| T.12 Gull | |
|---|---|
 | |
| The sixth Gull I at Great Hucklow in 1949 when operated by the Derbyshire & Lancashire Gliding Club | |
| Role | Glider |
| National origin | United Kingdom |
| Manufacturer | Slingsby Sailplanes |
| Designer | Fred Slingsby |
| First flight | March 1938 |
| Number built | 11 |
The Slingsby T.12 Gull was a British single-seat glider designed and built by Slingsby Sailplanes and first flown in 1938.
In the late 1930s the gliding movement in the UK did not receive the support from the government that was forthcoming in other European states. Fred Slingsby designed the Type 12 Gull to be relatively inexpensive and easy to fly in the hands of the inexperienced pilots in the UK. Slingsby had had a bad experience with the Type 9 King Kite entering incipient spins at low airspeed which was ascribed to the use of a NACA 4312 aerofoil section at the wing-tips, so he designed the Gull with a modified RAF 34 profile at the tips. The cause of the wing drop problem on the King Kite was later found to be inaccurate manufacture, but the Gull retained the modified RAF 34 section.
Construction of the Gull aircraft was of semi-monocoque wood and plywood throughout, with a mixture of plywood and fabric skinning and covering. The wings were skinned with plywood forward of the main spar to form torsion boxes which increased their rigidity. They had a distinctive gull wing form, as the inner 2 metres carried marked dihedral out to the attachment points of the lift struts to the wing spars. Beyond, the wings lacked dihedral. The rectangular planform of the inner wings included the gulled portion and 2 metres beyond, with spoilers in the upper surface outboard of the gull joint in some later aircraft. Ailerons filled the trailing edge of the tapered outer wings.
The cockpit was enclosed with a neatly faired multi-panel canopy which was removed for entry and egress. Ten Gulls were built, nine by Slingsby at Kirbymoorside and one by Herman Kursawe in the United States, from plans supplied by Slingsby.
The design was developed in 1939 to include what Slingsby called the cantilever Gull, designated as the T15. More commonly known as the Gull III, it had a slightly higher performance, and was fitted with spoilers on the upper surfaces of the wing. Built in 1939, it was not until January 1940 that the type first flew, and was such a success that Slingsby intended to put the type into production once the War was over.
With the tight post-war economy within Britain, gliders of simplified production quickly became a factor in being able to produce cost-effective sailplanes. This led to the Gull 4, which had a more conventional, less complicated straight wing.
In 1939 a Gull, widely known as the Blue Gull became the first glider to fly from England to France, cross channel. The pilot was G. Stephenson. [1]
The only Gull III to be built survived the war, and along with the Petrel was regarded as one of the prettiest sailplanes to come out of Slingsby's doors.[ citation needed ] It went on to have a long and distinguished career, and was owned at one point by Prince Bira of Siam, who was at the time the World Motor Racing Champion. Bira had bought the Gull III in 1944 and flew it in the company of his dog, a small white West Highland Terrier called "Titch", on many epic flights, including one to 12000 ft.
The Gull III was later bought by a syndicate at the Oxford Gliding Club operating out of Weston on the Green. After a long rebuild, it was finally flown again in 1973. Its C of A expired again in July 1974 because its wing had been damaged by damp (casein glue failure) during the previous winter, when it had been left out in its closed trailer at St. Mary's Farm, Clifton, near Deddington, Oxon. Expertly restored in the 1980s by the late Mike Beach, it was initially loaned to Brooklands Museum as a non-flying exhibit but was later bought by the Museum in 1998.
There is one other Gull III in existence. Often wittingly referred to as the Gull 3 ½, this Gull is a faithful replica that was made from drawings that had come from Slingsby's during the 1970s, with the drawings being developed for the project by a worker at Slingsby's. The project was the brain-child of the late Mike Garnett, and completed by members of the Bowland Forest Gliding Club. It flew from Bowland Forest until 2011 when it was purchased by the current owner and moved to Lincolnshire. This Gull is currently the only airworthy example of either the Gull 1 or Gull III left in Britain. The only other airworthy Gull 1 went to the United States in 2010.
Data fromSlingsby Sailplanes [7] and The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde [8]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The DFS Olympia Meise was a German sailplane designed by the Deutsche Forschungsanstalt für Segelflug (DFS) for Olympic competition, based on the DFS Meise.
The Akaflieg Stuttgart fs24, nicknamed Phönix, was a glider designed and built in West Germany from 1951.
The Schneider Grunau Baby was a single-seat sailplane first built in Germany in 1931, with some 6,000 examples constructed in some 20 countries. It was relatively easy to build from plans, it flew well, and the aircraft was strong enough to handle mild aerobatics and the occasional hard landing. When the Baby first appeared, it was accepted wisdom that the pilot should feel as much unimpeded airflow as possible, to better sense rising and falling currents of air and temperature changes etc.
The Slingsby T.21 is an open-cockpit, side-by-side two-seat glider, built by Slingsby Sailplanes Ltd and first flown in 1944. It was widely used by the Royal Air Force, Sri Lanka Air Force and by civilian gliding clubs.
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Slingsby T.37 Skylark 1 was a small low-cost sailplane built during 1952-3 at Kirbymoorside, Yorkshire by Slingsby Sailplanes.
The PIK-3 was a sailplane produced in Finland in the 1950s and 60s. It was designed to be a cheap and easy-to-build aircraft to equip the country's gliding clubs as their standard single-seat machine. It was a conventional design for its day, with a high wing and conventional empennage. Construction was of wood throughout, skinned in plywood.
The Slingsby T.6/T.23 Kirby Kite was a single-seat sport glider produced from 1935, by Fred Slingsby in Kirbymoorside, Yorkshire.
The Slingsby T.8 Kirby Tutor was a single-seat sport glider produced from 1937, by Fred Slingsby in Kirbymoorside, Yorkshire.
The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.
The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.
The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.
The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.
The Slingsby T.13 Petrel was a British single-seat competition glider built by Slingsby Sailplanes just before World War II.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Johnson RHJ-6 Adastra was an American mid-wing, two-seat glider that was designed and constructed by Dick Johnson and first flown on 3 April 1960.
The Ikarus Košava is a two-seat sailplane designed and built in Yugoslavia in the early 1950s. It won the 1954 World Gliding Championships in the two seat category and came second in the same event two years later.
The Kometa-Standard was a Standard Class glider, designed and built in Bulgaria in the early 1960s. Thirty were flown by local gliding clubs.
The UTG-1 Loudon was an intermediate glider designed and built at the University of Toronto in Canada during the late 1940s.
The IS-4 was a high performance glider designed by Iosif Şilimon and built in Romania in the late 1950s at the URMV-3 factory at Braşov.
