Brassie

Last updated
A Strong 2 wood Strong2wood.jpg
A Strong 2 wood

Brassie is the old traditional name for a wood No. 2 golf club. Brassies have a loft that is higher than that of a driver, but less than a 3 wood.

Contents

History

It was the second longest club in the bag and was made especially for long shots out of bad lies and from hard ground.

The name brassie comes from its soleplate made out of brass, an alloy of copper and zinc. The dense soleplate gives the brassie a lower center of gravity and lifts up the ball faster and easier than with a traditional driver.

The brassie was very different from a modern 2-wood; but in loft, appearance and use, the brassie is the antique club that is most related to a 2-wood. "Brassie" is most commonly applied to pre-20th Century times. [1]

Today

The brassie did not find the way into modern golf bags because of its limited use.

Tour Brassie by Taylor Made In the 1980s TaylorMade-Adidas came up with a model range of metal woods and to push the market launch they gave their clubs historic names. So the Brassie came back named as the Taylor Made Tour Brassie (Wood No. 2).

Tour Brassie by Adams

In the 1990s Adams introduced the Tight Lies Tourbrassie as a low lofted fairway wood named STRONG 2.

Today's 2 woods generally have a loft between 14° and 11° and they have a smaller clubhead than the modern drivers. Some of the newest 2 wood models are named Mini Drivers (Taylor Made Mini Driver, Callaway Mini Driver) by manufacturer.

List of historic golf club names and their modern pendant [ when defined as? ]

HistoricToday
DriverDriver
BrassieWood 2
SpoonWood 3
BaffyWood 4
Cleek / Driving IronIron 1
Mid IronIron 2
Mid MashieIron 3
Mashie IronIron 4
MashieIron 5
Spade MashieIron 6
Mashie NiblickIron 7
LofterIron 8
NiblickIron 9
JiggerPitching Wedge

Related Research Articles

<span class="mw-page-title-main">Disc golf</span> Sport in which players attempt to throw a disc into a target

Disc golf, also known as frisbee golf, is a flying disc sport in which players throw a disc at a target; it is played using rules similar to golf.

<span class="mw-page-title-main">Sand wedge</span> Type of golf club

A sand wedge, or sand iron, is a type of golf club, an open-faced wedge primarily designed for getting out of sand bunkers. It has the widest sole of any wedge, which provides the greatest amount of bounce, allowing the club head to glide through sand and avoid digging in. After Gene Sarazen had success in 1932 with a new club that he had invented for sand play, its popularity quickly grew. The club can be advantageous in other soft lies—such as thick rough, soggy ground, or mud—and is also used from firmer grass lies for lobs or chips.

<span class="mw-page-title-main">Golf course</span> Series of holes designed for the game of golf

A golf course is the grounds on which the sport of golf is played. It consists of a series of holes, each consisting of a tee box, a fairway, the rough and other hazards, and a green with a cylindrical hole in the ground, known as a "cup". The cup holds a flagstick, known as a "pin". A standard round of golf consists of 18 holes, and as such most courses contain 18 distinct holes; however, there are many 9-hole courses and some that have holes with shared fairways or greens. There are also courses with a non-standard number of holes, such as 12 or 14.

A golf club is a club used to hit a golf ball in a game of golf. Each club is composed of a shaft with a grip and a club head. Woods are mainly used for long-distance fairway or tee shots; irons, the most versatile class, are used for a variety of shots; hybrids that combine design elements of woods and irons are becoming increasingly popular; putters are used mainly on the green to roll the ball into the hole. A set of clubs is limited by the rules of golf to a maximum of 14 golf clubs, and while there are traditional combinations sold at retail as matched sets, players are free to use any combination of legal clubs.

<span class="mw-page-title-main">Golf ball</span> Ball used in the sport of golf

A golf ball is a ball designed to be used in golf. Under the rules of golf, a golf ball has a mass no more than 1.620 oz (45.9 g), has a diameter not less than 1.680 inches (42.7 mm), and performs within specified velocity, distance, and symmetry limits. Like golf clubs, golf balls are subject to testing and approval by The R&A and the United States Golf Association, and those that do not conform with regulations may not be used in competitions (Rule 5–1).

The following is a glossary of the terminology currently used in the sport of golf. Where words in a sentence are also defined elsewhere in this article, they appear in italics. Old names for clubs can be found at Obsolete golf clubs.

<span class="mw-page-title-main">Wedge (golf)</span> Type of golf club used in special situations

In the sport of golf, a wedge is a subset of the iron family of golf clubs designed for special use situations. As a class, wedges have the highest lofts, the shortest shafts, and the heaviest clubheads of the irons. These features generally aid the player in making accurate short-distance "lob" shots, to get the ball onto the green or out of a hazard or other tricky spot. In addition, wedges are designed with modified soles that aid the player in moving the clubhead through soft lies, such as sand, mud, and thick grass, to extract a ball that is embedded or even buried. Wedges come in a variety of configurations, and are generally grouped into four categories: pitching wedges, sand wedges, gap/approach wedges and lob wedges.

In golf, a gap wedge, also known as an approach wedge, is a wedge used to hit a shot with higher and shorter trajectory than a pitching wedge and lower and longer trajectory than a sand wedge. The name derives from the club's design to fill the "gap" between sand and pitching wedges.

A pitching wedge is a wedge used to hit a shot with higher and shorter trajectory than a 9-iron and a lower and longer trajectory than a gap wedge.

TaylorMade Golf Company is an American sports equipment manufacturing company based in Carlsbad, California, United States. The company focuses on the golf equipment market, producing golf clubs, balls, and clothing. TaylorMade Golf is currently a subsidiary of Centroid Investment Partners after it was purchased from KPS Capital Partners in May 2021.

The R7 Quad is a line of golf clubs manufactured by TaylorMade. Since its introduction in 2004, it has been the most-used driver on the PGA Tour and the best-selling driver in the amateur market.

<span class="mw-page-title-main">Golf equipment</span> Items used to play the sport of golf

Golf equipment encompasses the various items that are used to play the sport of golf. Types of equipment include the golf ball, golf clubs, and devices that aid in the sport.

Early golf clubs were all made of wood. They were hand-crafted, often by the players themselves, and had no standard shape or form. As the sport of golf developed, a standard set of clubs began to take shape, with different clubs being fashioned to perform different tasks and hit various types of shot. Later, as more malleable iron became widely used for shorter-range clubs, an even wider variety of clubs became available.

<span class="mw-page-title-main">Wood (golf)</span> Type of golf club

A wood is a type of club used in the sport of golf. Woods have longer shafts and larger, rounder heads than other club types, and are used to hit the ball longer distances than other types.

<span class="mw-page-title-main">Iron (golf)</span> Type of golf club

An iron is a type of club used in the sport of golf to propel the ball towards the hole. Irons typically have shorter shafts and smaller clubheads than woods, the head is made of solid iron or steel, and the head's primary feature is a large, flat, angled face, usually scored with grooves. Irons are used in a wide variety of situations, typically from the teeing ground on shorter holes, from the fairway or rough as the player approaches the green, and to extract the ball from hazards, such as bunkers or even shallow water hazards.

<span class="mw-page-title-main">Hybrid (golf)</span> Type of golf club

A hybrid is a type of club used in the sport of golf with a design borrowing from both irons and woods while differing from both. The name "hybrid" comes from genetics to denote a mixture of two different species with desirable characteristics of both, and the term here has been generalized, combining the familiar swing mechanics of an iron with the more forgiving nature and better distance of a wood.

<span class="mw-page-title-main">John Erickson (golfer)</span> American professional golfer (born 1964)

John Erickson is an American professional golfer who played the Canadian Tour from 1987 to 1994 and the PGA Tour of Australasia Tour from 1987 to 1992.

<span class="mw-page-title-main">Golf</span> Club-and-ball sport

Golf is a club-and-ball sport in which players use various clubs to hit a ball into a series of holes on a course in as few strokes as possible.

A lob wedge, also known as a lofted wedge or an L-Wedge, is a wedge used in the sport of golf, known for being one of the shortest-hitting clubs and providing the most loft on a shot. Lob wedges are used to produce shots with a very high arc, and are most often used for shots over hazards and other obstructions. Due to the high arc of the shot the lob wedge, like the other wedges in the set of irons, produces little roll after landing on the putting green and can even be used to produce backspin if necessary. Lob wedges are one of the newest additions to the modern collection of golf clubs and, along with the sand wedge and gap wedge, were not included prior to 1931.

<span class="mw-page-title-main">Terry McCabe</span>

Terrill "Terry" McCabe was an American golf club designer and innovator. His peers have labeled him a 'master craftsman' and "Quite simply, the best metalwood designer in golf, as proved at TaylorMade, Founders Club and Titleist."

References

  1. British Golf Museum