Steam-Generating Heavy Water Reactor

Last updated

The Steam Generating Heavy Water Reactor (SGHWR) was a United Kingdom design for commercial nuclear reactors. It uses heavy water as the neutron moderator and normal "light" water as the coolant. The coolant boils in the reactor, like a boiling water reactor, and drives the power-extraction steam turbines.

Contents

A single prototype of the design, the 100 MWe "Winfrith Reactor", was connected to the grid in 1967 and ran until 1990. A larger commercial design with a 650 MWe power rating was selected in 1974 as the basis for future reactor builds in the UK, but declining electricity use led to this decision being reversed in 1976 and no production models were ever built.

SGHWR was among a number of similar designs, which include the CANDU-derived Gentilly Nuclear Generating Station in Quebec, the Fugen Advanced Test Reactor in Japan, and the never-commissioned CIRENE reactor in Italy. These designs differ with the baseline CANDU design, which uses heavy water as the coolant as well as the moderator.

History

SGHWR was a departure from previous UK designs, which had used graphite as the moderator and carbon dioxide gas as the coolant. The original Magnox was designed to run on natural uranium but the subsequent Advanced Gas-cooled Reactor (AGR) abandoned this for a variety of reasons, using low-enriched uranium instead.

Although Magnox was technically successful it was expensive. For future orders, several alternative reactor designs concepts were studied during the early 1960s. As part of this program, a 100  megawatt electrical (MWe) prototype of the SGHWR was built at Winfrith in the 1960s and was connected to the grid in 1967. It is often known simply as the "Winfrith Reactor". The other designs produced similar sub-scale prototypes of the High Temperature Reactor also at Winfrith, the Magnox-derived AGR at Windscale, and the Prototype Fast Reactor at Dounreay.

This contest ultimately selected the AGR design, and several AGRs began construction in the late 1960s. These quickly ran into problems, and by the early 1970s the design was considered a failure. In 1974, a larger version of the SGHWR with a design power of 650 MWe was selected for future power plant builds. In 1976 this decision was reversed due to the combination of a predicted sharp drop in electricity demand, higher than expected costs, and the lack of obvious export potential in a shrinking nuclear market. Given the limited number of new reactors expected in the future, modified versions of the AGR were selected over SGHWR as no further development effort was needed.

The Winfrith Reactor reactor remained operational and was used for a wide variety of purposes until it ceased operation in October 1990 after 23 years of operations. As of 2019 it is in the process of being decommissioned by Magnox Ltd on behalf of the Nuclear Decommissioning Authority. [1] Between 2022 and 2024, 1068 drums of radioactive waste were transported by train to the Low Level Waste Repository. The material was once intermediate-level waste but had decayed down to low-level waste while being stored at Winfrith. [2] [3]

Design

SGHWR is similar to the Canadian CANDU reactor designs in that it uses a low-pressure reactor vessel containing the moderator and high-pressure piping for the coolant. This both reduces the total amount of expensive heavy water required, as well as reducing the complexity of the reactor vessel, which in turn reduces construction costs and complexity.

It differs in that it uses ordinary "light" water as a coolant, whereas CANDU uses heavy water here as well. Light water reduces the neutron economy to the point where natural uranium can no longer be used as fuel. The ability to run on natural uranium was considered a major benefit in the 1960s as it appeared the demand for enrichment would outstrip the supply. By the 1970s it was clear that fuel supplies were not going to be a problem, and the use of unenriched fuel was no longer a major design goal. Using slight enrichment leads to higher burnup and more economical fuel cycles, offsetting the now-low costs of enrichment.

The idea of using heavy water for the moderator and light water for the coolant was explored by a number of designs during this period. The Gentilly-1 Nuclear Generating Station in Quebec used the same solution, but this was not successful and shut down after a short lifetime. The Fugen Advanced Test Reactor in Japan suffered a similar fate. The Italian CIRENE design, hosted at Latina Nuclear Power Plant, was built but never commissioned. The last attempt to use this basic design was the modern Advanced CANDU Reactor of the early 2000s, but development ended without an example being built.

Related Research Articles

<span class="mw-page-title-main">CANDU reactor</span> Canadian heavy water nuclear reactor design

The CANDU is a Canadian pressurized heavy-water reactor design used to generate electric power. The acronym refers to its deuterium oxide moderator and its use of uranium fuel. CANDU reactors were first developed in the late 1950s and 1960s by a partnership between Atomic Energy of Canada Limited (AECL), the Hydro-Electric Power Commission of Ontario, Canadian General Electric, and other companies.

<span class="mw-page-title-main">Nuclear reactor</span> Device used to initiate and control a nuclear chain reaction

A nuclear reactor is a device used to initiate and control a fission nuclear chain reaction or nuclear fusion reactions. Nuclear reactors are used at nuclear power plants for electricity generation and in nuclear marine propulsion. Heat from nuclear fission is passed to a working fluid, which in turn runs through steam turbines. These either drive a ship's propellers or turn electrical generators' shafts. Nuclear generated steam in principle can be used for industrial process heat or for district heating. Some reactors are used to produce isotopes for medical and industrial use, or for production of weapons-grade plutonium. As of 2022, the International Atomic Energy Agency reports there are 422 nuclear power reactors and 223 nuclear research reactors in operation around the world.

<span class="mw-page-title-main">Pressurized water reactor</span> Type of nuclear reactor

A pressurized water reactor (PWR) is a type of light-water nuclear reactor. PWRs constitute the large majority of the world's nuclear power plants. In a PWR, the primary coolant (water) is pumped under high pressure to the reactor core where it is heated by the energy released by the fission of atoms. The heated, high pressure water then flows to a steam generator, where it transfers its thermal energy to lower pressure water of a secondary system where steam is generated. The steam then drives turbines, which spin an electric generator. In contrast to a boiling water reactor (BWR), pressure in the primary coolant loop prevents the water from boiling within the reactor. All light-water reactors use ordinary water as both coolant and neutron moderator. Most use anywhere from two to four vertically mounted steam generators; VVER reactors use horizontal steam generators.

<span class="mw-page-title-main">Advanced Gas-cooled Reactor</span> Type of nuclear reactor

The Advanced Gas-cooled Reactor (AGR) is a type of nuclear reactor designed and operated in the United Kingdom. These are the second generation of British gas-cooled reactors, using graphite as the neutron moderator and carbon dioxide as coolant. They have been the backbone of the UK's nuclear power generation fleet since the 1980s.

<span class="mw-page-title-main">Magnox</span> Type of nuclear reactor

Magnox is a type of nuclear power / production reactor that was designed to run on natural uranium with graphite as the moderator and carbon dioxide gas as the heat exchange coolant. It belongs to the wider class of gas-cooled reactors. The name comes from the magnesium-aluminium alloy, used to clad the fuel rods inside the reactor. Like most other "Generation I nuclear reactors", the Magnox was designed with the dual purpose of producing electrical power and plutonium-239 for the nascent nuclear weapons programme in Britain. The name refers specifically to the United Kingdom design but is sometimes used generically to refer to any similar reactor.

<span class="mw-page-title-main">Fast-neutron reactor</span> Nuclear reactor where fast neutrons maintain a fission chain reaction

A fast-neutron reactor (FNR) or fast-spectrum reactor or simply a fast reactor is a category of nuclear reactor in which the fission chain reaction is sustained by fast neutrons, as opposed to slow thermal neutrons used in thermal-neutron reactors. Such a fast reactor needs no neutron moderator, but requires fuel that is relatively rich in fissile material when compared to that required for a thermal-neutron reactor. Around 20 land based fast reactors have been built, accumulating over 400 reactor years of operation globally. The largest of this was the Superphénix Sodium cooled fast reactor in France that was designed to deliver 1,242 MWe. Fast reactors have been intensely studied since the 1950s, as they provide certain advantages over the existing fleet of water cooled and water moderated reactors. These are:

<span class="mw-page-title-main">Nuclear fuel</span> Material fuelling nuclear reactors

Nuclear fuel is material used in nuclear power stations to produce heat to power turbines. Heat is created when nuclear fuel undergoes nuclear fission.

The Advanced CANDU reactor (ACR), or ACR-1000, was a proposed Generation III+ nuclear reactor design, developed by Atomic Energy of Canada Limited (AECL). It combined features of the existing CANDU pressurised heavy water reactors (PHWR) with features of light-water cooled pressurized water reactors (PWR). From CANDU, it took the heavy water moderator, which gave the design an improved neutron economy that allowed it to burn a variety of fuels. It replaced the heavy water cooling loop with one containing conventional light water, reducing costs. The name refers to its design power in the 1,000 MWe class, with the baseline around 1,200 MWe.

<span class="mw-page-title-main">Douglas Point Nuclear Generating Station</span>

The Douglas Point Nuclear Generating Station was Canada’s first full-scale nuclear power plant and the second CANDU pressurised heavy water reactor. Its success was a major milestone and marked Canada's entry into the global nuclear power scene. The same site was later used for the Bruce Nuclear Generating Station.

The Whiteshell Reactor No. 1, or WR-1, was a Canadian research reactor located at AECL's Whiteshell Laboratories (WNRL) in Manitoba. Originally known as Organic-Cooled Deuterium-Reactor Experiment (OCDRE), it was built to test the concept of a CANDU-type reactor that replaced the heavy water coolant with an oil substance. This had a number of potential advantages in terms of cost and efficiency.

<span class="mw-page-title-main">Winfrith</span>

Winfrith Atomic Energy Establishment, or AEE Winfrith, was a United Kingdom Atomic Energy Authority site near Winfrith Newburgh in Dorset. It covered an area on Winfrith Heath to the west of the village of Wool between the A352 road and the South West Main Line.

<span class="mw-page-title-main">Dragon reactor</span> UK experimental HTR, operated from 1965 to 1976

Dragon was an experimental high temperature gas-cooled reactor at Winfrith in Dorset, England, operated by the United Kingdom Atomic Energy Authority (UKAEA). Its purpose was to test fuel and materials for the European High Temperature Reactor programme, which was exploring the use of tristructural-isotropic (TRISO) fuel and gas cooling for future high-efficiency reactor designs. The project was built and managed as an Organisation for Economic Co-operation and Development/Nuclear Energy Agency international project. In total, 13 countries were involved in its design and operation during the project lifetime.

<span class="mw-page-title-main">Carolinas–Virginia Tube Reactor</span> Decommissioned experimental pressurized water reactor in South Carolina, US

Carolinas–Virginia Tube Reactor (CVTR), also known as Parr Nuclear Station, was an experimental pressurized tube heavy water nuclear power reactor at Parr, South Carolina in Fairfield County. It was built and operated by the Carolinas Virginia Nuclear Power Associates. CVTR was a small test reactor, capable of generating 17 megawatts of electricity. It was officially commissioned in December 1963 and left service in January 1967.

KS 150 is a Gas Cooled Reactor using Heavy Water as a moderator (GCHWR) nuclear reactor design. A single example, A-1, was constructed at the Bohunice Nuclear Power Plant in Jaslovské Bohunice, Czechoslovakia. The power plant suffered a series of accidents, the worst being an accident on February 22, 1977, rated INES-4. Since 1979 the plant has been undergoing decommissioning.

A gas-cooled reactor (GCR) is a nuclear reactor that uses graphite as a neutron moderator and a gas as coolant. Although there are many other types of reactor cooled by gas, the terms GCR and to a lesser extent gas cooled reactor are particularly used to refer to this type of reactor.

<span class="mw-page-title-main">Online refuelling</span>

In nuclear power technology, online refuelling is a technique for changing the fuel of a nuclear reactor while the reactor is critical. This allows the reactor to continue to generate electricity during routine refuelling, and therefore improve the availability and profitability of the plant.

A pressurized heavy-water reactor (PHWR) is a nuclear reactor that uses heavy water (deuterium oxide D2O) as its coolant and neutron moderator. PHWRs frequently use natural uranium as fuel, but sometimes also use very low enriched uranium. The heavy water coolant is kept under pressure to avoid boiling, allowing it to reach higher temperature (mostly) without forming steam bubbles, exactly as for a pressurized water reactor. While heavy water is very expensive to isolate from ordinary water (often referred to as light water in contrast to heavy water), its low absorption of neutrons greatly increases the neutron economy of the reactor, avoiding the need for enriched fuel. The high cost of the heavy water is offset by the lowered cost of using natural uranium and/or alternative fuel cycles. As of the beginning of 2001, 31 PHWRs were in operation, having a total capacity of 16.5 GW(e), representing roughly 7.76% by number and 4.7% by generating capacity of all current operating reactors.

<span class="mw-page-title-main">Organic nuclear reactor</span> Nuclear reactor that uses organic liquids for cooling and neutron moderation

An organic nuclear reactor, or organic cooled reactor (OCR), is a type of nuclear reactor that uses some form of organic fluid, typically a hydrocarbon substance like polychlorinated biphenyl (PCB), for cooling and sometimes as a neutron moderator as well.

CIRENE is an Italian nuclear reactor design and the name of the prototype model that was built at the Latina Nuclear Power Plant south of Rome. CIRENE, an acronym for CISE Reattore a Nebbia, uses heavy water as its neutron moderator and normal "light" boiling water as the coolant. This reduces the amount of heavy water required for operations compared to CANDU, still using natural uranium as fuel. CIRENE was one of several similar heavy/light water designs, with similar small-scale units at Gentilly in Canada, SGHWR in the United Kingdom and Fugen in Japan.

<span class="mw-page-title-main">IPHWR-700</span> Indian nuclear reactor design

The IPHWR-700 is an Indian pressurized heavy-water reactor designed by the NPCIL. It is a Generation III reactor developed from earlier CANDU based 220 MW and 540 MW designs. It can generate 700 MW of electricity. Currently there is two unit operational, 6 units under construction and 8 more units planned, at a cost of 1.05 lakh crore (US$13 billion).

References

  1. "SGHWR Fuel Ponds". UKAEA. Archived from the original on 7 October 2008.
  2. "Rail transfer landmark for UK waste disposal project". World Nuclear News. 28 March 2022. Retrieved 28 March 2022.
  3. "UK completes transfer of Winfrith waste drums". World Nuclear News. 13 March 2024. Retrieved 15 March 2024.