This article needs additional citations for verification .(November 2024) |
Overview | |||
---|---|---|---|
Locale | Cheshire Merseyside | ||
Successor | British Railways | ||
Technical | |||
Track gauge | 4 ft 8+1⁄2 in (1,435 mm) standard gauge | ||
|
The Birkenhead Railway was a railway company in North West England. It was incorporated as the Birkenhead, Lancashire and Cheshire Junction Railway (BL&CJR) in 1846 to build a line connecting the port of Birkenhead and the city of Chester with the manufacturing districts of Lancashire by making a junction near Warrington with the Grand Junction Railway. The BL&CJR took over the Chester and Birkenhead Railway in 1847, keeping its own name for the combined company until it shortened its name to the Birkenhead Railway in 1859. [1] It was taken over jointly, on 1 January 1860, by the London and North Western Railway (LNWR) and the Great Western Railway (GWR). [2] It remained a joint railway until nationalisation of the railways in 1948. [1]
Apart from the Hooton–West Kirby line which closed in 1962 almost the whole BL&CJR network is still in mainline use. Part of the railway is now used by the Chester branch of the Wirral Line, one of the two urban electric commuter rail services operated by Merseyrail on Merseyside. [3]
Interests in the Birkenhead docks were aware that they needed a railway connection to wards Manchester and the Lancashire manufacturing districts, to enable them to compete with the Port of Liverpool, served by the busy Liverpool and Manchester Railway (L&MR). The Birkenhead, Lancashire and Cheshire Junction Railway was incorporated on 26 June 1846 with capital of £1,500,000, to build a line from Chester to Walton Junction, near Warrington, where it would connect with the Grand Junction Railway (GJR), leading to Manchester. The London and North Western Railway (LNWR) was formed by merging the GJR, the L&MR, and others on 16 July 1846. This left the BL&CJR out on its own, and its attempts to negotiate for access at Warrington and beyond were frustrated for some time. [4] [5]
In late 1846 negotiations for a merger of the Chester and Birkenhead Railway and the Birkenhead, Lancashire and Cheshire Junction Railway were finalising. A parliamentary bill authorising the merger was submitted, and it was passed on 22 July 1847, but provisions for leasing by other companies, chiefly the LNWR, were removed because of concerns about interests other than development of the docks. Nevertheless the BL&CJR now controlled the Birkenhead line. [4] [6]
A joint station was opened at Chester on 1 August 1848; it cost £55,000 and was to be jointly operated and accessible to the LNWR, Chester and Holyhead Railway, Shrewsbury and Chester Railway (S&CR), and Birkenhead, Lancashire and Cheshire Junction Railway. [7] [8]
The Shrewsbury and Chester Railway had emerged from the North Wales Mineral Railway, and brought considerable volumes of minerals, chiefly coal, from Flintshire to Birkenhead; there was a triangle of lines at Chester station, enabling these trains to avoid the station. The LNWR felt threatened by this traffic, which it considered should come to it. Moreover the Shrewsbury and Chester Railway was aligning itself with the Great Western Railway (GWR) as a possible through route to London via Shrewsbury. The LNWR started upon hostile acts towards the Birkenhead line and the Shrewsbury and Chester line, and these escalated in aggression and illegality.
The BL&CJR directors were supine in the face of these acts until a shareholders' meeting on 23 October 1850, when shareholder dissatisfaction motivated the board to take a firmer line with the LNWR. The Shrewsbury and Chester (Birkenhead Station) Act 1851 gave the Shrewsbury and Chester Railway running powers to Birkenhead greatly increasing the traffic. [7] [9] [10]
On 30 April 1851 the Sutton Tunnel railway accident took place near Frodsham on the line to Warrington. Nine people died. The collision was caused by a loosely managed time-interval system which was in operation; the directors were heavily criticised for their lax management of the line. [11] [12] [13]
In January 1854 there was renewed hostility against the Shrewsbury and Chester Railway, and the matter went to arbitration; the arbitrator found in favour of the S&CR and awarded them running powers which gave them access to Manchester and Liverpool, as well as other important benefits.
In 1851 negotiations for a lease of the BL&CJR to the GWR were started, [10] but the idea fell through. Soon the rival LNWR attempted a lease of the BL&CJR, but the Birkenhead Town and Dock Commissioners successfully objected, because of the LNWR commitment to Liverpool.
From 1 September 1854 the GWR and the Shrewsbury and Chester Railway amalgamated, and the GWR was given running powers to Birkenhead, and was able to take advantage of the Manchester and Liverpool powers. [14] [15]
The hostility between the companies waned a little and in 1858 the BL&CJR suggested joint ownership by the LNWR and GWR of their company. By an act of Parliament on 1 August 1859 the BL&CJR company changed its name to the Birkenhead Railway, and the transfer of ownership took effect on 1 January 1860. [note 1] [16] [6] [17] [18]
The LNWR opened the direct line over the Mersey at Runcorn on 1 February 1868, allowing London to Liverpool trains to avoid Warrington. In 1873 this was followed by their opening of the Halton Curve between Frodsham Junction and Helsby Junction. This considerably shortened the transit time between Chester and Liverpool and abstracted nearly all of the passenger traffic that had gone via Birkenhead and the Mersey ferries. [19]
On 20 January 1886 the Mersey Railway opened between Liverpool James Street and Green Lane Junction in Birkenhead, where it entered on the Chester–Birkenhead line. The Mersey Railway was steam operated through steeply graded tunnels under the River Mersey. The section of the Joint Line at Green Lane Junction was already very congested, and it was agreed to make an interchange station at Rock Ferry, about 1 mile (1.6 km) south of the junction, with the Mersey Railway providing its own separate tracks to get there. The Mersey Railway extension to Rock Ferry opened on 15 June 1891. [20] [21]
For a short time there was a through service from Liverpool Central to London Paddington, via the Mersey Railway, starting in 1898. [21]
In 1923 most of the railway companies of Great Britain were formed into one or other of four large new companies, in a process called the "grouping", following the Railways Act 1921. The GWR was largely unchanged in this part of the country; the LNWR joined the Midland Railway and others to form the new London Midland and Scottish Railway (LMS). The Mersey Railway remained independent but was broadly aligned to the LMS. The Joint Railway continued to be joint, now between the GWR and the LMS. [17]
Road competition, especially for local passenger journeys, increased in intensity at this period, chiefly because of the roundabout nature of railway journeys from branch line settlements and the inconvenient location of many stations.
During World War II Liverpool suffered from heavy enemy bombing, but although the railway suffered damage, there was no strategic disruption. Birkenhead docks was heavily used for military purposes. A connection was laid in at Mickle Trafford between the Joint Line and the Cheshire Lines Committee route there, so as to divert goods traffic via Bidston, avoiding Chester General station. [22]
At the beginning of 1948 British Railways was established as a state-owned organisation. Little initiative was taken to rationalise the formerly competing facilities, such as the wasteful multiple goods depots. Much continued as before, but the transfer of bulk goods to containers, and the increasing use of road transport abstracted from the railway, which declined, as did passenger business.
The Chester and Birkenhead Railway was authorised on 12 July 1837, with capital of £250,000. It was to be a single line; no intermediate stations had been planned at this stage. George Stephenson was the engineer. [23] [6] [24] It opened in 1840.
The Chester–Warrington line opened in 1850 and runs from Chester to a junction with the West Coast Main Line south of Warrington.
As much of the goods and mineral traffic to and from Birkenhead had Manchester as its terminal, the Joint companies decided to build the Helsby branch, a straight route of nearly 9 miles (14 km). It intersected the Shropshire Union Canal at Ellesmere Port, then a very busy dock, but no railway connection was made there. The branch opened on 1 July 1863, shortening the transit to Manchester by 11 miles (18 km). [25] [6]
A branch from Hooton to Parkgate was planned, chiefly to access collieries at Neston, and potentially to develop a residential district. It opened on 1 October 1866 as a single line, with provision for later doubling and extension beyond Parkgate. [26] [27]
In 1881 the Joint Line directors decided to extend the railway from Parkgate to West Kirby, along a developing residential strip. This was authorised by an Act of 12 July 1882. It was hoped to agree a joint station with the Seacombe, Hoylake and Deeside Railway, [note 2] proprietors of the existing West Kirby station, fed from the Birkenhead end via Hoylake, but this proved impossible and a separate station was built. The line opened on 19 April 1886, and the passenger train service ran from Birkenhead Woodside to West Kirby via Hooton. In fact the two stations at West Kirby were combined in 1896. [28] [29]
The Hooton–West Kirby line had never realised its potential, and it was closed to passengers on 17 September 1956, and to freight traffic in May 1962. [29] The track bed of this route is now the Wirral Way, a footpath forming part of the Wirral Country Park.
Stations:
The Wirral Railway was a railway network in the northern part of the Wirral Peninsula, England. Its route was from Birkenhead Park in the east of the Wirral to West Kirby in the west. A branch off this line at Bidston went north to Secombe and New Brighton. It was incorporated in 1863 as the Hoylake Railway, running from Hoylake to Birkenhead Docks. After changes of name and of ownership, it was purchased by the Wirral Railway Company Limited in 1884. The network was extended to West Kirby, New Brighton, and Seacombe, and to Birkenhead Park station where it joined the Mersey Railway, enabling through trains through the Mersey Railway Tunnel to Liverpool. In the 1923 grouping the Wirral company became part of the London, Midland and Scottish Railway, which electrified the line in 1938, allowing passenger services to be integrated with the Liverpool urban system. Most of the Wirral Railway network is still in use today as part of the Wirral Line of the Merseyrail rail network.
The Wirral line is one of two commuter rail routes operated by Merseyrail and centred on Merseyside, England, the other being the Northern line.
The Chester–Birkenhead line runs from Chester to Birkenhead via Hooton. Today, it forms part of the Wirral Line network, a commuter rail system operated by Merseyrail. The line was built by the Chester and Birkenhead Railway and opened on 23 September 1840. On 22 July 1847 the railway merged with the Birkenhead, Lancashire and Cheshire Junction Railway which was later renamed to Birkenhead Railway.
West Kirby railway station serves the town of West Kirby in Merseyside, England. The station is the terminus of the West Kirby branch line, which is one of the two branches of the Wirral Line on the Merseyrail network. There is a central island platform between two terminus tracks and two parallel sidings for out-of-use electric multiple units. A second station, which was the terminus of a branch line from Hooton, lay to the east of the Wirral Line station; it was closed in 1962.
Birkenhead Park railway station is a station serving the town of Birkenhead, in Merseyside, England. It lies on the Wirral Line of the Merseyrail network.
The Shrewsbury and Birmingham Railway was authorised in 1846. It agreed to joint construction with others of the costly Wolverhampton to Birmingham section, the so-called Stour Valley Line. This work was dominated by the hostile London and North Western Railway, which used underhand and coercive tactics. The section between Shrewsbury and Wellington was also built jointly, in this case with the Shropshire Union Railway.
Chester railway station is located in Newtown, Chester, England. Services are operated by Avanti West Coast, Merseyrail, Northern and Transport for Wales. From 1875 to 1969, the station was known as Chester General to distinguish it from Chester Northgate. The station's Italianate frontage was designed by the architect Francis Thompson.
Hooton railway station is situated in the south of the Wirral Peninsula, Cheshire, England. It lies on the Wirral Line 8 miles (13 km) north of Chester and 9+1⁄2 miles (15.3 km) south west of Liverpool Lime Street on the Merseyrail network, and is the junction of the branch from the Chester line to Ellesmere Port. It serves the villages of Hooton and Willaston.
Birkenhead Woodside was a railway station located at Woodside, in Birkenhead, on the Wirral Peninsula, Cheshire. It served both local services within Cheshire and long-distance services to southern England, including London.
Moreton railway station serves the town of Moreton, in Merseyside, England. The station is on the West Kirby branch of the Wirral Line, which is part of the Merseyrail network.
Hoylake railway station serves the town of Hoylake, Merseyside, England. It lies on the West Kirby branch of the Wirral Line, part of the Merseyrail network.
Hadlow Road railway station is a Grade II listed heritage railway station and museum in Willaston, on the Wirral Way footpath. It has been restored to have the look and feel of the day the station was permanently closed to passengers in 1956. It has an authentic ticket office, waiting room and telephone box. Formerly the museum was a working railway station on the single track Hooton to West Kirby branch of the Birkenhead Railway, on the Wirral Peninsula, Cheshire. The station is owned by Cheshire West and Chester Council, and Friends of Hadlow Road Station (FHRS) help to maintain and develop the station as a community resource.
Caldy railway station was a station on the single track Hooton to West Kirby branch of the Birkenhead Railway, on the Wirral Peninsula, England.
Kirby Park railway station was a station on the single track Hooton to West Kirby branch of the Birkenhead Railway, on the Wirral Peninsula, England.
Birkenhead Dock Branch is a disused railway line running from the South junction of Rock Ferry, to the site of the former Bidston Dock on the Wirral Peninsula, England. The branch is approximately 4+1⁄2 miles (7.2 km) in length. Although called a branch, the line was accessible from both ends, from Bidston East junction and from Rock Ferry railway station. The former Mollington Street Rail Depot was branched into the line. A section of the line runs through Haymarket Tunnel and a low-level cutting through the centre of Birkenhead; visible from the road flyovers. The former Canning Street North signal box has now been demolished following fire damage, and the rails across the level crossing there have been removed due to the provision of cycle lanes on the roadway. The non-standard gates remain on the east side, but a fence has been erected on the other side despite the railway being officially out of use, rather than closed. Level crossings are also located at Duke Street and Wallasey Bridge Road. The railway lines are still partially intact.
Thurstaston railway station was a station on the single track Hooton to West Kirby branch of the Birkenhead Railway, on the Wirral Peninsula, England. The station served the village of Thurstaston situated to the north east.
Parkgate railway station was a station on the single track Hooton to West Kirby branch of the Birkenhead Railway, on the Wirral Peninsula, Cheshire, England. The station served the village of Parkgate.
Neston South railway station was a station on the single track Hooton to West Kirby branch of the Birkenhead Railway, on the Wirral Peninsula, Cheshire, England. The station served the town of Neston.
Saltney was a minor railway station located on the Great Western Railway's Paddington to Birkenhead line a few miles west of Chester, England. Although the station is now closed, the route is still open today as part of the Shrewsbury to Chester Line.
The North Wales Mineral Railway was formed to carry coal and ironstone from the mineral-bearing area around Wrexham to the River Dee wharves. It was extended to run from Shrewsbury and formed part of a main line trunk route, under the title the Shrewsbury and Chester Railway. It opened in 1846 from Chester to Ruabon, and in 1848 from Ruabon to Shrewsbury. It later merged with the Great Western Railway.