- Demonstration of towing on 2-wheeled travelling platform
- Demonstration of deployment for action on cruciform travelling platform with wheels removed
- Mk I gun on Mk IV mounting on Peerless 4 ton lorry, WWI
- On HMAS Australia, December 1918
QF 3 inch 20 cwt anti-aircraft gun | |
---|---|
Type | Anti-aircraft gun |
Place of origin | United Kingdom |
Service history | |
In service | 1914–1947 [1] |
Used by | United Kingdom Australia Canada Finland Ireland |
Wars | World War I World War II |
Production history | |
Designer | Vickers |
Variants | Mk I, Mk I*, Mk IB, Mk 1C, Mk 1C*, Mk IE, Mk SIE, Mk II, Mk III, Mk IV, Mk IVA [2] |
Specifications | |
Mass | 2,240 lb (1,020 kg), gun and breech 5.99 tons, [3] with 2-wheel platform |
Barrel length | Bore: 11 ft 4 in (3.45 m) (45 cal) Total: 11 ft 9 in (3.58 m) [3] |
Crew | 11 [4] |
Shell | Fixed QF HE 76.2 × 420 mm R [5] [6] |
Shell weight | 12.5 lb (5.7 kg), 1914; 16 lb (7.3 kg), 1916 |
Calibre | 3 inches (76 mm) |
Breech | Semi-automatic sliding-block [7] |
Recoil | 11 inches (280 mm). hydro spring, constant [3] |
Carriage | High-angle wheeled, static, or lorry mounting |
Elevation | −10 – 90° [3] |
Traverse | 360° |
Rate of fire | 16–18 rpm [8] |
Muzzle velocity | 2,500 ft/s (760 m/s), 12.5 lb (5.7 kg) shell 2,000 ft/s (610 m/s), 16 lb (7.3 kg) shell [9] |
Effective firing range | 16,000 ft (4,900 m) [8] |
Maximum firing range | 23,500 ft (7,200 m), 12.5 lb shell [3] 22,000 ft (6,700 m), 16 lb shell [8] |
The QF 3-inch 20 cwt anti-aircraft gun became the standard anti-aircraft gun used in the home defence of the United Kingdom against German Zeppelins airships and bombers and on the Western Front in World War I. It was also common on British warships in World War I and submarines in World War II. 20 cwt referred to the weight of the barrel and breech, to differentiate it from other 3-inch guns (1 cwt = 1 hundredweight = 112 lb, 51 kg, hence the barrel and breech together weighed 2,240 lb, 1,020 kg). While other AA guns also had a bore of 3 inches (76 mm), the term 3-inch was only ever used to identify this gun in the World War I era, and hence this is what writers are usually referring to by 3-inch AA gun.
The gun was based on a prewar Vickers naval 3-inch (76 mm) QF gun with modifications specified by the War Office in 1914. These (Mk I) included the introduction of a vertical sliding breech-block to allow semi-automatic operation. When the gun recoiled and ran forward after firing, the motion also opened the breech, ejected the empty cartridge case and held the breech open ready to reload, with the striker cocked. When the gunner loaded the next round, the block closed and the gun fired. [7]
The early 12.5-pound (5.7 kg) shrapnel shell at 2,500 ft/s (760 m/s) caused excessive barrel wear and was unstable in flight. The 1916 16-pound (7.3 kg) shell at 2,000 ft/s (610 m/s) proved ballistically superior and was better suited to a high explosive filling. [8]
The Mark I* had different rifling. The Mark II lost the semi-automatic action. The Mk III of 1916 reverted to a 2-motion screw breech to suit available manufacturing capability, and Mk IV had a single-tube barrel and single-motion screw breech; [1] a Welin breech block with an Asbury breech. [10]
A US Army report on anti-aircraft guns of April 1917 reported that this gun's semi-automatic loading system was discontinued because of difficulties of operation at higher angles of elevation, and replaced by "the standard Vickers-type straight-pull breech mechanism", reducing rate of fire from 22 to 20 rds/minute. [11] Routledge quotes a rate of fire of 16–18 rounds per minute, in the context of the 16-pounder shell of 1916. [8] This would appear to be the effective rate of fire found to be sustainable in action.
Beginning in 1930, a new towed 4-wheeled sprung trailer platform on pneumatic tyres was introduced to replace the obsolete lorries and two-wheeled carriages still used as mounts from World War I, barrels were equipped with loose liners, and the guns were connected to the new Vickers No. 1 Predictor. [12] [13] Eight more Mks followed between the World Wars. [1] By 1934 the rocking-bar deflection sights had been replaced by Magslip receiver dials which received input from the Predictor, with the layers matching pointers instead of tracking the target. [14] Predictor No. 1 was supplemented from 1937 by Predictor No. 2, based on a US Sperry AAA Computer M3A3. This was faster and could track targets at 400 mph (640 km/h) at heights of 25,000 ft (7,600 m), both Predictors received height data, generally from the Barr & Stroud UB 7 (9-foot base) instrument. [15]
The 3-inch 20 cwt gun was superseded by the QF 3.7-inch (94 mm) AA gun from 1938 onwards, but numbers of various Marks remained in service throughout World War II. In Naval use it was being replaced in the 1920s by the QF 4-inch (100 mm) Mk V on HA (high-angle) mounting.
Britain entered World War I with no anti-aircraft artillery. When war broke out and Germany occupied Belgium and North-east France, it was realised that key installations in England could be attacked by air. As a result, a search for suitable anti-aircraft guns began. The Navy provided the initial 3-inch (76 mm) guns from its warships, approximately 18 by December 1914, for the defence of key installations in Britain, manned by RNVR crews, until the new specialised anti-aircraft version began production and entered service. [16] It was from then onwards operated by Royal Garrison Artillery crews, with drivers and crew for motor lorries provided by the Army Service Corps. However, the Mobile Anti-Aircraft Brigade based at Kenwood Barracks in London, continued to be manned by the RNVR, although under the operational control of the Army. [17]
Other earlier anti-aircraft guns based on the existing 13-pounder and 18-pounder guns proved inadequate, apart from the QF 13-pounder 9 cwt but even that could not reach high altitudes and fired a fairly light shell. The 3-inch 20 cwt with its powerful and stable in flight, [18] 16 lb (7.3 kg) shell and fairly high altitude was well suited to defending the United Kingdom against high-altitude Zeppelins and bombers. The 16-pound shell took 9.2 seconds to reach 5,000 ft (1,500 m) at 25 degrees from horizontal, 13.7 seconds to reach 10,000 ft (3,000 m) at 40 degrees, 18.8 seconds to reach 15,000 ft (4,600 m) at 55 degrees. [9] This means that the gun team had to calculate where the target would be 9 to 18 seconds ahead, determine the deflection and set the correct fuze length, load, aim and fire accordingly. Deflection was calculated mechanically and graphically using an optical height & rangefinder to provide data for the two piece Wilson-Dalby 'predictor', with the fuze length read off a scale mounted on the gun.
British time fuzes, required for airburst shooting, were powder burning (igniferous). However, the powder burning rate changed as air pressure reduced, making them erratic for the new vertical shooting. Modified fuzes reduced the variability but did not cure the problem. Britain lagged behind Germany in developing clockwork time fuzes. In addition, experience showed that the percussion mechanism in time fuzes, which burst the shrapnel shell on impact if the timer failed, had to be removed because AA shells could land among friendly troops and nearby civilians. [19] Igniferous fuzes had to have a gaine in order to detonate HE shells.
The carriage's short recoil of 11 inches (280 mm) allowed a higher rate of fire than for AA guns based on long-recoil field guns such as the QF 13-pounder 9 cwt. [20]
By June 1916, 202 3-inch 20 cwt were deployed in the air defence of Britain, of a total of 371 AA guns. [4]
The first guns arrived on the Western Front in November 1916 and by the end of 1916 it equipped 10 sections out of a total of 91. [21] An AA section consisted of two guns and became the standard organizational unit.
By the end of World War I, 257 (out of a total of 402 AA guns) were in land service in England on static and lorry mountings, and 102 (out of a total of 348) were in service on the Western Front [22] mounted on heavy lorries, typically the Peerless 4 Ton. In addition, many were mounted on Royal Navy ships.
Gun | muzzle velocity | Shell weight | Time to 5,000 feet (1,500 m) at 25° (seconds) | Time to 10,000 feet (3,000 m) at 40° (seconds) | Time to 15,000 feet (4,600 m) at 55° (seconds) | Max. height [24] |
---|---|---|---|---|---|---|
QF 13 pdr 9 cwt | 1,990 feet per second (610 m/s) | 12.5 pounds (5.7 kg) | 10.1 | 15.5 | 22.1 | 19,000 feet (5,800 m) |
QF 12 pdr 12 cwt | 2,200 feet per second (670 m/s) | 12.5 pounds (5.7 kg) | 9.1 | 14.1 | 19.1 | 20,000 feet (6,100 m) |
QF 3-inch 20 cwt 1914 | 2,500 feet per second (760 m/s) | 12.5 pounds (5.7 kg) | 8.3 | 12.6 | 16.3 | 23,500 feet (7,200 m) |
QF 3-inch 20 cwt 1916 | 2,000 feet per second (610 m/s) | 16 pounds (7.3 kg) | 9.2 | 13.7 | 18.8 | 22,000 feet (6,700 m) [25] |
QF 4-inch Mk V naval gun | 2,350 feet per second (720 m/s) | 31 pounds (14 kg) | 4.4?? | 9.6 | 12.3 | 28,750 feet (8,760 m) |
At the beginning of World War II in 1939, Britain possessed approximately 500 of these guns. Over the 1930s, they had been gradually modernized, and a limited production line was set up at the Commonwealth Ordnance Factory Maribyrnong, Australia. [26] Initially most were in the heavy anti-aircraft (HAA) role until replaced by the new QF 3.7-inch (94 mm) gun. Some were deployed as light anti-aircraft guns (LAA) for airfield defence, being transferred to the RAF Regiment when this was formed in 1942, until more 40 mm Bofors guns arrived [27] However, it was discovered at mobilization that the 233 guns in HAA reserve were missing various parts and predicted fire instruments. [28] One hundred and twenty were in France with the British Expeditionary Force in November 1939, compared with 48 of the modern QF 3.7-inch AA gun. [29]
In 1941, 100 of the obsolete guns were converted to become the 3-inch 16 cwt anti-tank gun, firing a 12.5-pound (5.7 kg) armour-piercing shell. [30] They appear to have been mainly deployed in home defence. Some were mounted to Churchill tanks to become the "Gun Carrier, 3-inch, Mk I, Churchill (A22D)".
In World War II the gun was carried by S-class, U-class and V-class submarines.
It was also fitted to older destroyers, A-class to I class during refits in 1940, replacing a set of torpedo tubes, to increase their AA capabilities. Some smaller warships used this gun as well. In 1939 it was estimated the RN had 553 Mk I, 184 Mk II, 27 Mk III and 111 Mk IV guns in service. [2]
Britain supplied 24 Mk 3 guns and 7 M/34 mechanical fire control computers to Finland during the Winter War of 30 November 1939 to March 1940 but they arrived too late to be used. They were used during the Continuation War of 1941–1944. [31]
Mk I 12.5 lb (5.7 kg) shrapnel round 1914 | Mk I 12.5 lb (5.7 kg) shrapnel shell 1914 | No. 84 Time & Percussion Fuze for shrapnel shells | No. 80/44 Time Fuze with No. 2 Gaine (left) and 44/80 Gaine (right) for high-explosive shells |
The QF 4.5 inch gun has been the standard medium-calibre naval gun used by the Royal Navy as a medium-range weapon capable of use against surface, aircraft and shore targets since 1938. This article covers the early 45-calibre family of guns up to the 1970s. For the later unrelated 55-calibre Royal Navy gun, see 4.5 inch Mark 8 naval gun. Like all British nominally 4.5 inch naval guns, the QF Mk I has an actual calibre of 4.45 inches (113 mm).
The Ordnance QF 18-pounder, or simply 18-pounder gun, was the standard British Empire field gun of the First World War-era. It formed the backbone of the Royal Field Artillery during the war, and was produced in large numbers. It was used by British Forces in all the main theatres, and by British troops in Russia in 1919. Its calibre (84 mm) and shell weight were greater than those of the equivalent field guns in French (75 mm) and German (77 mm) service. It was generally horse drawn until mechanisation in the 1930s.
The QF 3.7-inch AA was Britain's primary heavy anti-aircraft gun during World War II. It was roughly the equivalent of the German Flak 8.8 cm and American 90 mm, but with a slightly larger calibre of 3.7 inches, approximately 94 mm. Production began in 1937 and it was used throughout World War II in all theatres except the Eastern Front. It remained in use after the war until AA guns were replaced by guided missiles beginning in 1957.
This article explains terms used for the British Armed Forces' ordnance (weapons) and ammunition. The terms may have different meanings depending on its usage in another country's military.
The Ordnance QF 13-pounder (quick-firing) field gun was the standard equipment of the British and Canadian Royal Horse Artillery at the outbreak of World War I.
The BL 8-inch howitzer Mark I through to Mark V were a British improvisation developed early in the First World War to provide heavy artillery. It used shortened and bored-out barrels from various redundant naval 6-inch guns.
The 13 pounder 9 cwt anti-aircraft gun became the standard mobile British anti-aircraft gun of the World War I era, especially in theatres outside Britain.
The BL 6-inch gun Mark VII was a British naval gun dating from 1899, which was mounted on a heavy travelling carriage in 1915 for British Army service to become one of the main heavy field guns in the First World War, and also served as one of the main coast defence guns throughout the British Empire until the 1950s.
The QF 4.7-inch Gun Mks I, II, III, and IV were a family of British quick-firing 4.724-inch (120 mm) naval and coast defence guns of the late 1880s and 1890s that served with the navies of various countries. They were also mounted on various wheeled carriages to provide the British Army with a long range gun. They all had a barrel of 40 calibres length.
The 12 pounder 12 cwt anti-aircraft gun was a British anti-aircraft gun of the First World War, The guns were QF 12 pounder 12 cwt naval guns taken from coast defence positions with the addition of a modified cradle for higher elevation, a retaining catch for the cartridge, and an additional spring recuperator above the barrel and high-angle sights. Writers commonly refer to it simply as "12 pounder anti-aircraft gun". 12 cwt referred to the weight of the barrel and breech - 1,344 lb (610 kg) - to differentiate it from other 12-pounder guns.
The Ordnance BL 15-pounder, otherwise known as the 15-pounder 7 cwt, was the British Army's field gun in the Second Boer War and some remained in limited use in minor theatres of World War I. It fired a shell of 3-inch diameter with a maximum weight of 15 pounds (6.8 kg), hence its name which differentiated it from its predecessor '12-pounder' 3-inch gun which fired shells weighing only 12.5 pounds (5.7 kg).
The Ordnance QF 13 pounder Mk III anti-aircraft gun, also known as 13 pounder 6 cwt, was an early British improvisation in World War I to adapt the QF 13-pounder field gun to anti-aircraft use. 6 cwt referred to the weight of barrel and breech to differentiate it from other "13 pounder" guns.
The Ordnance QF 13-pounder Mk IV anti-aircraft gun was an Elswick Ordnance commercial 3 inch 13-pounder gun of which 6 were supplied during World War I. The Ordance QF 13-pounder MK IV is unrelated to the other British Mks 13-pounder.
The Ordnance BL 12-pounder 6 cwt was a lighter version of the British 12-pounder 7 cwt gun, used by the Royal Horse Artillery in the late 19th and early 20th centuries.
The QF 12-pounder 12-cwt gun (Quick-Firing) was a common, versatile 3-inch (76.2 mm) calibre naval gun introduced in 1894 and used until the middle of the 20th century. It was produced by Armstrong Whitworth, Elswick and used on Royal Navy warships, exported to allied countries, and used for land service. In British service "12-pounder" was the rounded value of the projectile weight, and "12 cwt (hundredweight)" was the weight of the barrel and breech, to differentiate it from other "12-pounder" guns.
The QF 12 pounder 18 cwt gun (Quick-Firing) was a 3-inch high-velocity naval gun used to equip larger British warships such as battleships for defence against torpedo boats. 18 cwt referred to the weight of gun and breech, to differentiate the gun from others that also fired the "12 pound" shell.
The QF 4 inch Mk V gun was a Royal Navy gun of World War I which was adapted on HA mountings to the heavy anti-aircraft role both at sea and on land, and was also used as a coast defence gun.
The QF 1 pounder, universally known as the pom-pom due to the sound of its discharge, was a 37 mm British autocannon, the first of its type in the world. It was used by several countries initially as an infantry gun and later as a light anti-aircraft gun.
The QF 5.25-inch Mark I gun was the heaviest dual-purpose gun used by the Royal Navy during the Second World War. Although considered less than completely successful, it saw extensive service. 267 guns were built.
The QF 4-inch gun Mks I, II, III were early British QF (quick-firing) naval guns originating in 1895. They all had barrels of 40 calibres length.