This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these template messages)
|
Truckload shipping is freight transport in which a semi-trailer or intermodal container is filled entirely with one type of cargo. It differs from less-than-truckload shipping (LTL) in which freight from multiple customers is combined in one trailer. A truckload carrier is a trucking company that contracts entire trailer-load to a single customer.
The three types of truckload shipment are dry van, flatbed, and refrigerated.
Truckload shipments are used for large shipments of freight and typically run on 48 foot or 53 foot dry van trailers which hold 24 or 26 pallets respectively. If multiple truckloads are needed for a large shipment, truckload shipping generally is cheaper, faster, and less damaging to goods than booking a large number of less-than-truckload shipping trips.
Efficiency and productivity of the goods' packaging can be improved in truckload shipping. Compared to less-than-truckload, full truckload is cost-effective when weight is high. Full-truckload freight is faster than LTL because it is sent directly to the destination and does not make stops to pick up or drop off other cargo.
Freight is usually loaded onto pallets for unit loads. Sturdy shipping containers such as crates or corrugated fiberboard boxes are commonly used. Carriers have published tariffs that provide some guidance for packaging. Packaging engineers design and test packaging to meet the specific needs of the logistics system and the product being shipped.
Truckload shipments are sometimes broken down into individual containers and further shipped by LTL or express carriers. Packaging for TL often needs to withstand the more severe handling of individual shipments. A typical full truckload for a dry van trailer consists of 24 standard pallets of cargo that weighs up to 45,000 lbs. (or more).
When the US Interstate Highway System expanded in the 1950s, the trucking industry took over a large market share of goods transportation, which had previously relied primarily on railroads. The Interstate Highway System allowed merchandise to travel door to door from a distribution center in one area to a distribution center in another area, and it made long-distance freight transport faster.
Containerization is a system of intermodal freight transport using intermodal containers. Containerization, also referred as container stuffing or container loading, is the process of unitization of cargoes in exports. Containerization is the predominant form of unitization of export cargoes, as opposed to other systems such as the barge system or palletization. The containers have standardized dimensions. They can be loaded and unloaded, stacked, transported efficiently over long distances, and transferred from one mode of transport to another—container ships, rail transport flatcars, and semi-trailer trucks—without being opened. The handling system is mechanized so that all handling is done with cranes and special forklift trucks. All containers are numbered and tracked using computerized systems.
An intermodal container, often called a shipping container, or cargo container, (or simply “container”) is a large metal crate designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport – such as from ships to trains to trucks – without unloading and reloading their cargo. Intermodal containers are primarily used to store and transport materials and products efficiently and securely in the global containerized intermodal freight transport system, but smaller numbers are in regional use as well. It is like a boxcar that does not have wheels. Based on size alone, up to 95% of intermodal containers comply with ISO standards, and can officially be called ISO containers. These containers are known by many names: freight container, sea container, ocean container, container van or sea van, sea can or C can, or MILVAN, or SEAVAN. The term CONEX (Box) is a technically incorrect carry-over usage of the name of an important predecessor of the ISO containers: the much smaller steel CONEX boxes used by the U.S. Army.
Intermodal freight transport involves the transportation of freight in an intermodal container or vehicle, using multiple modes of transportation, without any handling of the freight itself when changing modes. The method reduces cargo handling, and so improves security, reduces damage and loss, and allows freight to be transported faster. Reduced costs over road trucking is the key benefit for inter-continental use. This may be offset by reduced timings for road transport over shorter distances.
In transportation, freight refers to goods conveyed by land, water or air, while cargo refers specifically to freight when conveyed via water or air. In economics, freight refers to goods transported at a freight rate for commercial gain. The term cargo is also used in case of goods in the cold-chain, because the perishable inventory is always in transit towards a final end-use, even when it is held in cold storage or other similar climate-controlled facilities, including warehouses.
Cross-docking is a logistical practice of Just-In-Time Scheduling where materials are delivered directly from a manufacturer or a mode of transportation to a customer or another mode of transportation. Cross-docking often aims to minimize overheads related to storing goods between shipments or while awaiting a customer's order. This may be done to change the type of conveyance, to sort material intended for different destinations, or to combine material from different origins into transport vehicles with the same or similar destinations.
A distribution center for a set of products is a warehouse or other specialized building, often with refrigeration or air conditioning, which is stocked with products (goods) to be redistributed to retailers, to wholesalers, or directly to consumers. A distribution center is a principal part, the order processing element, of the entire order fulfillment process. Distribution centers are usually thought of as being demand driven. A distribution center can also be called a warehouse, a DC, a fulfillment center, a cross-dock facility, a bulk break center, and a package handling center. The name by which the distribution center is known is commonly based on the purpose of the operation. For example, a "retail distribution center" normally distributes goods to retail stores, an "order fulfillment center" commonly distributes goods directly to consumers, and a cross-dock facility stores little or no product but distributes goods to other destinations.
Less-than-truckload shipping or less than load (LTL) is the transportation of an amount of freight sized between individual parcels and full truckloads. Parcel carriers handle small packages and freight that can be broken down into units less than approximately 150 pounds (68 kg). Full truckload carriers move entire semi-trailers. Semi-trailers are typically between 26 and 53 feet and require a substantial amount of freight to make such transportation economical. The term LTL can refer to the freight itself, or to the carrier that transports the such freight.
Trailer Bridge, Inc. is a freight service company headquartered in Jacksonville, Florida. They offer international and domestic shipping with primary international calls to San Juan, Puerto Rico and Puerto Plata, Dominican Republic.
TForce Freight, a subsidiary of TFI International, is an American less than truckload (LTL) freight carrier based in Richmond, Virginia. The company was founded in 1935 as Overnite Transportation, the name it used until 2006 when it was rebranded UPS Freight by new owner UPS. Its name changed to TForce Freight in 2021 when UPS sold the company to TFI.
Dimensioners are weighing and volume measuring systems for measuring three-dimensional or cuboid-shaped objects such as packages, parcels, pallets, cartons and boxes. They are frequently used as part of a much larger logistical system in a distribution center, warehouse or trucking terminal facility. By knowing exactly how much space a parcel, object or pallet will occupy, warehouses and shipping companies are able optimize the space available to them.
New England Motor Freight, Inc. (NEMF) was a unionized less-than-truckload (LTL) and truckload freight carrier, based in Elizabeth, New Jersey. It was one of the largest LTL carriers in the US Northeast when it entered Chapter 11 bankruptcy in 2019 and subsequently shut down all operations in 2020.
A specialized set of jargon describe the tools, equipment, and employment sectors used in the trucking industry in the United States. Some terms may be used within other English-speaking countries, or within the freight industry in general. For example, shore power is a term borrowed from shipping terminology, in which electrical power is transferred from shore to ship, instead of the ship relying upon idling its engines. Drawing power from land lines is more efficient than engine idling and eliminates localized air pollution. Another borrowed term is "landing gear", which refers to the legs which support the front end of a semi-trailer when it is not connected to a semi-truck. Some nicknames are obvious wordplay, such as "portable parking lot", in reference to a truck that carries automobiles.
Pitt Ohio Express, LLC, stylized PITT OHIO, is a privately owned transportation and supply chain management company based in Pittsburgh, Pennsylvania that serves the Mid-Atlantic and Midwestern US. Pitt Ohio ranked 48th on Transport Topics Top 100 For-Hire list and 14th on its Top Less-Than-Truckload (LTL) Carriers list of US and Canadian freight carriers by revenue for 2021.
Con-way Freight was a less-than-truckload (LTL) motor carrier headquartered in Ann Arbor utilizing a network of freight service centers to provide regional, inter-regional and transcontinental less-than-truckload freight services throughout North America. The business unit provided day-definite delivery service to manufacturing, industrial and retail customers. Con-way Freight was the largest division of Con-way, Inc. with 16,600 employees, more than 365 operating locations, 16,000 dock doors and 32,750 tractors and trailers. The company was founded by Consolidated Freightways (CF) of Portland, Oregon as a non union spinoff, for less than truckload hauling. In 2009 Con-way Freight reported revenues of over $2.6 billion. Con-way Inc., including Con-way Freight and sibling company Con-way Truckload, was acquired by XPO Logistics, a primarily non-asset logistics company from Greenwich, Connecticut, in a deal worth $3.5 billion.
A shipping container is a container with strength suitable to withstand shipment, storage, and handling. Shipping containers range from large reusable steel boxes used for intermodal shipments to the ubiquitous corrugated boxes. In the context of international shipping trade, "container" or "shipping container" is virtually synonymous with "intermodal freight container", a container designed to be moved from one mode of transport to another without unloading and reloading.
TFI International Inc. is a Canadian transport and logistics company based in Saint-Laurent, Quebec, a borough of Montreal. It operates primarily in Canada, the United States, and Mexico through 4 business segments: less than truckload (LTL), package and courier, logistics, and truckload. It has Canada's largest LTL business, largest trucking fleet, and in 2021 was ranked 6th in terms of revenue among both LTL and truckload North American carriers. Its trucking fleet consists of over 14,000 company-owned power units, nearly 10,000 owner-operator tractors, nearly 50,000 trailers and over 200 straight trucks.
Old Dominion Freight Line, Inc. (ODFL) is an American regional, inter-regional and national less than truckload shipping (LTL) company. In addition to its core LTL services, the company offers expedited, logistics and household moving services.
PLS Logistics Service (PLS), founded in 1991, is an American third-party logistics provider in the metal, lumber, and building industries. Headquartered in Cranberry Township, Pennsylvania, a suburb of Pittsburgh, PLS Logistics Services provides freight transportation, logistics, and technology services for businesses. PLS serves a variety of companies, including suppliers, producers, wholesalers, service centers, and end-users.
A freight broker is an intermediary between a shipper and a freight service provider. Freight brokers can specialize in certain types of freight, such as equipment hauling on lowboys, oversize, bulk tanker, auto, or other types of freight transportation.
The freight technology sector, also known as FreightTech, refers to software companies and technologies which assist in supply chain management and the movement of freight. In the five years following 2014, investment in FreightTech companies grew from $118 million to $3 billion per year.