Cotton paper, also known as rag paper or rag stock paper, is made using cotton linters (fine fibers which stick to the cotton seeds after processing) or cotton from used cloth (rags) as the primary material. Prior to the mid-19th century, cotton paper was the main form of paper produced, with pulp paper replacing cotton paper as the main paper material during the 19th century. Although pulp paper was cheaper to produce, its quality and durability is significantly lower. Although pulp-paper quality improved significantly over the 20th century, cotton paper continues to be more durable, and consequently important documents are often printed on cotton paper. Different grades of cotton paper can be produced.
High-quality cotton fiber paper is known to last hundreds of years without appreciable fading, discoloration, or deterioration, [1] so it is often used for important documents, such as the archival copies of dissertations or theses. As a rule of thumb, for each percentage point of cotton fiber, a user may expect one year of resisting deterioration by use (the handling to which paper may be subjected).[ citation needed ] Legal document paper typically contains 25% cotton. Cotton paper will produce a better printout than copy paper because it can more readily absorb ink or toner.[ citation needed ]
Cotton paper is typically graded as 25%, 50%, or 100% cotton. Usually it can be checked by holding the cotton paper up to the light and looking just below the watermark for a number. 100% cotton paper may contain small amounts of acids, and should be tested or certified before use for archival documents.
Second-cut cotton linters have a normal average fiber length of 1.45 μm, and have similar properties as a short softwood pulp. [2]
Cotton bond paper can be found at most stores that sell stationery and other office products. Some cotton paper contains a watermark. It is used for banknotes in a number of countries. These banknotes are typically made from 100% cotton paper, but can also be made with a mixture of 75% or less flax. [3] Other materials may also be used and still be known as currency paper. Higher quality art papers are often made from cotton.
It has found extensive use as a printed circuit board substrate when mixed with epoxy resins and classified into CEM 1, CEM 2 etc.[ citation needed ]
Cotton was first used with a mixture of silk to make paper called Carta Bombycina. In the 1800s, fiber crops such as flax fibers or cotton from used cloths (rags) were the primary material source for paper. Beginning in the mid-19th century, wood pulp supplanted cloth; despite its lower quality, wood pulp was more readily available than cloth rags as global paper production increased. [4] By the turn of the 20th century, most paper was made from wood pulp. Wood pulp paper durability would improve over the 20th century as bookbinders became aware of pulp paper acidity and adopted practices to counteract it, but cotton is still used for specialty papers intended for long-term preservation. As cotton rags now often contain synthetic fibers, papermakers have turned to second-cut cotton linters as raw material sources for making pulp for cotton papers. [5]
Linen is a textile made from the fibers of the flax plant.
Papermaking is the manufacture of paper and cardboard, which are used widely for printing, writing, and packaging, among many other purposes. Today almost all paper is made using industrial machinery, while handmade paper survives as a specialized craft and a medium for artistic expression.
Pulp is a fibrous lignocellulosic material prepared by chemically, semi-chemically or mechanically producing cellulosic fibers from wood, fiber crops, waste paper, or rags. Mixed with water and other chemicals or plant-based additives, pulp is the major raw material used in papermaking and the industrial production of other paper products.
Kenaf [etymology: Persian], Hibiscus cannabinus, is a plant in the family Malvaceae also called Deccan hemp and Java jute. Hibiscus cannabinus is in the genus Hibiscus and is native to Africa, though its exact origin is unknown. The name also applies to the fibre obtained from this plant. Kenaf is one of the allied fibres of jute and shows similar characteristics.
Fiber crops are field crops grown for their fibers, which are traditionally used to make paper, cloth, or rope.
Acid-free paper is paper that, if infused in water, yields a neutral or basic pH. It can be made from any cellulose fiber as long as the active acid pulp is eliminated during processing. It is also lignin- and sulfur-free. Acid-free paper addresses the problem of preserving documents and preserving artwork for long periods.
A manila folder is a file folder designed to contain documents, often within a filing cabinet. It is generally formed by folding a large sheet of stiff card in half. Though traditionally buff, sometimes other colors are used to differentiate categories of files.
Manila paper is a relatively inexpensive type of paper, generally made through a less-refined process than other types of paper, and is typically made from semi-bleached wood fibers.
The manufacture of textiles is one of the oldest of human technologies. To make textiles, the first requirement is a source of fiber from which a yarn can be made, primarily by spinning. The yarn is processed by knitting or weaving, which turns it into cloth. The machine used for weaving is the loom. For decoration, the process of coloring yarn or the finished material is dyeing. For more information of the various steps, see textile manufacturing.
From the late 19th century until the middle of the 20th century, drafting linen, also known as drafting cloth, was commonly used as an alternative to wood-pulp and rag papers in creating technical drawings. Its major benefits were considerable strength, especially in erasing and redrawing, durability in handling, and translucency for making multiple reprographic prints. Manufactured as an undyed muslin woven fabric, typically using cotton or linen fiber, the textile was highly starched and then calendered to create a smooth surface for precise ink and graphite lines. Although drafting linen was most typically used in creating original drawings, it was occasionally used as the underlying support for blueprints and other similar reprographic processes. Drafting linen largely fell out of favor after the development of drafting film — varying in chemical composition from cellulose acetate to polyester—in the 1950s.
A writing material, also called a writing medium, is a surface that can be written on with suitable instruments, or used for symbolic or representational drawings. Building materials on which writings or drawings are produced are not included. The gross characterization of writing materials is by the material constituting the writing surface and the number, size, usage, and storage configuration of multiple surfaces into a single object. Writing materials are often paired with specific types of writing instruments. Other important attributes of writing material are its reusability, permanence, and resistance to fraudulent misuse.
Tree-free paper, also known as no tree paper, offers an alternative to traditional wood-pulp paper due to its unique raw material composition. This type of paper is considered more eco-friendly especially when evaluating its entire life cycle.
Northern bleached softwood kraft (NBSK) is the paper industry's benchmark grade of pulp. Market NBSK is produced mainly in Canada and the Nordic countries. Some NBSK is also produced in north-western United States and in Russia. NBSK futures are traded on the Chicago Mercantile Exchange.
Paper is a thin nonwoven material traditionally made from a combination of milled plant and textile fibres. The first paper-like plant-based writing sheet was papyrus in Egypt, but the first true papermaking process was documented in China during the Eastern Han period, traditionally attributed to the court official Cai Lun. This plant-puree conglomerate produced by pulp mills and paper mills was used for writing, drawing, and money. During the 8th century, Chinese paper making spread to the Islamic world, replacing papyrus. By the 11th century, papermaking was brought to Europe, where it replaced animal-skin-based parchment and wood panels. By the 13th century, papermaking was refined with paper mills using waterwheels in Spain. Later improvements to the papermaking process came in 19th century Europe with the invention of wood-based papers.
Bambusa spinosa, also known as B. blumeana, spiny bamboo or thorny bamboo, although in this respect it may be confused with Bambusa bambos, is a species of clumping bamboo occurring in Tropical Asia.
Wood-free paper is paper created exclusively from chemical pulp rather than mechanical pulp. Chemical pulp is normally made from pulpwood, but is not considered wood as most of the lignin is removed and separated from the cellulose fibers during processing, whereas mechanical pulp retains most of its wood components and can therefore still be described as wood. Wood-free paper is not as susceptible to yellowing as paper containing mechanical pulp. Wood-free paper offers several environmental and economic benefits, including reduced deforestation, decreased energy consumption, and improved waste management. The term Wood-free paper can be rather misleading or confusing for someone unfamiliar with the papermaking process because paper is normally made from wood pulp derived from trees and shrubs.
Fluff pulp is a type of chemical pulp made from long fibre softwoods. Important parameters for fluff pulp are bulk and water absorbency.
Southern bleached softwood kraft (SBSK) is a wood pulp mainly produced in the southern USA. The main raw materials are slash pine, longleaf pine, shortleaf pine, loblolly pine and virginia pine.
Mercerised pulp is a bleached pulp that is treated with hot diluted alkali to get extra high bulk and high porosity. The pulp feels and looks similar to a cotton ball.
Hemp paper is a paper variety consisting exclusively or to a large extent from pulp obtained from fibers of industrial hemp. The products are mainly specialty papers such as cigarette paper, banknotes and technical filter papers. Compared to wood pulp, hemp pulp offers a four to five times longer fibre, a significantly lower lignin fraction as well as a higher tear resistance and tensile strength. Because the paper industry's processes have been optimized for wood as the feedstock, production costs currently are much higher than for paper from wood.