Slingsby T.25 Gull 4

Slingsby T.25 Gull 4
Role	Glider
National origin	England
Manufacturer	Slingsby
Designer	Mungo Buxton, John Sproule, Fred Slingsby and Peter Shaw
First flight	late 1947
Number built	4

Last updated December 22, 2023

The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.

Development

After the Second World War Slingsby wished to produce a 15 m (49.2 ft) high-performance sailplane to be used in the Olympic games. The German DFS Meise, renamed Olympia, had already been chosen as the standard aircraft for the abandoned 1940 games and was produced in large quantities in several countries. The licence for the 'Olympia' was held by the Chilton Aircraft Company so Slingsby had no choice but to design his own version. Due to the identical specification and the use of state of the art construction the Gull 4 emerged with very similar features to the Olympia.

A replacement for the Kite 2 was proposed as the T.32 Gull 4B, but this glider did not reach the hardware stage.

Design

The fuselage was of semi-monocoque wooden construction with plywood skinning throughout over longerons and built up frames, most of which were shared with the Slingsby T.26 Kite 2.

The wing was mounted on a narrowed pylon which faired into the cockpit canopy, reducing interference drag between fuselage and wing. A rubber sprung nose skid, landing wheel and sprung tail-skid completed the undercarriage. A large comfortable cockpit with an upright seat was covered by a canopy made from blown plexiglas, providing excellent visibility but sometimes giving a poor fit.

The cantilever two-part wing had a rectangular centre section and tapering outer sections from approximately ⅓-span. A thickened Göttingen 549 section was chosen for the wing root transitioning to Göttingen 549^{[ clarification needed ]} at the fourth rib then to NACA 0009 at the tip with 5° wash-out at the tips. Large DFS-style airbrakes opening from the top and bottom surfaces aft of the main spar provided adequate approach control. Ailerons were fitted to the trailing edge over the outer ⅓-span. Constructed entirely of wood with steel fittings the single-spar wings had plywood-covered torsion boxes forming the leading edges, and fabric covering aft of the mainspars.

The fin was integral with the fuselage and also skinned with plywood. The tailplane was built up with wooden ribs and plywood leading edges stiffened with internal diagonal braces. The prototype was built with an adjustable tailplane for trimming but this was soon changed to a trim tab on the elevator.

Operational history

Flight trials of the Gull 4 began in late 1947 revealing no major vices and very similar, if not superior, handling to the Olympia. Performance was superior, a measured L/D ratio of 24.2:1 compared very favourably with the Olympia's L/D ratio of 22.5:1, and minimum sink speeds were similar.

Samedan 1948

Two Gull 4s were prepared for the International gliding championships to be held at Samedan in the Swiss Alps in July 1948, joining two Elliott Olympias, and two Weihes from RAF clubs in Germany. Philip Wills and Christopher Nicholson flew the two Gull 4s, during a disastrous competition where Nicholson flying a Gull 4 and Greig flying an Olympia were both killed flying in challenging conditions in the Alps. Wills flying the other Gull 4 missed fourth place overall due to a barograph failure during the first day's task, later establishing a British National speed record for the 100 km triangle at 47 km/h (29.2 mph).

After Samedan

The aircraft flown by Wills was exported to Australia and made a phenomenal climb in cloud to 23,500 ft without oxygen, the pilot was forced to land in trees, when he emerged from the cloud at around 30 m (100 ft), wrecking the aircraft. Re-built the Australian Gull 4 continued flying until a winch launching accident caused extensive damage, the wreckage is stored at Tocumwal. The prototype was bought by the London Gliding Club at Dunstable, flying National competitions in 1949 and 1950; after a crash on the Dunstable hill-side the wings were fitted to a Slingsby Kite 2 fuselage. The last Gull 4 was purchased by the RAFGSA and flew with the Moonrakers Club, took part in the 1950 Internationals in Sweden, where its canopy parted company, but despite a new canopy being flown in, results were disappointing. This aircraft succumbed to an accident in 1966.

Specifications (Slingsby T.25 Gull 4)

Data fromSlingsby Sailplanes,^[1]The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde^[2]

General characteristics

Crew: 1
Length: 23 ft 9 in (7.25 m)
Wingspan: 49 ft 3 in (15 m)
Wing area: 156.0 sq ft (14.49 m²)
Aspect ratio: 15.6
Airfoil: Göttingen 549 thickened - Göttingen 549 – NACA 0009
Empty weight: 467 lb (211.8 kg) equipped
Max takeoff weight: 700 lb (317.5 kg)

Performance

Stall speed: 35 mph (56 km/h, 30 kn)
Never exceed speed: 120 mph (193 km/h, 104 kn)
Aerotow speed: 70 mph (110 km/h; 61 kn)
Winch launch speed: 60 mph (97 km/h; 52 kn)
g limits: +7.75
Maximum glide ratio: 24 at 46 mph (74 km/h; 40 kn)
Rate of sink: 156 ft/min (0.79 m/s) at 42 mph (68 km/h; 36 kn)
Wing loading: 4.6 lb/sq ft (22.3 kg/m²)

Related Research Articles

The DFS Olympia Meise was a German sailplane designed by the Deutsche Forschungsanstalt für Segelflug (DFS) for Olympic competition, based on the DFS Meise.

The Schleicher K 8 is a single-seat glider designed by Rudolf Kaiser and built by the Alexander Schleicher company of Germany.

The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.

The Slingsby T.37 Skylark 1 was a small low-cost sailplane built during 1952-3 at Kirbymoorside, Yorkshire by Slingsby Sailplanes.

The PIK-3 was a sailplane produced in Finland in the 1950s and 60s. It was designed to be a cheap and easy-to-build aircraft to equip the country's gliding clubs as their standard single-seat machine. It was a conventional design for its day, with a high wing and conventional empennage. Construction was of wood throughout, skinned in plywood.

The Slingsby T.6/T.23 Kirby Kite was a single-seat sport glider produced from 1935, by Fred Slingsby in Kirbymoorside, Yorkshire.

The Slingsby T.12 Gull was a British single-seat glider designed and built by Slingsby Sailplanes and first flown in 1938.

The SZD-12 Mucha 100 was a single-seat glider aircraft that was designed and built in Poland from 1953.

The Eon Olympia was a glider produced from 1947 by Elliotts of Newbury.

The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.

<span class="mw-page-title-main">Slingsby Prefect</span> British single-seat glider, 1948

The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.

The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.

The Slingsby T.13 Petrel was a British single-seat competition glider built by Slingsby Sailplanes just before World War II.

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

The DFS Weihe is a German single-seat, high-wing, 18 metre wingspan, high-performance glider that was designed by Hans Jacobs in 1937-38.

The Ikarus Košava is a two-seat sailplane designed and built in Yugoslavia in the early 1950s. It won the 1954 World Gliding Championships in the two seat category and came second in the same event two years later.

The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.

The Kometa-Standard was a Standard Class glider, designed and built in Bulgaria in the early 1960s. Thirty were flown by local gliding clubs.

The IS-4 was a high performance glider designed by Iosif Şilimon and built in Romania in the late 1950s at the URMV-3 factory at Braşov.

The Schleicher Ka-2 Rhönschwalbe is a tandem two-seat training glider designed and built in Germany, in 1952.

References

Notes

↑ Simons, Martin (1996). Slingsby Sailplanes (1st ed.). Shrewsbury: Airlife. pp. 126–133. ISBN 1 85310 732 8.
↑ Shenstone, B.S.; K.G. Wilkinson; Peter Brooks (1958). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs dans Le Monde (in English, French, and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 124–128.

Bibliography

Shenstone, B.S.; K.G. Wilkinson; Peter Brooks (1958). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs dans Le Monde (in English, French, and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 124–128.
Simons, Martin (1996). Slingsby Sailplanes (1st ed.). Shrewsbury: Airlife. pp. 126–133. ISBN 1 85310 732 8.

External links

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[Simons-1] Simons, Martin (1996). Slingsby Sailplanes (1st ed.). Shrewsbury: Airlife. pp. 126–133. ISBN 1 85310 732 8.

[Shenstone-2] Shenstone, B.S.; K.G. Wilkinson; Peter Brooks (1958). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs dans Le Monde (in English, French, and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 124–128.

[1]

[2]