Santa Fe 769

Last updated
Santa Fe 769
Atchison, Topeka and Santa Fe 769 in Madrid, 2021.jpg
No. 769 on static display in Madrid, New Mexico, slowly awaiting to be removed from the dirt, 2021
Type and origin
Power typeSteam
Builder Richmond Locomotive Works
Serial number2957
Build dateJune 1900
Specifications
Configuration:
​
 •  Whyte 2-8-0
 •  UIC 1'D
Gauge 4 ft 8+1⁄2 in (1,435 mm)
Driver dia.57 in (1,400 mm)
Wheelbase:​
 • Engine23 in (580 mm)
 • Drivers15 in (380 mm)
Adhesive weight 161,650 lbf (719,100 N)
Loco weight179,300 lbf (798,000 N)
Tender weight105,000 lb (48,000 kg)
Total weight284.300 lb (128.956 kg)
Fuel type Coal
Fuel capacity12 t (12 long tons; 13 short tons)
Water cap.9,000 US gal (34,000 L; 7,500 imp gal)
Firebox:​
 • Grate area30 sq ft (2.8 m2)
Boiler pressure195 psi (1,340 kPa)
Heating surface:​
 • Firebox183 sq ft (17.0 m2)
 • Total surface2,190 sq ft (203 m2)
Cylinders Two, outside
Cylinder size 21 in × 30 in (530 mm × 760 mm)
Valve gear Stephenson
Performance figures
Tractive effort 39,458 lbf (175,520 N)
Career
Operators Santa Fe Pacific Railroad
Atchison, Topeka and Santa Fe Railway
Albuquerque and Cerrillos Coal Company
Class 769
NumbersSFP 266
ATSF 3045
ATSF 769
Retired1954
Current ownerOld Coal Mine Museum
DispositionAwaiting for restoration to operating condition

Atchison, Topeka and Santa Fe No. 769 is a preserved 769 class 2-8-0 "consolidation" type steam locomotive originally built by the Richmond Locomotive Works in 1900 as one of the Santa Fe Pacific Railroad's final locomotives. It was originally numbered 266 before the SFP had completely merged into its parent company, the Atchison, Topeka and Santa Fe Railway, and the locomotive was renumbered 3045, and it was eventually renumbered again to 769. The locomotive was put into use for short-distance freight trains and for yard switching before being sold again in 1950 to the Albuquerque and Cerrillos Coal Company in Madrid, New Mexico for more yard switching and short distance coal trains. As the 1950s progressed, however, the company shut down due to bankruptcy, and No. 769 was abandoned along with the rest of the locomotive yard and the rest of Madrid. In the late 1970s the town was recovered and converted into a heritage town, and No. 769 was then put on static display just behind the shed it was stored in, which was converted to the Engine House Theatre. In early 2020, No. 769 was selected for a future project to restore it to operating condition to eventually run on reconstructed trackage between Madrid and a nearby BNSF interchange near Los Cerrillos.

Contents

History

Original service life

After becoming a subsidiary of the Atchison, Topeka and Santa Fe Railway in 1897, the Atlantic and Pacific Railroad decided to upgrade their steam locomotive fleet with a series of 2-8-0 "consolidation" types. [1] The first order came with eighteen locomotives from the Baldwin Locomotive Works in Philadelphia, Pennsylvania and Dickson Locomotive Works in Scranton, Pennsylvania in 1899, initially numbered 1–18 right before being renumbered 246–265. A second batch of twenty locomotives from the Richmond Locomotive Works of Richmond, Virginia came along the following year, numbered 266–285. No. 769 was numbered 266 at the time and was the very first of the Richmond batch that came in 1900, one year before the Richmond works would merge into the American Locomotive Company. These little locomotives were commonly used for freight service on the mainline, as 2-8-0s were the most common wheel arrangement to show up at the time. In 1902, the SFP became completely absorbed into the Santa Fe, and a renumbering system was in order for the 2-8-0s; Nos 246–265 were renumbered 3030–3044 and 3100–3102. Nos 266–285 were also renumbered 3045–3064. Only a few years later, the 2-8-0s were renumbered again; the 1899 group of locomotives renumbered Nos 699–706 and 719–728, and the 1900 group of locomotives renumbered 769–788.

These little locomotives were primarily used for mainline freight trains throughout the Santa Fe system in Arizona, New Mexico, Texas, and Kansas until the mid-late 1910s, when larger locomotives, including the 2-10-2 "Santa Fe" type and the 2-8-2 "Mikado", were becoming more frequently built in favor of the growing freight traffic, and the 2-8-0s, including No. 769, were relegated to yard switching and pulling shorter freight trains on branch lines. As the 1930s and 1940s progressed, the Santa Fe retired their aging 2-8-0s and sold them for scrap, but No. 769 was one of the exceptions. At one point, the locomotive swapped tenders with 4-6-2 No. 1227. In April 1950, No. 769 was sold off to the Albuquerque and Cerrillos Coal Company in the mountain-based town of Madrid, New Mexico, which was located at the end of a branch extending south from the Santa Fe main at Waldo. [2] There, No. 769 was only accompanied by 2-8-0s No. 772, 870, and 874. It was regularly used by the A&CCCO to haul coal and water between Madrid and Santa Fe to provide warmth for the citizens who lived in Madrid. However, No. 769's time at the A&CCCO was cut short in 1954, when the company decided to cease all train operations after a catastrophic fire burned down the building that stored most of their coal, and coal marketing was declining in favor of oil marketing. No. 772 and 874 would be sold for scrap as an attempt for the company to recoup some of their financial losses, but to no avail. By the end of the decade, the entire town itself was abandoned, and Nos 769 and 870 would sit idle there for the next twenty years. While No. 870 was left outside, exposed to the elements, No. 769 was stored underneath one of very few engine sheds that were left there.

Preservation

In the late 1970s, the ghost town of Madrid was rediscovered by a group of explorers, and the town was soon re-populated as an artist community and tourist attraction. While No. 870 was sold off to Santa Fe Springs, California, No. 769 remained in Madrid, [3] and was sold in 1982 to Joe Huber. Huber cosmetically restored the locomotive, [4] and moved No. 769 outside its previous storage shed, which was converted to a Theatre [5] as part of Madrid's Old Coal Mine Museum. [6] No. 769 was facing forward toward the stage as a dramatic backdrop. However, No. 769 is in an active flood zone. When the town of Madrid experienced floods, No. 769's wheels were buried in deposits of sand and silt, which required the locomotive to be regularly dug out. Local road enhancement projects completed in 2010 now prevent severe flooding in Madrid, [7] but 769's wheels remained buried in about one foot of dirt, with the tracks intact underneath.

Since March 2020, the Old Coal Mine Museum’s new owner, Lori Lindsey, has invited volunteers from the New Mexico Steam Locomotive and Railroad Historical Society (NMS&RHS) and the Cumbres and Toltec Scenic Railroad to help clean and inspect No. 769, with most of the components deemed to be in good condition as a result of the Southwestern United States's dry climate. This work is part of the early process of restoring No. 769 to operating condition. [8] Some features of No. 769 remain in disrepair, including the smokebox, which is corroded and filled with sawdust due to the locomotive's uncovered smokestack, and the tender, which has begun to develop cracks. Volunteers are currently preparing the locomotive to be moved, either to a temporary shop in Madrid or a roundhouse in Albuquerque, to perform a necessary rebuild on the locomotive, estimated to cost over $1.2 million. The Old Coal Mine Museum had originally considered leasing No. 769 to the Santa Fe Southern Railway, in order to operate it there, but it was later discovered that the locomotive is too heavy for the Santa Fe Southern’s trackage and bridges. As of 2024, the museum is raising additional funds to reconstruct the old Madrid line to eventually begin their own tourist operation with No. 769.

Historical significance

Although there are seven other surviving Santa Fe 2-8-0s, No. 769 is the sole survivor of its particular class, and it was the first locomotive of said class.

No. 769 is the last locomotive built by the Richmond Locomotive Works before their 1901 merging into the American Locomotive Company that’s preserved in the United States. [9] The only other pre-1901 Richmond survivor is 4-6-0 No. 293 in Saint Petersburg, Russia.

See also

Related Research Articles

<span class="mw-page-title-main">BNSF Railway</span> American freight railroad

BNSF Railway is the largest freight railroad in the United States. One of six North American Class I railroads, BNSF has 36,000 employees, 33,400 miles (53,800 km) of track in 28 states, and over 8,000 locomotives. It has three transcontinental routes that provide rail connections between the western and eastern United States. BNSF trains traveled over 169 million miles in 2010, more than any other North American railroad.

<span class="mw-page-title-main">2-10-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, a 2-10-4 locomotive has two leading wheels on one axle, usually in a Bissel truck, ten coupled driving wheels on five axles, and four trailing wheels on two axles, usually in a bogie. These were referred to as the Texas type in most of the United States, the Colorado type on the Burlington Route, and the Selkirk type in Canada.

<span class="mw-page-title-main">4-8-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.

<span class="mw-page-title-main">Waldo, New Mexico</span> Ghost town in New Mexico, United States

Waldo was a ghost town in Santa Fe County, New Mexico, United States.

<span class="mw-page-title-main">Atchison, Topeka and Santa Fe Railway</span> Former railroad company in the United States

The Atchison, Topeka and Santa Fe Railway, often referred to as the Santa Fe or AT&SF, was one of the largest Class 1 railroads in the United States.

Under the Whyte notation for the classification of steam locomotives, 2-10-2 represents the wheel arrangement of two leading wheels, ten powered and coupled driving wheels, and two trailing wheels. In the United States and elsewhere the 2-10-2 is known as the Santa Fe type, after the Atchison, Topeka and Santa Fe Railway that first used the type in 1903.

<span class="mw-page-title-main">2-8-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-8-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles, and no trailing wheels. In the United States and elsewhere, this wheel arrangement is commonly known as a Consolidation, after the Lehigh and Mahanoy Railroad’s Consolidation, the name of the first 2-8-0.

<span class="mw-page-title-main">Grand Canyon Railway</span> Historic railway to Grand Canyon National Park in Arizona

The Grand Canyon Railway is a heritage railroad which carries passengers between Williams, Arizona, and the South Rim of Grand Canyon National Park.

<span class="mw-page-title-main">Santa Fe 2926</span> Preserved Santa Fe 2900 class 4-8-4 locomotive

Atchison, Topeka and Santa Fe 2926 is a class "2900" 4-8-4 type steam locomotive built in May 1944 by the Baldwin Locomotive Works for the Atchison, Topeka & Santa Fe Railway (ATSF). It was used to pull passenger and fast freight trains, mostly throughout New Mexico, until it was retired from revenue service in 1953. Three years later, it was donated to Coronado Park in Albuquerque for static display.

The Prescott and Eastern Railroad (P&E) was a non-operating subsidiary of the Santa Fe, Prescott and Phoenix Railway (SFP&P) in Arizona. The 26.4 mile (42.5 km) common carrier railroad was built to serve the mines in the region. The railroad built from a connection with the SFP&P at Entro and extended south to Poland Junction and terminated at Mayer. At Poland Junction and Mayer the P&E connected with the Bradshaw Mountain Railroad, also a non-operating subsidiary of the SFP&P. After various mergers the P&E was merged into the Atchison, Topeka and Santa Fe Railway. The line was later abandoned by the Santa Fe Railway.

<span class="mw-page-title-main">Santa Fe, Prescott and Phoenix Railway</span> Former railway in Arizona

The Santa Fe, Prescott and Phoenix Railway (SFP&P) was a common carrier railroad that later became an operating subsidiary of the Atchison, Topeka and Santa Fe Railway in Arizona. At Ash Fork, Arizona, the SFP&P connected with Santa Fe's operating subsidiary, the Atlantic & Pacific Railroad mainline, that ran from California to Chicago. The SFP&P's 195-mile (314 km) line extended the Santa Fe Railway south into Phoenix. The SFP&P extended another 100 miles (160 km) to the east from Phoenix to Florence and Winkelman via the Phoenix and Eastern Railroad. The SFP&P also served several mines in the Prescott area, including the Derby Mine by way of the Summit (flag) Station at 'Prieta' in the Sierra Prieta range, through its various subsidiary railroads.

<span class="mw-page-title-main">Santa Fe 1010</span> Preserved Santa Fe class 1000 2-6-2 locomotive

Atchison, Topeka and Santa Fe Railway No. 1010 is a 2-6-2 type steam locomotive built by the Baldwin Locomotive Works in 1901 for Atchison, Topeka and Santa Fe Railway. It started out as a Vauclain compound locomotive before it was rebuilt into a conventional locomotive in the 1910s. It was primarily used for various passenger trains across the Southwestern United States, including the record breaking 1905 Scott Special on the segment between Needles, California, and Seligman, Arizona, before it was reassigned to freight service in the 1940s. It was retired in 1955 and was kept by the Santa Fe for several years for preservation purposes. In 1979, Santa Fe donated No. 1010 to the California State Railroad Museum, where the locomotive resides there in Sacramento as of 2023.

<span class="mw-page-title-main">GE U30CG</span> US passenger diesel locomotive

The GE U30CG was a passenger-hauling diesel-electric locomotive built by GE Transportation Systems. It was a passenger variant of GE's U30C design purchased by the Atchison, Topeka and Santa Fe Railway. ATSF had purchased ten U28CG locomotives in 1966, and while these locomotives were satisfactory operationally, the railroad felt that their utilitarian appearance was unsuitable for its passenger trains. Desiring smooth-sided passenger power, the railroad ordered the first cowl units from both GE and GM-EMD. GE produced the U30CG to meet this requirement. It was mechanically identical to a U30C except that the bodywork was replaced with a full-width long hood with fluted stainless-steel panels, and a full-width rounded nose and slanted cab front were fitted.

<span class="mw-page-title-main">Santa Fe 5000</span> Preserved American 2-10-4 steam locomotive

Santa Fe No. 5000 is a 2-10-4 "Texas" type steam locomotive constructed by Baldwin Locomotive Works in 1930 for the Atchison, Topeka and Santa Fe Railway. No. 5000 was immediately nicknamed the "Madame Queen" and remained a unique member of its own class. It was donated to the City of Amarillo, Texas in 1957. As of 2023, Santa Fe 5000 is maintained by the Railroad Artifact Preservation Society. Santa Fe 5000 is on the National Register of Historic Places.

<span class="mw-page-title-main">Great Plains Transportation Museum</span> Railroad Museum in Wichita, KS USA

The Great Plains Transportation Museum is a railroad museum in Wichita, Kansas, United States.

<span class="mw-page-title-main">Santa Fe 5017</span>

Santa Fe 5017 is a 2-10-4 or "Texas" type steam locomotive built by the Baldwin Locomotive Works in 1944 for the Atchison, Topeka and Santa Fe Railway.

<span class="mw-page-title-main">Santa Fe 3759</span> Preserved American Santa Fe 3751 class 4-8-4 locomotive

Atchison, Topeka and Santa Fe 3759 is a class 3751 4-8-4 "Heavy Mountain" type steam railway locomotive built by the Baldwin Locomotive Works in 1928. It is on display in Locomotive Park, located between Andy Devine Avenue and Beale Street in Kingman, Arizona. The park was established in August 1957 with AT&SF 3759 donated to the City of Kingman in recognition of Kingman's history with the railroad. The locomotive is termed a Mountain type on the nearby information plaque, and also in the city's descriptive material which is correct for the Santa Fe. ATSF 4-8-4s were referenced in documentation as type "Heavy Mountain", "New Mountain" or "Mountain 4-wheel trailer."

<span class="mw-page-title-main">Santa Fe 5</span> Preserved American 0-4-0 locomotive

Atchison, Topeka & Santa Fe No. 5 Little Buttercup is an 0-4-0 steam locomotive.

<span class="mw-page-title-main">Santa Fe 3415</span> Preserved American Santa Fe 3400 class 4-6-2 locomotive

Atchison, Topeka and Santa Fe 3415 is a preserved class "3400" 4-6-2 "Pacific" type steam locomotive built in June 1919 by the Baldwin Locomotive Works for the Atchison, Topeka and Santa Fe Railway. Retired in 1954, it sat in Eisenhower Park in Abilene, Kansas, until 1996. At that point, it was put on display in the Abilene and Smoky Valley yard. Restoration began in 2005 and was completed in early 2009. As of October 7, 2023. No. 3415 is out of service, awaiting its federally mandated 15-year overhaul.

Atchison, Topeka and Santa Fe No. 1316 is a preserved 1309 class 4-6-2 "Pacific" type steam locomotive built by the Baldwin Locomotive Works in 1911 for the Atchison, Topeka and Santa Fe Railway. It was frequently used for pulling fast passenger trains in Texas, until it was reassigned to freight service in the late 1940s. After being retired in 1954, it was donated to the Fort Concho Museum in San Angelo, Texas for static display. In 1980, No. 1316 was acquired by the Texas State Railroad, who moved it to Rusk, Texas and restored it in 1982 as their No. 500. It continued to operate there until 2002, when it was found to be due for an overhaul, and it spent several years in storage, disassembled. As of 2024, No. 1316 has been put back together during a cosmetic restoration and it is awaiting the necessary overhaul required to operate it again.

References

  1. ↑ WOOD, SYLVAN R. (1949). "The Locomotives of the ATCHISON, TOPEKA & SANTA FE RAILWAY SYSTEM". The Railway and Locomotive Historical Society Bulletin (75): 1–182. ISSN   0033-8842. JSTOR   43520039.
  2. ↑ "ATSF 759 #769 - www.rgusrail.com". www.rgusrail.com. Retrieved 2021-03-20.
  3. ↑ "Santa Fe Steam Engines In Madrid, NM. ?". Trainorders.com Discussion. Retrieved 2021-03-21.
  4. ↑ "ATSF 2-8-0 769". atsf.railfan.net. Retrieved 2021-03-20.
  5. ↑ Bureau, T. S. Last | Journal Northern. "Sea of mud, coal washes through Madrid". www.abqjournal.com. Retrieved 2021-03-20.
  6. ↑ "HISTORY & ENGINE 769". mineshaft. Retrieved 2021-03-20.
  7. ↑ "Road Repair Protects New Mexico Ghost Town From Flooding". Storm Water Solutions. Retrieved 2021-03-20.
  8. ↑ "Owner of Atchison, Topeka & Santa Fe 2-8-0 seeks restoration funding". Trains. 6 April 2022. Retrieved 2022-05-16.
  9. ↑ "Steam Locomotive Information". www.steamlocomotive.info. Retrieved 2021-03-20.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.