Bamboo bicycles are pedal-and-chain-driven, human-powered, single-track vehicles that have two wheels attached to a bamboo frame. Because of its light weight, vibration damping, and sustainability, bamboo is slowly starting to be used in bicycle frame production, though the industry is still dominated by aluminium frames.
Bamboo bikes were first patented in England by the Bamboo Cycle Company and introduced to the general public on 26 April 1894. [1] A US patent was applied for in 1895, by August Oberg and Andrew Gustafson, and granted in 1896. However, with the development of tougher industrial metals, such as steel and aluminium, large-scale usage of bamboo to build bicycles never happened. [2] [3]
Though bicycles are a staple of human transportation, in both rural and urban areas, bamboo bicycles are not widely used. With the advent of the Green movement, however, bamboo is being used again, primarily for expensive racing and touring bicycles. Bamboo bikes are entering the market as low cost alternatives to relatively expensive and unsustainable[ dubious – discuss ] aluminium and metal bikes. [4]
Several aspects of bamboo are extremely valuable to both cyclists and bicycle manufacturers: high strength-to-weight ratio, vibration control, and sustainable growth. Because of bamboo's tendency to grow straight, it does not exhibit "knots" and "turns" in its wood, unlike other types of wood. As a result, bamboo has a higher specific tensile strength than steel, as well as a higher specific compressive strength than concrete. [5] [6] This tendency also allows for excellent vibration control, which, in turn, provides for a smoother ride and increased stability on rough terrain.
The bamboo poles can be joined in a number of different ways. The earliest models used metal joints which were then tightened around the bamboo. Another approach is to wrap the joints with resin saturated fibers to make composite lugs around the bamboo frame members. For modernised track bicycles, carbon fibre, due to its light weight, is used for the remainder of the parts that are not made of bamboo - for example, the fork, because it is difficult to find a perfect piece of bamboo that fits into the fork socket of the frame. [7]
Bamboo could be used as an alternative to traditional steel and aluminium bikes in many rural areas because of its potential sustainability.
A Bamboo Bike Project started by engineers at Columbia University created a small number of bamboo bikes from 2007 to 2011. This was done with the intention of providing low cost bikes for Africans in rural areas, and stimulating local bike building industries, without major assistance from outside sources. [7]
The United Nations and the United States have invested in the Ghana Bamboo Bike Initiative, which was created by Bernice Dapaah. This business markets itself as addressing climate change, poverty, youth unemployment, rural-urban migration and by creating jobs for women. [4] As of 2015 over 1000 of these bikes had been sold in Ghana, Europe and the United States. [8]
As of 2016 few bicycles have also been made in Bangladesh. [9]
In 2014 a Dutch company started organizing tours in Vietnam held on locally-built bamboo bicycles. In 2015 the company expanded to Thailand and in 2018 also to Myanmar. The bikes the tourists ride are all created in Thailand by the employees of Dutch entrepreneur Axel Lukassen and his local business partners.
In 2013 two women rode self-built bamboo touring bikes from London, England to Sydney, Australia. They showcased the strength of bamboo bicycles and the ability to make custom built bikes without the professional skills and knowledge that would be required to make steel or aluminium bikes. These were also at a small fraction of the cost of traditional frames. [10]
The most expensive bamboo bikes cost thousands of dollars. Conversely, the bikes sold in Ghana for the Ghana Bamboo Bike Initiative have been said to cost about $120, which is significantly more expensive than conventional bicycles. [8] [11] The cheapest for adults retail at $350 as of 2018, thus the bikes are retailed specifically for the export market. [12]
This variation in cost has two main reasons: the relative wealth of the consumers to whom the bikes are marketed, and the difference in production quality. In the United States, all parts incorporated into the bike are high-end, similar to the parts used in expensive carbon fibre bikes. Modern machines are used to laminate, waterproof, and join the individual bamboo pieces. The Ghanaian bikes, on the other hand, use mostly parts (e.g. bamboo, chains, bolts, etc.) from low-cost sources. [8]
A bicycle, also called a pedal cycle, bike, push-bike or cycle, is a human-powered or motor-assisted, pedal-driven, single-track vehicle, with two wheels attached to a frame, one behind the other. A bicycle rider is called a cyclist, or bicyclist.
Carbon fibers or carbon fibres are fibers about 5 to 10 micrometers (0.00020–0.00039 in) in diameter and composed mostly of carbon atoms. Carbon fibers have several advantages: high stiffness, high tensile strength, high strength to weight ratio, high chemical resistance, high-temperature tolerance, and low thermal expansion. These properties have made carbon fiber very popular in aerospace, civil engineering, military, motorsports, and other competition sports. However, they are relatively expensive compared to similar fibers, such as glass fiber, basalt fibers, or plastic fibers.
A bicycle frame is the main component of a bicycle, onto which wheels and other components are fitted. The modern and most common frame design for an upright bicycle is based on the safety bicycle, and consists of two triangles: a main triangle and a paired rear triangle. This is known as the diamond frame. Frames are required to be strong, stiff and light, which they do by combining different materials and shapes.
A velomobile ; velomobiel, velo, or bicycle car is a human-powered vehicle (HPV) enclosed for aerodynamic advantage and/or protection from weather and collisions. Velomobiles are similar to recumbent bicycles, pedal go-karts and tricycles, but with a full fairing and are not to be confused with purpose-built mobiles for speed records. Fully faired vehicles with two wheels, generally called Streamliners. Streamliners have set many speed and distance records.
Building material is material used for construction. Many naturally occurring substances, such as clay, rocks, sand, wood, and even twigs and leaves, have been used to construct buildings and other structures, like bridges. Apart from naturally occurring materials, many man-made products are in use, some more and some less synthetic. The manufacturing of building materials is an established industry in many countries and the use of these materials is typically segmented into specific specialty trades, such as carpentry, insulation, plumbing, and roofing work. They provide the make-up of habitats and structures including homes.
Cicli Pinarello S.p.A. is an Italian bicycle manufacturer based in Treviso, Italy. Founded in 1953, it supplies mostly handmade bicycles for the road, track, E-bikes(NYTRO), mountain bikes and cyclo-cross. The company also produces an in-house component brand – MOST.
A utility bicycle, city bicycle, urban bicycle, European city bike (ECB), Dutch bike, classic bike or simply city-bike is a bicycle designed for frequent very short, relatively slow rides through very flat urban areas. It is a form of utility bicycle commonly seen around the world, built to facilitate everyday short-distance riding in normal clothes in cold-to-mild weather conditions. It is therefore a bicycle designed for very short-range practical transportation, as opposed to those primarily for recreation and competition, such as touring bicycles, road bicycles, and mountain bicycles. Utility bicycles are the most common form globally, and comprise the vast majority found in the developing world. City bikes may be individually owned or operated as part of a public bike sharing scheme.
A racing bicycle, also known as a road bike is a bicycle designed for competitive road cycling, a sport governed by and according to the rules of the Union Cycliste Internationale (UCI).
The Birdy is a folding bicycle designed by Riese und Müller in Germany and produced by Pacific Cycles in Taiwan. As of 2010 over 100,000 had been sold. Three distinct models have been marketed, in addition to some specialist variations, with the third (Mk3) introduced in July 2015.
Hydroforming is a means of shaping ductile metals such as aluminium, brass, low alloy steel, and stainless steel into lightweight, structurally stiff and strong pieces. One of the largest applications of cost-effective hydroforming is the automotive industry, which makes use of the complex shapes made possible by hydroforming to produce stronger, lighter, and more rigid unibody structures for vehicles. This technique is particularly popular with the high-end sports car industry and is also frequently employed in the shaping of aluminium tubes for bicycle frames.
A roadster bicycle is a type of utility bicycle once common worldwide, and still common in Asia, Africa, Latin America, and some parts of Europe. During the past few decades, traditionally styled roadster bicycles have regained popularity in the Western world, particularly as a lifestyle or fashion statement in an urban environment.
Keith Bontrager is a motorcycle racer who became a pioneer in the development of the modern mountain bike. Between 1980 and 1995, he was president of his own Bontrager Company, which continues to develop components for Trek Bicycle Corporation after Trek bought out Bontrager.
An aluminium alloy (UK/IUPAC) or aluminum alloy is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al–Si, where the high levels of silicon (4–13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.
Lugged steel frame construction is a method of building bicycle frames using steel tubing mated with socket-like sleeves, called lugs. For most of the bicycle's history, steel has been the primary material for bicycle frames, with lugged construction the primary assembling method. Steel continues in use by builders of high-quality steel frames, though its dominance as a frame material has waned since the mid-1990s displaced largely by aluminum and carbon fiber; lugging has been displaced by TIG welding.
A motorcycle frame is a motorcycle's core structure. It supports the engine, provides a location for the steering and rear suspension, and supports the rider and any passenger or luggage. Also attached to the frame are the fuel tank and battery. At the front of the frame is found the steering head tube that holds the pivoting front fork, while at the rear there is a pivot point for the swingarm suspension motion. Some motorcycles include the engine as a load-bearing stressed member; while some other bikes do not use a single frame, but instead have a front and a rear subframe attached to the engine.
Carbon fiber-reinforced polymers, carbon-fibre-reinforced polymers, carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic, also known as carbon fiber, carbon composite, or just carbon, are extremely strong and light fiber-reinforced plastics that contain carbon fibers. CFRPs can be expensive to produce, but are commonly used wherever high strength-to-weight ratio and stiffness (rigidity) are required, such as aerospace, superstructures of ships, automotive, civil engineering, sports equipment, and an increasing number of consumer and technical applications.
Klein was a bicycle company founded by Gary Klein that pioneered the use of large diameter aluminium alloy tubes for greater stiffness and lower weight.
Founded in 2006, Genesis is a UK bike brand manufacturing adventure & gravel, road, urban/utility, e-bike and touring models.
Caminade is an historical and current manufacturer of bicycle frames and bicycle components based in France. Caminade frames were and are manufactured in France. Historical Caminade frames were made of steel and then Dural aluminium. Modern Caminade frames are made of steel. Much like there were four popular historical Caminade models, there are also four modern models:
A gravel bicycle is a type of bicycle intended for gravel cycling, including gravel racing. They are also sometimes known as "adventure bicycles", particularly ones intended for harsher off-road terrain.
