Slingsby T.9 King Kite | |
---|---|
Role | Glider |
National origin | England |
Manufacturer | Slingsby |
Designer | Mungo Buxton, John Sproule, Fred Slingsby and Peter Shaw |
First flight | 17 April 1937 |
Number built | 3 + 1 replica |
The Slingsby T.9 King Kite is a British glider designed and built by Slingsby that first flew in 1937.
ISTUS (international commission for the study of motorless flight) launched a campaign for gliding's inclusion in the Olympic games, organising an international competition, planned for 4–17 July 1937 for aspiring national teams. The British Gliding Association (BGA) were in a quandary as the only suitable aircraft was the Buxton Hjordis. To replace it Mungo Buxton had started the design of the Hjordis 2 but due to his commitments as a serving RAF officer Buxton handed over the design to Slingsby, Sproule and Shaw to complete the aircraft. Buxton had studied the latest soaring techniques and came to the conclusion that competitive aircraft would need to fly efficiently at higher speeds and not sacrifice glide performance for climb performance.
The result of their efforts, the Slingsby Type 9 King Kite, emerged as a cantilevered gull wing sailplane with wooden structure covered by plywood throughout, except for fabric covered ailerons, tailpane, elevators and rudder. A large comfortable cockpit housed the pilot under a canopy built up from single curved pieces of plexiglas. To ensure full aileron control at high speed it was necessary to build a stiff wing with ribs at half the normal spacing with a deep laminated timber main spar. The trailing edges of the wings were taken up by landing flaps inboard of the gull joint and ailerons outboard.
The first King Kite made its maiden flight on 17 April 1937, with Philip Wills at the controls. Flight tests of the King Kite revealed a tendency to enter spins easily, and more importantly, a reluctance to recover from spins. To alleviate the problem while a permanent solution was found the rudder was increased in size twice, initially in span and later in chord. [1]
The three King Kites, Hjordis and the Falcon III were all shipped to Wasserkuppe in time for the 1937 international competition. The first launch for the British team ended in disaster when Willy Watt, in a King Kite, on his first ever bungee launch attempted to turn immediately after the bungee slipped off the hook, the King Kite spun into the ground disintegrating around the dazed Watt. John Nielan also had an episode with spinning, recovering at very low altitude and then continuing on a cross-country competition task. The reason for the King Kites handling problems was attributed to the inner wing being jigged improperly in the factory, so rectification on the three already built King Kites was impossible.
After their return from Wasserkuppe the two remaining King Kites flew very little before the out break of the Second World War. Both aircraft were impressed by the RAF for use by ATC officers, one breaking up in flight during 1946 and the other transferred to the RAFGSA (Royal Air Force Gliding & Soaring Association) at Detling where it was scrapped in 1950, after glued joints were found to have failed.
In 1978 the blueprints were recovered from storage and a replica King Kite was built by David Jones using modern low drag wing profiles, with advice from Professor Wortmann at Akaflieg Stuttgart.
Data from Jane's World Sailplanes & Motor Gliders [2]
General characteristics
Performance
The Vickers-Slingsby T-65 Vega is a 15-metre class class glider which first flew on 3 June 1977. Of fibreglass construction, it features linked camber-changing flaps and airbrakes, and a retractable main and tailwheel.
The T.31 Tandem Tutor is a British military training glider, designed and built by Slingsby and used in large numbers by the Air Training Corps between 1951 and 1986.
The Slingsby T.20 was a British glider designed and built by Slingsby that first flew in 1944.
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Akaflieg München Mü13 Merlin and Akaflieg München Mü13 Atalante were gliders designed and built in Germany from 1935. A motor-glider version of the Merlin was converted by the addition of a small engine in the nose, as the Mü13M Motormerlin. Post-war development as the Mü13E entered production as the Scheibe Bergfalke.
The Mü-27 is a research glider aircraft that designed and built in Germany in 1979. Only one example was constructed.
The Slingsby T.12 Gull was a British single-seat glider designed and built by Slingsby Sailplanes and first flown in 1938.
The CVT M-200 was a two-seat glider that was designed in Italy and built in Italy and France from 1963.
The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.
The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.
The Slingsby Type 51 Dart is a single seat competition glider designed in the early 1960s, initially as a 15 m span Standard Class aircraft but evolved into an Open Class, 17 m sailplane. It was the last Slingsby sailplane to be mostly constructed of wood.
The Slingsby Type 26 Kite 2 was a post World War II development of the Slingsby Kite, a single seat medium performance sailplane. It sold in small numbers.
The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Buxton Hjordis was a single-seat sailplane built by Slingsby Sailplanes Ltd. in the UK to a design by G.M Buxton. Only one was constructed and was flown by Philip Wills at competitions in Europe between 1935-7.
The EoN 460 series are wooden single-seat standard class sailplanes, built in the UK in the 1960s. It did not have major competition success but some remain in use in 2021.
The Hannover H.1 Vampyr was a German glider designed by Georg Madelung for the 1921 Rhön gliding competition, which was held at the Wasserkuppe from 8 August to 25 August 1921. The Vampyr is believed to be the first heavier than air aircraft to use stressed skin. Several historical societies have argued that the aircraft is the precursor of all modern sailplanes.
The RRG Fafnir 2 São Paulo, named after the legendary dragon and the Brazilian city which partially financed it, was a single seat German high performance glider designed by Alexander Lippisch. It set a new world distance record in 1934 and won the 1937 International Gliding Championships.
The KAI-14 was a Standard Class sailplane designed and built in the USSR in the 1960s. Two participated in the World Gliding Championships of 1965.
The Oberlerchner Mg 19 Steinadler is an Erwin Musger designed two seat tandem trainer glider built in Austria and first flown in 1951. Several examples of this successful aircraft, which competed in the two seat class at two World Gliding Championships in the 1950s, were still flying in 2000.