| Dart | |
|---|---|
 | |
| Dart 17R | |
| Role | Single seat competition sailplane |
| National origin | United Kingdom |
| Manufacturer | Slingsby Sailpalnes Ltd |
| First flight | 26 November 1963 |
| Number built | 82 |
The Slingsby Type 51 Dart is a single seat competition glider designed in the early 1960s, initially as a 15 m span Standard Class aircraft but evolved into an Open Class, 17 m sailplane. It was the last Slingsby sailplane to be mostly constructed of wood.
The Slingsby Dart was the last of a long line of gliders and sailplanes built by Slingsby Sailplanes Ltd almost entirely from wood. From the Slingsby Skylark 2 of 1953 onwards, the company had used Gaboon ply, thicker but less dense than the traditional birch [1] for surfacing wings and fuselage, as it gave a smoother surface capable of maintaining the more demanding profiles of the newer aerofoils. [2] The Capstan flew ten years later with double curvature parts of the fuselage skin produced from glass-reinforced plastic (G.R.P). [3] Combined, these were the construction methods initially used for the Dart. [4]
The Dart was originally a 15 m sailplane, aimed immediately at the 1964 UK Gliding Championships and beyond at the 1965 World Championships. [5] Its wings were shoulder mounted, with 2o dihedral and about 0.75o forward sweep at quarter chord. They were built around spruce spars with a plywood covered torsion box ahead to the leading edge, fabric covered behind and with plywood covered ailerons. The mid-chord airbrakes were arranged as pairs above and below the wings. [6]
The fuselage seemed notably long and slender at the time, and the tail unit small. [5] It was a semi-monocoque spruce structure, plywood covered apart from the G.R.P in the cockpit area, with the single piece canopy hinged on the starboard side. The original tail unit was again a spruce structure with G.R.P. leading edges, its all moving tailplane mounted low on the fin, [6] [7] though later aircraft used a metal framed tailplane. [4] The rudder and the rear part of the tailplane were fabric covered, the latter carrying trim tabs. On early aircraft the undercarriage was a non-retractable single wheel placed under the leading edge of the wing, plus a short skid under the nose and a tail bumper. [6] [7]
The Dart first flew on 26 November 1963. [6] Four were entered into the National Gliding Competition in May 1964, but failed to impress in the light conditions of the first few days. [8] It became increasingly clear that the speed of the Dart could not compensate in typical English conditions for the high minimum sink rate resulting from its high wing loading of 5.6 lb/sq ft (27.3 kg/m2). Since the 1965 World Championships were also scheduled for the UK, Slingsby decided to increase the wing area by stretching the span to 17 m, making the Dart an entrant for the Open Class. Initially this version also had a wooden wing spar, but some distortion noticed when the airbrakes were extended led to a redesigned spar of mixed metal and wood construction. The new wing was also fitted with a trailing edge root extension and a 1 ft (0.305 m) increase in aileron length and this version of the Dart became known as the Dart 17. The first Dart 17 used an undercarriage with a less extended wheel, fitted in a fairing but almost all [9] later ones were fitted with a retracting undercarriage. [7] The later Dart 15s used a similar metal and wood spar and had the root fillet, producing a net weight saving of 45 lb (21 kg) and a corresponding improvement in sink rate. [7] Most Dart 15s retained the fixed wheel undercarriage [9] to allow them to compete as Standard Class. Darts with retractable gear are known as the 17R.
The 1965 World Championships saw only modest success for the Darts: a Dart 15 finished 5th in the Standard Class event and the Dart 17 came 7th in the Open Class. [10] 82 complete Darts of both spans are known to have been built. Overall, rather more of the large-span Darts were made. [11] One had removable wing tips, so it could fly in either class. [11] Two special Dart 15s, designated Dart 15W were produced for the Standard Class at the 1968 World Championships with wings using a new aerofoil section and a revised canopy. [4] After the competition, in which they were not highly placed, [12] their wings were extended to 17 m and they were redesignated Dart 17W; later fitted with the retractable undercarriage, they became 17WRs. Several Darts were built from kits in New Zealand and flew there. [11] Others were exported to Burma, Canada, Rhodesia, [11] Switzerland and the USA. [9]
The first Dart, now G-DBSA is now in the historic gliding collection at Lasham. The two 17WRs, registered G-DCAZ and G-DCBA have restricted certificates of airworthiness valid into 2015. [13] [14] Many others are still flying, mostly in the UK but with a few in the rest of Europe and in the USA.
From Ellison 1971 , pp. 219–220
Data from Ellison 1971, pp. 219–220
General characteristics
Performance
Related lists
The T.31 Tandem Tutor is a British military training glider, designed and built by Slingsby and used in large numbers by the Air Training Corps between 1951 and 1986.
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.
The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.
The Slingsby Type 26 Kite 2 was a post World War II development of the Slingsby Kite, a single seat medium performance sailplane. It sold in small numbers.
The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.
The Slingsby T.24 Falcon 4 was a two-seat training glider designed in the UK just after World War II for ATC use. It was judged too expensive for production and only three were completed.
The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.
The Slingsby T.13 Petrel was a British single-seat competition glider built by Slingsby Sailplanes just before World War II.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Dart Cambridge was a single-seat competition sailplane built in the United Kingdom in the 1930s. A development of the Grunau Baby, only two were built, flying with gliding clubs.
The Dart Totternhoe was a single-seat secondary training glider produced in the United Kingdom in the 1930s. Three were built, one serving in the RAF.
The Davis-Costin Condor was a conventional all-wood, tandem-seat sailplane built in the United Kingdom in the 1950s. Only one was constructed; it was later rebuilt with a longer fuselage and other detailed alterations as the Condor 2.
The Akaflieg Darmstadt D-34 sailplanes were a series of experimental single seat sailplanes, designed at the University of Darmstadt in the 1950s and early 1960s to explore the structural and aerodynamic advantages of the then emerging plastics and composite materials.
The Akaflieg Braunschweig SB-12 is a single seat, Standard Class sailplane designed around 1980 by German technical university students to test out a new wing profile from the German Aerospace Centre. It was not intended for production, but the sole SB-12 remains active in 2010.
The FVA-20 F. B. Schmetz was a single seat, Standard Class sailplane, built as a one-off aircraft, to explore the application of glass fibre to glider construction. Built over a long period, it finally flew in late 1979.
The Ikarus Meteor is a long-span, all-metal sailplane designed and built in Yugoslavia in the 1950s. It competed in World Gliding Championships (WGC) between 1956 and 1968 and was placed fourth in 1956; it also set new triangular-course world speed records.
The Sunderland MOBA 2 was a single seat glider built in Australia in the 1970s. It was constructed from a mixture of metal, wood and synthetic material and had some unconventional features such as side-stick control, and a nosecone which rolled forward on rails for pilot access.
The Bonomi BS.19 Alca was a single seat, tractor configuration motor glider, designed and built in Italy shortly before World War II. It had an unusual retractable undercarriage used only for take-offs. Only one was built.
The RRG Falke of 1930 was a secondary training glider designed by Alexander Lippisch in Germany and intended to provide better performance than his earlier RRG Prüfling whilst being easier to fly because of its inherent stability. It was sold as plans for both club and commercial production and was built in Germany and abroad.
