This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these messages)
|
Air pollution is a concern in British Columbia, Canada because of its effects on health and visibility. Air quality is influenced in British Columbia(BC) by numerous mountain ranges and valleys, which complicate atmospheric pollution dispersion and can lead to high concentrations of pollutants such as particulate matter from wood smoke (especially during stagnant atmospheric conditions/inversions).
Air quality in much of BC is good compared to many areas of North America. This is particularly true for cities in BC such as the Greater Vancouver area and Victoria. [ citation needed ]
Valley communities such as Golden may experience periods of poor air quality, particularly during stagnant atmospheric conditions. Two communities currently exceed the federal standards for maximum safe levels of pollutants: Prince George for particulate matter (PM2.5), and the community of Hope in the lower Fraser Valley for ozone. Other communities are close to the PM2.5 standard, such as Quesnel, Kamloops, Chiliwack, and Langley. [ citation needed ]
Hourly air quality monitoring results are available for the lower Fraser Valley. Air quality information is available for the rest of the province from the Ministry of the Environment. The BC Lung Association produces an annual State of the Air Report for BC. This report is a collaboration between the provincial, federal and regional governments responsible for air quality management in BC.
An important recent consideration is the nearly complete replacement of the TEOM (Tapered Element Oscillating Microbalance) pollution measurement instruments once relied on by BC with newer SHARP FEM (Federal Equivalency Method) monitors. The TEOMs often under-reported particulate matter measurements by 50%. A process of colocation and auditing of operations will make the new and higher readings more reliable. A more complete understanding of conditions will lead to a greater understanding of likely impacts and may drive increased regulatory efforts.[ citation needed ]
These measurements sample ambient air – that is, air where people might breathe it – and are usually reliable and available. They do not include the air in workplaces. A possibly trickier assessment is determining where pollution comes from, often a question addressed by emissions inventories. In BC and other Canadian jurisdictions, facilities are required to report their toxic substance emissions to Environment Canada on an annual basis. Self-reporting tends to lead to under-reporting, notwithstanding which the inventory resulting tracks releases in an interesting way. At the NPRI we can see a complex example in the historical report summary of Canfor's NPRI reporting in recent years. Criticisms of such reporting has been done by Scott Vaughan, Commissioner for Sustainable Development and the Environment in his Fall 2009 report.
It is worth noting that the government only recently began addressing air quality when the problem was increasingly associated with health issues and generated complaints about smog and poor visibility. [1] There is no major agency for air quality at the provincial and federal levels. The BC Ministry of Environment added a branch in 1980 for air quality and it received a small budget annually for almost a decade. After the 1990s, resources allocated to air quality grew rapidly and this was particularly the case for the Greater Vancouver Regional District (GVRD) through its air management plan. [1]
Air pollution sources in British Columbia may be divided between those external to the province, such as transboundary pollution, [2] and those internal to it; and between anthropogenic (man-made) sources and natural sources. External anthropogenic sources include combustion particles and gases from industrial sources in the province of Alberta or the U.S. state of Washington. Toxic substances form part of these pollutants such as tetrachloroethylene and trichloroethylene as well as nitrogen monoxide and sulfur dioxide, which Canada seeks to minimize through caps and its tradable permit system. [3] Mount St. Helens has been a significant external natural source: although located entirely in the United States, its eruption created air pollution in parts of British Columbia.
Exhaust from internal combustion engines (mainly automobiles and trucks, as well as marine vessels in coastal waters) is a major internal anthropogenic source. Other human-caused sources include: Industrial, agricultural (e.g. manure spreading), commercial operations (e.g., dry cleaners and gas stations) and home heating appliances (furnaces, fireplaces). Radionuclides are generally not a concern with regards to air pollution issues in BC, except for radon gas. Background pollution occurs in areas not directly affected by pollution sources.
The Canadian Constitution does not clearly specify the level of government that has responsibility for environmental protection in Canada. As such, pollution law in British Columbia is divided among local, regional, provincial, federal and international jurisdictions, each with its own focus and, at times, overlapping concerns. Legislation may be enacted at any of these levels.
Provincial environmental regulation is largely contained in BC's Environmental Management Act, which defines an air contaminant as follows:
"air contaminant" means a substance that is introduced into the air and that
The EMA is the enabling legislation for BC's industrial emissions permits.
Federal pollution law is largely embodied in the Canadian Environmental Protection Act (CEPA) and its associated schedules. The act of scheduling a toxin under CEPA starts a process of elimination or virtual elimination from the Canadian environment.
The National Pollutant Release Inventory indexes sources by pollutant and location.
In 2012 the CCME started the Air Quality Management System process. This provided for the evaluation of PM and ozone measurements at many sites in BC and across Canada. In 2015 the first air zone reports for BC were published. They show that Crofton, Smithers, and Vanderhoof are not meeting the PM2.5 standard. This is a trigger for corrective intervention. The exact type of intervention is not yet determined, partly because it's a new process and partly because of variable site-specific factors. It's not likely that one size fits all in correction.
Pollution law governing emissions from marine vessels is complicated; Transport Canada holds primary authority for regulating ship traffic in Canada, while the International Maritime Organization governs global shipping rules (including pollution from marine vessels). Environment Canada and other agencies are working to better understand and address this issue, which is increasingly important due to growing international trade.
Within the province, various Regional Districts and municipalities have enacted laws to control pollution. There are also area-based plans to manage pollution along geographic lines that recognize airsheds instead of political boundaries. This system is especially relevant to BC because of its mountainous topography. The BC Environmental Management Act recognizes airsheds and notes that managers under the Act "may give consideration" to them, but their full legal status is uncertain. Some plans have had a considerable effect, and this trend is likely to continue.
The Greater Vancouver Regional District (GVRD) has a clearly defined role in air pollution control and has delegated authority from the province (Montreal is the only other jurisdiction in Canada with this delegated authority). The Fraser Valley Regional District has delegated authority to plan but not manage air quality.
British Columbia is a participant in the Canadian Council of Ministers of the Environment (CCME), which includes processes for fine particulates and ground-level ozone. Because BC generally has lower levels of pollution than the standards set by the Environmental Protection Act, the CI/KCAC ("Continuous Improvement" and "Keeping Clean Areas Clean") principle of the federal strategy is of special importance.
International law and treaties such as the Kyoto Accord further affect air pollution in BC.
The precautionary principle embodied in international agreements is gaining recognition in Canada and BC as a guide to interpreting pollution law. Its exact application is uncertain but it is cited in the preamble to the Canadian Environmental Protection Act as a principle guiding the Government of Canada.
The health effects of air pollution vary with the size and characteristics of the exposed population, the specific pollutant or mix of pollutants and the concentration of pollutants, both in the short term and the long term. Children, the elderly, and people with pre-existing health problems are known to be especially vulnerable. Generally speaking, respiratory and cardiac effects are the most significant, but there is increasing evidence that air pollutants play a role in cancer and genetic mutations, some of which can be inherited. [4] Cumulative and synergistic effects are hard to study: ethical concerns rule out some otherwise desirable experimental procedures, and multi-pollutant studies are complex and expensive, leaving these areas less well understood experimentally. Sometimes ecologic studies can contribute to our understanding of combined effects. In the early 1990s, the province commissioned Dr. Sverre Vedal, then a researcher at the University of British Columbia, to investigate air pollution in BC, and to assess and to rank its health impacts. His report [5] concluded that particulate pollution was the gravest concern, estimating an annual toll of 82 deaths, among other consequences. As of late 2004, the province continues its long-term effort to control sources of particulates. The varying population and topography have given rise to different problems in different areas, necessitating differing approaches. Other important air pollutants are oxides of nitrogen and of sulphur, volatile organic compounds of various kinds, polycyclic aromatic hydrocarbons, dioxins and furans. Exposure and health effects of these vary by area and sometimes by season.
Recent air pollution research in Canada and other jurisdictions was summarized by Health Canada in October 2003 in its report Human Health Effects of Fine Particulate Matter, [6] which has informed standards-setting deliberations of the CCME. Research in British Columbia has been ongoing since at least 1990. The BC Lung Association has commissioned work in this field, including a 2003 analysis by Dr. David Bates and others, Health and Air Quality 2002—Phase 1. [7] The second phase of this report was to deal with health effects of fine particulates in northern BC communities, where biomass combustion is arguably the most important source. Ray Copes and Catherine Elliott estimated mortality in northern BC in their report. [8]
At the end of 2004, Provincial Health Officer Dr. Perry Kendall released his annual report titled Air Quality in British Columbia, A Public Health Perspective. [9] It includes estimates of the health impact of air pollution in BC. He estimates that 71–110 deaths are attributable to air pollution. This figure excludes effects of indoor air pollution and environmental tobacco smoke exposure.
On a national and regional scale, the Canadian Medical Association in 2008 quantified the illness costs of air pollution. [10] The report includes business-as-usual projections of the increased burden in the coming decades.
The Air Quality Health Index or (AQHI) is a scale designed to help understand the impact of air quality on health. It is a health protection tool used to make decisions to reduce short-term exposure to air pollution by adjusting activity levels during increased levels of air pollution. The Air Quality Health Index also provides advice on how to improve air quality by proposing a behavioral change to reduce the ecological footprint. This index pays particular attention to people who are sensitive to air pollution. It provides them with advice on how to protect their health during air quality levels associated with low, moderate, high, and very high health risks. [11]
The Air Quality Health Index or "AQHI" is a federal program jointly coordinated by Health Canada and Environment Canada. However, the AQHI program would not be possible without the commitment and support of the provinces, municipalities, and NGOs. From air quality monitoring to health risk communication and community engagement, local partners are responsible for the vast majority of work-related to AQHI implementation.
Originally launched as a pilot project in the British Columbia Interior and Nova Scotia in 2005, it is currently implemented in 49 locations across Canada. [12]
The Air Quality Health Index provides a number from 1 to 10+ to indicate the level of health risk associated with local air quality. Occasionally, when the amount of air pollution is abnormally high, the number may exceed 10. The AQHI provides a local air quality current value as well as a local air quality maximums forecast for today, tonight, and tomorrow and provides associated health advice.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | + |
Risk: | Low (1–3) | Moderate (4–6) | High (7–10) | Very high (above 10) |
As it is now known that even low levels of air pollution can trigger discomfort for the sensitive population, the index has been developed as a continuum: The higher the number, the greater the health risk and need to take precautions. The index describes the level of health risk associated with this number as 'low', 'moderate', 'high' or 'very high', and suggests steps that can be taken to reduce exposure. [11]
Health Risk | Air Quality Health Index | Health Messages | |
---|---|---|---|
At Risk population | *General Population | ||
Low | 1–3 | Enjoy your usual outdoor activities. | Ideal air quality for outdoor activities |
Moderate | 4–6 | Consider reducing or rescheduling strenuous activities outdoors if you are experiencing symptoms. | No need to modify your usual outdoor activities unless you experience symptoms such as coughing and throat irritation. |
High | 7–10 | Reduce or reschedule strenuous activities outdoors. Children and the elderly should also take it easy. | Consider reducing or rescheduling strenuous activities outdoors if you experience symptoms such as coughing and throat irritation. |
Very high | Above 10 | Avoid strenuous activities outdoors. Children and the elderly should also avoid outdoor physical exertion. | Reduce or reschedule strenuous activities outdoors, especially if you experience symptoms such as coughing and throat irritation. |
Air Quality Health Index Categories and Health Messages – Environment and Climate Change Canada |
A pollutant or novel entity is a substance or energy introduced into the environment that has undesired effects, or adversely affects the usefulness of a resource. These can be both naturally forming or anthropogenic in origin. Pollutants result in environmental pollution or become public health concerns when they reach a concentration high enough to have significant negative impacts.
Indoor air quality (IAQ) is the air quality within buildings and structures. Poor indoor air quality due to indoor air pollution is known to affect the health, comfort, and well-being of building occupants. It has also been linked to sick building syndrome, respiratory issues, reduced productivity, and impaired learning in schools. Common pollutants of indoor air include: secondhand tobacco smoke, air pollutants from indoor combustion, radon, molds and other allergens, carbon monoxide, volatile organic compounds, legionella and other bacteria, asbestos fibers, carbon dioxide, ozone and particulates.
An air quality index (AQI) is an indicator developed by government agencies to communicate to the public how polluted the air currently is or how polluted it is forecast to become. As air pollution levels rise, so does the AQI, along with the associated public health risk. Children, the elderly and individuals with respiratory or cardiovascular problems are typically the first groups affected by poor air quality. When the AQI is high, governmental bodies generally encourage people to reduce physical activity outdoors, or even avoid going out altogether. When wildfires result in a high AQI, the use of a mask outdoors and an air purifier indoors are also encouraged.
The Air Pollution Index is a simple and generalized way to describe the air quality, which is used in Malaysia. It is calculated from several sets of air pollution data and was formerly used in mainland China and Hong Kong. In mainland China the API was replaced by an updated air quality index in early 2012 and on 30 December 2013 Hong Kong moved to a health based index.
The Pollutant Standards Index (PSI) is a type of air quality index used in Singapore, which is a number used to indicate the level of pollutants in air. Initially PSI was based on five air pollutants, but since 1 April 2014 it has also included fine particulate matter (PM2.5).
Pollution in China is one aspect of the broader topic of environmental issues in China. Various forms of pollution have increased following the industrialisation of China, causing widespread environmental and health problems.
Air pollution in Hong Kong is considered a serious problem. In 2004, visibility was less than eight kilometers for 30 per cent of the year. Cases of asthma and bronchial infections have soared due to reduced air quality. However, in recent years, the hours of reduced visibility in Hong Kong have decreased by significant amounts compared to the previous ten years.
Air pollution is the contamination of air due to the presence of substances called pollutants in the atmosphere that are harmful to the health of humans and other living beings, or cause damage to the climate or to materials. It is also the contamination of the indoor or outdoor environment either by chemical, physical, or biological agents that alters the natural features of the atmosphere. There are many different types of air pollutants, such as gases, particulates and biological molecules. Air pollution can cause diseases, allergies, and even death to humans; it can also cause harm to other living organisms such as animals and crops, and may damage the natural environment or built environment. Air pollution can be caused by both human activities and natural phenomena.
Air pollution is the introduction of chemicals, particulate matter, or biological materials into the atmosphere that cause harm or discomfort to humans or other living organisms, or damage ecosystems. Health problems attributed to air pollution include premature death, cancer, organ failure, infections, behavioral changes, and other diseases. These health effects are not equally distributed across the U.S. population; there are demographic disparities by race, ethnicity, socioeconomic status, and education. Air pollution can derive from natural sources, such as wildfires and volcanoes, or from anthropogenic sources. Anthropogenic air pollution has affected the United States since the beginning of the Industrial Revolution.
The environmental impact of paper are significant, which has led to changes in industry and behaviour at both business and personal levels. With the use of modern technology such as the printing press and the highly mechanized harvesting of wood, disposable paper became a relatively cheap commodity, which led to a high level of consumption and waste. The rise in global environmental issues such as air and water pollution, climate change, overflowing landfills and clearcutting have all lead to increased government regulations. There is now a trend towards sustainability in the pulp and paper industry as it moves to reduce clear cutting, water use, greenhouse gas emissions, fossil fuel consumption and clean up its influence on local water supplies and air pollution.
Air quality laws govern the emission of air pollutants into the atmosphere. A specialized subset of air quality laws regulate the quality of air inside buildings. Air quality laws are often designed specifically to protect human health by limiting or eliminating airborne pollutant concentrations. Other initiatives are designed to address broader ecological problems, such as limitations on chemicals that affect the ozone layer, and emissions trading programs to address acid rain or climate change. Regulatory efforts include identifying and categorising air pollutants, setting limits on acceptable emissions levels, and dictating necessary or appropriate mitigation technologies.
Air Pollution in Mexico City has been of concern to the city's population and health officials for decades. In the 20th century, Mexico City's population rapidly increased as industrialization brought thousands of migrants from all over the world. Such a rapid and unexpected growth led to the UN declaring Mexico City as the most polluted city in the world in 1992. This was partly due to Mexico City's high altitude, which causes its oxygen levels to be 25% lower. Carbon-based fuels also do not combust completely. Other factors include the proliferation of vehicles, rapid industrial growth, and the population boom. The Mexican government has several active plans to reduce emission levels which require citizen participation, vehicular restrictions, increase of green areas, and expanded bicycle accessibility.
Air pollution is the release of pollutants into the air that are detrimental to human health and the Earth. In Canada, air pollution is regulated by standards set by the Canadian Council of Ministers of the Environment (CCME), an inter-governmental body of federal, provincial and territorial Ministers responsible for the environment. Air pollution from the United States and to lesser extent Canada; caused by metal smelting, coal-burning for utilities, and vehicle emissions has resulted in acid rain, has severely impacted Canadian waterways, forest growth, and agricultural productivity.
Pollution is an environmental issue in Canada. It has posed health risks to the Canadian population and is an area of concern for Canadian lawmakers. Air, water and soil pollution as well as the associated health effects are prominent points of contention in modern Canadian society.
Particulates or atmospheric particulate matter are microscopic particles of solid or liquid matter suspended in the air. The term aerosol refers to the particulate/air mixture, as opposed to the particulate matter alone, though it is sometimes defined as a subset of aerosol terminology. Sources of particulate matter can be natural or anthropogenic. They have impacts on climate and precipitation that adversely affect human health, in ways additional to direct inhalation.
The Air Quality Health Index (AQHI) is a scale designed in Canada to help understand the impact of air quality on health. It is a health protection tool used to make decisions to reduce short-term exposure to air pollution by adjusting activity levels during increased levels of air pollution. The Air Quality Health Index also provides advice on how to improve air quality by proposing behavioral change to reduce the environmental footprint. This index pays particular attention to people who are sensitive to air pollution. It provides them with advice on how to protect their health during air quality levels associated with low, moderate, high and very high health risks.
The first Canadian National Ambient Air Quality Objectives were developed in the mid-1970s. These objectives were set for various air pollutants. The NAAQO had three levels indicating severity and also evaluated effect levels.
The 2013 Eastern China smog was a severe air pollution episode that affected East China, including all or parts of the municipalities of Shanghai and Tianjin, and the provinces of Hebei, Shandong, Jiangsu, Anhui, Henan, and Zhejiang, during December 2013. A lack of cold air flow, combined with slow-moving air masses carrying industrial emissions, collected airborne pollutants to form a thick layer of smog over the region. Levels of PM2.5 particulate matter averaged over 150 micrograms per cubic metre; in some areas, they were 300 to 500 micrograms per cubic metre.
Air quality in Utah is often some of the worst in the United States. Poor air quality in Utah is due to the mountainous topography which can cause pollutants to build up near the surface combined with the prevalence of emissions from gasoline- and diesel-powered vehicles, especially older models. Burning wood fuel for home heating can also contribute significantly to poor air quality. Homes heated with wood contribute about 3000 times the amount of pollution as homes heated with natural gas. About 50% of air pollution in Salt Lake County is from vehicles.
Particulate pollution is pollution of an environment that consists of particles suspended in some medium. There are three primary forms: atmospheric particulate matter, marine debris, and space debris. Some particles are released directly from a specific source, while others form in chemical reactions in the atmosphere. Particulate pollution can be derived from either natural sources or anthropogenic processes.
{{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link)