| T.3 Dagling | |
|---|---|
 | |
| Original RRG Zögling 1931. | |
| Role | Primary training glider |
| National origin | United Kingdom |
| Manufacturer | Slingsby Sailplanes |
| Designer | Reginald Foster Dagnall |
| Number built | at least 67 (by Slingsby) |
| Developed from | Lippisch Zögling |
The Slingsby T.3 Primary (a.k.a. Dagling) was a single-seat training glider produced in the 1930s by Fred Slingsby in Kirbymoorside, Yorkshire.
During the 1920s Alexander Lippisch designed a training glider with very low performance to introduce pilots gradually to full-blown gliding. The result was a glider with a very simple structure of an open framework fuselage, with short wings attached by cables to a king post and the base of the fuselage. Lippisch's original design, the Zögling (Pupil in English) had an all-wood fuselage but Wolf Hirth instigated a redesign of the rear fuselage using steel tubes.
The plans for the modified Zögling made their way via the United States to the London Gliding Club and Reginald Foster Dagnall, whose RFD company put it into production as the RFD Primary. They built 27 in 1930-31. The type became known as the Dagling, a name formed by combining Dagnall and Zögling, which later became used informally to cover all types of primary gliders in the UK. Fred Slingsby took over construction in 1934 and production continued up to the outbreak of World War II. The Primary should not be confused with the similar T.38 Grasshopper which was produced for the Air Training Corps in the 1950s.
 | This section is empty.You can help by adding to it.(July 2010) |
General characteristics
Performance
Related development
Aircraft of comparable role, configuration and era
Related lists
Primary gliders are a category of aircraft that enjoyed worldwide popularity during the 1920s and 1930s as people strove for simple and inexpensive ways to learn to fly.
The Schempp-Hirth Mini Nimbus is a 15 Metre-class glider designed and built by Schempp-Hirth GmbH in the late 1970s.
Dart Aircraft Limited was a British aircraft manufacturer during the 1930s. Its facilities were located at 29 High Street North, Dunstable, Bedfordshire.
The Schneider Grunau Baby was a single-seat sailplane first built in Germany in 1931, with some 6,000 examples constructed in some 20 countries. It was relatively easy to build from plans, it flew well, and the aircraft was strong enough to handle mild aerobatics and the occasional hard landing. When the Baby first appeared, it was accepted wisdom that the pilot should feel as much unimpeded airflow as possible, to better sense rising and falling currents of air and temperature changes etc.
The Elliots Primary EoN or EoN Type 7 S.G.38 Primary was a training glider developed in the UK shortly after World War II. It was an absolutely minimalist aircraft, consisting of a high, cable-braced wing connected to a conventional empennage by an open-truss framework, and was a copy of the German SG 38 Schulgleiter. Marketed to aeroclubs, the Primary EoN was also adopted in 1948 by the Air Training Corps and by the Combined Cadet Force under the name Eton TX.1.
Frederick 'Fred' Nicholas Slingsby MM was the founder of Slingsby Sailplanes Ltd.
The Slingsby T.21 is an open-cockpit, side-by-side two-seat glider, built by Slingsby Sailplanes Ltd and first flown in 1944. It was widely used by the RAF, Sri Lanka Air Force and by civilian gliding clubs.
The Slingsby T.37 Skylark 1 was a small low-cost sailplane built during 1952-3 at Kirbymoorside, Yorkshire by Slingsby Sailplanes.
The Slingsby T.8 Kirby Tutor was a single-seat sport glider produced from 1937, by Fred Slingsby in Kirbymoorside, Yorkshire.
The Slingsby T.12 Gull was a British single-seat glider designed and built by Slingsby Sailplanes and first flown in 1938.
The Slingsby T.1/T.2 Falcon or British Falcon) was a single-seat sport glider produced, in 1931-37, by Fred Slingsby in Scarborough, Yorkshire.
The W.W.S. 1 Salamandra (Salamander) was a single-seat training glider designed and built in Poland from 1936, and again from 1947 after World War II as IS-A Salamandra.
The IS-3 ABC was a single-seat training glider designed and built in Poland from 1947.
Reginald Foster Dagnall was a British engineer and aircraft designer.
The Zögling is a German high-wing, cable-braced, single seat primary glider that was designed by Alexander Lippisch in 1926 and produced with many variations by a variety of manufacturers.
The Jongblood Primary is an American single-seat, high-wing, strut-braced primary glider designed by Mike Jongblood of southern California and first flown in 1967. The aircraft is unusual in that primary gliders went out of fashion in the 1930s and few have been built since.
The RRG Falke of 1930 was a secondary training glider designed by Alexander Lippisch in Germany and intended to provide better performance than his earlier RRG Prüfling whilst being easier to fly because of its inherent stability. It was sold as plans for both club and commercial production and was built in Germany and abroad.
The 1926 German RRG Prüfling of 1926 was a secondary training glider designed for club use. Plans were sold and it was built in Germany and across the world.
The Jacobs Hols der Teufel was a single seat trainer glider produced in complete and plan forms in Germany from 1928. It was built and used worldwide.