| T.31B Tandem Tutor | |
|---|---|
 | |
| Role | Training glider |
| National origin | United Kingdom |
| Manufacturer | Slingsby Sailplanes Ltd |
| First flight | 1949 |
| Primary user | Royal Air Force |
| Number built | ca. 230 |
| Developed from | Slingsby Tutor |
The T.31 Tandem Tutor is a British military training glider, designed and built by Slingsby and used in large numbers by the Air Training Corps between 1951 and 1986.
The T.31 was a tandem two-seat development of the T.8 Tutor (RAF Cadet TX.2). The fuselage was based on that of the T.29 Motor Tutor, increased in length and widened slightly; the wings and tail were unchanged. A single T.31A prototype was flown in 1949, followed by the production T.31B, with spoilers and a small additional wing bracing strut.
Chief customer for the T.31B was the Royal Air Force for Air Cadet training; its aircraft were designated as Cadet TX Mark 3. As it was so similar to their existing single-seaters, it allowed easy conversion to solo. The RAF took delivery of 126 TX.3s between 1951 and 1959.
It also found a market with civilian clubs in the UK, although most of these were built from kits and spares, using existing Tutor wings. T.31s were exported to Burma, Ceylon, Israel, Jordan, Lebanon, Pakistan and Rhodesia. In addition, small numbers were built in Argentina, Israel and New Zealand. [1] The T.35 Austral was a one-off development with span increased to 15.64 m (51 ft 3¾ in), [2] sold to the Waikerie Gliding Club in Australia in 1952
After the RAF Cadet TX.3s were replaced by GRP gliders in the mid-1980s, the fleet was sold off, but never gained the same popularity with civilian owners as the side-by-side T.21, being a cheaper glider designed for "circuits and bumps", and only marginally soarable. Some were instead converted to simple ultra-light aircraft as Motor Cadets, with the front cockpit replaced by a Volkswagen or similar engine, and a three-point undercarriage.
Royal Air Force Museum, Hendon.
RAF Manston History Museum has Slingsby Cadet TX.3 VM791 on display marked up as XA312
United Kingdom Data from Coates, Andrew. "Jane's World Sailplanes & Motor Gliders new edition". London, Jane's. 1980. ISBN 0-7106-0017-8
General characteristics
Performance
Related development
Related lists
The ASK 21 is a glass-reinforced plastic (GRP) two-seat glider aircraft with a T-tail. The ASK 21 is designed primarily for beginner instruction, but is also suitable for cross-country flying and aerobatic instruction.
Slingsby Aviation was a British aircraft manufacturer based in Kirkbymoorside, North Yorkshire, England. The company was founded to design and build gliders and sailplanes. From the early 1930s to around 1970 it built over 50% of all British club gliders and had success at national and international level competitions. It then produced some powered aircraft, notably the composite built Firefly trainer, before becoming a producer of specialised composite materials and components.
The SZD-45 Ogar (Hound) is a T-tailed cantilever high-wing monoplane of wooden, aluminium and fibreglass construction designed and manufactured in Poland.
The Slingsby T.38 Grasshopper is a British primary training glider built by Slingsby Sailplanes for the Royal Air Force.
The Schweizer SGS 2-33 is an American two-seat, high-wing, strut-braced, training glider that was built by Schweizer Aircraft of Elmira, New York.
The G103 Twin II is a high-performance two-seat sailplane manufactured in Germany by Grob Aircraft. The aircraft is of T-tail configuration, and is fitted with upper-surface airbrakes and a non-retractable undercarriage. Of fiberglass construction, it is designed for training, high performance cross-country racing and simple aerobatic flying.
The Vickers-Slingsby T-65 Vega is a 15-metre class class glider which first flew on 3 June 1977. Of fibreglass construction, it features linked camber-changing flaps and airbrakes, and a retractable main and tailwheel.
The Schneider Grunau Baby was a single-seat sailplane first built in Germany in 1931, with some 6,000 examples constructed in some 20 countries. It was relatively easy to build from plans, it flew well, and the aircraft was strong enough to handle mild aerobatics and the occasional hard landing. When the Baby first appeared, it was accepted wisdom that the pilot should feel as much unimpeded airflow as possible, to better sense rising and falling currents of air and temperature changes etc.
The Elliots Primary EoN or EoN Type 7 S.G.38 Primary was a training glider built in the UK shortly after World War II. It was an absolutely minimalist aircraft, consisting of a high, cable-braced wing connected to a conventional empennage by an open-truss framework, and was a copy of the German SG 38 Schulgleiter. Marketed to aeroclubs, the Primary EoN was also adopted in 1948 by the Air Training Corps and by the Combined Cadet Force under the name Eton TX.1. An example is at the Gliding Heritage Centre.
The ICA IS-28 is a two-seat sailplane produced in Romania in the 1970s. An all-metal aircraft of conventional design with a T-tail, it was originally produced with 15-metre wings, but in 1973, production shifted to the IS-28B with 17-metre wings and numerous aerodynamic refinements. These included a smaller tail with decreased dihedral, decreased dihedral on the wings, and redesigned fuselage contours. This version first flew on 26 April 1973 and was subsequently produced in versions with flaps (IS-28B2) and without (IS-28B1). Around 100 had been built by the early 1980s, with a substantial number sold for export. On April 7, 1979, Tom Knauff and R. Tawse set a world record with the IS-28 B2 glider, covering a distance of 829 kilometres on a predetermined out-and-return course from the Ridge Soaring Gliderport in Julian, Pennsylvania.
The HP-14 is a Richard Schreder-designed all-metal glider aircraft that was offered as a kit for homebuilding during the 1960s and 1970s. It was originally developed by retrofitting improved wings to the fuselage and tail of the HP-13, and first flew in 1966. Schreder won the 1966 US national soaring championship in the prototype HP-14.
The Slingsby T.7 Kirby Cadet is a British training glider designed and built by Slingsby that first flew in 1935 and saw service with the Royal Air Force for use by the Air Training Corps as the Cadet TX.1 throughout the 1950, 1960s and 1970s.
The Slingsby T.21 is an open-cockpit, side-by-side two-seat glider, built by Slingsby Sailplanes Ltd and first flown in 1944. It was widely used by the Royal Air Force, Sri Lanka Air Force and by civilian gliding clubs.
The Slingsby T.9 King Kite is a British glider designed and built by Slingsby that first flew in 1937.
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Slingsby T.29 Motor Tutor was a single-seat motor glider produced from 1948, by Slingsby Sailplanes in Kirbymoorside, Yorkshire.
The Slingsby T.8 Kirby Tutor was a single-seat sport glider produced from 1937, by Fred Slingsby in Kirbymoorside, Yorkshire.
The Slingsby T.12 Gull was a British single-seat glider designed and built by Slingsby Sailplanes and first flown in 1938.
The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.
The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.
