Bonomi BS.5 Ballerina

Last updated
BS.5 Ballerina
RoleIntermediate training glider
National origin Italy
Manufacturer Aeronautica Bonomi
Designer Camillo Silva
First flight1934
Number built2

The Bonomi BS.5 Ballerina (English: Wagtail) was a single seat, medium performance training glider designed and built in Italy in the 1930s.

Contents

Design and development

The Ballerina was a high, braced wing aircraft. The wing was mounted on a central pedestal and had a central, straight edged, constant chord centre section, built in two parts, which occupied about a third of the span. There were straight tapered outer panels which carried the ailerons and ended at rounded tips. On each side a pair of V-shaped, faired, steel struts braced the outer ends of the centre section to the base of the fuselage. [1]

The fuselage had an hexagonal cross-section with deep, almost upright sides, its upper surfaces curving down over the nose. It was entirely plywood covered. The cockpit was immediately in front of the wing leading edge, placing the pilot's head on the front of the pedestal. A wooden skid with a rubber shock absorbers ran along the underside to form an undercarriage, assisted by a small, faired tail skid. Under the trailing edge the fuselage dropped down from the pedestal then tapered to the rear. The tail surfaces were all straight tapered and square tipped, with almost all of the surfaces moving. Enough fixed fin and tailplane was retained to allow aerodynamic balancing via an inset hinge. [1]

The Ballerina was capable of using both ridge and thermal lift. Pilots could use it to gain their C badge. [1]

Operational history

At least two Ballerinas were built, slightly different in dimensions and dihedral [1] and the reconstructed pre-war Italian civil register suggests there may have been a third. [2] Two spent some time in Egypt, brought in by Italians but operated by the Egyptian Aero Club. [3]

Specifications

Data from Pedrielli (2011) p.79 [1]

General characteristics

Performance


Related Research Articles

The Bonomi BS.4 Basettino was a primary glider designed and built in Italy in the 1930s.

The Bonomi BS.10 Ardea was an Italian single seat high performance glider, designed and built in the mid-1930s. Only one was built.

The Bonomi BS.14 Astore was a two-seat training and aerobatic glider, designed and built in Italy in 1935. Only one was constructed.

The Bonomi BS.18 Airone was a single seat training glider, designed in Italy in 1936. Only one was built.

The Bonomi BS.22 Alzavola was a training motor glider, intended to acquaint capable glider pilots with the characteristics of powered aircraft. The sole example was designed and built in Italy in the late 1930s.

The Bazzocchi EB.2 was a one off, Italian single seat glider designed and built by a university student in 1936, his second design of the year.

The Tedeschi E.T.186 was a simple, single seat training glider built in Italy and first flown in 1947. Only one was constructed.

The Pagliani Vittoria was a single-seat glider built in Italy during Second World War. Only one was constructed.

The Caproni Vizzola MF and 2 were single-seat gliders built in Italy just before world War II. Intended as training aircraft capable of aerobatics, the two variants differed only in their fuselages. Only one of each was built, but they were both successful in Italian competitions.

The Sala N1 or N1 Sala was a single-seat,18 m span competition glider built in Italy in 1937. Only one was constructed.

The Mantelli-Fossa MF-1 was a single-seat primary glider built in Italy in 1934. Only one was constructed.

The GP1 was an Italian glider constructed by university students in Pavia in 1925. Only one was built.

The Teichfuss Gabbiano was an Italian, one-off, single seat, high performance glider, designed by Luigi Teichfuss and flown in 1928.

The Teichfuss Nibio was an Italian single seat glider, designed by Luigi Teichfuss and flown in two versions around 1930.

The Teichfuss Falco was an Italian single-seat, intermediate-performance glider, designed by Luigi Teichfuss and flown in 1931.

The Teichfuss Grifo was an Italian training glider designed by Luigi Teichfuss and flown in 1934. It was built in small numbers.

The Teichfuss Supergrifo or Super Grifo was an Italian competition glider designed by Luigi Teichfuss and flown in 1935. Only one was built.

The Teichfuss Sparviero was an Italian single seat aerobatic glider, designed by Luigi Teichfuss and flown in 1938.

The Teichfuss Turbine was an Italian single seat high performance glider, designed by Luigi Teichfuss and flown in 1939.

The Teichfuss Balilla was an Italian single seat primary glider, designed by Luigi Teichfuss and flown in 1939.

References

  1. 1 2 3 4 5 Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 76–7. ISBN   9783980883894.
  2. ↑ Air Britain: pre-war Italian register (Malcolm Fillmore)
  3. ↑ Fekecs, Gábor (Spring 2013). "László Ede Almásy. The Real English Patient" (PDF). VGC News (137): 37.[ permanent dead link ]
  4. ↑ Zuerl, Hubert (1941). Segelflug im Wettbewerb der Völker. Berlin: E. S. Mittler & Sohn. pp. 38, 42.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.