Armstrong Whitworth 12-inch 40-calibre naval gun

Last updated

Type 41 12-inch 40-calibre
BL 12-inch Mk IX gun
Japanese battleship Fuji Forward 12-inch guns.jpg
Forward guns of Fuji
Type Naval gun
Place of originUnited Kingdom, later licence-produced in Japan
Service history
In service1900–1945
Used by Royal Navy
Imperial Japanese Navy
Regia Marina
Wars Russo-Japanese War
World War I
Production history
Designer Elswick Ordnance Company
Designed1898
Manufacturer Elswick Ordnance Company
Vickers
Woolwich Arsenal
Specifications
Mass49 long tons (50 t)
Barrel  length40-foot-5-inch (12.32 m) bore (40 calibres)

Shell 850 pounds (390 kg) separate charges and shell
Calibre 12 inches (305 mm)
Breech Welin interrupted screw
Elevation −5/+15 degrees
Traverse +150/−150 degrees
Rate of fire 1 round per minute
Muzzle velocity Japanese service : 2,400 ft/s (732 m/s)
UK service: 2,481 ft/s (756 m/s), [1] 2,612 ft/s (796 m/s) (King Edward VII class)
Effective firing range15,000 yards (14 km); 15° elevation

The Armstrong Whitworth 12-inch naval gun of 40 calibres length was designed by and manufactured mainly by Armstrong's ordnance branch, Elswick Ordnance Company. It was intended for the Royal Navy's Royal Sovereign-class battleships, but budgetary constraints delayed their introduction. The first units were instead supplied to Japan. As the Type 41 12-inch (305 mm) 40-calibre naval gun it was the standard main battery on several early United Kingdom-built pre-dreadnought battleships of the Imperial Japanese Navy.

Contents

It later entered service with the RN as the 12-inch Mark IX, being fitted to warships of three pre-dreadnought classes prior to World War I. Also, during the war several guns were converted for use as railway guns, and, towards the end of the conflict, for use on the M-class submarine monitors.

The gun also saw service with the Italian Regia Marina , in two classes of pre-dreadnought battleships.

Design and development

The Type 41 12-inch naval gun was produced by Armstrong Whitworth, Elswick, Newcastle upon Tyne, as a slightly modified version of the "EOC G pattern" 12-inch guns used on contemporary Royal Navy battleships.

Japanese service

Japan purchased a total of 44 of these weapons for use on the four ships of the Fuji and Shikishima class, and the battleships Asahi and Mikasa. Each ship carried four guns in twin turrets.

In combat at the Battle of the Yellow Sea in the Russo-Japanese War, the Japanese battleships Asahi, Shikishima and Mikasa all had one of their main guns taken out of action due to premature bore detonations. [2] The cause was traced to faulty fuses, and the problem was rectified prior to the Battle of Tsushima.

The gun was officially designated as "Type 41" from the 41st year of the reign of Emperor Meiji on 25 December 1908. It was further re-designated in centimetres on 5 October 1917 as part of the standardization process for the Imperial Japanese Navy to the metric system.

The Type 41 12-inch gun fired an 850-pound (390 kg) shell, with either an armour-piercing, high-explosive or general-purpose warhead.

United Kingdom service

Forward guns of HMS Queen HMS Queen forward 12-inch guns.jpg
Forward guns of HMS Queen

Royal Navy service

The gun entered service with the Royal Navy as "BL 12 inch gun Mark IX" [note 1] on the following ships :

M-class submarine mounting

Sectioned model showing mounting on submarine HMS M1 HMS M1 submarine model turret.jpg
Sectioned model showing mounting on submarine HMS M1

The gun was in service mounted on the three M-class submarines. HMS M2 and M3 had their guns removed in 1927–28.

Railway gun

Four guns were mounted on railway carriages and used by the British army in World War I on the Western Front.

United Kingdom ammunition

Italian service

Fitted to Vittorio Emanuele VittorioEmanuele002.jpg
Fitted to Vittorio Emanuele

Armstrongs also sold versions of their 12-inch 40-calibre gun to Italy to arm the two Regina Margherita-class (commissioned 1905) and the four Regina Elena-class battleships (commissioned 1908). The version for the Regina Elena class fired a heavier 417 kg (919 lb) shell. The Regina Margheritas were lost during the war, the Regina Elenas scrapped after the war.

See also

Weapons of comparable role, performance and era

Notes

  1. I.e. Mark 9 : Britain used Roman numerals to identify Marks (models) of its ordnance – this was the 9th 12-inch breech-loading naval gun in service with the Royal Navy

Related Research Articles

<span class="mw-page-title-main">Pre-dreadnought battleship</span> Battleships built from the 1880s to 1905

Pre-dreadnought battleships were sea-going battleships built from the mid- to late- 1880s to the early 1900s. Their designs were conceived before the appearance of HMS Dreadnought in 1906 and their classification as "pre-dreadnought" is retrospectively applied. In their day, they were simply known as "battleships" or else more rank-specific terms such as "first-class battleship" and so forth. The pre-dreadnought battleships were the pre-eminent warships of their time and replaced the ironclad battleships of the 1870s and 1880s.

Japanese battleship <i>Mikasa</i> Japanese pre-dreadnought battleship

Mikasa (三笠) is a pre-dreadnought battleship built for the Imperial Japanese Navy (IJN) in the late 1890s, and is the only ship of her class. Named after Mount Mikasa in Nara, Japan, the ship served as the flagship of Vice Admiral Tōgō Heihachirō throughout the Russo-Japanese War of 1904–1905, including the Battle of Port Arthur on the second day of the war and the Battles of the Yellow Sea and Tsushima. Days after the end of the war, Mikasa's magazine accidentally exploded and sank the ship. She was salvaged and her repairs took over two years to complete. Afterwards, the ship served as a coast-defence ship during World War I and supported Japanese forces during the Siberian Intervention in the Russian Civil War.

Japanese battleship <i>Hatsuse</i> Japanese Shikishima-class battleship

Hatsuse was a Shikishima-class pre-dreadnought battleship built for the Imperial Japanese Navy (IJN) in the late 1890s. As Japan lacked the industrial capacity to build such warships, the ship was designed and built in the United Kingdom. She participated in the early stages of the Russo-Japanese War of 1904–1905, including the Battle of Port Arthur on the second day of the war, as the flagship of the 1st Division. Hatsuse was involved in the subsequent naval operations until she sank in a Russian minefield off Port Arthur on 15 May 1904 after the ship struck two mines. The ship struck one mine which caused significant damage. Less than two hours later, the ship struck a second mine which detonated one of her magazines and Hatsuse sank almost immediately afterwards with the loss of over half her crew.

Japanese battleship <i>Shikishima</i> Japanese lead ship of Shikishima-class

Shikishima (敷島) was the lead ship of her class of two pre-dreadnought battleships built for the Imperial Japanese Navy by British shipyards in the late 1890s. During the Russo-Japanese War of 1904–1905, the ship fought in the Battles of Port Arthur, the Yellow Sea and Tsushima and was lightly damaged in the latter action, although shells prematurely exploded in her main guns in the latter two engagements. Shikishima remained in home waters during World War I. She was reclassified as a coastal defence ship in 1921 and served as a training ship for the rest of her career. The ship was disarmed and hulked in 1923 and finally broken up for scrap in 1948.

<span class="mw-page-title-main">BL 14-inch Mk VII naval gun</span> Naval gun

The BL 14-inch Mk VII naval gun was a breech loading (BL) gun designed for the battleships of the Royal Navy in the late 1930s. This gun armed the King George V-class battleships during the Second World War.

<span class="mw-page-title-main">QF 4.7-inch Mk I–IV naval gun</span> Naval gun

The QF 4.7-inch gun Mks I, II, III, and IV were a family of British quick-firing 4.724-inch (120 mm) naval and coast defence guns of the late 1880s and 1890s that served with the navies of various countries. They were also mounted on various wheeled carriages to provide the British Army with a long-range gun. They all had a barrel of 40 calibres length.

<span class="mw-page-title-main">QF 6-inch naval gun</span> Naval gun

The QF 6-inch 40 calibre naval gun (Quick-Firing) was used by many United Kingdom-built warships around the end of the 19th century and the start of the 20th century. In British service it was known as the QF 6-inch Mk I, II, III guns. As the 15 cm/40 (6") 41st Year Type naval gun it was used for pre-dreadnought battleships, armoured cruisers and protected cruisers of the early Imperial Japanese Navy built in UK and European shipyards. It was also the heaviest gun ever carried by a pre-Cold War destroyer.

<span class="mw-page-title-main">QF 12-pounder 12 cwt naval gun</span> British 3 inch calibre naval gun

The QF 12-pounder 12-cwt gun (Quick-Firing) was a common, versatile 3-inch (76.2 mm) calibre naval gun introduced in 1894 and used until the middle of the 20th century. It was produced by Armstrong Whitworth, Elswick and used on Royal Navy warships, exported to allied countries, and used for land service. In British service "12-pounder" was the rounded value of the projectile weight, and "12 cwt (hundredweight)" was the weight of the barrel and breech, to differentiate it from other "12-pounder" guns.

<span class="mw-page-title-main">QF 3-pounder Hotchkiss</span> Light 47 mm naval gun introduced in 1886

The QF 3-pounder Hotchkiss or in French use Canon Hotchkiss à tir rapide de 47 mm were a family of long-lived light 47 mm naval guns introduced in 1886 to defend against new, small and fast vessels such as torpedo boats and later submarines. There were many variants produced, often under license which ranged in length from 32 to 50 calibers but 40 caliber was the most common version. They were widely used by the navies of a number of nations and often used by both sides in a conflict. They were also used ashore as coastal defense guns and later as an anti-aircraft gun, whether on improvised or specialized HA/LA mounts.

<i>Shikishima</i>-class battleship Japanese battleship class

The Shikishima class was a two-ship class of pre-dreadnought battleships built for the Imperial Japanese Navy in the late 1890s. As Japan lacked the industrial capacity to build such warships itself, they were designed and built in the UK. The ships participated in the Russo-Japanese War of 1904–1905, including the Battle of Port Arthur on the second day of the war. Hatsuse sank after striking two mines off Port Arthur in May 1904. Shikishima fought in the Battles of the Yellow Sea and Tsushima and was lightly damaged in the latter action, although shells prematurely exploded in the barrels of her main guns in each battle. The ship was reclassified as a coast defence ship in 1921 and served as a training ship for the rest of her career. She was disarmed and hulked in 1923 and finally broken up for scrap in 1948.

<span class="mw-page-title-main">Vickers 10-inch 45-calibre naval gun</span> Weapon

The Vickers 10 inch naval gun was used on battleships and armoured cruisers built during the first decade of the 20th century. They were used as the Type 41 10-inch /45-caliber aboard the British-built semi-dreadnought Katori-class battleships and the natively-built Satsuma-class battleships of the Imperial Japanese Navy.

<span class="mw-page-title-main">BL 12-inch Mk X naval gun</span> Naval gun

The BL 12 inch Gun Mark X was a British 45-calibre naval gun which was mounted as primary armament on battleships and battlecruisers from 1906. It first appeared on HMS Dreadnought.

<span class="mw-page-title-main">BL 6-inch Mk XII naval gun</span> Naval gun

The BL 6-inch Mark XII naval gun was a British 45 calibre naval gun which was mounted as primary armament on light cruisers and secondary armament on dreadnought battleships commissioned in the period 1914–1926, and remained in service on many warships until the end of World War II.

<span class="mw-page-title-main">EOC 14-inch 45-calibre naval gun</span> Naval gun

The BL 14 inch 45 calibre gun were various similar naval guns designed and manufactured by Elswick Ordnance Company to equip ships that Armstrong-Whitworth built and/or armed for several countries before World War I.

<span class="mw-page-title-main">EOC 12-inch 45-calibre naval gun</span> Naval gun

The EOC 12 inch 45 calibre gun were various similar 12-inch wire-wound naval guns designed and manufactured by Elswick Ordnance Company to equip ships that the parent company Armstrong Whitworth built and/or armed for several countries before World War I.

<span class="mw-page-title-main">EOC 10-inch 45-calibre naval gun</span> Naval gun

The EOC 10-inch 45 calibre gun were various similar 10-inch naval guns designed and manufactured by Elswick Ordnance Company to equip ships they built and/or armed for several countries before World War I.

<span class="mw-page-title-main">Vickers 14-inch/45 naval gun</span> Naval gun

The Vickers 14-inch 45-calibre gun was designed and built by Vickers and initially installed on the battlecruiser Kongō which it was building for the Imperial Japanese Navy. Guns similar to this Vickers design were also later built in Japan to arm Kongō's sister ships and subsequent Japanese-constructed "super-dreadnoughts" which were all built in Japan. Japanese-built versions of the guns were designated 14-inch 41st Year Type, and from 1917 when the Navy went metric they were redesignated 36 cm 41st Year Type.

<span class="mw-page-title-main">8 cm/40 3rd Year Type naval gun</span> Naval gun

The Type 41 3-inch (76 mm) naval gun otherwise known as the 8 cm/40 3rd Year Type naval gun was a Japanese dual-purpose gun introduced before World War I. Although designated as 8 cm (3.15 in), its shells were 76.2 mm (3 in) in diameter.

<span class="mw-page-title-main">EOC 8 inch 45 caliber</span> Naval gun

The EOC 8 inch 45 caliber were a family of related 8-inch (203 mm) 45 caliber naval guns designed by the Elswick Ordnance Company and manufactured by Armstrong for export customers before World War I. In addition to being produced in the United Kingdom licensed variants were produced in Italy and in Japan. Users of this family of gun included the navies of Argentina, Chile, China, Italy, Japan and Spain. This family of guns saw action in the Spanish–American War, Boxer Rebellion, Russo-Japanese War, Italo-Turkish War, World War I and World War II. In addition to its naval role it was later used as coastal artillery and siege artillery after the ships it served on were decommissioned.

The 15 cm/45 41st Year Type was a British naval gun designed by the Elswick Ordnance Company for export in the years before World War I that armed warships of the Imperial Japanese Navy. These guns served aboard Japanese ships during World War I and as coastal artillery during World War II.

References

  1. 2,481-foot-per-second (756 m/s), 850-pound (390 kg) projectile, with 211 lb (96 kg) cordite Mk I size 50 & 3¾. Text Book of Gunnery, 1902.
  2. Corbett, Julian Stafford (1994). Maritime Operations in the Russo-Japanese War 1904–05. Naval Institute Press. pp. 391–392. ISBN   1-55750-129-7.

Bibliography

Further reading