Prinz Adalbert | |
Class overview | |
---|---|
Operators | |
Preceded by | Arminius |
Succeeded by | Friedrich Carl |
Completed | 1 |
Scrapped | 1 |
History | |
Prussia | |
Name | Prinz Adalbert |
Namesake | Adalbert of Prussia |
Ordered | 16 July 1863 |
Builder | Arman Brothers, Bordeaux |
Launched | June 1864 |
Acquired | 10 July 1865 |
In service | 9 June 1866 |
Out of service | 23 October 1871 |
Stricken | 28 May 1878 |
Fate | Scrapped, 1878 |
General characteristics | |
Type | Ironclad ram |
Displacement | Full load: 1,560 metric tons (1,540 long tons) |
Length | 56.96 m (186 ft 11 in) |
Beam | 9.92 m (32 ft 7 in) |
Draft | 5.02 m (16 ft 6 in) (mean) |
Installed power | |
Propulsion | |
Sail plan | Brig-rigged |
Speed | 9.5 knots (17.6 km/h; 10.9 mph) |
Range | 1,200 nmi (2,200 km; 1,400 mi) at 8 knots (15 km/h; 9.2 mph) |
Complement |
|
Armament |
|
Armor |
|
SMS Prinz Adalbert [lower-alpha 1] was an ironclad warship of the Prussian Navy and later the Imperial fleet. She was built in Bordeaux, France in 1864 for the Confederate States Navy. Prussia bought her during the Second Schleswig War against Denmark, but she was not delivered until after the war. She was designed as an armored ram but also carried three guns: one 21 cm (8.3 in) and two 17 cm (6.7 in) pieces in armored turrets. She was named after Prince Adalbert of Prussia, an early proponent of Prussian naval power.
The ship was poorly built and as a result had a very limited service career. She was heavily modified after her delivery to Prussia in 1865 and briefly served with the fleet between 1866 and 1871. During the Franco-Prussian War in 1870–1871, the ship was assigned as a guard ship in Hamburg. After the war, it was discovered that the internal wood construction was badly rotted; she was therefore removed from service in October 1871. Prinz Adalbert was stricken from the naval register in May 1878 and broken up for scrap that year.
Prinz Adalbert was 50.48 meters (165 ft 7 in) long at the waterline and 56.96 m (186 ft 11 in) long overall. She had a beam of 9.92 m (32 ft 7 in) and a draft of 4.96 m (16 ft 3 in) forward and 5.02 m (16 ft 6 in) aft. She was designed to displace 1,440 metric tons (1,420 long tons ) at a normal load and up to 1,560 t (1,540 long tons) at full load. The ship's hull was constructed from transverse frames, and included both iron and timber. The hull was sheathed in copper to protect it from parasites and biofouling and it featured a pronounced tumblehome. The Prussians regarded the ship as a poor seaboat. The ram bow caused the vessel to ship a great deal of water. It was, however, responsive to commands from the helm and had a very tight turning radius. Prinz Adalbert had a crew of ten officers and 120 enlisted men. [1] [2]
Prinz Adalbert's propulsion system was provided by Mazeline, based in Le Havre. The ship was powered by a pair of 2-cylinder single-expansion steam engines, each of which drove a four-bladed screw propeller that was 3.6 m (11 ft 10 in) in diameter. The engines were placed in a single engine room. Two trunk boilers, also in a single boiler room, supplied steam to the engines at 1.5 standard atmospheres (150 kPa ). Her propulsion system was rated to produce 1,200 PS (1,184 ihp ) for a top speed of 9.5 knots (17.6 km/h; 10.9 mph). Two rudders were fitted side by side to control the vessel and ensure good maneuverability, because the ram was its primary offensive weapon. The ship was initially fitted with a 740-square-meter (8,000 sq ft) brig sailing rig to supplement the steam engines, though this was subsequently replaced with a 677-square-meter (7,290 sq ft) topsail schooner rig. [1] [3]
As built, Prinz Adalbert was armed with a main battery of three rifled 36-pounder muzzle-loading guns. One was placed in a fixed five-port bow casemate, while the other two were located in a fixed two-port turret amidships. The guns were on movable pivot mounts to allow them to fire through the different firing ports. [1]
After delivery in 1865, the French guns were replaced with Krupp-built guns: a 21 cm RK L/19 gun of 20.95-centimeter (8.25 in) caliber was placed in the bow and two 17 cm RK L/25 of 17.26 cm (6.80 in) caliber were placed in the central battery. The forward gun was supplied with 76 rounds of ammunition while the central guns had 71 shells each. Prinz Adalbert was armored with wrought iron, which was mounted on the wooden hull. The armored belt, which protected the waterline of the ship, was 127 mm (5 in) thick. The turrets were protected by 114 mm (4.5 in) of armor plating on the sides. [1] [3]
Prinz Adalbert was built under the cover name Cheops along with a sister ship named Sphinx by the French shipyard of the Arman Brothers in Bordeaux. Nominally being built for the Egyptian Navy, they were actually intended for sale to the Confederate States of America. The French emperor, Napoleon III, intervened and ordered Arman Brothers to sell both vessels to another navy immediately. In early 1864 during the Second Schleswig War between the Prussian and Austrian alliance and Denmark, both the Prussian and Danish fleets sought vessels that could be purchased abroad. The Prussians initially requested vessels for purchase through their consul in Toulon, including an ironclad. After several letters were exchanged, Korvettenkapitän (KK—Corvette Captain) Ludwig von Henk and Carl Elbertzhagen, the chief Prussian naval engineer and member of the Admiralitätsrat (Admiralty Council), traveled to France on 28 April to inspect Cheops on the slipway. On 31 March, Denmark secured the contract for Sphinx but Cheops was sold to Prussia on 25 May. [2] [4] [5]
Delivery was scheduled for 1 August, but after the Prussian naval engineer Guyot went to Bordeaux to supervise completion of the ship, he determined that the shipyard could not complete the ship in time to meet the delivery date. And by that time, the Danish had received Sphinx and had experienced significant problems with the vessel. As a result, the Prussians cancelled the order, though they reinstated it in January 1865, in part due to their satisfaction with the two Augusta-class corvettes, which they had also purchased from Arman Brothers. The shipyard persuaded the Prussians to reconsider, and agreed to deliver the ship on 1 April. By the time Prussia agreed to purchase the vessel, the war was over. The French government nevertheless initially refused to transfer the vessel, due to Arman's repeated attempts to obscure the intended buyer, first the Confederate Navy and then the Prussian Navy. The vessel was finally delivered in October and Kapitänleutnant (KL—Lieutenant Captain) Archibald MacLean oversaw the voyage to Prussia. [2] [5] [6]
The ship, still named Cheops, left Bordeaux on 3 May and stopped in Cherbourg and Gothenburg, Sweden, to coal on the way to Prussia. She arrived in Neufahrwassar on 25 May. Initial sea trials revealed that the ship handled better than expected, but her ram bow created a very large wave that flooded water into the forward gun position. The ship was lightly grounded on 3 June, which required minor repairs. She failed to reach her contract speed of 12 knots (22 km/h; 14 mph), so Arman accepted a price reduced by 100,000 francs. She was renamed on 29 October as Prinz Adalbert, after Prince Adalbert, one of the creators of the fleet, and she was formally commissioned on 10 June 1866; she was the second ironclad acquired by the Prussian Navy, [7] [8] following the turret ship Arminius. [9]
She was found to be in poor condition on entering service with the fleet, [10] which itself was in poor logistical condition. Though commissioned on 10 June, still under the command of MacLean, he had to remain ashore for the first two days of his official service as the ship's captain. His executive officer was not available until 15 June, and the first group of sailors arrived to find no food available. MacLean had to provide them an advance on their pay so they could buy food in town. Also, they were provided with just one set of uniforms. These deficiencies were emblematic of the state of the Prussian Navy in the early 1860s. She went to sea for the first time under the Prussian flag on 12 July, carrying a load of munitions to the fortress at Friedrichsort outside Kiel. She then left for the North Sea, but encountered bad weather on the way and had to seek shelter in Mandal, Norway. Prinz Adalbert was found to leak badly during the voyage, and upon enter the Weser, an inspection revealed her hull seams to have been caulked poorly. These operations coincided with the Austro-Prussian War; the ship was nominally under the command of Vizeadmiral (Vice Admiral) Eduard von Jachmann, but due to the lack of opponents in the North and Baltic Seas, coupled with the ship's bad condition, she saw no action during the war. [11] [12]
The ship did not last long in service due to a lengthy list of defects. These included general poor construction, defects with her armor plate, significant gaps between the armor and hull timbers, and galvanic corrosion between the iron armor and copper sheathing below the waterline. She was also unable to use her sailing rig. Much of the fault lay with the use of low-quality wood in the construction of her hull. These problems necessitated significant refurbishment, and she was decommissioned on 25 October at the naval depot at Geestemünde in 1868–1869. Her armor plating had to be removed and reinstalled, a breakwater was installed at the stern of the ship, and the main mast had to be relocated. She was re-rigged to a schooner rig during this refit. During this period, a London-based company approached Prussia in an attempt to purchase the ship for the Greek Navy. Jachmann approved the sale, but the Admiralty rejected the offer. Despite the repairs, Prinz Adalbert continued to suffer from severe leaking throughout her short career and she remained a poor sailing vessel. [10] [11]
Prinz Adalbert returned to service on 14 April 1869, and she was assigned as a guard ship based in the lower Elbe. She was stationed in Altona, where she was visited frequently by the citizens of Hamburg. On 19 June, the ship sailed to the future site of the naval base at Wilhelmshaven for a ceremony marking the beginning of construction. In May 1870, Prinz Adalbert, despite still leaking badly, joined the three armored frigates Friedrich Carl, Kronprinz, and König Wilhelm for a visit to Britain, though Friedrich Carl was damaged after running aground in the Great Belt. Prinz Adalbert, König Wilhelm, and Kronprinz continued on to Plymouth while Friedrich Carl returned to Kiel for repairs. The latter vessel quickly rejoined the ships there and on 1 July they departed for a training cruise to Fayal in the Azores, Portugal. But as tensions with France over the Hohenzollern candidacy for the vacant Spanish throne. While they cruised east through the English Channel, they learned of the increasing likelihood of war, and the Prussians detached Prinz Adalbert to Dartmouth to be kept informed of events. The rest of the squadron joined her there on 13 July, and as war seemed to be imminent, the Prussians ended the cruise and returned to home. Kronprinz had to take Prinz Adalbert under tow for the voyage due to the latter's slow speed. [11] [13]
The ships arrived back in Wilhelmshaven on 16 July, three days before France declared war on Prussia over the Ems Dispatch, initiating the Franco-Prussian War of 1870–1871. The greatly numerically inferior Prussian Navy assumed a defensive posture against a naval blockade imposed by the French Navy. For the duration of the conflict, Prinz Adalbert served as a harbor guard ship in Hamburg, leading a flotilla of four gunboats and seven torpedo boats equipped with spar torpedoes. From July, she came under the command of KL Friedrich von Hacke. She made several sorties into the North Sea, but did not encounter French warships. After the end of the war, Prinz Adalbert returned to her previous duty as guard ship in the Elbe. [13] [14] [15] The ship was leaking so badly by this time that her pumps had to be run constantly to avoid foundering. Her timber hull was found to be rotten in 1871, which forced her decommissioning on 28 October, from what was now the Kaiserliche Marine (Imperial Navy) of the German Empire. The navy considered using the ship as a training ship for engine room crews, but her poor condition, coupled with the fact that her outdated machinery was not particularly useful for training purposes, led to the abandonment of the idea. [5] [16] She was removed from service on 23 October 1871 and disarmed in 1875–1876. The ship was formally stricken from the naval register on 28 May 1878. She was broken up that year in Wilhelmshaven, and her engines and armor plate were removed and reused. [1] [16]
SMS Preussen was an ironclad turret ship built for the German Kaiserliche Marine. The ship was built by the AG Vulcan shipyard in Stettin in 1871–1876; she was commissioned into the fleet in July 1876. She was the first large warship of the German navy built by a private shipyard; all previous vessels had been ordered abroad or built by Royal or Imperial dockyards. Her main battery of four 26 cm (10.2 in) guns was mounted in a pair of twin gun turrets amidships.
SMS Grosser Kurfürst was an ironclad turret ship built for the German Kaiserliche Marine. She was laid down at the Imperial Dockyard in Wilhelmshaven in 1870 and completed in 1878; her long construction time was in part due to a redesign that was completed after work on the ship had begun. Her main battery of four 26 cm (10 in) guns was initially to be placed in a central armored battery, but during the redesign, this was altered to a pair of twin gun turrets amidships.
SMS Arminius was an ironclad warship of the Prussian Navy, later the Imperial German Navy. The vessel was a turret ship that was designed by the British Royal Navy Captain Cowper Coles and built by the Samuda Brothers shipyard in Cubitt Town, London as a speculative effort; Prussia purchased the ship during the Second Schleswig War against Denmark, though the vessel was not delivered until after the war. The ship was armed with four 21 cm (8.3 in) guns in a pair of revolving gun turrets amidships. She was named for Arminius, the victor of the Battle of the Teutoburg Forest.
The Roon class was a pair of armored cruisers built for the German Kaiserliche Marine in the 1900s. The two ships of the class, Roon and Yorck, closely resembled the earlier Prinz Adalbert-class cruisers upon which they were based. The Roon class incorporated slight incremental improvements, including a pair of extra boilers. The ships were easily distinguished from their predecessors by the addition of a fourth funnel. Though the additional boilers were meant to increase the ships' speed, both vessels failed to reach their designed top speed. In addition, the ships had comparatively light armament and thin armor protection, so they compared poorly with their foreign contemporaries, particularly the armored cruisers of their primary opponent, the British Royal Navy.
The Prinz Adalbert class was a group of two armored cruisers built for the German Kaiserliche Marine under the terms of the Second Naval Law. Two ships of the class were built, Prinz Adalbert and Friedrich Carl, between 1900 and 1904. The two ships were heavily based on the previous armored cruiser, Prinz Heinrich, with a series of incremental improvements. Their armor layout was revised slightly to improve internal protection and their main battery consisted of four 21 cm (8.3 in) guns instead of the two 24 cm (9.4 in) carried by Prinz Heinrich. The new ships also received more powerful propulsion systems, making them slightly faster. Prinz Adalbert spent her peacetime career as a gunnery training ship while Friedrich Carl initially served as the flagship of the fleet's reconnaissance forces. By 1909, she had been replaced by more modern cruisers and joined Prinz Adalbert as a training vessel.
SMS Prinz Heinrich was a unique German armored cruiser built at the turn of the 20th century for the German Kaiserliche Marine, named after Kaiser Wilhelm II's younger brother Prince Heinrich. The second vessel of that type built in Germany, Prinz Heinrich was constructed at the Kaiserliche Werft in Kiel, being laid down in December 1898, launched in March 1900, and commissioned in March 1902. Prinz Heinrich's design was a modification of the previous armored cruiser, Fürst Bismarck, and traded a smaller main battery and thinner armor for higher speed. All subsequent German armored cruisers were incremental developments of Prinz Heinrich.
SMS Kronprinz was a unique German ironclad warship built for the Prussian Navy in 1866–1867. Kronprinz was laid down in 1866 at the Samuda Brothers shipyard at Cubitt Town in London. She was launched in May 1867 and commissioned into the Prussian Navy that September. The ship was the fourth ironclad ordered by the Prussian Navy, after Arminius, Prinz Adalbert, and Friedrich Carl, though she entered service before Friedrich Carl. Kronprinz was built as an armored frigate, armed with a main battery of sixteen 21 cm (8.3 in) guns; several smaller guns were added later in her career.
SMS Hansa was a German ironclad warship built in 1868–1875. She was the first ironclad built in Germany; all previous German ironclads had been built in foreign shipyards. She was named after the Hanseatic League, known in Germany simply as Hanse, Latinized Hansa. The ship was launched in October 1872 and commissioned into the German Imperial Navy in May 1875. Designed as for coastal bombardment, Hansa was classed as an armored corvette and armed with eight 21 cm (8.3 in) guns in a central battery.
SMS Prinz Adalbert was a steam corvette of the German Kaiserliche Marine, the second and final member of the Leipzig class. She was laid down in 1875 at the AG Vulcan shipyard in Stettin, was launched in June 1876, and was commissioned into the fleet in August 1877. Originally named Sedan after the Battle of Sedan of the Franco-Prussian War, she was renamed Prinz Adalbert to avoid antagonizing France in 1878, less than a decade after the battle.
The Leipzig class was a group of two screw corvettes built for the German Kaiserliche Marine in the 1870s. The two ships of the class were Leipzig and Prinz Adalbert; Prinz Adalbert was originally named Sedan after the Battle of Sedan, but was renamed shortly after entering service to avoid angering France. They were based on the earlier corvette Freya, but were significantly larger, carried a stronger armament, and unlike the wooden-hulled Ariadne-class corvettes, adopted iron construction, making them the first corvettes of the German fleet to be built with iron. Originally intended to serve abroad and with the fleet, British experiences during the Battle of Pacocha in 1877 convinced the German naval command that unarmored warships were useless against the fleets of ironclads being built by the European navies, and so Leipzig and Prinz Adalbert would be used only on foreign stations.
The Augusta class of screw corvettes were a pair of vessels acquired by the Prussian Navy in the 1860s. The class comprised two ships, Augusta and Victoria. The ships were originally secretly ordered by the Confederate States Navy in 1863 from Arman Brothers shipyard in Bordeaux, France, purportedly for the Japanese fleet. The ships, intended to be named Mississippi and Louisiana, were given the cover names Yeddo and Osaka in an attempt to hide their destination, but their delivery was blocked by the French Emperor Napoleon III in 1864. Both ships were sold to the Prussian Navy in May 1864, as the Prussians had been in search of vessels to strengthen their fleet before and during the Second Schleswig War against Denmark, though they entered service too late to see action in the conflict. The ships were intended to be used as blockade runners, but once they entered service they were too slow to be used in that capacity.
SMS Nymphe was the lead ship of the Nymphe class of steam corvettes, the first ship of that type to be built for the Prussian Navy. She had one sister ship, Medusa, and the vessels were wooden-hulled ships armed with a battery of sixteen guns. She was ordered as part of a naval expansion program to counter the Danish Navy over the disputed ownership of Schleswig and Holstein. Nymphe was laid down in January 1862, was launched in April 1863, and was completed in October that year.
The Nymphe class of screw corvettes were the first vessels of the type to be built for the Prussian Navy in the early 1860s. The class comprised two vessels, Nymphe and Medusa. The ships were laid down in early 1862, and Nymphe was completed by late 1863, but work on Medusa proceeded slower, owing to budgetary disputes with the Prussian parliament and a desire to use experience in building Nymphe during the former's construction. The ships were built as part of a naval expansion program aimed at countering the powerful Danish Navy in the context of the disputed ownership of Schleswig and Holstein. The ships were armed with a battery of sixteen guns, and were capable of a top speed of 12 knots under steam power. All of the material used in their construction was domestically produced, apart from the propulsion system, which was imported from Great Britain.
SMS Preussischer Adler was a paddle steamer originally built in the mid-1840s for use on a packet route between the Kingdom of Prussia and the Russian Empire in the Baltic Sea. She was requisitioned by the Prussian Navy during the First Schleswig War in 1848 and converted into an aviso, the first vessel of the type commissioned by Prussia. During the war, she took part in an inconclusive action with the Danish brig St. Croix, the first naval battle of the Prussian fleet. After the war, she was disarmed and returned to her commercial role, operating uneventfully on the Stettin–St. Petersburg route until 1862, when the expansion of the Prussian Eastern Railway had rendered the maritime route superfluous. The ship was purchased by the Prussian Navy that year and rearmed, once again as an aviso.
SMS Salamander was the second and final member of the Nix class of avisos that were built for the Prussian Navy in the early 1850s. The ship saw little active use, apart from limited training exercises. In 1855, the ship was sold to the British Royal Navy in part exchange for the sail frigate Thetis and was commissioned as HMS Recruit. After entering service, she saw action in the Black Sea during the Crimean War, where she took part in operations against Russian logistics. The Royal Navy thereafter did not put the vessel to much use either, as she remained idle in Valletta, Malta, until late 1861, with the only events of note taking place in 1857 when she helped recover a gunboat and two merchant ships that had run aground in the region. Recruit was recalled to Britain in late 1861, thereafter remaining in reserve until 1869. In the 1870s she became a merchant ship, and was then used as a gunpowder magazine at Cape Town.
The Nix class was a pair of avisos built for the Prussian Navy in the early 1850s. The class comprised two ships: SMS Nix and Salamander. They were ordered as part of a modest program to strengthen the fleet at the urging of Prince Adalbert of Prussia in the immediate aftermath of the First Schleswig War, which had demonstrated that the weak fleet could not challenge the ability of Denmark to impose a blockade of Prussian and German ports. They were small vessels with a shallow draft, since they were intended to operate close to shore to defend Prussia's coast. Neither vessel saw significant service in the Prussian Navy before being sold to the British Royal Navy in exchange for the frigate Thetis in 1855. They were renamed Weser and Recruit, respectively, and the former saw action during the Crimean War in the Black Sea later in 1855. The two ships saw little activity after their sale to Britain, with Recruit being laid up in 1861 and Weser following in 1865. Recruit was sold for merchant service in 1870, while Weser was discarded in 1873.
SMS Grille was an aviso of the Prussian Navy built in France in the mid-1850s as part of a naval expansion program directed by Prince Adalbert of Prussia, who saw the need for a stronger fleet. She was authorized in 1855 in the aftermath of the First Schleswig War, which had demonstrated the weakness of the Prussian fleet. Grille was the first screw propeller-driven steamship to be built for Prussia; all earlier steam-powered vessels had been paddle steamers.
SMS Loreley was an aviso of the Prussian Navy built in the late 1850s. Built as a paddle steamer, since the Prussian naval command was not convinced of the reliability of screw propellers, she was the first Prussian warship to be fitted with a domestically-produced marine steam engine. The ship carried a light armament of two 12-pound guns and had a top speed of 10.5 knots. Loreley was intended to serve as the flagship of the gunboat flotillas that formed the bulk of the Prussian fleet in the 1850s.