USS Seymour D. Owens

Last updated
USS Seymour D. Owens (DD-767) at the Long Beach Naval Shipyard on 13 December 1951 (USN 15450).jpg
Seymour D. Owens at the Long Beach Naval Shipyard, 13 December 1951
History
US flag 48 stars.svgUnited States
NameSeymour D. Owens
Namesake Seymour D. Owens
Laid down3 April 1944
Stricken9 June 1958
FateSold for scrap
General characteristics
Class and type Gearing-class destroyer
Displacement2,425 tons
Length390 ft 6 in (119.0 m) (overall)
Beam41 ft 1 in (12.52 m)
Draft18 ft 6 in (5.64 m)
Propulsion
Speed35 kn (65 km/h; 40 mph)
Range4,500  nmi (8,300 km; 5,200 mi) at 20 kn (37 km/h; 23 mph)
Complement336 officers and enlisted
Armament

USS Seymour D. Owens (DD-767) was scheduled to be a Gearing-class destroyer in the United States Navy. She was named for Seymour D. Owens, a United States Navy officer killed during World War II.

Contents

Seymour D. Owens was laid down on 3 April 1944 by the Bethlehem Steel Company, San Francisco, California, [1] and was assigned the name Seymour D. Owens on 8 January 1945. Seymour Owens was the captain of the destroyer USS Norman Scott (DD-690); he was killed in action during World War II off the coast of Tinian aboard Norman Scott on 24 July 1944.

Since Seymour D. Owens was incomplete at the end of World War II, further construction was cancelled on 7 January 1946, and the incomplete ship was delivered to the U.S. Navy on 28 February 1947. Portions of her hull were used to repair the destroyer USS Ernest G. Small (DD-838). The remainder of her hull was then berthed with the Pacific Reserve Fleet where it remained until sold for scrapping to National Metal and Steel on 23 March 1959. The name Seymour D. Owens was struck from the Naval Vessel Register on 9 June 1958.

This article incorporates text from the public domain Dictionary of American Naval Fighting Ships .The entry can be found here.

Citations

  1. Silverstone, p. 85

Bibliography

Related Research Articles

<span class="mw-page-title-main">Bath Iron Works</span> American shipyard located on the Kennebec River in Bath, Maine

Bath Iron Works (BIW) is a major United States shipyard located on the Kennebec River in Bath, Maine, founded in 1884 as Bath Iron Works, Limited. Since 1995, Bath Iron Works has been a subsidiary of General Dynamics, one of the world's largest defense companies. BIW has built private, commercial, and military vessels, most of which have been ordered by the United States Navy.

USS <i>Gyatt</i> Gearing-class destroyer

USS Gyatt (DD-712/DDG-1/DDG-712) was a Gearing-class destroyer in service with the United States Navy. The ship was named for Edward Earl Gyatt, a United States Marine Corps private and Marine Raider who was killed during the Battle of Guadalcanal. Laid down in 1944, the destroyer was commissioned in 1945 and missed combat during the Second World War. In 1955, she was converted into a guided missile destroyer (DDG) and served to test onboard missile systems before she was decommissioned and sunk as a target in 1970.

USS <i>Somers</i> (DD-381) Somers-class destroyer

USS Somers (DD-381) was a destroyer commissioned in the United States Navy from 1937 to 1945. She was the lead ship of the Somers-class of destroyer leaders and was named for Richard Somers. During World War II, Somers was active in the South Atlantic, the North Atlantic, and the Mediterranean Theater of Operations.

USS <i>Hawkins</i> Gearing-class destroyer

USS Hawkins (DD-873) was a Gearing-class destroyer in the United States Navy during World War II. Following the war, the ship saw service in the Korean War and in the 1970s, was transferred to the Republic of China Navy as Tze Yang. She remained in service until the 1990s. The ship was then scrapped with the exception of her superstructure, which became part of a display and training ground at the Zuoying Naval Academy.

<i>Gearing</i>-class destroyer Class of American destroyers

The Gearing class was a series of 98 destroyers built for the U.S. Navy during and shortly after World War II. The Gearing design was a minor modification of the Allen M. Sumner class, whereby the hull was lengthened by 14 ft (4.3 m) at amidships, which resulted in more fuel storage space and increased the operating range.

<span class="mw-page-title-main">Destroyer escort</span> US Navy warship classification

Destroyer escort (DE) was the United States Navy mid-20th-century classification for a 20-knot warship designed with the endurance necessary to escort mid-ocean convoys of merchant marine ships.

<i>Mahan</i>-class destroyer Former class of US Navy destroyers

Mahan-class destroyers of the United States Navy were a series of 18 destroyers of which the first 16 were laid down in 1934. The last two of the 18, Dunlap and Fanning, are sometimes considered a separate ship class. All 18 were commissioned in 1936 and 1937. Mahan was the lead ship, named for Rear Admiral Alfred Thayer Mahan, an influential historian and theorist on sea power.

<i>Fletcher</i>-class destroyer 1940s class of destroyers of the United States Navy

The Fletcher class was a class of destroyers built by the United States during World War II. The class was designed in 1939, as a result of dissatisfaction with the earlier destroyer leader types of the Porter and Somers classes. Some went on to serve during the Korean War and into the Vietnam War.

<i>Clemson</i>-class destroyer Destroyer class of the US Navy

The Clemson class was a series of 156 destroyers which served with the United States Navy from after World War I through World War II.

<i>Wickes</i>-class destroyer Destroyer class of the US Navy

The Wickes-class destroyers were a class of 111 destroyers built by the United States Navy in 1917–19. Together with the six preceding Caldwell-class and following 156 subsequent Clemson-class destroyers, they were grouped as the "flush-deck" or "four-stack" type. Only a few were completed in time to serve in World War I, including USS Wickes, the lead ship of the class.

<span class="mw-page-title-main">Union Iron Works</span> San Francisco American shipyard company

Union Iron Works, located in San Francisco, California, on the southeast waterfront, was a central business within the large industrial zone of Potrero Point, for four decades at the end of the nineteenth and beginning of the twentieth centuries.

USS <i>Norman Scott</i> Fletcher-class destroyer

USS Norman Scott (DD-690) was a United States Navy Fletcher-class destroyer named for Rear-Admiral Norman Scott (1889–1942), who was killed in the Naval Battle of Guadalcanal and awarded the Medal of Honor.

<i>Benson</i>-class destroyer U.S. Navy ship class (built 1939–1943)

The Benson class was a class of destroyers of the U.S. Navy built 1939–1943. The thirty 1,620-ton Benson-class destroyers were built in two groups. The first six were authorized in fiscal year 1938 (FY38) and laid down at Bethlehem Steel, Quincy, Massachusetts, and three naval shipyards. The remaining 24 "repeat Bensons" were authorized in 1940–42 and built at four Bethlehem Steel yards. They were laid down after the first group was commissioned. These plus the "repeat Livermores" were also known at the time as the Bristol class. During World War II the Bensons were usually combined with the Livermores as the Benson-Livermore class; this persisted in references until at least the 1960s. In some references both classes are combined and called the Benson class. The Benson- and Gleaves-class destroyers were the backbone of the pre-war Neutrality Patrols and brought the action to the enemy by participating in every major campaign of the war.

<i>Gleaves</i>-class destroyer Destroyer class of the US Navy

The Gleaves-class destroyers were a class of 66 destroyers of the United States Navy built 1938–42, designed by Gibbs & Cox. The first ship of the class was USS Gleaves. They were the destroyer type that was in production for the US Navy when the United States entered World War II.

<i>Gridley</i>-class destroyer Destroyer class of the US Navy

The Gridley-class destroyers, named for Charles Vernon Gridley, were a class of four 1500-ton destroyers in the United States Navy. They were part of a series of USN destroyers limited to 1,500 tons standard displacement by the London Naval Treaty and built in the 1930s. The first two ships were laid down on 3 June 1935 and commissioned in 1937. The second two were laid down in March 1936 and commissioned in 1938. Based on the preceding Mahan-class destroyers with somewhat different machinery, they had the same hull but had only a single stack and mounted sixteen 21 inch (533 mm) torpedo tubes, an increase of four. To compensate for the increased torpedo armament weight, the gun armament was slightly reduced from five 5"/38 caliber guns (127 mm) to four. USS Maury (DD-401) made the highest trial speed ever recorded for a United States Navy destroyer, 42.8 knots. All four ships served extensively in World War II, notably in the Solomon Islands and the Battle of the Philippine Sea, with Maury receiving a Presidential Unit Citation.

<span class="mw-page-title-main">Federal Shipbuilding and Drydock Company</span> 1917–1948 shipbuilding company in the United States

The Federal Shipbuilding and Drydock Company was a United States shipyard in New Jersey active from 1917 to 1948. It was founded during World War I to build ships for the United States Shipping Board. Unlike many shipyards, it remained active during the shipbuilding slump of the 1920s and early 1930s that followed the World War I boom years. During World War II, it built merchant ships as part of the U.S. Government's Emergency Shipbuilding program, at the same time producing more destroyers for the United States Navy than any yard other than the Bath Iron Works. Operated by a subsidiary of the United States Steel Corporation, the shipyard was located at Kearny Point where the mouth of the Hackensack River meets Newark Bay in the Port of New York and New Jersey.

<i>Robert H. Smith</i>-class destroyer Class of destroyer minelayers warship

The Robert H. Smith class of destroyer minelayers was built by the United States during World War II. The class was named for naval officer Robert H. Smith.

USS <i>Abner Read</i> (DD-769)

USS Abner Read (DD-769) was a planned United States Navy Gearing-class destroyer laid down during World War II but never completed. The ship was to be the second ship named for Abner Read (1821–1863), a United States Navy officer killed during the American Civil War. She was assigned the name during construction when the first Abner Read (DD-526), a Fletcher-class destroyer, was sunk by a kamikaze during the Battle of Leyte, 1 November 1944.