BL 9.2-inch howitzer | |
---|---|
Type | Heavy siege howitzer |
Place of origin | United Kingdom of Great Britain and Ireland |
Service history | |
In service | 1914–1919 |
Used by | United Kingdom Australia Canada United States Belgium Russian Empire [1] |
Wars | World War I |
Production history | |
Designer | Mk I: Coventry Ordnance Works Mk II: Vickers |
Designed | 1913 |
Manufacturer | Vickers, Bethlehem Steel |
Produced | 1914–1918 |
No. built | All Mks equivalent to 632 complete equipments plus 43 ordnances [2] (UK contracts) |
Variants | Mk I, Mk II |
Specifications | |
Mass | Mk II Body, cradle & ordnance only 5 tons 17 cwt [3] |
Barrel length | 10 ft 1 in (3 m) (Mk I) 13 ft 3 in (4 m) (Mk II) [3] |
Shell | HE 290 lb (130 kg) |
Caliber | 9.2-inch (233.7 mm) |
Breech | Welin breech block with Smith-Asbury mechanism |
Recoil | Variable Hydro-pneumatic 23-40 inches (MK I) 20-44 inches (MK II) |
Carriage | Siege carriage |
Elevation | 15°–55° (Mk I) 15°–50° (Mk II) [4] |
Traverse | 30° L & R |
Muzzle velocity | 1,187 ft/s (362 m/s) (Mk I) 1,600 ft/s (490 m/s) (Mk II) [5] |
Maximum firing range | 10,060 yd (9,200 m) (Mk. I) 13,935 yd (12,742 m) (Mk. II) [4] |
The Ordnance BL 9.2-inch howitzer was a heavy siege howitzer that formed the principal counter-battery equipment of British forces in France in World War I. It equipped a substantial number of siege batteries of the Royal Garrison Artillery. During World War II a limited number were used in the Battle of France, with the remainder being kept in the United Kingdom.
The origins of a British heavy "siege" howitzer lie in advances in technology and the 21 cm howitzers used by the German field army. [6] UK had purchased Skoda 9.45-inch howitzers from Austria in 1900 for service in South Africa. A practice camp in the 1900s showed this howitzer's high minimum elevation was a major problem. In due course Britain decided to develop its own heavy weapon, but retained the Skoda transport technique of moving it in three loads on wheeled trailers (either horse- or tractor-towed). A trial gun was received in 1913 and fired at Woolwich and Shoeburyness during the winter. In July 1914 it was sent to the tactical firing range at Rhayader with a siege company. The assessment was "This equipment is a vast improvement on any other in use in the siege artillery, and is worth taking with an army." Major General von Donop, Master-General of the Ordnance, immediately ordered 16 guns [7] and a further 16 were ordered in October 1914. The prototype gun, "Mother", was in action in France on 31 October 1914 and production guns entered service in 1915. [2]
The gun was transported in three loads – body and cradle, bed, barrel – towed by either heavy horses or a Holt tractor. The equipment featured a segment shaped ground platform assembled from steel section and bolted to a holdfast sunk flush with the ground. An earth box fitted above ground to the front of the holdfast, with 9 long tons (9,100 kg) (Mk 1) or 11 long tons (11,200 kg) (Mk 2) of earth prevented it "bucking". On soft ground, extra beams were used under the holdfast. [3] The carriage was mounted on the platform, it was pivoted at the front and traversed up to 30 degrees left and right by a spur gear engaging a curved toothed rack at the breech end of the platform, with the weight of the carriage on rollers.
The tubular cradle pivoted by the trunnions supported the barrel – a wire bound A tube – and connected it to the hydro-pneumatic recoil system with a floating piston (the first British use of this) [8] and hydraulic buffer. However, the initial design suffered from excessive recoil and was modified in 1916. In 1917 the recoil was further improved by addition of a recoil indicator and cut-off gear. [9] Full recoil (40-inch Mk I, 44-inch Mk II [10] ) was allowed at lower elevation, hence absorbing most of the horizontal (i.e. backward) force. A shorter recoil (23-inch Mk I, 20-inch Mk II [11] ) was allowed at high elevation where the ground itself could absorb much of the vertical (i.e. downward) recoil force. This prevented the breech from hitting the platform. The barrel had to be depressed 3° for loading, as can be seen in the photograph, shown below, of a howitzer of the Australian 55th Siege Battery.[ citation needed ]
The Mk I's range was relatively limited and in June 1916 the senior Artillery commander in France, Major General Birch, [nb 1] requested among other artillery improvements an increase in range to 15,000 yards (14,000 m)"even if an increase of the weight of the equipment is entailed". [12] This resulted in the Mark II gun in December 1916, with a heavier maximum propellant charge, a longer barrel and an increased range of 13,935 yards (12,742 m). However, combat experience showed the higher-velocity Mk II barrel had a reduced life, estimated at 3,500 rounds. [13] The average barrel life of a Mk I gun was estimated from combat experience to be 6,000 rounds. [9]
A disadvantage of the dismantling system was an inability to fire directly from the travelling carriage the way the BL 8-inch howitzer could. Thirty-six hours were normally required to dismount a gun from its travelling configuration and set it up for firing. [14] This disadvantage was offset by the stability of the siege mounting which made it "the most accurate of heavy howitzers". [15]
In World War I British service, the gun served only on the Western Front with 36 British, one Australian and two Canadian batteries. Batteries increased in size from four guns to six during 1916–17. Initially, batteries were in Heavy Artillery Groups – usually a single battery of 9.2-inch with the other four batteries being differently equipped. Mid-war Groups were renamed Brigades RGA, and there were different types but the pattern of a single 9.2-inch battery in a brigade was retained.[ citation needed ]
During World War II, some guns went to France with the British Expeditionary Force, but their main deployment was in the United Kingdom as anti-invasion defences. According to the post-war memoirs of comedian Spike Milligan, who served in the Royal Artillery's 56th Heavy Regiment, 9.2-inch howitzer ammunition was so scarce in the early years of the Second World War that gun-crews in training were reduced to shouting "bang" in unison, as no shells were available to practice with. [16] [nb 2]
Bethlehem Steel was already contracted to manufacture 9.2-inch howitzers for Britain before the US entry into World War I in April 1917. The order was to be completed by July 1917, but they failed to meet the contract timescale and a year later deliveries had not been completed. [1] As British manufacturing capacity increased, guns became available for export. The US government ordered 100 from Bethlehem and 132 from Britain to equip the American Expeditionary Forces building up in France. One source states that Bethlehem did not reach production on the US order but that 40 were delivered from Britain by the end of the war. [17]
The US Ordnance manual of 1920 describes its current stock of Model of 1917 (Vickers Mk I) and Model of 1918 (Vickers Mk II) as being built both in Britain and the USA. [18] The US-built guns may have been British orders to Bethlehem which were redirected to the US Army. [19]
One source describes the US acquisition of the 9.2 as based mainly on the need at the time to utilize immediately available manufacturing capacities, and that development of a 240-mm howitzer based on the French Schneider 280-mm mortar for its super-heavy artillery was the main US goal. [17] This view is supported by the 1920 US Ordnance manual which describes the 240 mm howitzer as far superior to the 9.2. [20]
The US 65th Artillery Regiment, Coast Artillery Corps (CAC), was in action with 9.2-inch howitzers in World War I. Also equipped with or slated for this weapon, the 72nd Artillery (CAC) was almost ready for the front and the 50th Artillery (CAC) was in France but had not commenced training at the time of the Armistice. [21] Each regiment had an authorised strength of 24 guns. [22]
Following the war, the US stock of 9.2-inch weapons was moved to the US and placed in reserve; a total of 45 guns. In April 1919, 40 of them were placed at coast defence installations for gun loading training. In 1923, these guns, plus the five others and 45,000 shells, were withdrawn to war reserve storage. In 1926 the 9.2 was listed for disposal. Five gun tubes survive in the United States as war memorials. [19]
Only four out of 44 9.2-inch howitzers promised by the allies ended up in the service of the Russian Empire. These four pieces were actually given by Japan in 1917. The Russian designation for the gun was 234-mm Vickers howitzer. An ammunition tally on 15 September 1917 showed 1,110 rounds per gun available in the Russian arsenal. There was however no local production of this ammunition, all had to be imported. [23]
Three of the guns were still in service with the Soviet 317th artillery battalion, part of the 13th Army in the winter of 1939-1940, when they were employed against the Mannerheim Line. [24]
The primary ammunition was HE (high explosive) shells filled with Amatol, Trotyl (TNT) or Lyddite. The standard shell weight was 290 pounds (130 kg). However, there were 19 variants of HE shell, some with sub-variants. Later marks of shell had a fill that varied between about 25 and 40 pounds (11 and 18 kg) of HE, and shell bodies varying in length between 28 and 32 inches (71 and 81 cm). There was also some use of Common Pointed shell filled with Shellite. Later fuses included various versions of No 101, 106 and 188. [3] More than three million rounds of ammunition were expended during the war. [14]
Chemical shells were introduced in 1918, these were filled with mustard gas, a persistent chemical agent. However, only 7000 shells were produced. [25]
The barrel of the original prototype, known as 'Mother' is preserved on a Mk I carriage by the Imperial War Museum. This howitzer was tested at Rhayader in Powys, Wales in July 1914. Sent to France, it was operated by 8th Siege Battery from October 1914. The howitzer was visited by Field Marshal Sir John French on 5 November 1914 and by the Prince of Wales on 18 November. Transferred to 10th Siege Battery in early 1915 it saw use during the battles of Neuve Chapelle in March 1915 and Festubert in May 1915. The weapon returned to Britain in July 1915 and was fired at the Shoeburyness ranges until worn out. With its barrel relined, it was reissued to France in 1917. [14]
Acquired by the Imperial War Museum, the howitzer was exhibited at Crystal Palace, [26] from 1920 and at South Kensington from 1924. [27] Around this time, the howitzer served as the model for the Royal Artillery Memorial designed by Charles Sargeant Jagger. [28]
A Mk I howitzer, probably used by 55th Siege Battery of the First Australian Imperial Force in 1917, is preserved at the Australian War Memorial (AWM) in Canberra. The weapon was received by the AWM in 1939, later being used at an artillery range at Port Wakefield, South Australia for proof testing before returning to the AWM's stores in April 1949. It was later loaned to the Royal Australian Artillery for display at Holsworthy Barracks, returning to the AWM in 1998. [29]
A 9.2-inch howitzer barrel, manufactured in 1918 by the Bethlehem Steel Company, is displayed in White Point Garden at The Battery in Charleston, South Carolina (32.76983, -79.93179). [30]
The Ordnance QF 18-pounder, or simply 18-pounder gun, was the standard British Empire field gun of the First World War-era. It formed the backbone of the Royal Field Artillery during the war, and was produced in large numbers. It was used by British Forces in all the main theatres, and by British troops in Russia in 1919. Its calibre (84 mm) and shell weight were greater than those of the equivalent field guns in French (75 mm) and German (77 mm) service. It was generally horse drawn until mechanisation in the 1930s.
The Ordnance BL 2.75-inch mountain gun was a screw gun designed for and used by the Indian Mountain Artillery into World War I.
The Ordnance BL 60-pounder was a British 5 inch (127 mm) heavy field gun designed in 1903–05 to provide a new capability that had been partially met by the interim QF 4.7 inch Gun. It was designed for both horse draft and mechanical traction and served throughout the First World War in the main theatres. It remained in service with British and Commonwealth forces in the inter-war period and in frontline service with British and South African batteries until 1942 being superseded by the BL 4.5 inch Medium Gun.
The BL 5.5-inch gun was a British artillery gun introduced during the middle of the Second World War to equip medium batteries.
Ordnance, QF 3.7-inch howitzer is a mountain gun, used by British and Commonwealth armies in the First and Second World Wars, and between the wars.
The BL 8-inch howitzer Marks VI, VII and VIII were a series of British artillery siege howitzers on mobile carriages of a new design introduced in World War I. They were designed by Vickers in Britain and produced by all four British artillery manufacturers but mainly by Armstrong and one American company. They were the equivalents of the German 21 cm Morser 16 and in British service were used similarly to the BL 9.2-inch howitzer but were quicker to manufacture and more mobile. They delivered a 200 lb (91 kg) shell to 12,300 yd. They had limited service in the British Army in World War II before being converted to the new 7.2 in (180 mm) calibre. They also equipped a small number of Australian and Canadian batteries in World War I and by the US Army in that war. They were used in small numbers by other European armies.
The Ordnance BL 6 inch 26cwt howitzer was a British howitzer used during World War I and World War II. The qualifier "26cwt" refers to the weight of the barrel and breech together which weighed 26 long hundredweight (1.3 t).
The Ordnance QF 13-pounder (quick-firing) field gun was the standard equipment of the British and Canadian Royal Horse Artillery at the outbreak of World War I.
The Ordnance QF 4.5-inch howitzer was the standard British Empire field howitzer of the First World War era. It replaced the BL 5-inch howitzer and equipped some 25% of the field artillery. It entered service in 1910 and remained in service through the interwar period and was last used in the field by British forces in early 1942. It was generally horse drawn until mechanisation in the 1930s.
The BL 8-inch howitzer Mark I through to Mark V were a British improvisation developed early in the First World War to provide heavy artillery. It used shortened and bored-out barrels from various redundant naval 6-inch guns.
The Ordnance BL 6 inch 30cwt howitzer was a British medium howitzer used in the Second Boer War and early in World War I. The qualifier "30cwt" refers to the weight of the barrel and breech together which weighed 30 hundredweight (cwt) : 30 × 112 lb = 3,360 lb. It can be identified by the slightly flared shape of the muzzle and large recuperator springs below the barrel.
The British Ordnance BL 12 inch howitzer on truck, railway, a type of railway gun, was developed following the success of the 9.2-inch siege howitzer. It was similar but unrelated to the 12-inch siege howitzers Mk II and IV.
The British Ordnance BL 12 inch gun Mk IX on truck, railway mounted surplus 12 inch Mk IX W naval guns, manufactured by Woolwich Arsenal in 1906, on various railway platforms to provide mobile long-range heavy artillery for the British Army on the Western Front in World War I.
The Ordnance BL 12-inch howitzer was a scaled-up version of the successful BL 9.2-inch siege howitzer.
The British BL 6-inch gun Mk XIX was introduced in 1916 as a lighter and longer-range field gun replacement for the obsolescent BL 6-inch gun Mk VII.
The Ordnance BL 15-pounder, otherwise known as the 15-pounder 7 cwt, was the British Army's field gun in the Second Boer War and some remained in limited use in minor theatres of World War I. It fired a shell of 3-inch diameter with a maximum weight of 15 pounds (6.8 kg), hence its name which differentiated it from its predecessor '12-pounder' 3-inch gun which fired shells weighing only 12.5 pounds (5.7 kg).
Ordnance BL 14-inch gun on truck, railway were 2 British 14-inch Mk III naval guns mounted on railway carriages, used on the Western Front in 1918. The guns had a very brief service life and were scrapped in 1926, but their railway carriages were re-used for mounting guns in World War II.
The BL 9.2-inch Mk IX and Mk X guns were British breech loading 9.2-inch (234 mm) guns of 46.7 calibre, in service from 1899 to the 1950s as naval and coast defence guns. They had possibly the longest, most varied and successful service history of any British heavy ordnance.
The BL 6-inch gun Marks II, III, IV and VI were the second and subsequent generations of British 6-inch rifled breechloading naval guns, designed by the Royal Gun Factory in the 1880s following the first 6-inch breechloader, the relatively unsuccessful BL 6-inch 80-pounder gun designed by Elswick Ordnance. They were originally designed to use the old gunpowder propellants but from the mid-1890s onwards were adapted to use the new cordite propellant. They were superseded on new warships by the QF 6-inch gun from 1891.
The BL 18-inch railway howitzer was a British railway gun developed during World War I. Part of the progression of ever-larger howitzers on the Western Front, it did not enter service until 1920.