William McNaught (Rochdale)

Last updated

1907 McNaught mill engine, now at MOSI Museum of Science and Industry, Manchester 2017 003.jpg
1907 McNaught mill engine, now at MOSI

William McNaught (1811or1812 - 1888) [1] was a steam engine engineer from Rochdale, Lancashire, England.

McNaught was born in Manchester in (1811or1812 and apprenticed with a Mr Mills of Heywood, Bury. He then worked in London for John & Thomas Rennie before coming to Alexander Petrie & Son, around 1838. [1] [2]

McNaught became chief designer and superintendent at James Petrie's [2] and designed a cutoff gear for use on a stationary steam engine. This was patented by James Petrie in 1844. [3] Petrie started to build mill engines in 1819, McNaught joined in 1838 and remained until 1858, when he started his own company. Before this patent, there were problems with slide valves which suffered excessive wear. The Petrie and McNaught cutoff valves were circular with sloping faces that allowed a variable cut-off; they could be easily connected to the governor that McNaught patented in 1850.

In 1860 he left Petrie's to set up his own business building steam engines at the former Halstead's 'Union Foundry' at Wet Rake on Drake Street, Rochdale. He was so successful that by 1863 he had built the St George's Foundry on Crawford St. Rochdale. . When he retired in 1870, the firm was taken over by his sons John and William and became known as J&W McNaught. They later amalgamated with John Petrie becoming Petrie and McNaught. [4]

William McNaught died on 11 February 1888, aged 76. [1]

Related Research Articles

<span class="mw-page-title-main">Valve gear</span> Mechanism for controlling steam flow in a reciprocating steam engine.

The valve gear of a steam engine is the mechanism that operates the inlet and exhaust valves to admit steam into the cylinder and allow exhaust steam to escape, respectively, at the correct points in the cycle. It can also serve as a reversing gear. It is sometimes referred to as the "motion".

<span class="mw-page-title-main">Stationary steam engine</span> Fixed steam engine for pumping or power generation

Stationary steam engines are fixed steam engines used for pumping or driving mills and factories, and for power generation. They are distinct from locomotive engines used on railways, traction engines for heavy steam haulage on roads, steam cars, agricultural engines used for ploughing or threshing, marine engines, and the steam turbines used as the mechanism of power generation for most nuclear power plants.

Steam power developed slowly over a period of several hundred years, progressing through expensive and fairly limited devices in the early 17th century, to useful pumps for mining in 1700, and then to Watt's improved steam engine designs in the late 18th century. It is these later designs, introduced just when the need for practical power was growing due to the Industrial Revolution, that truly made steam power commonplace.

<span class="mw-page-title-main">Compound steam engine</span> Steam engine where steam is expanded in stages

A compound steam engine unit is a type of steam engine where steam is expanded in two or more stages. A typical arrangement for a compound engine is that the steam is first expanded in a high-pressure (HP) cylinder, then having given up heat and losing pressure, it exhausts directly into one or more larger-volume low-pressure (LP) cylinders. Multiple-expansion engines employ additional cylinders, of progressively lower pressure, to extract further energy from the steam.

<span class="mw-page-title-main">Matthew Murray</span> British steam engine and machine tool engineer and manufacturer (1765-1826)

Matthew Murray was an English steam engine and machine tool manufacturer, who designed and built the first commercially viable steam locomotive, the twin cylinder Salamanca in 1812. He was an innovative designer in many fields, including steam engines, machine tools and machinery for the textile industry.

<span class="mw-page-title-main">Beam engine</span> Early configuration of the steam engine utilising a rocking beam to connect major components.

A beam engine is a type of steam engine where a pivoted overhead beam is used to apply the force from a vertical piston to a vertical connecting rod. This configuration, with the engine directly driving a pump, was first used by Thomas Newcomen around 1705 to remove water from mines in Cornwall. The efficiency of the engines was improved by engineers including James Watt, who added a separate condenser; Jonathan Hornblower and Arthur Woolf, who compounded the cylinders; and William McNaught, who devised a method of compounding an existing engine. Beam engines were first used to pump water out of mines or into canals but could be used to pump water to supplement the flow for a waterwheel powering a mill.

<span class="mw-page-title-main">Corliss steam engine</span> Type of steam engine using rotary steam valves

A Corliss steam engine is a steam engine, fitted with rotary valves and with variable valve timing patented in 1849, invented by and named after the American engineer George Henry Corliss of Providence, Rhode Island.

Haigh Foundry was an ironworks and foundry in Haigh, Lancashire, which was notable for the manufacture of early steam locomotives.

<span class="mw-page-title-main">Bolton Steam Museum</span> Museum in England

Bolton Steam Museum is a museum in Bolton, Greater Manchester, England, which houses a variety of preserved steam engines. Based in the cotton store of the former Atlas Mill in Mornington Road, it is owned and run by the Northern Mill Engine Society (NMES).

McNaught or MacNaught or Macnaught is a Scottish surname deriving from MacNeachdan which is a Gaelic patronymic for the Pictish name Nechdan meaning 'Pure'. It was anglicised as Macnaughten and variations of the name have led to Macnaught and MacKnight. The MacNaughts of Kilquhanty were a branch of the Clan Macnaghten. Notable people with the surname include:

<span class="mw-page-title-main">George Saxon & Co</span> English engineering company

George Saxon & Co was an English engineering company that manufactured stationary steam engines. It was based in the Openshaw district of Manchester. The company produced large steam-driven engines for power stations and later for textile mills in Lancashire and elsewhere.

Urmson & Thompson was a company that manufactured stationary steam engines. It was based in Oldham, Lancashire, England. The company were general millwrights, also producing some steam engines during the 19th century and after 1904 produced large steam-driven engines for textile mills in Oldham.

<span class="mw-page-title-main">Yates and Thom</span> British manufacturer of heavy machinery

Yates & Thom Ltd, or Yates of Blackburn, was a British manufacturer of stationary steam engines and boilers at the Canal Ironworks, Blackburn, Lancashire, England.

William McNaught (1813–1881) was a Scottish engineer, from Glasgow, who patented a compound steam engine in 1845. This was a technique of improving the efficiency of a standard simple Boulton & Watt beam engine. The engine was compounded by adding a high-pressure cylinder between the support column and the flywheel, on the side opposite the low-pressure cylinder. This improvement could be retrospectively fitted to existing engines.

Alexander Petrie and Co was a company that manufactured stationary steam engines. It was based in Rochdale, Greater Manchester in England. The company did general millwrighting, producing some steam engines during the 19th century. Around 1845, their superintendent, William McNaught, was producing large steam-driven beam engines for textile mills in Rochdale.

<span class="mw-page-title-main">W & J Galloway & Sons</span> British manufacturer of steam engines and boilers

W & J Galloway and Sons was a British manufacturer of steam engines and boilers based in Manchester, England. The firm was established in 1835 as a partnership of two brothers, William and John Galloway. The partnership expanded to encompass their sons and in 1889 it was restructured as a limited liability company. It ceased trading in 1932.

<span class="mw-page-title-main">J & E Wood</span>

J & E Wood was a company that manufactured stationary steam engines. It was based in the Bolton in Greater Manchester, England. The company produced large steam-driven engines for textile mills in Lancashire and elsewhere.

<span class="mw-page-title-main">Ellenroad Mill</span> Cotton mill in Newhey, Milnrow, Rochdale, England

Ellenroad Mill was a cotton spinning mill in Newhey, a village in the Milnrow area of Rochdale, England. It was built as a mule spinning mill in 1890 by Stott and Sons and extended in 1899. It was destroyed by fire on 19 January 1916. When it was rebuilt, it was designed and equipped as a ring spinning mill.

<span class="mw-page-title-main">William Roberts & Co of Nelson</span>

William Roberts and Company of Phoenix Foundry in Nelson, Lancashire, England, produced many of the steam engines that powered cotton weaving and spinning mills of Pendle and neighbouring districts. Industrial historian Mike Rothwell has called Phoenix foundry “Nelson’s most significant engineering site”.

<span class="mw-page-title-main">Joshua Routledge</span>

Joshua Routledge was an engineer and inventor of the early 19th century during the Industrial Revolution.

References

Notes
  1. 1 2 3 "William McNaught (1811-1888) - Graces Guide". www.gracesguide.co.uk. 2016. Retrieved 19 July 2022.
  2. 1 2 "Engineering". Link4Life. Rochdale Boroughwide Cultural Trust. Archived from the original on 18 July 2011. Retrieved 19 July 2022.
  3. Hills 1993 , p. 175
  4. Pickles 1979
Bibliography