| Sky | |
|---|---|
 | |
| Role | Single seat competition sailplane |
| National origin | United Kingdom |
| Manufacturer | Slingsby Sailplanes Ltd., Kirkbymoorside, Yorkshire |
| Designer | F. N. Slingsby |
| First flight | September 1950 |
| Number built | 16 |
The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.
The single seat Slingsby Sky resulted from Slingsby's experience at the 1948 International Gliding Contests, where they flew their 15 m span Gull IV. This convinced them that to be competitive against aircraft like the German DFS Weihe, the Gull's successor would have to have a span of 18 m or more. Consequently, the Sky was aerodynamically identical to the Gull IV apart from span (and hence aspect ratio) and length, though it differed in construction. [1] It dominated the 1952 Contests and was well placed in both 1954 and 1956.
The Sky is a wooden aircraft, using the traditional spruce for stressed members and birch ply elsewhere. Its wing has a constant chord inner section over the first 30% of span, then tapers on both edges to a rounded tip. The 20% increase in span over the Gull IV was achieved with two extra rib bays in the inner part and a 2 in (51 mm) increase in rib separation outboard. The Sky was designed to meet semi-aerobatic requirements which together with an aspect ratio of 18.7, which was high for the time, required the single box spars, 6 in (152 mm) wide at their greatest, to be massive. Their weight is 25% of that of the whole aircraft. The wing ahead of this spar, positioned at 30% chord, forms a plywood covered torsion box. Behind it, the wing is fabric covered. Ailerons, divided to allow for wing flexure, fill the tapered trailing edges. Air brakes are mounted on the spars as aerodynamically balanced pairs above and below wing; the lower panel open into the airstream and lever the upper ones against it. [1] There were no flaps. [2]
The cockpit of the Sky is of standard Slingsby design and built on the same jigs as those used on the Gull IV and Kite II, with a single piece perspex canopy hinged on the starboard side. It is placed immediately in front of the leading edge of the wing and the fuselage neck on which the wing is mounted. Behind the cockpit the fuselage is a semi-monocoque structure, with a stress bearing 1/16 in (1.6 mm) plywood skin formed over light frames positioned by three longitudinal stringers. There is additional strengthening around the wheel bay, where the single wheel has its axle held clear of the fuselage by small triangular pieces. An ash skid is mounted away from the fuselage, running forward to the nose. The wheel brake is applied at the greatest air brake extension. As a weight saving alternative to the mono-wheel, a jettisonable two wheel dolly can be used for take-off. Another ash skid at the rear forms a bumper. The tail unit was initially identical to that of the Gull IV: the tailplane has a ply covered leading edge and fabric behind, mounted forward of the ply covered fin so that the rudder hinge is in line with the trailing edge of the single piece, fabric covered elevator. The latter carries trim tabs. [1]
The Sky first flew in September 1950. Trials led to readjustment of the centre of gravity and the replacement of the Gull IV rudder with an aerodynamically balanced one of greater chord. The airbrakes were also increased in area and their linkage revised to ensure the Sky did not exceed its design terminal speed in dives, and to make the brakes easier to close at higher speeds. [1]
Slingsby designed an improved version of the Sky, designated Type 34B Sky 2 for the 1954 World Competition, but did not build it. It would have had laminar flow wings with square tips and a revised, squared off tail. [2]
The prototype Sky was one of the exhibits at the Festival of Britain held in May 1951.
The first two Skys had immediate success in 1951 in the English championships held at Camphill, Derbyshire, coming in first and second. [3] More significant was their dominance of the World Gliding Championships held the following year at Madrid in Spain. Eight Skys were entered, five by the British team, two by Argentina and one by the Netherlands. [4] One British Sky was forced to retire after the first day, [5] but Final placings put all seven remaining Skys in the top fourteen out of thirty-nine, and they claimed first, third and fourth places. [5] Skys continued to do well in later Championships, with second place in both 1954 [6] and 1956. [7]
A Swiss Sky was flown across the Alps from Bern to Béziers in France in 1955 by Hans Nietlispach, a distance of 536.2 km (333.2 mi) [8] which still stands as the Swiss straight line record. [9]
Sixteen Skys were built; [10] of these, six still fly in the UK, including the Swiss record holder, and one in the Netherlands; [11] two others are under restoration. [11] One Sky (EC-RAT) is a non-flying exhibit in the Museo del Aire (Spain). [12]
Data from Ellison 1971, p. 203, The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde [13] [14]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists List of gliders
The DFS Olympia Meise was a German sailplane designed by the Deutsche Forschungsanstalt für Segelflug (DFS) for Olympic competition, based on the DFS Meise.
The Aer-Pegaso M-100 was a single-seat glider designed and built in Italy from 1967.
The Slingsby T.21 is an open-cockpit, side-by-side two-seat glider, built by Slingsby Sailplanes Ltd and first flown in 1944. It was widely used by the RAF, Sri Lanka Air Force and by civilian gliding clubs.
The Slingsby T.41 Skylark 2 was a sailplane produced from 1953 by Slingsby Sailplanes at Kirkbymoorside, Yorkshire.
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Slingsby T.37 Skylark 1 was a small low-cost sailplane built during 1952-3 at Kirbymoorside, Yorkshire by Slingsby Sailplanes.
The Slingsby T.6/T.23 Kirby Kite was a single-seat sport glider produced from 1935, by Fred Slingsby in Kirbymoorside, Yorkshire.
The Slingsby T.8 Kirby Tutor was a single-seat sport glider produced from 1937, by Fred Slingsby in Kirbymoorside, Yorkshire.
The Slingsby T.12 Gull was a British single-seat glider designed and built by Slingsby Sailplanes and first flown in 1938.
The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.
The Eon Olympia was a glider produced from 1947 by Elliotts of Newbury.
The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.
The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.
The Slingsby T.13 Petrel was a British single-seat competition glider built by Slingsby Sailplanes just before World War II.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Ikarus Košava is a two-seat sailplane designed and built in Yugoslavia in the early 1950s. It won the 1954 World Gliding Championships in the two seat category and came second in the same event two years later.
The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.
The Ikarus Meteor is a long-span, all-metal sailplane designed and built in Yugoslavia in the 1950s. It competed in World Gliding Championships (WGC) between 1956 and 1968 and was placed fourth in 1956; it also set new triangular-course world speed records.
The Győr-2 was a high performance sailplane designed and built at the Aircraft Designer and Builder Group, Aeroclub of the Rolling-stock Factory, Győr in Hungary in the early 1950s.
The Bruni 3V-1 Eolo was a single seat Italian competition glider, first flown in 1955. It took part World Gliding Championships of 1956 but retired early after sustaining damage.
 | Wikimedia Commons has media related to Slingsby gliders . |