This article needs additional citations for verification .(December 2018) |
A solar charger is a charger that employs solar energy to supply electricity to devices or batteries. They are generally portable.
Solar chargers can charge lead acid or Ni-Cd battery banks up to 48 V and hundreds of ampere hours (up to 4000 Ah) capacity. Such type of solar charger setups generally use an intelligent charge controller. A series of solar cells are installed in a stationary location (ie: rooftops of homes, base-station locations on the ground etc.) and can be connected to a battery bank to store energy for off-peak usage. They can also be used in addition to mains-supply chargers for energy saving during the daytime.
Most portable chargers can obtain energy from the sun only. Examples of solar chargers in popular use include:
A solar panel can produce a range of charging voltages depending upon sunlight intensity, so a voltage regulator must be included in the charging circuit so as to not over-charge (overvoltage) a device such as a 12 volt car battery.
Portable solar chargers are used to charge cell phones and other small electronic devices on the go. Chargers on the market today use various types of solar panels, ranging from thin film panels with efficiencies from 7-15% (amorphous silicon around 7%, CIGS closer to 15%), to the slightly more efficient monocrystalline panels which offer efficiencies up to 18%.
The other type of portable solar chargers are those with wheels which enable them to be transported from one place to another and be used by a lot of people. They are semi-public, considering the fact that are used publicly but not permanently installed. [1]
The solar charger industry has been plagued by companies mass-producing low efficiency solar chargers that don't meet the consumer's expectations. This in turn has made it hard for new solar charger companies to gain the trust of consumers. Solar companies are starting to offer high-efficiency solar chargers. Portable solar power is being utilized in developing countries to power lighting as opposed to utilizing kerosene lamps which are responsible for respiratory infections, lung and throat cancers, serious eye infections, cataracts as well as low birth weights. Solar power provides an opportunity for rural areas to "leapfrog" traditional grid infrastructure and move directly to distributed energy solutions.
Some solar chargers also have an on-board battery which is charged by the solar panel when not charging anything else. This allows the user to be able to use the solar energy stored in the battery to charge their electronic devices at night or when indoors.
Solar chargers can also be rollable or flexible and are manufactured using thin film PV technology. Rollable solar chargers may include Li-ion batteries.
Currently, foldable solar panels are coming down in price to the point that almost anyone can deploy one while at the beach, biking, hiking, or at any outdoor location and charge their cellphone, tablet, computer etc. Some companies such as GoSun have incorporated a solar charger into a table so that can have more than one function. [2]
Solar cell phone chargers use solar panels to charge cell phone batteries. They can be used when no electricity supply is available—either mains or, for example, a vehicle battery—and are sometimes suggested as a way to charge phones without consuming mains electricity, unlike electrical cell phone chargers. Some can also be used as a conventional charger by plugging into an electrical outlet. [3] Some chargers have an internal rechargeable battery which is charged in sunlight and then used to charge a phone; others charge the phone directly.
There are also public solar chargers for mobile phones which can be installed permanently in public places such as streets, park and squares. One such is the Strawberry Tree public solar charger. [4] [5] [6]
Street Charge was a solar-powered phone charging station developed by NRG Energy, Inc., designed to grant free phone charging services to pedestrians and tourists. [7] The charging stations can also be modified to emit Wi-Fi signals and display advertisements. The appliance was released in 2013, and the original prototype was tested in Brooklyn, New York. [8] A collaboration between NRG Energy, Inc. and AT&T to implement Street Charge units throughout New York City that was planned to each offer six USB ports. [9] This project will cost around $300,000-500,000. [10] There was a concern was that the wiring might be modified by malicious users to steal or wipe data from devices plugged into the device. [11]
One cell phone model was reported in 2010 to have a built in solar charger. [12] Solar chargers are commercially available for cellphones.
Solar cell phone chargers come in different shapes and configurations including folding (Goal Zero, Endless Sun Solar) and types that unfold like petals (Solio). [13]
They also come in the form of straps, with solar cells on the outer surface and a rechargeable battery inside. Solar cell technology limits the effectiveness and practicality of phone solar chargers for everyday use. Phone charge times vary depending on the solar panel size and efficiency, or the battery capacity of models with batteries, further extending the charge times of solar chargers. The fold-out design provides a larger solar panel, hence higher charge current, and is compact when not in use.
Solar chargers can be used to charge other rechargeable devices with requirements similar to a mobile phone, such as Bluetooth headsets and music players. [12]
Solar chargers used to charge a phone directly, rather than by using an internal battery, can damage a phone if the output is not well-controlled, [14] for example by supplying excessive voltage in bright sunlight. In less bright light, although there is electrical output it may be too low to support charging, it will not just charge slower.
An uninterruptible power supply (UPS) or uninterruptible power source is a type of continual power system that provides automated backup electric power to a load when the input power source or mains power fails. A UPS differs from a traditional auxiliary/emergency power system or standby generator in that it will provide near-instantaneous protection from input power interruptions by switching to energy stored in battery packs, supercapacitors or flywheels. The on-battery run-times of most UPSs are relatively short but sufficient to "buy time" for initiating a standby power source or properly shutting down the protected equipment. Almost all UPSs also contain integrated surge protection to shield the output appliances from voltage spikes.
A nickel–metal hydride battery is a type of rechargeable battery. The chemical reaction at the positive electrode is similar to that of the nickel–cadmium cell (NiCd), with both using nickel oxide hydroxide (NiOOH). However, the negative electrodes use a hydrogen-absorbing alloy instead of cadmium. NiMH batteries can have two to three times the capacity of NiCd batteries of the same size, with significantly higher energy density, although only about half that of lithium-ion batteries.
The nickel–cadmium battery is a type of rechargeable battery using nickel oxide hydroxide and metallic cadmium as electrodes. The abbreviation Ni–Cd is derived from the chemical symbols of nickel (Ni) and cadmium (Cd): the abbreviation NiCad is a registered trademark of SAFT Corporation, although this brand name is commonly used to describe all Ni–Cd batteries.
A rechargeable battery, storage battery, or secondary cell, is a type of electrical battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. It is composed of one or more electrochemical cells. The term "accumulator" is used as it accumulates and stores energy through a reversible electrochemical reaction. Rechargeable batteries are produced in many different shapes and sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network. Several different combinations of electrode materials and electrolytes are used, including lead–acid, zinc–air, nickel–cadmium (NiCd), nickel–metal hydride (NiMH), lithium-ion (Li-ion), lithium iron phosphate (LiFePO4), and lithium-ion polymer.
A power supply is an electrical device that supplies electric power to an electrical load. The main purpose of a power supply is to convert electric current from a source to the correct voltage, current, and frequency to power the load. As a result, power supplies are sometimes referred to as electric power converters. Some power supplies are separate standalone pieces of equipment, while others are built into the load appliances that they power. Examples of the latter include power supplies found in desktop computers and consumer electronics devices. Other functions that power supplies may perform include limiting the current drawn by the load to safe levels, shutting off the current in the event of an electrical fault, power conditioning to prevent electronic noise or voltage surges on the input from reaching the load, power-factor correction, and storing energy so it can continue to power the load in the event of a temporary interruption in the source power.
A DC connector is an electrical connector that supplies direct current (DC) power.
An AC adapter or AC/DC adapter is a type of external power supply, often enclosed in a case similar to an AC plug. AC adapters deliver electric power to devices that lack internal components to draw voltage and power from mains power themselves. The internal circuitry of an external power supply is often very similar to the design that would be used for a built-in or internal supply.
A solar electric vehicle is an electric vehicle powered completely or significantly by direct solar energy. Usually, photovoltaic (PV) cells contained in solar panels convert the sun's energy directly into electric energy.
A battery charger, recharger, or simply charger, is a device that stores energy in an electric battery by running current through it. The charging protocol—how much voltage and current, for how long and what to do when charging is complete—depends on the size and type of the battery being charged. Some battery types have high tolerance for overcharging after the battery has been fully charged and can be recharged by connection to a constant voltage source or a constant current source, depending on battery type.
Electric power is the rate of transfer of electrical energy within a circuit. Its SI unit is the watt, the general unit of power, defined as one joule per second. Standard prefixes apply to watts as with other SI units: thousands, millions and billions of watts are called kilowatts, megawatts and gigawatts respectively.
A solar panel is a device that converts sunlight into electricity by using photovoltaic (PV) cells. PV cells are made of materials that produce excited electrons when exposed to light. These electrons flow through a circuit and produce direct current (DC) electricity, which can be used to power various devices or be stored in batteries. Solar panels are also known as solar cell panels, solar electric panels, or PV modules.
A charging station, also known as a charge point, chargepoint, or electric vehicle supply equipment (EVSE), is a power supply device that supplies electrical power for recharging plug-in electric vehicles.
A charge controller, charge regulator or battery regulator limits the rate at which electric current is added to or drawn from electric batteries to protect against electrical overload, overcharging, and may protect against overvoltage. This prevents conditions that reduce battery performance or lifespan and may pose a safety risk. It may also prevent completely draining a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. The terms "charge controller" or "charge regulator" may refer to either a stand-alone device, or to control circuitry integrated within a battery pack, battery-powered device, and/or battery charger.
A solar car is a solar vehicle for use on public roads or race tracks. Solar vehicles are electric vehicles that use self-contained solar cells to provide full or partial power to the vehicle via sunlight. Solar vehicles typically contain a rechargeable battery to help regulate and store the energy from the solar cells and from regenerative braking. Some solar cars can be plugged into external power sources to supplement the power of sunlight used to charge their battery.
A photovoltaic system, also called a PV system or solar power system, is an electric power system designed to supply usable solar power by means of photovoltaics. It consists of an arrangement of several components, including solar panels to absorb and convert sunlight into electricity, a solar inverter to convert the output from direct to alternating current, as well as mounting, cabling, and other electrical accessories to set up a working system. Many utility-scale PV systems use tracking systems that follow the sun's daily path across the sky to generate more electricity than fixed-mounted systems.
A battery management system (BMS) is any electronic system that manages a rechargeable battery by facilitating the safe usage and a long life of the battery in practical scenarios while monitoring and estimating its various states, calculating secondary data, reporting that data, controlling its environment, authenticating or balancing it.
An electric battery is a source of electric power consisting of one or more electrochemical cells with external connections for powering electrical devices. When a battery is supplying power, its positive terminal is the cathode and its negative terminal is the anode. The terminal marked negative is the source of electrons. When a battery is connected to an external electric load, those negatively charged electrons flow through the circuit and reach to the positive terminal, thus cause a redox reaction by attracting positively charged ions, cations. Thus converts high-energy reactants to lower-energy products, and the free-energy difference is delivered to the external circuit as electrical energy. Historically the term "battery" specifically referred to a device composed of multiple cells; however, the usage has evolved to include devices composed of a single cell.
SunCore Corporation is a company that produces light-powered intelligent charging systems to power today's mobile devices for original equipment manufacturers (OEMs), operators and distributors, cofounded in 2004 by The Brimmer Family in Irvine, California.
The following outline is provided as an overview of and topical guide to solar energy:
There are many practical applications for solar panels or photovoltaics. From the fields of the agricultural industry as a power source for irrigation to its usage in remote health care facilities to refrigerate medical supplies. Other applications include power generation at various scales and attempts to integrate them into homes and public infrastructure. PV modules are used in photovoltaic systems and include a large variety of electrical devices.