Slingsby Falcon 4

Last updated

Falcon 4
IWM-ATP-14499B-Kirby-Cadet.jpg
Slingsby Falcon 4 (VM109)
RoleTraining glider
National origin United Kingdom
Manufacturer Slingsby Sailplanes Ltd.
First flightApril 1946
Number built3

The Slingsby T.24 Falcon 4 was a two-seat training glider designed in the UK just after World War II for ATC use. It was judged too expensive for production and only three were completed. [1]

Contents

Development

Despite the shared name, the Slingsby Falcon 4 was a completely different aircraft from the early Falcon 1, 2 and 3, all derived from the Schleicher Falke from about 1930 and notable for their swept wings. [2] In contrast, the Falcon 4 was a tandem seat training glider intended for an ATC role and built to Air Ministry specification TX.8/45. It used conventional wooden construction; all three Falcon 4s were built by Martin Hearn Ltd. of Hooton Park, Cheshire. [1]

The wing of the Falcon 4 was of quite low aspect ratio, with a straight, unswept leading edge, rounded copper bound tips and straight taper on the trailing edge. [1] The first two aircraft had flaps extending over almost all the trailing edge not occupied by the ailerons, but the third replaced flaps with spoilers. [3] The wings were pylon mounted with lift struts from the spar to the lower fuselage longerons. [1] The pylon only extended forward to the spar, leaving space for the rear, open, cockpit under the wing; the forward cockpit was close to the nose. Behind the wing the pylon dropped away gently above the flat sided fuselage to the tail. The braced, straight tapered tailplane was mounted on top of the fuselage and placed far enough forward that the divided elevators were ahead of the rudder hinge, avoiding the need for a large cut out for rudder movement. The fin was small, but the horn balanced rudder was generous in area, slightly pointed and with a rounded, copper bound trailing edge. The undercarriage was conventional, with a nose skid, fixed monowheel and small tailwheel. [1]

The first flight was in April 1946 and two other prototypes followed, but the aircraft was expensive to produce and offered no advantage over the Slingsby T.21 and no orders resulted. [1] [4] The second prototype was written off in an accident in December 1946, but in 1948, owing to delays in the T21 entering service, the remaining two Falcon 4s were tested in order to allow them to be cleared for service with the ATC. The third prototype was written off during these trials in August 1948, but in 1949, the remaining Falcon 4 entered service with the ATC gliding school at Detling. It was sold in March 1953. [5]


Specifications

Data from Ellison 1971, p. 194

General characteristics

Performance

Notes

  1. 1 2 3 4 5 6 Ellison 1971 , p. 194
  2. Ellison 1971 , pp. 172, 174, 194
  3. Ellison 1971 , p. 261
  4. Simons 1994 , p. 60
  5. Simons 1994 , pp. 60–61

Related Research Articles

The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.

The Slingsby T.1/T.2 Falcon or British Falcon) was a single-seat sport glider produced, in 1931–37, by Fred Slingsby in Scarborough, Yorkshire.

<span class="mw-page-title-main">Slingsby Sky</span> British single-seat glider, 1950

The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.

<span class="mw-page-title-main">Slingsby Prefect</span> British single-seat glider, 1948

The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.

The Slingsby Type 26 Kite 2 was a post World War II development of the Slingsby Kite, a single seat medium performance sailplane. It sold in small numbers.

<span class="mw-page-title-main">Slingsby Swallow</span> British single-seat glider, 1957

The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.

<span class="mw-page-title-main">Slingsby Skylark 3</span> British single-seat glider, 1957

The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.

<span class="mw-page-title-main">Slingsby Petrel</span> British single-seat glider, 1938

The Slingsby T.13 Petrel was a British single-seat competition glider built by Slingsby Sailplanes just before World War II.

<span class="mw-page-title-main">Slingsby Skylark 4</span> British competition glider, 1961

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

The Buxton Hjordis was a single-seat sailplane built by Slingsby Sailplanes Ltd. in the UK to a design by G.M Buxton. Only one was constructed and was flown by Philip Wills at competitions in Europe between 1935-7.

<span class="mw-page-title-main">EoN 460</span> British series of wooden sailplanes, 1960s

The EoN 460 series are wooden single-seat standard class sailplanes, built in the UK in the 1960s. It did not have major competition success but some remain in use in 2021.

<span class="mw-page-title-main">Abbott-Baynes Scud 2</span> British single-seat glider, 1932

The Abbott-Baynes Scud 2 was a 1930s high-performance sailplane, built in the UK. It was a development of the intermediate-level Scud 1 with a new, high aspect ratio wing.

The Addyman Zephyr was a one-off, single-seat sailplane designed and built by Erik Addyman in the UK for his own use in the 1930s.

The Dart Cambridge was a single-seat competition sailplane built in the United Kingdom in the 1930s. A development of the Grunau Baby, only two were built, flying with gliding clubs.

The Davis-Costin Condor was a conventional all-wood, tandem-seat sailplane built in the United Kingdom in the 1950s. Only one was constructed; it was later rebuilt with a longer fuselage and other detailed alterations as the Condor 2.

<span class="mw-page-title-main">Manuel Wren</span> British single-seat glider, 1931

The Manuel Crested and Willow Wrens formed a series of wooden, single-seat gliders designed in the UK by W. L. Manuel in the early 1930s, intended for slope soaring. Some were built by the designer, others from plans he supplied. The Dunstable Kestrel was a further development.

The Nyborg T.G.N.1 was a single-seat experimental sailplane built in the early 1930s, its unusual wing design a scaled-up version of the wings of large birds.

The Stedman TS-1 City of Leeds was a parasol wing wooden sailplane, seating two in tandem open cockpits. Only one was built, by its designer in 1934; it remained active until the outbreak of World War II.

<span class="mw-page-title-main">RRG Falke</span> German single-seat glider, 1930

The RRG Falke of 1930 was a secondary training glider designed by Alexander Lippisch in Germany and intended to provide better performance than his earlier RRG Prüfling whilst being easier to fly because of its inherent stability. It was sold as plans for both club and commercial production and was built in Germany and abroad.

The Musger Mg 9 was a tandem two seat glider built in Austria in the mid-1930s. It broke both world and national records.

References