Barycentric Dynamical Time

Last updated

Barycentric Dynamical Time (TDB, from the French Temps Dynamique Barycentrique) is a relativistic coordinate time scale, intended for astronomical use as a time standard to take account of time dilation [1] when calculating orbits and astronomical ephemerides of planets, asteroids, comets and interplanetary spacecraft in the Solar System. TDB is now (since 2006) defined as a linear scaling of Barycentric Coordinate Time (TCB). A feature that distinguishes TDB from TCB is that TDB, when observed from the Earth's surface, has a difference from Terrestrial Time (TT) that is about as small as can be practically arranged with consistent definition: the differences are mainly periodic, [2] and overall will remain at less than 2 milliseconds for several millennia. [3]

Contents

TDB applies to the Solar-System-barycentric reference frame, and was first defined in 1976 as a successor to the (non-relativistic) former standard of ephemeris time (adopted by the IAU in 1952 and superseded 1976). In 2006, after a history of multiple time-scale definitions and deprecation since the 1970s, [4] a redefinition of TDB was approved by the IAU. The 2006 IAU redefinition of TDB as an international standard expressly acknowledged that the long-established JPL ephemeris time argument Teph, as implemented in JPL Development Ephemeris DE405, "is for practical purposes the same as TDB defined in this Resolution". [5] (By 2006, ephemeris DE405 had already been in use for a few years as the official basis for planetary and lunar ephemerides in the Astronomical Almanac; it was the basis for editions for 2003 through 2014; in the edition for 2015 it was superseded by DE430. [6] )

Definition

IAU resolution 3 of 2006 [7] defines TDB as a linear transformation of TCB. TCB diverges from both TDB and TT. TCB progresses faster at a differential rate of about 0.5 second/year, while TDB and TT remain close. [8] As of the beginning of 2011, the difference between TDB and TCB is about 16.6 seconds.

TDB = TCB − LB×(JDTCB − T0)×86400 + TDB0

where LB = 1.550519768×10−8, TDB0 = −6.55×10−5 s, T0 = 2443144.5003725, and JDTCB is the TCB Julian date (that is, a quantity which was equal to T0 on 1977 January 1 00:00:00 TAI at the geocenter and which increases by one every 86400 seconds of TCB).

History

From the 17th century to the late 19th century, planetary ephemerides were calculated using time scales based on the Earth's rotation: usually the mean solar time of one of the principal observatories, such as Paris or Greenwich. After 1884, mean solar time at Greenwich became a standard, later named Universal Time (UT). But in the later 19th and early 20th centuries, with the increasing precision of astronomical measurements, it began to be suspected, and was eventually established, that the rotation of the Earth (i.e. the length of the day) showed irregularities on short time scales, and was slowing down on longer time scales. Ephemeris time was consequently developed as a standard that was free from the irregularities of Earth rotation, by defining the time "as the independent variable of the equations of celestial mechanics", and it was at first measured astronomically, relying on the existing gravitational theories of the motions of the Earth about the Sun and of the Moon about the Earth.

After the caesium atomic clock was invented, such clocks were used increasingly from the late 1950s as secondary realizations of ephemeris time (ET). These secondary realizations improved on the original ET standard by the improved uniformity of the atomic clocks, and (e.g. in the late 1960s) they were used to provide standard time for planetary ephemeris calculations and in astrodynamics.

But ET in principle did not yet take account of relativity theory. The size of the periodic part of the variations due to time dilation between earth-based atomic clocks and the coordinate time of the Solar-System barycentric reference frame had been estimated at under 2 milliseconds, [2] but in spite of this small size, it was increasingly considered in the early 1970s that time standards should be made suitable for applications in which differences due to relativistic time dilation could no longer be neglected.

In 1976, two new time scales were defined [9] to replace ET (in the ephemerides for 1984 and afterwards) to take account of relativity. ET's direct successor for measuring time on a geocentric basis was Terrestrial Dynamical Time (TDT). The new time scale to supersede ET for planetary ephemerides was to be Barycentric Dynamical Time (TDB). TDB was to tick uniformly in a reference frame comoving with the barycenter of the Solar System. (As with any coordinate time, a corresponding clock, to coincide in rate, would need not only to be at rest in that reference frame, but also (an unattainable hypothetical condition) to be located outside all of the relevant gravity wells.) In addition, TDB was to have (as observed/evaluated at the Earth's surface), over the long term average, the same rate as TDT (now TT). TDT and TDB were defined in a series of resolutions at the same 1976 meeting of the International Astronomical Union.

It was eventually realized that TDB was not well defined because it was not accompanied by a general relativistic metric and because the exact relationship between TDB and TDT had not been specified. (It was also later criticized as being not physically possible in exact accordance with its original definition: among other things the 1976 definition excluded a necessary small offset for the initial epoch of 1977.) [10] After the difficulties were appreciated, in 1991 the IAU refined the official definitions of timescales by creating additional new time scales: Barycentric Coordinate Time (TCB) and Geocentric Coordinate Time (TCG). TCB was intended as a replacement for TDB, and TCG was its equivalent for use in near-Earth space. TDT was also renamed to Terrestrial Time (TT), because of doubts raised about the appropriateness of the word "dynamical" in that connection.

In 2006 TDB was redefined by IAU 2006 resolution 3; the 'new' TDB was expressly acknowledged as equivalent for practical purposes to JPL ephemeris time argument Teph; the difference between TDB according to the 2006 standard and TT (both as observed from the surface of the Earth), remains under 2 ms for several millennia around the present epoch. [11]

Use of TDB

TDB is a successor of Ephemeris Time (ET), in that ET can be seen (within the limits of the lesser accuracy and precision achievable in its time) to be an approximation to TDB as well as to Terrestrial Time (TT) (see Ephemeris time § Implementations). TDB in the form of the very closely analogous, and practically equivalent, time scale Teph continues to be used for the important DE405 planetary and lunar ephemerides from the Jet Propulsion Laboratory.

Arguments have been put forward for the continued practical use of TDB rather than TCB based on the very small size of the difference between TDB and TT, not exceeding 0.002 second, which can be neglected for many applications. It has been argued that the smallness of this difference makes for a lower risk of damage if TDB is ever confused with TT, compared to the possible damage of confusing TCB and TT, which have a relative linear drift of about 0.5 second per year, [12] (the difference was close to zero at the start of 1977, and by 2009 was already over a quarter of a minute and increasing). [8]

Related Research Articles

<span class="mw-page-title-main">Astronomical unit</span> Mean distance between Earth and the Sun

The astronomical unit is a unit of length defined to be exactly equal to 149,597,870,700 m. Historically, the astronomical unit was originally conceived as the average Earth-Sun distance, before its modern redefinition in 2012.

The term ephemeris time can in principle refer to time in association with any ephemeris. In practice it has been used more specifically to refer to:

  1. a former standard astronomical time scale adopted in 1952 by the IAU, and superseded during the 1970s. This time scale was proposed in 1948, to overcome the disadvantages of irregularly fluctuating mean solar time. The intent was to define a uniform time based on Newtonian theory. Ephemeris time was a first application of the concept of a dynamical time scale, in which the time and time scale are defined implicitly, inferred from the observed position of an astronomical object via the dynamical theory of its motion.
  2. a modern relativistic coordinate time scale, implemented by the JPL ephemeris time argument Teph, in a series of numerically integrated Development Ephemerides. Among them is the DE405 ephemeris in widespread current use. The time scale represented by Teph is closely related to, but distinct from, the TCB time scale currently adopted as a standard by the IAU.

Terrestrial Time (TT) is a modern astronomical time standard defined by the International Astronomical Union, primarily for time-measurements of astronomical observations made from the surface of Earth. For example, the Astronomical Almanac uses TT for its tables of positions (ephemerides) of the Sun, Moon and planets as seen from Earth. In this role, TT continues Terrestrial Dynamical Time, which succeeded ephemeris time (ET). TT shares the original purpose for which ET was designed, to be free of the irregularities in the rotation of Earth.

A time standard is a specification for measuring time: either the rate at which time passes or points in time or both. In modern times, several time specifications have been officially recognized as standards, where formerly they were matters of custom and practice. An example of a kind of time standard can be a time scale, specifying a method for measuring divisions of time. A standard for civil time can specify both time intervals and time-of-day.

Universal Time is a time standard based on Earth's rotation. While originally it was mean solar time at 0° longitude, precise measurements of the Sun are difficult. Therefore, UT1 is computed from a measure of the Earth's angle with respect to the International Celestial Reference Frame (ICRF), called the Earth Rotation Angle. UT1 is the same everywhere on Earth. UT1 is required to follow the relationship

In astronomy and celestial navigation, an ephemeris is a book with tables that gives the trajectory of naturally occurring astronomical objects as well as artificial satellites in the sky, i.e., the position over time. Historically, positions were given as printed tables of values, given at regular intervals of date and time. The calculation of these tables was one of the first applications of mechanical computers. Modern ephemerides are often provided in electronic form. However, printed ephemerides are still produced, as they are useful when computational devices are not available.

The light-second is a unit of length useful in astronomy, telecommunications and relativistic physics. It is defined as the distance that light travels in free space in one second, and is equal to exactly 299792458 m.

Barycentric Coordinate Time is a coordinate time standard intended to be used as the independent variable of time for all calculations pertaining to orbits of planets, asteroids, comets, and interplanetary spacecraft in the Solar System. It is equivalent to the proper time experienced by a clock at rest in a coordinate frame co-moving with the barycenter of the Solar System : that is, a clock that performs exactly the same movements as the Solar System but is outside the system's gravity well. It is therefore not influenced by the gravitational time dilation caused by the Sun and the rest of the system. TCB is the time coordinate for the Barycentric Celestial Reference System (BCRS).

Geocentric Coordinate Time is a coordinate time standard intended to be used as the independent variable of time for all calculations pertaining to precession, nutation, the Moon, and artificial satellites of the Earth. It is equivalent to the proper time experienced by a clock at rest in a coordinate frame co-moving with the center of the Earth : that is, a clock that performs exactly the same movements as the Earth but is outside the Earth's gravity well. It is therefore not influenced by the gravitational time dilation caused by the Earth. The TCG is the time coordinate for the Geocentric Celestial Reference System (GCRS).

The astronomical system of units, formerly called the IAU (1976) System of Astronomical Constants, is a system of measurement developed for use in astronomy. It was adopted by the International Astronomical Union (IAU) in 1976 via Resolution No. 1, and has been significantly updated in 1994 and 2009.

An astronomical constant is any of several physical constants used in astronomy. Formal sets of constants, along with recommended values, have been defined by the International Astronomical Union (IAU) several times: in 1964 and in 1976. In 2009 the IAU adopted a new current set, and recognizing that new observations and techniques continuously provide better values for these constants, they decided to not fix these values, but have the Working Group on Numerical Standards continuously maintain a set of Current Best Estimates. The set of constants is widely reproduced in publications such as the Astronomical Almanac of the United States Naval Observatory and HM Nautical Almanac Office.

<span class="mw-page-title-main">Theoretical astronomy</span> Applied and interdisciplinary physics

Theoretical astronomy is the use of analytical and computational models based on principles from physics and chemistry to describe and explain astronomical objects and astronomical phenomena. Theorists in astronomy endeavor to create theoretical models and from the results predict observational consequences of those models. The observation of a phenomenon predicted by a model allows astronomers to select between several alternate or conflicting models as the one best able to describe the phenomena.

In the theory of relativity, it is convenient to express results in terms of a spacetime coordinate system relative to an implied observer. In many coordinate systems, an event is specified by one time coordinate and three spatial coordinates. The time specified by the time coordinate is referred to as coordinate time to distinguish it from proper time.

<span class="mw-page-title-main">Dynamical time scale</span> Time standard

In time standards, dynamical time is the independent variable of the equations of celestial mechanics. This is in contrast to time scales such as mean solar time which are based on how far the earth has turned. Since Earth's rotation is not constant, using a time scale based on it for calculating the positions of heavenly objects gives errors. Dynamical time can be inferred from the observed position of an astronomical object via a theory of its motion. A first application of this concept of dynamical time was the definition of the ephemeris time scale (ET).

Elena Vladimirovna Pitjeva is a Russian astronomer working at the Institute of Applied Astronomy, Russian Academy of Sciences, St. Petersburg. She has published over 100 articles, as listed in Google Scholar and the Astrophysics Data System in the field of solar system dynamics and celestial mechanics.

Jet Propulsion Laboratory Development Ephemeris designates one of a series of mathematical models of the Solar System produced at the Jet Propulsion Laboratory in Pasadena, California, for use in spacecraft navigation and astronomy. The models consist of numeric representations of positions, velocities and accelerations of major Solar System bodies, tabulated at equally spaced intervals of time, covering a specified span of years. Barycentric rectangular coordinates of the Sun, eight major planets and Pluto, and geocentric coordinates of the Moon are tabulated.

Erland Myles Standish Jr. is a mathematical astronomer largely working in the field of solar system dynamics and celestial mechanics. He is a former professor at Yale University and had worked for the Jet Propulsion Laboratory.

In astronomy, planetary mass is a measure of the mass of a planet-like astronomical object. Within the Solar System, planets are usually measured in the astronomical system of units, where the unit of mass is the solar mass (M), the mass of the Sun. In the study of extrasolar planets, the unit of measure is typically the mass of Jupiter (MJ) for large gas giant planets, and the mass of Earth (ME) for smaller rocky terrestrial planets.

A fundamental ephemeris of the Solar System is a model of the objects of the system in space, with all of their positions and motions accurately represented. It is intended to be a high-precision primary reference for prediction and observation of those positions and motions, and which provides a basis for further refinement of the model. It is generally not intended to cover the entire life of the Solar System; usually a short-duration time span, perhaps a few centuries, is represented to high accuracy. Some long ephemerides cover several millennia to medium accuracy.

The barycentric celestial reference system (BCRS) is a coordinate system used in astrometry to specify the location and motions of astronomical objects. It was created in 2000 by the International Astronomical Union (IAU) to be the global standard reference system for objects located outside the gravitational vicinity of Earth: planets, moons, and other Solar System bodies, stars and other objects in the Milky Way galaxy, and extra-galactic objects.

References

  1. Explanations given with (a) IAU resolutions 1991, under Resolution A.4, at 'Notes for recommendation III', and IAU 2006 resolution 3, and its footnotes; and (b) explanations and references cited at "Time dilation -- due to gravitation and motion together".
  2. 1 2 The periodic differences, due to relativistic effects, between a coordinate time scale applicable to the Solar-System barycenter, and time measured at the Earth's surface, were first estimated and are explained in: G M Clemence & V Szebehely, "Annual variation of an atomic clock", Astronomical Journal, Vol.72 (1967), p.1324-6.
  3. IAU 2006 resolution 3, see Recommendation and footnotes, note 3.
  4. (a)P K Seidelmann & T Fukushima (1992), "Why new time scales?", Astronomy & Astrophysics vol.265 (1992), pages 833-838: and (b) IAU resolution (1991) A.4(recommendation V), which recommended limiting the use of TDB (previously defined 1976-79) to cases "where discontinuity with previous work is deemed to be undesirable".
  5. IAU 2006 resolution 3, see footnotes, note 4.
  6. See US Naval Observatory (Naval Oceanography Portal), "History of the Astronomical Almanac" Archived 2009-03-05 at the Wayback Machine (accessed October 2015); also, for details of DE405: E. M. Standish (1998), JPL Planetary and Lunar Ephemerides, DE405/LE405, Jet Propulsion Laboratory Interoffice Memorandum 312F-98-48, August 26, 1998; also, the Astronomical Almanac for 2015 commences use of the more recent JPL ephemeris version DE430, which is now based expressly on TDB, see section L, especially page L-4 Astronomical Almanac for 2015, page L-4 (accessed October 2015).
  7. IAU 2006 resolution 3
  8. 1 2 Fig. 1 at p.835, a graph giving an overview of the rate differences and offsets between various standard time scales, present and past, defined by the IAU: for description see P K Seidelmann & T Fukushima (1992), "Why new time scales?", Astronomy & Astrophysics vol.265 (1992), pages 833-838.
  9. They were defined in substance in 1976 but given their names in 1979.
  10. E M Standish (1998), "Time scales in the JPL and CfA ephemerides", Astronomy and Astrophysics, v.336 (1998), p.381-384.
  11. IAU 2006 resolution 3, see especially footnotes 3 and 4.
  12. S A Klioner (2008), "Relativistic scaling of astronomical quantities and the system of astronomical units", Astronomy and Astrophysics, vol.478 (2008), pp.951-958, at page 953.