Formation | 2005 |
---|---|
Headquarters | Ottawa, Ontario, Canada |
Steven Guilbeault | |
Website | www |
The Air Quality Health Index (AQHI) is a scale designed in Canada to help understand the impact of air quality on health. It is a health protection tool used to make decisions to reduce short-term exposure to air pollution by adjusting activity levels during increased levels of air pollution. The Air Quality Health Index also provides advice on how to improve air quality by proposing behavioral change to reduce the environmental footprint. This index pays particular attention to people who are sensitive to air pollution. It provides them with advice on how to protect their health during air quality levels associated with low, moderate, high and very high health risks. [1]
Air quality in Canada has historically been reported by the US Air Quality Index in various provinces. Significantly, AQI values reflect air quality management objectives, which are based on the lowest achievable emissions rate, and not exclusively concern for human health. The AQHI was created with a different goal - to report on the specific health risks posed by air pollution. As such, the AQHI represents a paradigm shift in communicating air quality information to the public.
The Air Quality Health Index (AQHI) is a federal program jointly coordinated by Health Canada and Environment Canada. However, the AQHI program would not be possible without the commitment and support of the provinces, municipalities and NGOs. From air quality monitoring to health risk communication and community engagement, local partners are responsible for the vast majority of work related to AQHI implementation.
The AQHI has been rolled out across Canada and has replaced the AQI as the public face of air quality information.
Originally launched as a pilot project in the British Columbia Interior in 2005 followed by Nova Scotia in 2006 and Toronto in 2007, [2] as of 2016 it was implemented in 122 locations across Canada. [3]
The Air Quality Health Index provides a number from 1 to 10+ to indicate the level of health risk associated with local air quality. Occasionally, when the amount of air pollution is abnormally high, the number may exceed 10. The AQHI provides a local air quality current value as well as a local air quality maximums forecast for today, tonight and tomorrow and provides associated health advice.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | + |
Risk: | Low (1-3) | Moderate (4-6) | High (7-10) | Very high (above 10) |
As it is now known that even low levels of air pollution can trigger discomfort for the sensitive population, the index has been developed as a continuum: The higher the number, the greater the health risk and need to take precautions. The index describes the level of health risk associated with this number as 'low', 'moderate', 'high' or 'very high', and suggests steps that can be taken to reduce exposure. [1]
The formulation of the national AQHI is based on the observed relationship of nitrogen dioxide (NO2), ground-level ozone (O3) and fine particulate matter (PM2.5) with mortality from an analysis of several Canadian cities. Significantly, all three of these pollutants can pose health risks, even at low levels of exposure, especially among those with pre-existing health problems. [4]
When developing the AQHI, Health Canada's original analysis of health effects included five major air pollutants: airborne particulate matter, ozone, and nitrogen dioxide (NO2), as well as sulphur dioxide (SO2), and carbon monoxide (CO). The latter two pollutants provided little information in predicting health effects and were removed from the AQHI formulation.
The AQHI does not measure the effects of odour, pollen, dust, heat or humidity.
The national AQHI is based on three-hour average concentrations of ground-level ozone (O3), nitrogen dioxide (NO2), and fine particulate matter (PM2.5). O3 and NO2 are measured in parts per billion (ppb) while PM2.5 is measured in micrograms per cubic metre (μg/m3).
The AQHI is calculated on a community basis (each community may have one or more monitoring stations).
First, the average concentration of the three substances (O3, NO2, PM2.5) is calculated at each station within a community for the 3 preceding hours. This is considered valid only if at least 2 out of 3 hours are available at the station. If more than 1 of the preceding 3 hours is missing the station average is set to "Not Available". This part of the process results in three "station parameter averages" for each station.
Second, the 3 hour "community average" for each parameter is calculated from the 3 hour substance averages at the available stations. If no stations are available for a parameter, that parameter is set to "Not Available". This part of the process results in three community parameter averages.
Third, if all three community parameter averages are available, a community AQHI is calculated. The formula is:
The result is then rounded to the nearest whole number.
Alberta has modified AQHI reporting to better suit the needs of the Province. Because of Alberta's energy based economy other pollutants are also considered when reporting the AQHI.
Alberta also has rapidly changing air quality conditions quite often (for example during wildfire season) so, Alberta's AQHI needs to be more responsive than the national AQHI, which is based on a three-hour average.
In order to meet these needs, the individual pollutant concentrations are compared to Alberta's Ambient Air Quality Objectives (AAQOs). The national AQHI is used most of the time; however, if hourly air pollutant concentrations are higher than Alberta's AAQOs, the AQHI value is replaced (overridden) with the appropriate "High" or "Very High" risk value. This can occur for the following pollutants (when they exceed the noted concentrations):
In Alberta, special community messaging is used when the level of specific pollutants is higher than specified odour or visibility thresholds but the AQHI is rated as "Low" or "Moderate" risk. This messaging is used for the following pollutants (when they exceed the noted concentrations):
An example of this special odour/visibility messaging can be: "While you may detect an odour or change in visibility or clarity, enjoy your outdoor activities unless you experience symptoms."
The AQHI is aimed towards two populations: 1. The "general" population; and 2. The "at-risk" populations. The latter consists of children, the elderly and people with existing respiratory or cardiovascular conditions, such as those with asthma, and people suffering from diabetes, heart disease or lung disease.
Children are more vulnerable to air pollution: they have less-developed respiratory and defense systems. Because of their size, they inhale more air per kilogram of body weight than adults. Their elevated metabolic rate and young defense systems make them more susceptible to air pollution.
Seniors are also at a higher risk because of the weakening of the heart, lungs and immune system and increased likelihood of health problems such as heart and lung disease.
Exposure to air pollutants can cause a range of symptoms. People with lung or heart disease may experience increased frequency and/or severity of symptoms, and increased medication requirements. It is recommended that those susceptive should take greater precautions. [7]
Environment Canada recommends looking for outdoor air quality by checking the AQHI before heading off to work or play as well as to use the forecasts to plan activities, whether over the next hour or the next day. Seniors, parents, those with asthma, and people suffering from diabetes, heart or lung disease, can use the AQHI to assess the immediate risk air pollution poses on their health and take steps to lessen that risk. The AQHI is also recommended for healthy, fit and active people to consult to decide when it is best to exercise or work outdoor.
The best way for someone to use the AQHI is to regularly check the current index value, to pay attention to personal symptoms and self-calibrate to the reported current AQHI value. For example, if symptoms are experienced when the index is a 6, then precaution should be taken when the index is at a 6 or higher by following the corresponding health messages. Then, when an individual knows what number triggers health symptoms, to get in the habit of checking the maximum forecast to plan activities ahead of time.
Smog, or smoke fog, is a type of intense air pollution. The word "smog" was coined in the early 20th century, and is a portmanteau of the words smoke and fog to refer to smoky fog due to its opacity, and odor. The word was then intended to refer to what was sometimes known as pea soup fog, a familiar and serious problem in London from the 19th century to the mid-20th century, where it was commonly known as a London particular or London fog. This kind of visible air pollution is composed of nitrogen oxides, sulfur oxide, ozone, smoke and other particulates. Man-made smog is derived from coal combustion emissions, vehicular emissions, industrial emissions, forest and agricultural fires and photochemical reactions of these emissions.
Ground-level ozone (O3), also known as surface-level ozone and tropospheric ozone, is a trace gas in the troposphere (the lowest level of the Earth's atmosphere), with an average concentration of 20–30 parts per billion by volume (ppbv), with close to 100 ppbv in polluted areas. Ozone is also an important constituent of the stratosphere, where the ozone layer (2 to 8 parts per million ozone) exists which is located between 10 and 50 kilometers above the Earth's surface. The troposphere extends from the ground up to a variable height of approximately 14 kilometers above sea level. Ozone is least concentrated in the ground layer (or planetary boundary layer) of the troposphere. Ground-level or tropospheric ozone is created by chemical reactions between NOx gases (oxides of nitrogen produced by combustion) and volatile organic compounds (VOCs). The combination of these chemicals in the presence of sunlight form ozone. Its concentration increases as height above sea level increases, with a maximum concentration at the tropopause. About 90% of total ozone in the atmosphere is in the stratosphere, and 10% is in the troposphere. Although tropospheric ozone is less concentrated than stratospheric ozone, it is of concern because of its health effects. Ozone in the troposphere is considered a greenhouse gas, and may contribute to global warming.
Indoor air quality (IAQ) is the air quality within buildings and structures. Poor indoor air quality due to indoor air pollution is known to affect the health, comfort, and well-being of building occupants. It has also been linked to sick building syndrome, respiratory issues, reduced productivity, and impaired learning in schools. Common pollutants of indoor air include: secondhand tobacco smoke, air pollutants from indoor combustion, radon, molds and other allergens, carbon monoxide, volatile organic compounds, legionella and other bacteria, asbestos fibers, carbon dioxide, ozone and particulates. Source control, filtration, and the use of ventilation to dilute contaminants are the primary methods for improving indoor air quality.
Nitrogen dioxide is a chemical compound with the formula NO2. One of several nitrogen oxides, nitrogen dioxide is a reddish-brown gas. It is a paramagnetic, bent molecule with C2v point group symmetry. Industrially, NO2 is an intermediate in the synthesis of nitric acid, millions of tons of which are produced each year, primarily for the production of fertilizers.
Air pollution is a concern in British Columbia, Canada because of its effects on health and visibility. Air quality is influenced in British Columbia (BC) by numerous mountain ranges and valleys, which complicate atmospheric pollution dispersion and can lead to high concentrations of pollutants such as particulate matter from wood smoke.
The U.S. National Ambient Air Quality Standards are limits on atmospheric concentration of six pollutants that cause smog, acid rain, and other health hazards. Established by the United States Environmental Protection Agency (EPA) under authority of the Clean Air Act, NAAQS is applied for outdoor air throughout the country.
An air quality index (AQI) is an indicator developed by government agencies to communicate to the public how polluted the air currently is or how polluted it is forecast to become. As air pollution levels rise, so does the AQI, along with the associated public health risk. Children, the elderly and individuals with respiratory or cardiovascular problems are typically the first groups affected by poor air quality. When the AQI is high, governmental bodies generally encourage people to reduce physical activity outdoors, or even avoid going out altogether. When wildfires result in a high AQI, the use of a mask outdoors and an air purifier indoors are also encouraged.
The Air Pollution Index is a simple and generalized way to describe the air quality, which is used in Malaysia. It is calculated from several sets of air pollution data and was formerly used in mainland China and Hong Kong. In mainland China the API was replaced by an updated air quality index in early 2012 and on 30 December 2013 Hong Kong moved to a health based index.
The Pollutant Standards Index (PSI) is a type of air quality index used in Singapore, which is a number used to indicate the level of pollutants in air. Initially PSI was based on five air pollutants, but since 1 April 2014 it has also included fine particulate matter (PM2.5).
Air pollution is the contamination of air due to the presence of substances called pollutants in the atmosphere that are harmful to the health of humans and other living beings, or cause damage to the climate or to materials. It is also the contamination of the indoor or outdoor environment either by chemical, physical, or biological agents that alters the natural features of the atmosphere. There are many different types of air pollutants, such as gases, particulates and biological molecules. Air pollution can cause diseases, allergies, and even death to humans; it can also cause harm to other living organisms such as animals and crops, and may damage the natural environment or built environment. Air pollution can be caused by both human activities and natural phenomena.
Air pollution is the introduction of chemicals, particulate matter, or biological materials into the atmosphere, causing harm or discomfort to humans or other living organisms, or damaging ecosystems. Air pollution can cause health problems including, but not limited to, infections, behavioral changes, cancer, organ failure, and premature death. These health effects are not equally distributed across the U.S. population; there are demographic disparities by race, ethnicity, socioeconomic status, and education. Air pollution can derive from natural sources, or anthropogenic sources. Anthropogenic air pollution has affected the United States since the beginning of the Industrial Revolution.
The Índice Metropolitano de la Calidad del Aire or IMECA, in English meaning the Metropolitan Index of Air Quality, is the reference value system for the levels of air pollution in the Mexico City Metropolitan Area, within the Valley of Mexico.
Air Pollution in Mexico City has been of concern to the city's population and health officials for decades. In the 20th century, Mexico City's population rapidly increased as industrialization brought thousands of migrants from all over the world. Such a rapid and unexpected growth led to the UN declaring Mexico City as the most polluted city in the world in 1992. This was partly due to Mexico City's high altitude, which causes its oxygen levels to be 25% lower. Carbon-based fuels also do not combust completely. Other factors include the proliferation of vehicles, rapid industrial growth, and the population boom. The Mexican government has several active plans to reduce emission levels which require citizen participation, vehicular restrictions, increase of green areas, and expanded bicycle accessibility.
Air pollution is the release of pollutants into the air that are detrimental to human health and the Earth. In Canada, air pollution is regulated by standards set by the Canadian Council of Ministers of the Environment (CCME), an inter-governmental body of federal, provincial and territorial Ministers responsible for the environment. Air pollution from the United States and to lesser extent Canada; caused by metal smelting, coal-burning for utilities, and vehicle emissions has resulted in acid rain, has severely impacted Canadian waterways, forest growth, and agricultural productivity.
The first Canadian National Ambient Air Quality Objectives were developed in the mid-1970s. These objectives were set for various air pollutants. The NAAQO had three levels indicating severity and also evaluated effect levels.
The 2013 Eastern China smog was a severe air pollution episode that affected East China, including all or parts of the municipalities of Shanghai and Tianjin, and the provinces of Hebei, Shandong, Jiangsu, Anhui, Henan, and Zhejiang, during December 2013. A lack of cold air flow, combined with slow-moving air masses carrying industrial emissions, collected airborne pollutants to form a thick layer of smog over the region. Levels of PM2.5 particulate matter averaged over 150 micrograms per cubic metre; in some areas, they were 300 to 500 micrograms per cubic metre.
Air pollution measurement is the process of collecting and measuring the components of air pollution, notably gases and particulates. The earliest devices used to measure pollution include rain gauges, Ringelmann charts for measuring smoke, and simple soot and dust collectors known as deposit gauges. Modern air pollution measurement is largely automated and carried out using many different devices and techniques. These range from simple absorbent test tubes known as diffusion tubes through to highly sophisticated chemical and physical sensors that give almost real-time pollution measurements, which are used to generate air quality indexes.
The World Health Organization guidelines were most recently updated in 2021. The guidelines offer guidance about these air pollutants: particulate matter (PM), ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2) and carbon monoxide (CO). The WHO first released the air quality guidelines in 1987, then updated them in 1997. The reports provide guidelines intending to give guidelines to reduce the health effects of air pollution.
Air pollution in Taiwan is mostly derived from sources of domestic combustion, primarily the burning of fossil fuels. Taiwan's topography has been noted to be a contributing factor to its air pollution problem, leading to poor dispersal and trapping pollutants. Taipei, Taiwan's capital and largest city for example, is surrounded by mountains, and other industrial centers along the northern and western coasts of Taiwan are surrounded by high mountains.
Particulate pollution is pollution of an environment that consists of particles suspended in some medium. There are three primary forms: atmospheric particulate matter, marine debris, and space debris. Some particles are released directly from a specific source, while others form in chemical reactions in the atmosphere. Particulate pollution can be derived from either natural sources or anthropogenic processes.