The Daihatsu Fellow Max is a small Japanese automobile in the Kei car class. Originally introduced as the Daihatsu Fellow, the name was partially retained for its successor, the Max Cuore (1977), and then revived in 2000 for the Daihatsu Max.
The Daihatsu Fellow Max is a small Japanese automobile in the Kei car class. Originally introduced as the Daihatsu Fellow, the name was partially retained for its successor, the Max Cuore (1977), and then revived in 2000 for the Daihatsu Max.
| Daihatsu Fellow | |
|---|---|
 1969–1970 Daihatsu Fellow Custom sedan (front) | |
| Overview | |
| Manufacturer | Daihatsu |
| Production | 1966–1970 |
| Assembly | Ikeda, Osaka, Japan |
| Body and chassis | |
| Body style | 2-door sedan 2-door pickup truck 3-door van |
| Layout | Front engine, rear-wheel-drive |
| Powertrain | |
| Engine | 356 cc ZM water-cooled 2-stroke I2 |
| Transmission | 4-speed manual |
| Dimensions | |
| Wheelbase | 1,990 mm (78.3 in) |
| Length | 2,990 mm (117.7 in) |
| Width | 1,285 mm (50.6 in) |
| Height | 1,350 mm (53.1 in) |
| Curb weight | 495 kg (1,091 lb) |
On 9 November 1966, Daihatsu introduced the Fellow, also known as Daihatsu 360 in export markets. Originally only available in DeLuxe and Super DeLuxe equipment levels, a Standard version joined in February 1967. Also available with a wagon body (Fellow Van), as a mini-pickup truck and as a panel van from June 1967, the L37 was conventionally built with a front-mounted engine and rear wheel drive. It used a 23 PS iteration of the 356 cc, water-cooled two-cylinder two-stroke "ZM" engine already seen in the Hijet and a four-speed manual transmission. [1] The self-lubricating ("Oil-Matic") little engine weighed only 58 kg (128 lb). [2] The Fellow was the first Japanese car to be equipped with rectangular headlights.
As a result of Honda's 31 PS N360 being introduced early in 1967, a Kei-car horsepower war broke out, with Honda, Subaru, Suzuki, Mazda, and Mitsubishi contributing competitors. Daihatsu's response, the Fellow SS, was presented at the 1967 Tokyo Motor Show in October but did not go on sale until June the next year. [3] A Le Mans-style sportscar prototype, the P-5 with the SS engine was shown alongside. The 32 PS "SS" could do the 400 meter sprint in 21.2 seconds and had a 115 km/h (71 mph) top speed. [4]
The Fellow also received a slight facelift in October 1967, with a new dashboard and steering wheel most noticeable. Another minor change came in January 1969, with a fixed driver's side headrest and seatbelts installed because of new safety regulations. [3] In July, along with what was literally a facelift (the front bumper was now mounted higher), the lesser engine's output increased to 26 PS and a comparatively luxurious "Custom" version was added at the top of the lineup. [5] The size of the taillights also increased somewhat. An electric version called the Daihatsu Fellow Van EV went on sale in September 1969. [6]
| Daihatsu Fellow L37 Data | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Version | Engine | Power | Torque | Dimensions (mm) | Weight (kg) | Top speed (km/h) | Gears | Production | Note | ||||||||
| PS | kW | at rpm | kgm | Nm | at rpm | length | width | height | wb | begin | end | ||||||
| Std, DX, SDX [7] | Water-cooled 356 cc ZM two-cycle two-cylinder | 23 | 17 | 5,000 | 3.5 | 34.3 | 4,000 | 2,990 | 1,285 | 1,350 | 1,990 | 515 | 100 | 4MT | 66.11 | 69.07 | Std. from 67.02 |
| Std, DX, SDX, Custom [8] | 26 | 19 | 5,500 | 3.5 | 34.3 | 4,500 | 495 | 110 | 69.07 | 70.04 | facelifted version | ||||||
| SS [3] | 32 | 23.5 | 6,500 | 3.8 | 37.3 | 5,000 | 115 [9] | 68.06 | 70.04 | ||||||||
| Van Std, SDX [10] (Pickup) | 23 | 17 | 5,000 | 3.5 | 34.3 | 4,000 | 2,995 | 1,295 | 1,430 (1,420) | 1,940 | 545 (500) | 85 [11] | 67.06 | 69.07 | 300 kg (350) payload | ||
| Van Std, SDX (Pickup) | 26 | 19 | 5,500 | 3.5 | 34.3 | 4,500 | n/a | 69.07 | 70.07 | ||||||||
| Daihatsu Fellow Buggy | |
|---|---|
 1970 Daihatsu Fellow Buggy (L37PB) | |
| Overview | |
| Manufacturer | Daihatsu |
| Production | 1970 |
| Assembly | Ikeda, Osaka, Japan |
| Body and chassis | |
| Body style | 2-seat beach buggy |
| Layout | Front engine, rear-wheel-drive |
| Related | Daihatsu Hijet S37 |
| Powertrain | |
| Engine | 356 cc ZM 2-stroke I2 |
| Transmission | 4-speed manual |
| Dimensions | |
| Wheelbase | 1,940 mm (76.4 in) |
| Length | 2,995 mm (117.9 in) |
| Width | 1,290 mm (50.8 in) |
| Height | 1,400 mm (55.1 in) |
| Curb weight | 440 kg (970 lb) |
A beach buggy version was introduced simultaneously with the other three body styles. While highly prized by collectors today, the Buggy only sold about 100 examples and was only available for a single model year. The 440 kg Fellow Buggy was not actually a "real" Fellow, as it was built on a Hijet S37 chassis, with fibre-reinforced plastic bodywork. [12] The Buggy also used the Hijet's lower powered (26 PS or 19 kW) engine, providing a top speed of 95 km/h (59 mph). [13]
| Daihatsu Fellow Max | |
|---|---|
 1973–1975 Daihatsu Fellow Max HT Coupé (L38GL) | |
| Overview | |
| Manufacturer | Daihatsu |
| Production | 1970–1976 |
| Assembly | Ikeda, Osaka, Japan |
| Body and chassis | |
| Body style | 2-door saloon 4-door saloon (from 1972) 2-door coupé (from 1971) |
| Layout | Front engine, front-wheel-drive |
| Powertrain | |
| Engine | 356 cc ZM 2-stroke I2 |
| Transmission | 4-speed manual |
| Dimensions | |
| Wheelbase | 2,090 mm (82.3 in) |
| Length | 2,995 mm (117.9 in) |
| Width | 1,295 mm (51.0 in) |
| Height | 1,290 mm (50.8 in) |
| Curb weight | 510 kg (1,124 lb) |
| Chronology | |
| Predecessor | Daihatsu Fellow |
| Successor | Daihatsu Max Cuore Daihatsu Leeza (Hardtop) |
In April 1970, the front-wheel drive L38 Daihatsu Fellow Max was introduced to replace the rear-wheel drive Fellow. Originally only available as a two-door sedan and three-door van (L38V), a hardtop coupé with a lower roofline and a somewhat baroque front-end treatment was added in August 1971 (L38GL). SL and GXL Hardtops received standard front disc brakes. In October 1972 a four-door version (L38F) appeared; it was the only four-door Kei car at the time of its introduction. Dimensions were 2,995 mm × 1,295 mm as dictated by the Kei car regulations, although the wheelbase was stretched by 100 mm to 2,090 mm. The engine was a 360 cc two-cylinder two-stroke ("ZM4"), offering 33 PS (24 kW) at the time of introduction. [14] In July 1970 the SS version appeared, featuring a twin-carb, 40 PS (SAE) version of the ZM engine (ZM5) - a specific output of over 112 PS per litre. Top speed was 120 km/h, compared to 115 km/h (75 and 71 mph) for the lesser versions. This highly tuned engine had an 11:1 compression ratio, versus 10:1 for the ZM4 engine, and required high octane gasoline. With a narrow powerband at the high end of the range, its expansion chambers in the front and rear meant that noise levels were elevated. [15]
In October 1972, for the 1973 model year, engine outputs dropped somewhat, to 31 and 37 PS respectively to lower fuel consumption and meet new, more stringent emissions standards. [16] These engines were called ZM12 and ZM13 respectively. [17]
In export markets, this car was usually sold simply as the "Daihatsu 360". In Australia, where the car went on sale in early 1972 as a two-door sedan, it was called the Max 360X. It was the cheapest new car available in Australia at the time. [18] Unaffected by emissions regulations, it was equipped with the 33 PS version of the engine; in a period road test by Wheels magazine it reached 68 mph (109 km/h) and managed the sprint to 60 mph (97 km/h) in 33.2 seconds. [19] It was also sold as the Daihatsu 360X in New Zealand.
The Fellow Max received a steady stream of facelifts during its existence. It underwent minor changes in March 1971 (new grille, dash modifications), March 1972 (new dash, round headlights and a new bonnet with longitudinal creases), May 1973 (changes to the fenders and new bumpers that fitted into the bodywork, and another new bonnet) and in October 1973 (new safety equipment). In February 1975 the bumpers were modified again, to allow for the fitment of new, larger license plates. The grille and front bumper arrangement was changed yet again. At the same time the interior saw some changes and the powerful twin-carb model was dropped as it wouldn't pass new emissions regulations. From now on, all models were equipped with the 31 PS "ZM12" engine. [20] In May 1976 the car underwent more thorough changes as new Kei car regulations were introduced. This also marked the end of the Hardtop versions, which anyhow had lost relevance once the twin-carb engine was discontinued.
| Daihatsu Fellow Max/Max Cuore | |
|---|---|
 1981 Daihatsu (Max) Cuore four-door | |
| Overview | |
| Manufacturer | Daihatsu |
| Also called | Daihatsu Max 550 Daihatsu Cuore |
| Production | 1976–1980 |
| Assembly | Ikeda, Osaka, Japan |
| Body and chassis | |
| Class | Kei car |
| Body style | 2/4-door sedan 3-door van |
| Layout | Front engine, front-wheel-drive |
| Platform | L40, L45 platforms |
| Powertrain | |
| Engine | 547 cc AB10/30 I2 |
| Transmission | 4-speed manual |
| Dimensions | |
| Wheelbase | 2,090 mm (82.3 in) |
| Length | 3,120–3,165 mm (122.8–124.6 in) |
| Width | 1,305–1,395 mm (51.4–54.9 in) |
| Height | 1,320 mm (52.0 in) |
| Curb weight | 535–565 kg (1,179–1,246 lb) |
| Chronology | |
| Successor | Daihatsu Cuore |
In May 1976, responding to a change in the Kei car regulations, Daihatsu increased the Fellow Max' engine size to 547 cc and gave it a new chassis code (L40/L40V). The name remained, although the "Fellow" portion received less prominence and some marketing material simply referred to the car as the "Max 550". The new "AB10" four-stroke two-cylinder engine replaced the old two-cycle "ZM". This, developed with help from Toyota, was an overhead camshaft design (belt-driven) which also featured balance axles to smoothen the inherently imbalanced two-cylinder design. [21] The AB10 engine was also briefly sold to Suzuki for use in the four-stroke version of their Fronte 7-S. The cleaner four-stroke offered less power than the revvy 360, down to 28 PS (21 kW) at 6,000 rpm. Torque increased somewhat, to 3.9 kg⋅m (38 N⋅m) at a significantly lower 3,500 rpm. [22]
New bumpers meant length and width were up marginally to 3,120 mm (122.8 in) and 1,305 mm (51.4 in). [23] Claimed top speed was 110 km/h (68 mph), somewhat lower than that of the 360. [24] With Honda withdrawing from the Kei passenger car segment, Daihatsu became the only maker to offer a Kei car featuring front-wheel drive. [21] The Van used the front end and front doors from the two-door Max, but with a more square-rigged rear end featuring a split tailgate (divided horizontally) and a folding rear seat which allowed for a flat loading floor.
In July 1977, the name was changed to Max Cuore (chassis code L45, although Vans remained L40V). The new name also heralded a wider body shell (up to 1,395 mm or 54.9 in) which also increased the length to 3160 mm for the sedan [23] and 3165 mm for the wagon. By March, 1979 the car was renamed Daihatsu Cuore (though it still carried discrete "Max" badging), along with a power upgrade to 31 PS (23 kW) at 6000 rpm. [25] Torque increased to 4.2 kg⋅m (41 N⋅m) for the engine, which now featured the DECS (Daihatsu Economical Clean-up System) emissions control system to meet the stricter 1978 (53年) emissions standards. The front grille and emblems were changed, while the seats were improved and new colors (inside and out) became available. [25] The Cuore Van, available in Standard, DeLuxe, and Super DeLuxe grades, now had 29 PS (21 kW) on tap. [26]
In most of Europe, the car was simply called Daihatsu Cuore beginning in 1977, although it retained the "Max" prefix in some markets. Export versions received the same lower-powered engine as the Cuore Van did in Japan. [27] 1980 saw the introduction of the parallel commercial series Daihatsu Mira, while the name "Max" finally disappeared entirely from the Cuore. In Japan, the 1979 Max Cuore was available as Standard (two-door), Deluxe (two or four doors), Custom (four-door), Hi-Custom (two or four doors), and Hi-Custom EX (four-door). The top of the line Hi-Custom EX was new for 1979.
| Daihatsu Max (L950/952/960/962S) | |
|---|---|
 2001 Daihatsu Max | |
| Overview | |
| Manufacturer | Daihatsu |
| Production | November 2001 – December 2005 |
| Assembly | Ikeda, Osaka, Japan |
| Body and chassis | |
| Class | Kei car |
| Body style | 5-door hatchback |
| Layout | Front engine, front-wheel-drive or four-wheel-drive |
| Related | Daihatsu Move (L900) |
| Powertrain | |
| Engine | |
| Transmission | 5-speed manual 4-speed automatic CVT |
| Dimensions | |
| Wheelbase | 2,360 mm (92.9 in) |
| Length | 3,395 mm (133.7 in) |
| Width | 1,305–1,475 mm (51.4–58.1 in) |
| Height | 1,550 mm (61.0 in) |
| Curb weight | 800–870 kg (1,760–1,920 lb) |
| Chronology | |
| Successor | Daihatsu Sonica |
The Daihatsu Max was a partial revival of the Daihatsu Fellow Max nameplate, appearing on October 10, 2001. Sales of the Daihatsu Max 5-door wagon began on November 1, using the same technical data as the second generation Move, though 10 mm lower. [28] In 2006, the Max was discontinued and replaced by the Sonica.
Kei car is the smallest category of Japanese, expressway-legal motor vehicles. The term 'Kei' is a shortening of kei-jidōsha,, which translates to English as "light automobile".
The Mazda Carol is a kei car manufactured by Mazda from 1962 until 1970. The Carol name was revived again with Mazda's 1989 re-entry into the kei car class with the Autozam brand. Since 1989, the Carol has been a rebadged model manufactured by Suzuki for Mazda, based on the Japanese Suzuki Alto. The first two generations of the modern era Carols received unique bodywork, but since late 1998 the nameplate has been strictly a badging exercise.
The Mazda Chantez is a two-door kei car that was introduced by Mazda in July 1972. The Chantez had a longer wheelbase at 2,200 mm (86.6 in) than most of its competitors and featured the powerful two-stroke "AA" engine also seen in the Porter. With 35 PS, top speed was 115 km/h (71 mph) and the 400 m (0.2 mi) sprint was dispatched in a sprightly 20.6 seconds. In more recent testing of a 1972 GF II, 0–100 km/h came up in 35.8 seconds. The engine was installed longitudinally in the front of the vehicle powering the rear wheels, and the spare tire was installed next to the engine on the right side.
The Subaru Rex, also known as Ace, Viki, Sherpa, 500/600/700, Mini Jumbo, Mini Subaru or M60/M70/M80 in various export markets, is a kei class automobile produced from 1972 to 1992 mainly for sale in Japan by Subaru, although it was also sold in Europe, South America, Australia and the Caribbean. The Rex superseded the R-2 as Subaru's kei car, and has been available in commercial use versions as well as in a passenger car version. It underwent major changes in 1976, in fall 1981, and again in late 1986. The second generation Rex (1981–1986) also formed the basis for the larger Subaru Justy.
The Daihatsu Mira is a kei car and city car built by Japanese car maker Daihatsu. It has a variety of options and chassis variations, with the latest variant having four models: Mira, Mira AVY, Mira Gino, and Mira VAN. The Mira is the latest successor to the line of cars begun with the Daihatsu Fellow of 1966, and was originally introduced as the commercial version of the Cuore. Outside of Japan, the Mira has also been offered with larger 850 or 1000-cc engines. In Australia, the two-seater version was marketed as the Daihatsu Handivan and later as the Daihatsu Handi. The term mira is Latin meaning "goal" or "purpose".
The Daihatsu Compagno is an automobile which was produced by Daihatsu in Japan from 1963 to 1970. The name comes from the Italian word for "partner." The Compagno was designed to be offered in multiple bodystyles, and was introduced prior to the acquisition of Daihatsu by Toyota in 1967. The Compagno was available as a two-door sedan, four-door sedan, two-door pickup truck, a three-door delivery van and a convertible. The first Compagno prototype was shown at the 1961 Tokyo Motor Show and was of an appearance reminiscent of the Fiat 1800/2100. This was not a very well balanced design and Vignale's production version ended up looking quite different. The Compagno used a ladder-type chassis instead of the more modern monocoque style, with torsion bar wishbone suspension at the front and semi-elliptical leaf springs for the rear axle. The Compagno is also the first Daihatsu car to use the famous "D" logo.
The Daihatsu Charmant is a subcompact sedan built by Daihatsu of Japan, based on the Toyota Corolla. It was succeeded by the Daihatsu Applause two years after Charmant production ended. The Charmant was heavily based on the E20 Toyota Corolla; model changes paralleled those of the Corolla. All Charmants were fitted with Toyota inline-four engines, ranging from 1.2 to 1.6 litres. The word charmant is French for "charming."
The Mitsubishi Minica is a model series of kei cars, produced by Mitsubishi Motors Corp. (MMC) over five generations, from 1962 to 2011, mainly for the Japanese domestic market.
The Suzuki Fronte is an automobile introduced in March 1962 as a sedan version of the Suzulight Van. The nameplate remained in use for Suzuki's Kei car sedans as well as some commercial-use derivatives until it was replaced by the Alto in September 1988.
The Daihatsu Hijet is a cab over microvan and kei truck produced and sold by the Japanese automaker Daihatsu since 1960. Despite the similarities between the Hijet name and Toyota's naming scheme for its trucks and vans, the name "Hijet" has been in use for Daihatsu's kei trucks and microvans since 1960, over two decades before Toyota took control. "Hijet", when transliterated into Japanese, is very similar to "Midget", one of Daihatsu's other mini-trucks. According to Daihatsu, the name "Hijet" was created to imply that the vehicle offers higher performance than the Midget. The Hijet competes in Japan with the Honda Acty, Mitsubishi Minicab, Nissan Clipper, Subaru Sambar and Suzuki Carry.
The Honda Life is an automobile nameplate that was used on various kei car/city cars produced by Honda: passenger cars, microvans, and kei trucks. The first series of the nameplate was built between 1971 and 1974, with the nameplate revived in 1997 and used until 2014. The Japanese-market Life has rarely been marketed outside Japan.
The Isuzu Florian is an intermediate class car manufactured by Isuzu Motors Ltd. in Japan from November 1967 until 1983. The Florian's body remained essentially the same through its unusually long life cycle, being afforded only two moderate facelifts. The Isuzu Florian was originally presented as the Ghia Isuzu 117 Sedan at the 1966 Tokyo Motor Show and shared its complete chassis with the closely related Isuzu 117 Coupé. Originally available only with a 1.6 liter gasoline inline-four engine producing 84 PS (62 kW) at 5200 rpm, a 1.8 liter version was later added as was a diesel option, first seen in 1977.
The Subaru Sambar is a cabover truck and microvan manufactured and marketed by Subaru as Japan's second truck compliant with the country's strict Keitora (軽トラ) or Kei vehicle tax class, after the Kurogane Baby. Introduced in 1961 in microvan and Kei pickup configurations, the Sambar remains in production, now in its eighth generation — beginning with the sixth generation as a rebadged Daihatsu Hijet.
The Toyota Publica is a small car manufactured by the Japanese company Toyota from 1961 until 1978. Conceived as a family car to fulfill the requirements of the Japanese Government's "national car concept", it was the smallest Toyota car during that period and was superseded in that role by the Toyota Starlet, which itself started out as a version of the Publica. It was available as a 2-door vehicle only, but in a selection of body styles, ranging from the base sedan through a station wagon, convertible, coupé and even a coupe utility (pickup), which outlived the other models by a decade, and spawned other models, such as the Toyota Sports 800 and the Toyota MiniAce.
The Daihatsu Mira Gino is a kei car/city car with distinctive retro styling made by the Japanese automaker Daihatsu from 1999 to 2009. It is based on the more mainstream Mira and was first introduced to the Japanese market in 1999, with the second generation model following in 2004. The Mira Gino replaced the Mira Classic which is a subvariant of the L500 series Mira. The second generation model was also exported as the Daihatsu Trevis to some markets in Europe such as Germany, the Netherlands, Italy, Gibraltar and France.
The Daihatsu Opti is a kei car produced by Japanese automaker Daihatsu from 1992 to 2002, which replaced the Leeza. It was available with a 658 cc petrol engine and either front- or four-wheel drive, and marketed as a more upmarket variant of the Mira. The name "Opti" refers to both "optimistic" and "optimum".
The Mitsubishi Colt (A20) was one of their first series of passenger cars produced by Shin Mitsubishi Heavy-Industries, Ltd, one of the companies which would become Mitsubishi Motors. Built from 1963 until 1970, they were available in four body styles and on two different wheelbases, with gradually increasing engine displacements 1000, 1100, 1200, and 1500. After a May 1968 facelift, they were marketed as the "New Colt". Along with the smaller, fastback Colts they formed the mainstay of Mitsubishi's passenger car lineup in the 1960s. With the late 1969 introduction of the new, larger Colt Galant, the outmoded Colt-series soon faded away, eventually replaced by the smaller Mitsubishi Lancer as well. The dimensions were kept small so as to provide Japanese buyers the ability to purchase a car that complied with the Japanese Government compact car dimension regulations and to keep the annual road tax obligation affordable.
The TN360 and its successors in the long running TN series is a cab over pickup truck from Honda, which replaced the T360 in November 1967.
The Daihatsu A-series engine is a range of compact two-cylinder internal combustion piston engines, designed by Daihatsu with the aid of their owner Toyota. Petrol-driven, it has cast iron engine blocks and aluminum cylinder heads, which are of a single overhead cam lean burn design with belt-driven camshafts. The head design was called "TGP lean-burn", for "Turbulence Generating Pot". The engine also had twin balancing shafts, which provided smoothness equivalent to that of a traditional four-cylinder engine - although it also cost nearly as much to build.
A subsidiary of Toyota Motor Corporation | |||||||||||||||
| Subsidiaries |
| ||||||||||||||
| Current vehicles |
| ||||||||||||||
| Discontinued models |
| ||||||||||||||
| Concept cars | |||||||||||||||
| Racing cars | |||||||||||||||
| Platforms | |||||||||||||||
| Engines | |||||||||||||||
| Related | |||||||||||||||
