The Chesapeake and Ohio class H-8 was a class of 60 simple articulated 2-6-6-6 steam locomotives built by the Lima Locomotive Works in Lima, Ohio between 1941 and 1948, operating until the mid 1950s. The locomotives were among the most powerful steam locomotives ever built and hauled fast, heavy freight trains for the railroad. Only two units were preserved; Nos. 1601 and 1604.
In 1939, the C&O was in the market for new locomotive power for its coal traffic. The railroad already had 40 Lima-built 2-10-4T-1s from 1930 which ran across the largely level trackage in Ohio, while 45 2-8-8-2 H-7s dating back to 1924-1926 plodded away in mountainous territories of West Virginia and Virginia. Seemingly poised to order more Superpower T-1s, Norfolk & Western's success with their home-built Class A2-6-6-4 prompted the C&O and Lima to consider a more modern articulated design. Design engineers at Lima argued that expanding the 4-wheeled trailing truck design to a 6-wheel design would permit an even larger firebox, leading to more steaming capability and, by extension, power. Thus was born the 2-6-6-6 wheel arrangement.[1]
Having been sold on the Superpower philosophy through its experience with the T-1, the C&O went on to order 60 of the 2-6-6-6 type locomotives, which they designated the H-8, in 5 batches. The first 4 orders encompassed the first 45 locomotives and were delivered between 1941 and 1944, with the final order for 15 locomotives arriving in 1948. Cost per locomotive varied between individual orders, with the first order coming in around $230,600 per unit and the final order costing the C&O $392,500 per unit. Purchased with the intention of replacing the older H-7s on the New River and Alleghany subdivisions, the class received the nickname of "Allegheny".[1]
Once on property, the H-8s were put to use on the railroad's heavy coal trains on both the flatlands of Ohio, supplementing the T-1s, and in the mountains of Virginia and West Virginia, replacing the H-7s which were then relegated to pusher service. Other assignments over the years included manifest freight and the occasional troop or passenger train. With the advent of dieselization in the early 1950s, retirement of the class started in 1952 and ran until the last fire was dropped in 1956.[1]
Design and performance
The H-8s were intended to be the ultimate expression of the Superpower concept from Lima. Utilizing the 6-wheel trailing truck design permitted the firebox of the locomotive to be longer and deeper, promoting enhanced coal combustion. The firebox was 180in (4.6m) in length, and was supplemented by a 118in (3.0m) combustion chamber. The boiler was designed to be the maximum possible size that could fit within C&O clearance envelopes. It sported an outside diameter of 109in (2.8m), 2in (51mm) wider than the Union Pacific Big Boy, carried 23ft (7.0m) tubes and flues, one foot longer than Big Boy, and was designed with a maximum operating pressure of 265psi (1.83MPa) in mind. In practice, the first safety valve was set at 260psi (1.8MPa). This, coupled with two sets of 22.5in (570mm) diameter by 33in (840mm) stroke cylinders and 67-inch drive wheels yielded 110,200lbf (490,000N) of starting tractive effort, calculated at 85% efficiency.
During test runs, the class was shown to exert up to 119,500lbs of starting tractive effort with drivers worn to 65.5in (1,660mm) inches. The 6-wheel trailing truck was designed to accommodate a booster engine which would have increased starting tractive effort by an additional 15,000lbf (67,000N), but the 160-car limit on trains on the C&O made the application of a booster to the H-8 unnecessary, and so the locomotives were never equipped. Peak horsepower output occurred between 40 and 50mph (64 and 80km/h), with dynamometer car readings ranging from 6,500 to 7,500hp (4.8 to 5.6MW). At this output, the locomotive could consume 7 to 8 short tons (6.4 to 7.3t; 6.3 to 7.1 long tons) of coal and 12,000 to 14,000USgal (10,000 to 11,700impgal; 45,000 to 53,000L) gallons of water per hour.[2]
Coal was carried to and distributed within the firebox via a Standard Stoker Company type MB automatic stoker, capable of supplying slightly over 12+1⁄2 short tons (25,000lb) per hour. Water supply to the boiler was furnished by either the Nathan type 4000C Automatic Restarting injector, sized for 13,000 gallons per hour,[3] on the engineer's side, or a Worthington type SA exhaust steam feedwater system. Locomotives 1600-1644 came equipped with the 6 1/2-SA, sized for 14,400USgal (12,000impgal; 55,000L) per hour, while 1645-1659 were fitted with the 7-SA, sized for 16,200USgal (13,500impgal; 61,000L) per hour. The locomotives sported the latest developments in steam technology, and came equipped with front-end multiple valve throttles, type E superheaters, schedule 8-ET brakes, low water alarms, continuous blowdown, automatic lubricators, roller bearings on all axles, etc. The whistle was blown by actuating a Viloco air-operated valve through a button mounted next to the independent brake valve. Baker valve gear controlled the admission of steam into the cylinders. The final batch of locomotives, 1645-1659, featured over-fire air jets in the firebox.
The H-8s also had the heaviest axle load of any steam locomotive, with 86,700lb (43.4 short tons; 39.3t) on the lead drive axle.[4] According to the engine profiles from C&O the earliest locomotives weighed in at 771,300lb (385.7 short tons; 349.9t) in working order, although there are claims of engine weights as high as 778,000lb (389 short tons; 353t), which if true would make them heavier than the second series of Big Boys.[1] However subsequent re-weighs of early-production H-8s, performed under scrutiny by the builder and the railroad, found them to be less than the 772,250lb (386.12 short tons; 350.29t) of the 4884-2s.[5][6] This unusually high weight led to adhesion factors exceeding 4.5, which meant that the locomotives had a good grip on the rails and were unlikely to slip in regular service.
The tenders were equally unique. To ensure the locomotive would fit on the largest turntables on the C&O, but still carry enough fuel and water to make division points on the railroad, the tenders were made as short and as tall as possible. This resulted in the use of a 6-wheel truck underneath the 25-ton coal bunker in combination with an 8-wheel truck underneath the 25,000USgal (21,000impgal; 95,000L) water cistern. The tenders came in two classes. Class 25-RA tenders came equipped with Commonwealth trucks, weighed 437,600lb (218.8 short tons; 198.5t) fully loaded, and were only used on 1607-1609. The remaining balance of locomotives were delivered with class 25-RB tenders which came with Buckeye trucks and weighed either 426,100lb (213.1 short tons; 193.3t) (1600-1606, 1610-1644), or 431,710lb (215.86 short tons; 195.82t) (1645-1659) fully loaded.
Operation
Arriving just in time for the US entry into World War II, the locomotives were quickly assigned to power loaded coal trains over the 13-mile, 0.57% eastward climb from just east of Ronceverte, West Virginia to Alleghany, Virginia. 11,500-ton, 140-car loaded coal trains left Hinton, WV with two H-8s, one at the front and the other shoving from the rear, and typically made the run between Hinton and Alleghany in just under two hours, twice as fast as the H-7s they were replacing. These trains ran at a brisk 45mph on the comparatively level track out of Hinton to Ronceverte before falling to 20mph on the ruling grade to the summit.[7] East of Clifton Forge, Virginia, trains were turned over to 2-8-4 K-4s or 2-8-2 K-3 Mikados for the mostly downhill run to Richmond, VA. Running unassisted, H-8s could handle 6,500 tons of merchandise freight in this direction. Returning west from Clifton Forge, the ruling grade was 1.14% and the H-8s were rated for 2,950 tons of empty coal hoppers and manifest freight unassisted.[1]
The H-8s also handled coal trains and time freights from West Virginia to Columbus and Toledo, Ohio alongside the older T-1s. Here, the ruling grade was a slightly stiffer, but much shorter one-and-a-quarter mile of 0.7% trackage west through Limeville, Kentucky leading up to the bridge over the Ohio River, and the H-8s were rated for 13,500 tons (160-cars) unassisted. It was over this division that dynamometer car testing yielded the over-7,000 drawbar horsepower readings. The C&O operating department was rather conservative, placing a 160-car limit on train lengths across the railroad due to yard and siding track length and to prevent unwanted slack action during braking from snapping couplers and breaking trains apart. Were it not for this 160-car limit, the H-8s could have easily handled trains approaching 200 cars and 17,000 tons unassisted over this division, save for the helper districts at Limeville, KY and on the 15-mile, up-to-0.5% grade of Powell Hill just north of Columbus, OH.[1]
23 H-8s were equipped with steam piping for heating passenger trains, and did occasionally power passenger or troop trains. Their comparatively "tall" 67 inch drivers permitted speeds as high as 70mph on these runs, while their increased tractive effort allowed them to run unassisted on trains with 12 or more cars that would otherwise have been double-headed, and still make good time over the division. H-8 powered military trains (troop, hospital, or prisoner) sometimes ran as long as 20-40 cars (1500-3000 tons).[1]
No. 1642 boiler explosion
On June 9, 1953, No. 1642 suffered a crown sheet failure and subsequent boiler explosion due to a prolonged low water condition at Hinton, WV. The crew members were killed.[3] The locomotive was not rebuilt, as the class was undergoing retirement by then.
Preservation
Two Alleghenies have been preserved:
No. 1601 was retired in 1956 and donated to the Henry Ford Museum in Dearborn, Michigan where it has been on display indoors since. No. 1646 was originally earmarked for this purpose, but was replaced by the 1601 owing to 1646 still being on the reserve roster around the time of the donation.
No. 1604 was initially sent to C&O's scrap lines behind their diesel shops at Russell, Kentucky upon retirement. It was then donated to the Virginia Museum of Transportation in Roanoke in 1969 where it was displayed next to Norfolk and Western 1218. On November 4, 1985, it was partially damaged by a flood, which washed away the ground under it and nearly turned the locomotive over. In 1987, parent company Norfolk Southern did a cosmetic overhaul on it at their Roanoke Shops before it was sent to Baltimore to be displayed as the centerpiece of the then Mount Clare Junction shopping center which was adjacent to the B&O Railroad Museum. In 1989, the shopping center donated it to the museum, where it presently resides. Its cab has been restored by museum volunteers.[8]
Gallery
C&O 1601 on display at The Henry Ford Museum in Dearborn, Michigan.
C&O 1604 on display at B&O Railroad Museum in Baltimore, Maryland.
The Shay locomotive is a geared steam locomotive that originated and was primarily used in North America. The locomotives were built to the patents of Ephraim Shay, who has been credited with the popularization of the concept of a geared steam locomotive. Although the design of Ephraim Shay's early locomotives differed from later ones, there is a clear line of development that joins all Shays. Shay locomotives were especially suited to logging, mining and industrial operations and could operate successfully on steep or poor quality track.
A Mallet locomotive is a type of compound articulated steam locomotive, invented by the Swiss engineer Anatole Mallet (1837–1919).
The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962.
Under the Whyte notation for the classification of steam locomotives, a 2-10-4 locomotive has two leading wheels on one axle, usually in a Bissel truck, ten coupled driving wheels on five axles, and four trailing wheels on two axles, usually in a bogie. These were referred to as the Texas type in most of the United States, the Colorado type on the Burlington Route, and the Selkirk type in Canada.
A 2-8-8-4 steam locomotive, under the Whyte notation, has two leading wheels, two sets of eight driving wheels, and a four-wheel trailing truck. The type was generally named the Yellowstone, a name given it by the first owner, the Northern Pacific Railway, whose lines ran near Yellowstone National Park. Seventy-two Yellowstone-type locomotives were built for four U.S. railroads.
Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.
Lima Locomotive Works (LLW) was an American firm that manufactured railroad locomotives from the 1870s through the 1950s. The company's name is derived from the location of its main manufacturing plant in Lima, Ohio. The shops were located between the Erie Railroad main line, the Baltimore & Ohio's Cincinnati-Toledo main line and the Nickel Plate Road main line and shops.
Under the Whyte notation, a 2-8-4 is a steam locomotive that has two unpowered leading wheels, followed by eight coupled and powered driving wheels, and four trailing wheels. This locomotive type is most often referred to as a Berkshire, though the Chesapeake and Ohio Railway used the name Kanawha for their 2-8-4s. In Europe, this wheel arrangement was mostly seen in mainline passenger express locomotives and, in certain countries, in tank locomotives.
In the Whyte notation for the classification of steam locomotive wheel arrangement, a 2-6-6-4 is a locomotive with a two-wheel leading truck, two sets of six driving wheels, and a four-wheel trailing truck. All 2-6-6-4s are simple articulated locomotives.
Under the Whyte notation for the classification of steam locomotives by wheel arrangement, a 2-6-6-2 is a locomotive with one pair of unpowered leading wheels, followed by two sets of three pairs of powered driving wheels and one pair of trailing wheels. The wheel arrangement was principally used on Mallet-type articulated locomotives, although some tank locomotive examples were also built. A Garratt locomotive or Golwé locomotive with the same wheel arrangement is designated 2-6-0+0-6-2 since both engine units are pivoting.
The 2-6-6-6 is an articulated locomotive type with two leading wheels, two sets of six driving wheels and six trailing wheels. Only two classes of the 2-6-6-6 type were built. One was the "Allegheny" class, built by the Lima Locomotive Works. The name comes from the locomotive's first service with the Chesapeake and Ohio Railway beginning in 1941, where it was used to haul loaded coal trains over the Allegheny Mountains. The other was the "Blue Ridge" class for the Virginian Railway. These were some of the most powerful reciprocating steam locomotives ever built, at 7,500 hp, and one of the heaviest at 386 tons for the locomotive itself plus 215 tons for the loaded tender.
Chesapeake and Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the primary purpose of hauling long, heavy, high speed express passenger trains for the Chesapeake & Ohio Railway such as the George Washington and the Fast Flying Virginian.
The Virginia Museum of Transportation (VMT) is a museum in Downtown Roanoke, Virginia, that is devoted to the topic of transportation.
The Chesapeake & Ohio Railway No. 1308 is an articulated 2-6-6-2 "Mallet" type steam locomotive built by Baldwin Locomotive Works in 1949. It was the next to the last Class 1 mainline locomotive built by Baldwin, closing out more than 100 years of production, a total of more than 70,000 locomotives. Its other surviving sister locomotive, No. 1309, has been restored to operation at the Western Maryland Scenic Railroad in Cumberland, Maryland.
Chesapeake and Ohio Railway 2716 is a class "K-4" 2-8-4 "Kanawha" (Berkshire) type steam locomotive built in 1943 by the American Locomotive Company (ALCO) for the Chesapeake and Ohio Railway (C&O). While most railroads referred to these 2-8-4 type locomotives as Berkshires, the C&O referred to them as Kanawhas after the Kanawha River, which flows through West Virginia. Used as a dual service locomotive, No. 2716 and its classmates served the C&O in a variety of duties until being retired from revenue service in 1956.
The Louisville and Nashville M-1 was a class of forty-two 2-8-4 steam locomotives built during and after World War II as dual-service locomotives. They were nicknamed "Big Emmas" by crews and were built in three batches between 1942 and 1949.
The Chesapeake and Ohio Greenbrier was a class of 12 4-8-4 "Greenbrier" type steam locomotives built by the Lima Locomotive Works between 1935 and 1948 and operated by the C&O. Like a handful of railroads, the C&O didn't name their 4-8-4s "Northerns", and instead went with the name "Greenbrier" after the Greenbrier Hotel in White Sulphur Springs, West Virginia, a major resort on the C&O mainline.
The Chesapeake and Ohio T-1 was a class of forty 2-10-4 steam locomotives built by the Lima Locomotive Works in Lima, Ohio in 1930 and operated until the early 1950s.
Canadian Pacific 1286 is a preserved G5d class 4-6-2 "Pacific" type steam locomotive built in 1948 by the Canadian Locomotive Company. It was sold to George Hart, who used it to pull excursion trains in the 1960s. It was eventually sold again to Jack Showalter, who operated it on his Allegany Central Railroad from the early 1970s to the late 1990s. As of 2023, No. 1286 is stored under private ownership at the Prairie Dog Central Railway.
The Norfolk and Western Y3 Class was a class of 2-8-8-2 "Mallet" articulated steam locomotives with a total of 80 locomotives built for the Norfolk and Western Railway between 1919 and 1923.
References
1 2 3 4 5 6 7 8 Huddleston, Eugene; Dixon, Thomas (1984). The Allegheny: Lima's Finest. Hundman Publishing.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
