SMS Luise

Last updated

James Scott Maxwell - German Corvette 'Luise' 1872 400115946.jpg
Luise, by James Scott Maxwell
History
NameLuise
Namesake Princess Louise of Prussia
Builder Kaiserliche Werft , Danzig
Laid down1871
Launched16 December 1872
Commissioned4 June 1874
Stricken19 December 1896
Fate Broken up, 1897
General characteristics
Class and type Ariadne-class corvette
Displacement Full load: 2,072 metric tons (2,039 long tons)
Length68.16 meters (223 ft 7 in) (loa)
Beam10.8 m (35 ft 5 in)
Draft4.8 m (15 ft 9 in)
Installed power
Propulsion
Sail plan Full-rigged ship
Speed14.1 knots (26.1 km/h; 16.2 mph)
Range1,340 nautical miles (2,480 km; 1,540 mi) at 10 kn (19 km/h; 12 mph)
Crew
  • 12 officers
  • 220 sailors
Armament
  • 6 × 15 cm (5.9 in) guns
  • 2 × 12 cm (4.7 in) guns

SMS Luise was a steam corvette of the German Kaiserliche Marine (Imperial Navy). She was the second member of the Ariadne class, which included two other ships, Ariadne and Freya. Ordered as part of a large naval expansion program after the Austro-Prussian War, she was laid down in 1871 during the Franco-Prussian War. She was launched in December 1872 and completed in June 1874. Luise was a small vessel, armed with a battery of just eight guns.

Contents

Luise went on two major overseas cruises early in her career, both to East Asian waters. The first lasted from 1875 and 1877; during the cruise, she visited Chinese ports to protect German interests and show the flag. The second lasted from 1878 to 1880 and saw similar activities, though during her time in the East Asia Squadron, she served as its flagship. While on the way home, she attempted to negotiate a dispute between Germany and Madagascar, but a severe storm forced her to leave before a settlement could be reached.

In 1881, Luise was converted into a training ship, and she served in this capacity for most of the rest of her career. She made several overseas cruises, visiting the Americas twice in 1881–1882 and 1885. The ship carried replacement crews to the gunboats stationed in German West Africa in 1886 and 1887. Luise was hulked in 1892 and used as a torpedo test ship in 1894–1896, before being stricken from the naval register in December 1896. She was sold for scrap the following year and broken up in Hamburg.

Design

The three Ariadne-class corvettes were ordered as part of the fleet plan of 1867, an expansion program aimed at strengthening the Prussian Navy in the wake of the Austro-Prussian War. The plan called for a total of twenty screw corvettes. [1] The design for Luise was prepared in 1869, [2] but work on the ship was delayed until 1871 by the outbreak of the Franco-Prussian War. [3]

Luise was 68.16 meters (223 ft 7 in) long overall, with a beam of 10.8 m (35 ft 5 in) and a draft of 4.8 m (15 ft 9 in) forward. She displaced 2,072 metric tons (2,039 long tons ) at full load. The ship's crew consisted of 12 officers and 220 enlisted men. She was powered by a single marine steam engine that drove one 4-bladed screw propeller, with steam provided by four coal-fired fire-tube boilers, which gave her a top speed of 14.1 knots (26.1 km/h; 16.2 mph) at 2,392 metric horsepower (2,359  ihp ). She had a cruising radius of 1,340 nautical miles (2,480 km; 1,540 mi) at a speed of 10 knots (19 km/h; 12 mph). As built, Luise was equipped with a full ship rig, but this was later reduced to a barque rig. [2] [4]

Luise was armed with a battery of six 15 cm (5.9 in) 22-caliber (cal.) breech-loading guns and two 12 cm (4.7 in) 23-cal. guns. In 1882, she had four 37 mm (1.5 in) Hotchkiss revolver cannon installed. [2] [4]

Service history

The keel for Luise, named for Princess Louise of Prussia, was laid down in 1871 at the Kaiserliche Werft (Imperial Shipyard) in Danzig. She was launched on 16 December 1872 without any celebration and she was commissioned into the fleet on 4 June 1874. She then began sea trials, which ended in mid-July, after which she was moved to Wilhelmshaven and decommissioned in late August. [2] [5]

First deployment abroad

German 1872 map of China, Japan, and Korea China (ostl. Theil), Korea und Japan im Massstab 1-7.500.000 LOC 2006629397.jpg
German 1872 map of China, Japan, and Korea

Luise was reactivated in early 1875 for training operations with the main fleet in German waters. She was ordered on a deployment abroad late in the year, which she began on 11 October. She left Wilhelmshaven on 26 October and sailed through the Atlantic Ocean to Rio de Janeiro, Brazil before rounding the Cape of Good Hope into the Indian Ocean. She arrived in Melbourne, Australia on 1 April 1876, where she was compelled to stay for two weeks, since a fever had broken out among the crew. From there, Luise sailed to Jolo, the main island of the Sulu Archipelago of the Philippines. In the capital of Jolo, she attempted to secure payment of a debt owed to a German merchant, but she was unable to do so, as the residents of the town had burned it to the ground and fled to the interior of the island during a revolt against the colonial Spanish government. [5]

Luise met with the East Asia Squadron in Hong Kong on 1 July and she relieved her sister ship Ariadne, which then began the voyage back to Germany. On 13 July, Luise sailed to Chefoo in company with the squadron flagship, the screw frigate Vineta, since the German ambassador feared there would be Chinese riots as a result of British activities in the area. By the end of September, the threat of unrest had passed, and so on 1 October, Luise was able to begin a tour of several Chinese ports. At the end of January 1877, Luise went to Shanghai to ensure that the Chinese authorities had dropped the tax on German imports in the port. She then steamed up the Yangtze to Wuhu to show the flag and conduct hydrographic surveys. Luise sailed to Nagasaki, Japan, after her work around Wuhu was completed. There, she underwent an overhaul; during this work, the British ironclad warship HMS Audacious accidentally collided with her, crushing three of her boats and wrecking one of the boat cranes. After repairs were completed, Luise received the order to return to Germany; she left Nagasaki on 7 May and arrived back in Wilhelmshaven on 1 September. At the beginning of 1878, she went into the shipyard to be modernized, which included a reduction of her sailing rig. [5]

Second deployment abroad

Luise was reactivated in late 1878 for another foreign cruise, and she left Germany on 3 December. This time, she passed through the Suez Canal on her way to East Asian waters. While on the way from Aden to Bombay on 26 January 1879, she collected deep-ocean temperature and salinity samples in conjunction with scientific expeditions conducted by the German frigate Gazelle and the British corvette HMS Challenger. Luise then stopped in Bombay and Calcutta, the first time the ports had been visited by a German warship. She proceeded on to Hong Kong, where she arrived in early May to replace her sister Freya. Shortly thereafter, the corvette Leipzig reached Hong Kong; her captain, Kapitän zur See (Captain at Sea) Carl Paschen, had been the senior officer of the East Asia Squadron by date of rank, but he was replaced in this position by Luise's commander. [6]

Beginning in June 1879, Luise toured Japanese ports, sometimes in company with the corvette Prinz Adalbert and in August she conducted additional deep-see tests in the Korea Strait. In March and April 1880, Luise had to go to Shanghai to protect German nationals against unrest in the city; she was joined in this task by the gunboats Cyclop and Wolf. The situation had calmed by 24 April, allowing Luise to return to Hong Kong, since she had received orders to return to Germany at the beginning of April. After making preparations for the voyage, she left Hong Kong on 3 July and sailed to Madagascar to complete a diplomatic mission on the way back to Germany. [7]

Anti-European sentiment was strong among the island's population in the context of French colonial ambitions, and they refused to recognize the German ambassador. Luise stopped in the main port at Tamatave, where Luise's captain and five officers met with Prime Minister Rainilaiarivony on 16 August. Negotiations were not possible with the government as a result of the approach of a very strong storm that forced Luise to leave the island immediately. She proceeded on to Simonstown to replenish her stock of coal before continuing on to Wilhelmshaven, where she arrived on 9 November and was decommissioned on 20 November. [7]

Training ship

Illustration of Luise
in heavy seas Hermann Penner - Luise - Illustrirte Zeitung 1873.jpg
Illustration of Luise in heavy seas

Luise was converted into a training ship for Schiffsjungen (apprentice seamen) in early 1881, and she entered service in this role on 15 April. From 18 May to the middle of June, she conducted a training cruise in the Baltic Sea, and on 19 June she began a voyage to North, Central, and South America. She visited a number of ports, including Halifax, Canada, and Georgetown, British Guiana. She arrived back in Kiel on 4 September 1882, where she joined the fleet training exercises that were being conducted in the Baltic. She was decommissioned for the year on 25 September. [7]

The ship had deteriorated in condition by this time, so in 1883 she was taken into the Kaiserliche Werft in Danzig for a thorough repair. This work lasted until February 1885, and on the 24th she was recommissioned to resume her training duties. Luise conducted a short set of trials outside Kiel before cruising in the Baltic starting on 11 May. The ship began another overseas cruise on 1 June, again to the Americas. On the way back from the tour, she stopped in Queenstown, Ireland, and then went to Cowes to represent Germany at a Royal Navy fleet review in 1886. She left Cowes on 10 August and visited Gravesend and Leith before arriving in Wilhelmshaven on 10 September. [7]

On arrival in Wilhelmshaven, Luise received orders to carry replacement crews to the gunboats that were stationed in German West Africa, Cyclop and Habicht. She sailed to Douala, Kamerun to transfer the new crews, and arrived back in Wilhelmshaven on 26 January 1887. She was then formally re-designated as a school ship. Luise moved to Kiel on 10 February, where her crew was reduced. On 5 April, she had her crew replenished to resume training duties. She was present during the celebration of the beginning of construction of the Kaiser Wilhelm Canal in Kiel. She went on further cruises in German waters until 9 September; six days later she was decommissioned and assigned to the I. Reserve. [8]

A month later on 15 October, Luise was reactivated to carry another set of replacement crews to the gunboats in West Africa. She reached Douala on 17 December, transferred the crews, and left ten days later, arriving back in Kiel on 18 February 1888. Two days later, she was again decommissioned and placed in the I. Reserve, which lasted until April, when she was recommissioned for another stint as a training ship. She cruised in the Baltic until 29 September, when she returned to Kiel for an overhaul. She spent the years 1890 and 1891 as a training ship; she also participated in those years' fleet maneuvers. [9] Luise was converted into a hulk in 1891 and based in Kiel, serving in that capacity until 19 December 1896, when she was stricken from the naval register. During this period, she was also used as a torpedo test ship from late 1894 to 16 April 1896. She was sold the following year and broken up in Hamburg. [2] [9]

Notes

  1. Sondhaus, p. 109.
  2. 1 2 3 4 5 Gröner, p. 87.
  3. Sondhaus, pp. 89–90.
  4. 1 2 Lyon, p. 251.
  5. 1 2 3 Hildebrand, Röhr, & Steinmetz, p. 27.
  6. Hildebrand, Röhr, & Steinmetz, pp. 27–28.
  7. 1 2 3 4 Hildebrand, Röhr, & Steinmetz, p. 28.
  8. Hildebrand, Röhr, & Steinmetz, pp. 28–29.
  9. 1 2 Hildebrand, Röhr, & Steinmetz, p. 29.

Related Research Articles

SMS <i>Gneisenau</i> (1879) Screw corvette of the German Imperial Navy

SMS Gneisenau was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian Field Marshal August von Gneisenau. She was the fifth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Gneisenau was laid down in June 1877, launched in September 1879, and was commissioned into the fleet in October 1880. She was armed with a battery of fourteen 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Moltke</i> (1877) Screw corvette of the German Imperial Navy

SMS Moltke was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian Field Marshal Helmuth von Moltke the Elder. She was the fourth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Moltke was laid down in July 1875, launched in October 1877, and was commissioned into the fleet in April 1878. She was armed with a battery of ten 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Kronprinz</i> (1867) Armored frigate of the German Imperial Navy

SMS Kronprinz  was a unique German ironclad warship built for the Prussian Navy in 1866–1867. Kronprinz was laid down in 1866 at the Samuda Brothers shipyard at Cubitt Town in London. She was launched in May 1867 and commissioned into the Prussian Navy that September. The ship was the fourth ironclad ordered by the Prussian Navy, after Arminius, Prinz Adalbert, and Friedrich Carl, though she entered service before Friedrich Carl. Kronprinz was built as an armored frigate, armed with a main battery of sixteen 21 cm (8.3 in) guns; several smaller guns were added later in her career.

SMS <i>Hansa</i> (1872) Armored corvette of the German Imperial Navy

SMS Hansa  was a German ironclad warship built in 1868–1875. She was the first ironclad built in Germany; all previous German ironclads had been built in foreign shipyards. She was named after the Hanseatic League, known in Germany simply as Hanse, Latinized Hansa. The ship was launched in October 1872 and commissioned into the German Imperial Navy in May 1875. Designed as for coastal bombardment, Hansa was classed as an armored corvette and armed with eight 21 cm (8.3 in) guns in a central battery.

SMS <i>Stein</i> Screw corvette of the German Imperial Navy

SMS Stein was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named after the Prussian statesman Heinrich Friedrich Karl vom und zum Stein. She was the sixth member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Stein was laid down in 1878, launched in September 1879, and was commissioned into the fleet in October 1880. She was armed with a battery of twelve 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Zieten</i> Aviso of the German Imperial Navy

SMS Zieten was the first torpedo-armed aviso built for the Imperial German Navy. She was built in Britain in 1875–1876, and was the last major warship built for Germany by a foreign shipyard. Ordered as a testbed for the new Whitehead torpedo, Zieten was armed with a pair of 38 cm (15 in) torpedo tubes, and was capable of a top speed of 16 knots, making her the fastest ship in the German fleet at the time. Zieten was the first torpedo-armed vessel in a series of avisos that ultimately developed into the first light cruisers. In addition to her impact in German warship design, Zieten also influenced numerous other navies, who built dozens of similar avisos and torpedo vessels of their own.

SMS <i>Stosch</i> Screw corvette of the German Imperial Navy

SMS Stosch was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. The ship was named for Admiral Albrecht von Stosch, the first chief of staff of the newly created Imperial Navy. She was the third member of the class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Stosch was laid down in November 1875, launched in October 1876, and was commissioned into the fleet in June 1879. She was armed with a battery of ten 15 cm (5.9 in) guns and had a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Bismarck</i> Screw corvette of the German Imperial Navy

SMS Bismarck was a Bismarck-class corvette built for the German Imperial Navy in the late 1870s. She was the lead ship of her class, which included five other vessels. The Bismarck-class corvettes were ordered as part of a major naval construction program in the early 1870s, and she was designed to serve as a fleet scout and on extended tours in Germany's colonial empire. Bismarck was laid down in November 1875, launched in July 1877, and was commissioned into the fleet in August 1878. She was armed with a battery of sixteen 15 cm (5.9 in) guns and had sails, a full ship rig to supplement her steam engine on long cruises abroad.

SMS <i>Charlotte</i> Screw corvette of the German Imperial Navy

SMS Charlotte was a German screw corvette built for the Kaiserliche Marine in the 1880s, being laid down in April 1883, launched in September 1885, and commissioned in November 1886. The only vessel of her class, Charlotte was the last sailing warship built for the German navy. She was armed with a battery of eighteen 15 cm (5.9 in) guns.

SMS <i>Cyclop</i> (1860) Gunboat of the Prussian and German Imperial Navy

SMS Cyclop was a Camäleon-class gunboat of the Prussian Navy that was launched in 1860. A small vessel, armed with only three light guns, Cyclop served during the three wars of German unification; during the first, the Second Schleswig War on 1864, she guarded the Prussian coastline but saw no action. She supported the army's campaign against the Kingdom of Hanover during the Austro-Prussian War of 1866, and she defended the Elbe for the duration of the Franco-Prussian War of 1870–1871, but again took part in no battles. Badly deteriorated by 1872, she was stricken from the naval register in March that year and reconstructed into an iron-hulled gunboat. Recommissioned in 1875, she thereafter served abroad in the German colonial empire before being stricken again in 1888. She was thereafter used as a storage hulk before ultimately being broken up for scrap after 1914.

SMS <i>Sophie</i> Screw corvette of the German Imperial Navy

SMS Sophie was a member of the Carola class of steam corvettes built for the German Kaiserliche Marine in the 1880s. Intended for service in the German colonial empire, the ship was designed with a combination of steam and sail power for extended range, and was equipped with a battery of ten 15-centimeter (5.9 in) guns. Sophie was laid down at the Kaiserliche Werft in Danzig in 1880, she was launched in November 1881, and she was completed in August 1882.

SMS <i>Ariadne</i> (1871) Screw corvette of the Prussian and German Imperial Navy

SMS Ariadne was a steam corvette of the German Kaiserliche Marine. She was the lead ship of the Ariadne class, which included two other ships, Luise and Freya. Ordered as part of a naval expansion program after the Austro-Prussian War, Ariadne was laid down in September 1868, launched in July 1871, and was commissioned in November 1872. Ariadne was a small vessel, armed with a battery of just eight guns.

SMS <i>Freya</i> (1874) Screw corvette of the Prussian and German Imperial Navy

SMS Freya was a steam corvette of the German Kaiserliche Marine. She was the third member of the Ariadne class, which included two other ships, Ariadne and Luise. Ordered as part of a large naval expansion program after the Austro-Prussian War, she was laid down in 1872 after the Franco-Prussian War. She was launched in December 1874 and completed in October 1876. Freya was built to a different design than her sisters, being longer and carrying a heavier battery of twelve guns.

<i>Ariadne</i>-class corvette Screw corvette class of the Prussian and German Imperial Navy

The Ariadne class was a group of three screw corvettes of the North German Federal Navy and Imperial Navy, built in the 1860s and 1870s. The class comprised three ships: Ariadne, Luise, and Freya. The first two vessels were identical, but Freya was built to a modified design with a longer hull, which allowed her to carry more powerful engines and additional coal for the boilers. The ships were ordered as part of a naval construction program directed at strengthening the North German Federal Navy, though by the time they entered service, all of the German states had united into the German Empire. They were intended to serve on extended cruises abroad, protecting German interests overseas. Their primary armament consisted of six or eight 15 cm (5.9 in) guns, and they were fitted with full ship rigs to supplement their steam engines on long voyages abroad.

SMS <i>Prinz Adalbert</i> (1876) Screw corvette of the German Imperial Navy

SMS Prinz Adalbert was a steam corvette of the German Kaiserliche Marine, the second and final member of the Leipzig class. She was laid down in 1875 at the AG Vulcan shipyard in Stettin, was launched in June 1876, and was commissioned into the fleet in August 1877. Originally named Sedan after the Battle of Sedan of the Franco-Prussian War, she was renamed Prinz Adalbert to avoid antagonizing France in 1878, less than a decade after the battle.

SMS <i>Augusta</i> Screw corvette of the Prussian and German Imperial Navy

SMS Augusta was a wooden steam corvette built in the 1860s, the lead ship of the Augusta class. She had one sister ship, Victoria; the ships were armed with a battery of fourteen guns. Augusta was laid down in 1863 at the Arman Brothers shipyard in Bordeaux, France, and was launched in early 1864. Originally ordered by the Confederate States Navy, her delivery was blocked by the French Emperor Napoleon III, and she was instead sold to the Prussian Navy in May 1864. The Prussians had been in search of vessels to strengthen their fleet before and during the Second Schleswig War against Denmark, but Augusta arrived too late to see action in the conflict.

SMS <i>Nymphe</i> (1863) Screw corvette of the Prussian and German Imperial Navy

SMS Nymphe was the lead ship of the Nymphe class of steam corvettes, the first ship of that type to be built for the Prussian Navy. She had one sister ship, Medusa, and the vessels were wooden-hulled ships armed with a battery of sixteen guns. She was ordered as part of a naval expansion program to counter the Danish Navy over the disputed ownership of Schleswig and Holstein. Nymphe was laid down in January 1862, was launched in April 1863, and was completed in October that year.

SMS <i>Medusa</i> (1864) Screw corvette of the Prussian and German Imperial Navy

SMS Medusa was a steam corvette built for the Prussian Navy in the 1860s. She was the second and final member of the Nymphe class, ordered as part of a naval expansion program to counter the Danish Navy over the disputed ownership of Schleswig and Holstein. Medusa was laid down in February 1862, was launched in October 1864, and was completed in September 1865. She had one sister ship, Nymphe, and the vessels were wooden-hulled ships armed with a battery of sixteen guns.

SMS <i>Preussischer Adler</i> Aviso of the Prussian and German Imperial Navy

SMS Preussischer Adler was a paddle steamer originally built in the mid-1840s for use on a packet route between the Kingdom of Prussia and the Russian Empire in the Baltic Sea. She was requisitioned by the Prussian Navy during the First Schleswig War in 1848 and converted into an aviso, the first vessel of the type commissioned by Prussia. During the war, she took part in an inconclusive action with the Danish brig St. Croix, the first naval battle of the Prussian fleet. After the war, she was disarmed and returned to her commercial role, operating uneventfully on the Stettin–St. Petersburg route until 1862, when the expansion of the Prussian Eastern Railway had rendered the maritime route superfluous. The ship was purchased by the Prussian Navy that year and rearmed, once again as an aviso.

SMS <i>Grille</i> Aviso of the Prussian and German Imperial Navy

SMS Grille was an aviso of the Prussian Navy built in France in the mid-1850s as part of a naval expansion program directed by Prince Adalbert of Prussia, who saw the need for a stronger fleet. She was authorized in 1855 in the aftermath of the First Schleswig War, which had demonstrated the weakness of the Prussian fleet. Grille was the first screw propeller-driven steamship to be built for Prussia; all earlier steam-powered vessels had been paddle steamers.

References

Further reading