordered as Leipzig

Service history

Illustration of the Central America Squadron, with Leipzig
, Elisabeth
, and Ariadne
from left to right Das Zentralamerikanische Geschwader vor Corinto Marz 1878 Von links SMS Leipzig Elisabeth Ariadne Zeichnung von H Penner Illustrirte Zeitung 13 Juli 1878.jpg
Illustration of the Central America Squadron, with Leipzig, Elisabeth, and Ariadne from left to right

Ariadne

Ariadne went on four major overseas cruises during her career. The first, from late 1874 to late 1876, saw the ship visit Chinese waters where she protected German shipping from pirate attacks, which were a common problem in the region in the 1870s. During the second, which lasted from late 1877 to late 1879, Ariadne operated off South America and the central Pacific Ocean. While in South American waters, she visited several countries in the area to show the flag. In the central Pacific, her captain negotiated a series of trade agreements with local chiefs on various islands in Melanesia, Micronesia, and Polynesia. In 1880–1881, the ship went to South American waters to protect German interests during the War of the Pacific between Peru, Chile, and Bolivia; her operations during this period were largely confined to the cities of Ancón and Lima, Peru. In 1884–1885, she operated off West Africa, where she negotiated the acquisition of a protectorate in what is now Guinea. [7]

The rest of Ariadne's career was uneventful. After returning to Germany in 1885, Ariadne was reassigned as a training ship for apprentice seamen, a role she performed for the next five years. During this period, she went on training cruises to the Caribbean Sea and visited numerous foreign ports, conducted training in the Baltic Sea, and participated in fleet exercises in German waters. Ariadne also participated in ceremonial activities, including the beginning of construction of the Kaiser Wilhelm Canal in 1887 and a naval review held during a visit from an Austro-Hungarian squadron in 1890. She was decommissioned in September 1890, stricken from the naval register in April 1891, and sold to ship breakers in October. [8]

Luise

Illustration of Luise
in heavy seas Hermann Penner - Luise - Illustrirte Zeitung 1873.jpg
Illustration of Luise in heavy seas

Luise went on two major overseas cruises early in her career, both to East Asian waters. The first lasted from 1875 and 1877; during the cruise, she visited Chinese ports to protect German interests and show the flag. She also conducted a hydrographic survey of the Yangtze river, and was damaged in an accidental collision with a British ironclad warship in Japan. The second lasted from 1878 to 1880 and saw similar activities, though during her time in the East Asia Squadron, she served as its flagship. During this deployment, she conducted deep-ocean temperature and salinity experiments and protected German nationals in Shanghai during unrest in the area. While on the way home, she attempted to negotiate a dispute between Germany and Madagascar, but a severe storm forced her to leave before a settlement could be reached in order to avoid being damaged. [9]

In 1881, after returning to Germany, Luise was converted into a training ship, and she served in this capacity for most of the rest of her career. She made several overseas cruises, visiting the Americas twice in 1881–1882 and 1885; during these cruises, she visited numerous ports in North, Central, and South America. In 1886, she participated in the British fleet review, where she represented Germany. The ship carried replacement crews to the gunboats stationed in German West Africa in 1886 and 1887. Luise was hulked in 1892 and used as a torpedo test ship in 1894–1896, before being stricken from the naval register in December 1896. She was sold for scrap the following year and broken up in Hamburg. [10]

Freya

Freya went on two major overseas cruises in the course of her fairly uneventful career. The first was from 1877 to 1879, and the second followed immediately thereafter from 1879 to 1881. On the first cruise, she went to the eastern Mediterranean Sea and toured various ports in Greece and the Ottoman Empire, and then proceeded to China as part of the East Asia Squadron. On the way back to Germany, she had a boiler explosion that killed four crewmen and badly burned several more. The second voyage began with a deployment to Chilean waters to protect German interests during the War of the Pacific, after which she returned to Chinese waters. There, she conducted hydrographic surveys and attempted to suppress piracy; on the return to Germany her captain died from typhoid fever. [11]

After returning to Germany in 1881, she was converted into a training ship and returned to service in that capacity in 1883. She went on only one major training cruise, which lasted from mid-1883 to late 1884. During the voyage she toured ports in the Americas and helped to protect civilians during a period of civil unrest in Haiti in late 1883. She was thereafter decommissioned and remained out of service for the rest of her existence, seeing no further use. She was stricken from the naval register in 1896 and sold to ship breakers the following year. [12]

Notes

  1. Sondhaus, pp. 109, 116–117.
  2. Hildebrand, Röhr, & Steinmetz Vol. 1, p. 253.
  3. 1 2 3 4 5 6 7 8 9 10 Gröner, p. 87.
  4. 1 2 3 4 Lyon, p. 251.
  5. Dodson & Nottelmann, p. 28.
  6. The Königliche Werft (Royal Shipyard) was renamed the Kaiserliche Werft (Imperial Shipyard) after the proclamation of the German Empire in January 1871 during the Franco-Prussian War.
  7. Hildebrand, Röhr, & Steinmetz Vol. 1, pp. 253–257.
  8. Hildebrand, Röhr, & Steinmetz Vol. 1, p. 257.
  9. Hildebrand, Röhr, & Steinmetz Vol. 6, pp. 27–28.
  10. Hildebrand, Röhr, & Steinmetz Vol. 6, pp. 28–29.
  11. Hildebrand, Röhr, & Steinmetz Vol. 3, pp. 98–99.
  12. Hildebrand, Röhr, & Steinmetz Vol. 6, pp. 99–100.

Related Research Articles

SMS <i>Ariadne</i> Light cruiser of the German Imperial Navy

SMS Ariadne was the fifth member of the ten-ship Gazelle class of light cruisers that were built for the German Kaiserliche Marine in the late 1890s and early 1900s. The Gazelle class was the culmination of earlier unprotected cruiser and aviso designs, combining the best aspects of both types in what became the progenitor of all future light cruisers of the Imperial fleet. Built to be able to serve with the main German fleet and as a colonial cruiser, she was armed with a battery of ten 10.5 cm (4.1 in) guns and a top speed of 21.5 knots.

SMS <i>Arcona</i> (1902) Light cruiser of the German Imperial Navy

SMS Arcona was the ninth member of the ten-ship Gazelle class of light cruisers that were built for the German Kaiserliche Marine in the late 1890s and early 1900s. The Gazelle class was the culmination of earlier unprotected cruiser and aviso designs, combining the best aspects of both types in what became the progenitor of all future light cruisers of the Imperial fleet. Built to be able to serve with the main German fleet and as a colonial cruiser, she was armed with a battery of ten 10.5 cm (4.1 in) guns and a top speed of 21.5 knots. Arcona was a modified version of the basic Gazelle design, with improved armor and additional coal storage for a longer cruising range.

<i>Deutschland</i>-class battleship Battleship class of the German Imperial Navy

The Deutschland class was a group of five pre-dreadnought battleships built for the German Kaiserliche Marine, the last vessels of that type to be built in Germany. The class comprised Deutschland, the lead ship, Hannover, Pommern, Schlesien, and Schleswig-Holstein. The ships closely resembled those of the preceding Braunschweig class, but with stronger armor and a rearranged secondary battery. Built between 1903 and 1908, they were completed after the launch of the revolutionary British all-big-gun battleship HMS Dreadnought in 1906. As a result, they were obsolescent before entering service. The ships nevertheless saw extensive service in the High Seas Fleet, Germany's primary naval formation, through the late 1900s and early 1910s, when they were used for training, which included overseas cruises.

SMS <i>Freya</i> Protected cruiser of the German Imperial Navy

SMS Freya was a protected cruiser of the Victoria Louise class, built for the German Imperial Navy in the 1890s, along with her sister ships Victoria Louise, Hertha, Vineta, and Hansa. Freya was laid down at the Imperial Dockyard in Danzig in 1895, launched in April 1897, and commissioned into the Navy in October 1898. The ship was armed with a battery of two 21 cm guns and eight 15 cm guns and had a top speed of 19 knots.

SMS <i>Danzig</i> Light cruiser of the German Imperial Navy

SMS Danzig was a light cruiser of the Imperial German Navy. Named for the city of Danzig, she was the seventh and last ship of the Bremen class. She was begun by the Imperial Dockyard in her namesake city in 1904, launched on 23 September 1905 and commissioned on 1 December 1907. Armed with a main battery of ten 10.5 cm (4.1 in) guns and two 45 cm (18 in) torpedo tubes, Danzig was capable of a top speed of 22 knots.

<i>Bismarck</i>-class corvette Screw corvette class of the German Imperial Navy

The Bismarck-class corvettes were a class of six corvettes built for the German Kaiserliche Marine in the 1870s. The six ships were Bismarck, Blücher, Stosch, Moltke, Gneisenau, and Stein. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and they were designed to serve as fleet scouts and on extended tours in Germany's colonial empire. The ships were armed with a battery of between ten and sixteen 15 cm (5.9 in) guns and they had a full ship rig to supplement their steam engine on long cruises abroad. One ship, Blücher, was converted into a torpedo testing and training ship shortly after she was completed, having her guns replaced with a variety of torpedo launchers.

<i>Blitz</i>-class aviso Aviso class of the German Imperial Navy

The Blitz class was a pair of avisos built for the German Kaiserliche Marine in the early 1880s. The ships, Blitz and Pfeil, were the first steel-hulled ships of any kind built by the German Navy, were among the first torpedo cruiser type warships in the world, and were the progenitors of the later light cruisers of the Gazelle class. They were armed with a 12.5 cm (4.9 in) gun and one 35 cm (13.8 in) torpedo tube as their principal armament, and were capable of a top speed in excess of 15 knots. They were very successful warships, remaining in active service for more than three decades.

<i>Schwalbe</i>-class cruiser Unprotected cruiser class of the German Imperial Navy

The Schwalbe class of unprotected cruisers were the first ships of the type built for the German Kaiserliche Marine. The class comprised two ships, Schwalbe, the lead ship, and Sperber. They were designed for service in Germany's recently acquired colonial empire, and were built between 1886 and 1889. They were armed with a main battery of eight 10.5-centimeter (4.1 in) guns and could steam at a speed of 13.5 knots.

SMS <i>Charlotte</i> Screw corvette of the German Imperial Navy

SMS Charlotte was a German screw corvette built for the Kaiserliche Marine in the 1880s, being laid down in April 1883, launched in September 1885, and commissioned in November 1886. The only vessel of her class, Charlotte was the last sailing warship built for the German navy. She was armed with a battery of eighteen 15 cm (5.9 in) guns.

<i>Camäleon</i>-class gunboat Gunboat class of the Prussian and German Imperial Navy

The Camäleon class was a group of gunboats built for the Prussian Navy. Eight ships comprised the class: Camäleon, Comet, Cyclop, Delphin, Blitz, Basilisk, Meteor, and Drache. The vessels were armed with a battery of one 15 cm (5.9 in) gun and two 12 cm (4.7 in) guns. In 1865, the ships then in service had their 15 cm gun replaced with a 21 cm (8.3 in) gun; Meteor and Drache, not yet completed, entered service with that gun. The vessels saw action during the wars of German unification, with Comet taking part in the Battle of Jasmund and Blitz and Basilisk present during the Battle of Heligoland, both during the Second Schleswig War in 1864. Several of the ships served in the North Sea during the Austro-Prussian War, where some of them supported operations against the Kingdom of Hanover. During the Franco-Prussian War, Meteor battled the French aviso Bouvet in the Battle of Havana in 1870; the other members of the class were deployed on coastal defense assignments.

<i>Carola</i>-class corvette Screw corvette class of the German Imperial Navy

The Carola class was a group of six screw corvettes built by the German Kaiserliche Marine in the late 1870s and 1880s. The class comprised Carola, the lead ship, Olga, Marie, Sophie, Alexandrine, and Arcona. They were ordered to replace older sailing vessels that were no longer sufficient to protect German interests around the world. Intended for service in the German colonial empire, the ships were designed with a combination of steam and sail power for extended cruising range, and they were equipped with a battery of ten 15-centimeter (5.9 in) guns. Relying primarily on sail power for their long-range deployments, the ships were obsolescent before construction began.

SMS <i>Nixe</i> Screw corvette of the German Imperial Navy

SMS Nixe was a screw corvette built for the German Kaiserliche Marine in the 1880s. She was laid down in August 1883, launched in July 1885, and commissioned into the fleet in April 1886. Hopelessly out of date even by the time she was ordered in 1882 and possessing insufficient gun power or speed, she was nevertheless completed as designed. In addition to those shortcomings, she proved to be difficult to handle in service and was particularly affected by wind.

SMS <i>Ariadne</i> (1871) Screw corvette of the Prussian and German Imperial Navy

SMS Ariadne was a steam corvette of the German Kaiserliche Marine. She was the lead ship of the Ariadne class, which included two other ships, Luise and Freya. Ordered as part of a naval expansion program after the Austro-Prussian War, Ariadne was laid down in September 1868, launched in July 1871, and was commissioned in November 1872. Ariadne was a small vessel, armed with a battery of just eight guns.

SMS <i>Luise</i> Screw corvette of the Prussian and German Imperial Navy

SMS Luise was a steam corvette of the German Kaiserliche Marine. She was the second member of the Ariadne class, which included two other ships, Ariadne and Freya. Ordered as part of a large naval expansion program after the Austro-Prussian War, she was laid down in 1871 during the Franco-Prussian War. She was launched in December 1872 and completed in June 1874. Luise was a small vessel, armed with a battery of just eight guns.

SMS <i>Freya</i> (1874) Screw corvette of the Prussian and German Imperial Navy

SMS Freya was a steam corvette of the German Kaiserliche Marine. She was the third member of the Ariadne class, which included two other ships, Ariadne and Luise. Ordered as part of a large naval expansion program after the Austro-Prussian War, she was laid down in 1872 after the Franco-Prussian War. She was launched in December 1874 and completed in October 1876. Freya was built to a different design than her sisters, being longer and carrying a heavier battery of twelve guns.

SMS <i>Prinz Adalbert</i> (1876) Screw corvette of the German Imperial Navy

SMS Prinz Adalbert was a steam corvette of the German Kaiserliche Marine, the second and final member of the Leipzig class. She was laid down in 1875 at the AG Vulcan shipyard in Stettin, was launched in June 1876, and was commissioned into the fleet in August 1877. Originally named Sedan after the Battle of Sedan of the Franco-Prussian War, she was renamed Prinz Adalbert to avoid antagonizing France in 1878, less than a decade after the battle.

<i>Leipzig</i>-class corvette Screw corvette class of the German Imperial Navy

The Leipzig class was a group of two screw corvettes built for the German Kaiserliche Marine in the 1870s. The two ships of the class were Leipzig and Prinz Adalbert; Prinz Adalbert was originally named Sedan after the Battle of Sedan, but was renamed shortly after entering service to avoid angering France. They were based on the earlier corvette Freya, but were significantly larger, carried a stronger armament, and unlike the wooden-hulled Ariadne-class corvettes, adopted iron construction, making them the first corvettes of the German fleet to be built with iron. Originally intended to serve abroad and with the fleet, British experiences during the Battle of Pacocha in 1877 convinced the German naval command that unarmored warships were useless against the fleets of ironclads being built by the European navies, and so Leipzig and Prinz Adalbert would be used only on foreign stations.

<i>Augusta</i>-class corvette Screw corvette class of the Prussian and German Imperial Navy

The Augusta class of screw corvettes were a pair of vessels acquired by the Prussian Navy in the 1860s. The class comprised two ships, Augusta and Victoria. The ships were originally secretly ordered by the Confederate States Navy in 1863 from Arman Brothers shipyard in Bordeaux, France, purportedly for the Japanese fleet. The ships, intended to be named Mississippi and Louisiana, were given the cover names Yeddo and Osaka in an attempt to hide their destination, but their delivery was blocked by the French Emperor Napoleon III in 1864. Both ships were sold to the Prussian Navy in May 1864, as the Prussians had been in search of vessels to strengthen their fleet before and during the Second Schleswig War against Denmark, though they entered service too late to see action in the conflict. The ships were intended to be used as blockade runners, but once they entered service they were too slow to be used in that capacity.

<i>Nymphe</i>-class corvette Screw corvette of the Prussian and German Imperial Navy

The Nymphe class of screw corvettes were the first vessels of the type to be built for the Prussian Navy in the early 1860s. The class comprised two vessels, Nymphe and Medusa. The ships were laid down in early 1862, and Nymphe was completed by late 1863, but work on Medusa proceeded slower, owing to budgetary disputes with the Prussian parliament and a desire to use experience in building Nymphe during the former's construction. The ships were built as part of a naval expansion program aimed at countering the powerful Danish Navy in the context of the disputed ownership of Schleswig and Holstein. The ships were armed with a battery of sixteen guns, and were capable of a top speed of 12 knots under steam power. All of the material used in their construction was domestically produced, apart from the propulsion system, which was imported from Great Britain.

References