Dallara GP3 cars

Last updated
Dallara GP3/10
T Dillmann.jpg
Category GP3 Series
Constructor Dallara
Successor Dallara GP3/13
Technical specifications [1]
Chassis Sandwich Carbon/aluminium honeycomb structure designed by Dallara
Suspension (front)Double steel wishbones, pushrod operated, twin dampers, helicoidally spring suspension
Suspension (rear)Same as front
Length4,471 mm (176 in)
Width1,885 mm (74 in)
Height1,063 mm (42 in)
Wheelbase 2,780 mm (109 in)
Engine Race-tuned Renault B20F 2.0 L (122 cu in) inline-4 single-turbocharged, 6,500 rpm limited mid-mounted, rear-wheel-drive
Transmission Hewland 6 forward + 1 reverse sequential paddle shift
Power280 hp (209 kW)
Weight630 kg (1,389 lb) (including driver)
Fuel Elf LMS 89.6 MON, 101.6 RON unleaded
Tyres Pirelli P Zero
O.Z. racing wheels
front rims 13” x 10” wide
rear rims 13” x 12.5” wide
Competition history
Notable entrantsAll GP3 Series teams
Notable driversAll GP3 Series drivers
Debut 2010 Catalunya GP3 round
Last event 2012 Monza GP3 round
RacesWins Poles F/Laps
48484848
Constructors' Championships3
Drivers' Championships3

The Dallara GP3 cars were chassis for the GP3 Series as a feeder series for the parent GP2 series where Italian manufacturer Dallara also designs the chassis.

Contents

GP3/10

The Dallara GP3/10 was a first generation car in the series. It debuted in May 2010 at Catalunya and had its final run in September 2012 in Monza. During its run, it claimed championship titles for Esteban Gutiérrez in 2010, Valtteri Bottas in 2011 and finally Mitch Evans in 2012 with ART Grand Prix winning the teams title on all accounts. It also helped 9 drivers successfully graduate into the GP2 parent series. Both Gutiérrez and Bottas made their F1 debuts in the 2013 Formula 1 season with Sauber and Williams respectively.

Each team was allowed to run three separate GP3/10's, and with a total of ten different teams and thirty cars on the grid, it was one of the largest grids in motor-sport making it a rather unstable class of racing. With the chassis to be taken over by the GP3/13 in 2013, the number of cars on track was limited to twenty seven. [2]

GP3/13

Dallara GP3/13
Alex Lynn - Silverstone 2014.jpg
Category GP3 Series
Constructor Dallara
Predecessor Dallara GP3/10
Successor Dallara GP3/16
Technical specifications [3]
Chassis Sandwich Carbon/aluminium honeycomb structure designed by Dallara
Suspension (front)Double steel wishbones, pushrod operated, twin dampers, helicoidally spring suspension
Suspension (rear)same as front
Length4,620 mm (182 in)
Width1,872 mm (74 in)
Height1,043 mm (41 in)
Wheelbase 2,880 mm (113 in)
Engine AER P57 3.4 L (207 cu in) naturally aspirated, rear mid-mounted, rear-wheel-drive
Transmission Hewland 6 forward + 1 reverse sequential paddle shift
Weight630 kg (1,388.9 lb) (including driver)
Fuel Elf LMS 89.6 MON, 101.6 RON unleaded
Lubricants Elf HTX 840
Tyres Pirelli P Zero
O.Z. racing wheels
front rims 13” x 10”
widerear rims 13” x 12.5”
Competition history
Notable entrantsAll GP3 Series teams
Notable driversAll GP3 Series drivers
Debut 2013 Catalunya GP3 round
Last event 2015 Yas Marina GP3 round
RacesWins Poles F/Laps
52525252
Constructors' Championships3
Drivers' Championships3

The Dallara GP3/13 was the second generation in the series. The GP3/13 made its debut at the start of the 2013 season in Barcelona and it was in use for three seasons before being replaced by the Dallara GP3/16.

The 280bhp turbo-charged inline-4 engine that was used in the Dallara GP3/10 between 2010 and 2012 was upgraded to a 400bhp 3.4 litre (207 cu in) naturally-aspirated V6 unit, [4] with initial estimations suggesting that the chassis would be up to three seconds per lap faster than its predecessor, [5] which proved to be accurate during pre-season testing at the Autódromo do Estoril. [6]

GP3/16

Dallara GP3/16
George Russell on 26 August 2017 at Spa-Francorchamps.jpg
Category GP3 Series
Constructor Dallara
Predecessor Dallara GP3/13
Successor Dallara F3 2019
Technical specifications [7]
Chassis Sandwich Carbon/aluminium honeycomb structure
Suspension (front)Double steel wishbones, pushrod operated, twin dampers, helicoidally spring suspension
Suspension (rear)same as front
Length4,620 mm (182 in)
Width1,872 mm (74 in)
Height1,043 mm (41 in)
Wheelbase 2,880 mm (113 in)
Engine Mecachrome V634 3.4 L (207 cu in) V6 95 degree naturally aspirated, rear mid-mounted, rear-wheel-drive
Transmission Hewland 6 forward + 1 reverse sequential paddle shift
Weight661 kg (1,457 lb) (including driver)
Fuel Elf LMS 89.6 MON, 101.6 RON unleaded
Lubricants Elf HTX 840
Tyres Pirelli P Zero (dry) and Cinturato (wet)
O.Z. racing wheels
front rims 13” x 10”
wide rear rims 13” x 12.5”
Competition history
Notable entrantsAll GP3 Series teams
Notable driversAll GP3 Series drivers
Debut 2016 Catalunya GP3 round
Last event 2018 Yas Marina GP3 round
RacesWins Poles F/Laps
51512651
Constructors' Championships3
Drivers' Championships3

The Dallara GP3/16 was the third generation of the series. The GP3/16 made its debut at the start of the 2016 season in Barcelona, and remained in use until the final season of the GP3 Series in 2018. [8] The Dallara GP3/16 chassis was designed to replace the GP3/13 chassis in the 2016 season. Dallara began the development, design and construction of the GP3/16 chassis in mid-2014. The first chassis began assembly in July 2015, and was completed in September.[ citation needed ]

Chassis

The Dallara GP3/16 car has a more radical design with the all-new F1-style lower nose, original rear wing, air ventilation in both sidepods and also engine cover. The "shark fin" engine cover was replaced by a more conventional design. The rear wing of all Dallara GP3/16 cars were slightly updated for the 2017 season due to the introduction of the Drag Reduction System (DRS) used in Formula One and Formula 2. [9]

Engine package

The GP3/16 used a 3.4 L (207 cu in) V6 naturally-aspirated direct-injected fuel-efficient engine developed by Mecachrome Motorsport, replacing the P57 engine developed by Advanced Engine Research (AER) that was used in its predecessor, the GP3/13.

Aerodynamics

The Dallara GP3/16 car would incorporate the Drag Reduction Systems (DRS) rear wing flap for the first time since 2017 season in a purpose for overtaking maneuver assist.

Related Research Articles

<span class="mw-page-title-main">Dallara</span> Automobile chassis manufacturer

Dallara Group S.r.l. is the largest multi-national Italian race car manufacturer, founded by its current President, Giampaolo Dallara. After working for Ferrari, Maserati, Lamborghini and De Tomaso, in 1972 in his native village of Varano de' Melegari (Parma), he created Dallara Automobili.

<span class="mw-page-title-main">GP2 Series</span> Former auto racing championship

The GP2 Series was a form of open wheel motor racing introduced in 2005 following the discontinuation of the long-term Formula One feeder series, Formula 3000. The GP2 format was conceived by Bernie Ecclestone and Flavio Briatore, while Ecclestone also has the rights to the name GP1. The series was organized by Bruno Michel. In 2010, the GP3 Series class was launched, as a feeder class for the GP2 series. In 2017, the series was rebranded as the FIA Formula 2 Championship.

Mecachrome SAS is a precision engineering company based in France that operates in the aerospace, motor racing, energy and defence sectors.

<span class="mw-page-title-main">GP3 Series</span> Former single-seater racing series

The GP3 Series, or GP3 for short, was a single-seater motor racing series launched in 2010 as a feeder series for the GP2 Series, introduced by GP2 organiser Bruno Michel. GP3 followed the entire European leg of the Formula One series and the GP2 series as a support race for the two. Like the GP2 series, GP3 gave drivers the experience of the Grand Prix environment, and took advantage of the infrastructure, such as marshals and medical facilities, in place for the Formula One events. GP3 Series mainly raced on European circuits, but had appearances on other international race tracks, with rounds in the 2015 season at the Bahrain International Circuit in Bahrain and the Yas Marina Circuit in United Arab Emirates.

The 2011 GP3 Series season was the second season of the GP3 Series, a feeder series for the GP2 Series. The season began at Istanbul Park on 7 May and concluded at Autodromo Nazionale Monza on 11 September after eight rounds made up of two races each and all in support of European Formula 1 Grands Prix. The 2010 champion Esteban Gutiérrez graduated to the GP2 Series so did not defend his title.

Bernard Dudot is a French engineer who was instrumental in the development of the turbo V6 and normally aspirated V10 engines of Formula One while working for Alpine and Renault. As of 2005, he is Head of Engineering of the GP2 Series. He has a similar role in GP3 Series since the creation of that category. He is also a consultant for Le Mans organisation.

<span class="mw-page-title-main">2013 GP3 Series</span>

The 2013 GP3 Series was the fourth season of the third-tier of Formula One feeder championship and also fourth season under the moniker of GP3 Series, a motor racing feeder series for Formula One and sister series GP2.

<span class="mw-page-title-main">Dallara GP2/11</span> Italian GP2 series race car

The Dallara GP2/11 was a racing car developed by Italian manufacturer Dallara for use in the GP2 Series, a feeder series for Formula One. The GP2/11 is the overall third generation of car used by the GP2 Series and first generation of car used by the FIA Formula 2 Championship, and was introduced at the Yas Marina round of the 2011 season, replacing the Dallara GP2/08, which was also developed by Dallara. The GP2/11 was scheduled to be used until the end of the 2013 season, in keeping with the series' philosophy of upgrading its chassis every three years, but series organisers decided to keep it in competition for another three-year cycle in a bid to cut costs in the category. The GP2/11 was scheduled to be used until the end of the 2016 season before a next-generation car was introduced in 2017, but this was delayed again until 2018. As the GP2 Series and Formula 2 Championship are spec series, the GP2/11 was raced by every team and driver on the grid.

<span class="mw-page-title-main">2015 GP3 Series</span>

The 2015 GP3 Series was the sixth season of the third-tier of Formula One feeder championship and also sixth season under the moniker of GP3 Series, a motor racing feeder series that was run in support of the 2015 FIA Formula One World Championship and sister series GP2. Thirty-one drivers represented eight teams over the course of the season's nine rounds, starting in Spain on 9 May and ending in Abu Dhabi on 29 November. It was the final season for the Dallara GP3/13-AER P57 V6 chassis and engine package that debuted in 2013. A new Dallara-built chassis was introduced for 2016 along with a Mecachrome normally-aspirated V6 engine.

<span class="mw-page-title-main">2016 GP3 Series</span> Motorsport season

The 2016 GP3 Series was the seventh season of the third-tier of Formula One feeder championship and also seventh season under the moniker of GP3 Series, a motor racing feeder series that runs in support of the 2016 FIA Formula One World Championship and sister series GP2. In keeping with the series' philosophy of updating its technical regulations every three years, the Dallara GP3/13 chassis introduced in the 2013 season was discontinued and Dallara supplied all teams with a new model known as the GP3/16, which will be used until 2018.

<span class="mw-page-title-main">2017 GP3 Series</span> Sportive season

The 2017 GP3 Series was the eighth season of the third-tier of Formula One feeder championship and also eighth season under the moniker of GP3 Series, a motor racing feeder series that runs in support of the 2017 FIA Formula One World Championship and sister series Formula 2.

<span class="mw-page-title-main">FIA Formula 2 Championship</span> Single-seater racing championship

The FIA Formula 2 Championship is a second-tier single-seater championship organized by the Fédération Internationale de l'Automobile (FIA). Held on racing circuits, the championship was introduced in 2017, following the rebranding of the long-term Formula One feeder series GP2. The series' original founders were Flavio Briatore and current managing director Bruno Michel. It is the last step on the FIA Global Pathway from Karting to Formula One. While it is not absolutely necessary to do so, most current F1 drivers have participated in either Formula 2 or GP2 before graduating to Formula One.

<span class="mw-page-title-main">2018 Formula 2 Championship</span> Second-tier auto racing season

The 2018 FIA Formula 2 Championship was the fifty-second season of the second-tier of Formula One feeder championship and also second season under the moniker of FIA Formula 2 Championship, a motor racing championship for Formula 2 cars that is sanctioned by the Fédération Internationale de l'Automobile (FIA). It is an open-wheel racing category that serves as the second tier of formula racing in the FIA Global Pathway. The category run in support of the 2018 FIA Formula One World Championship, with each of the twelve rounds running in conjunction with a Grand Prix. It was the first FIA Formula 2 season to feature a new chassis and engine package.

<span class="mw-page-title-main">Dallara F2 2018</span> Open-wheel racing car

The Dallara F2 2018 was an open-wheel racing car developed by Italian manufacturer Dallara for use in the FIA Formula 2 Championship, a feeder-series for Formula One until being replaced by the Dallara F2 2024 from the 2024 season onwards. The F2 2018 was the second car used by the FIA Formula 2 Championship and was introduced for the 2018 championship as a replacement for the aging Dallara GP2/11 chassis. As the Formula 2 Championship is a spec series, the F2 2018 was raced by every team and driver competing in the series as a cost-control method. The F2 2018 was Dallara's first ever turbo-powered Formula 2 car and also the first turbo-powered Formula 1 junior feeder-series car since the Dallara GP3/10 in the GP3 Series.

<span class="mw-page-title-main">2018 Sakhir Formula 2 round</span>

The 2018 Bahrain FIA Formula 2 round was a pair of motor races for Formula 2 cars that took place on 7 and 8 April 2018 at the Bahrain International Circuit in Sakhir, Bahrain as part of the FIA Formula 2 Championship. It was the first round of the 2018 FIA Formula 2 Championship and ran in support of the 2018 Bahrain Grand Prix.

<span class="mw-page-title-main">FIA Formula 3 Championship</span> Single-Seater Racing Championship

The FIA Formula 3 Championship is a third-tier international single-seater racing championship and organised by the Fédération Internationale de l'Automobile (FIA). The championship launched in 2019 as a feeder series for the FIA Formula 1 World Championship and FIA Formula 2 Championships. It was the result of a merger between two third-tier single-seater racing championships, the GP3 Series and the FIA Formula 3 European Championship. This championship is part of the FIA Global Pathway consolidation project plan. Unlike its co-predecessor, the Formula 3 European Championship, the series runs exclusively in support of Formula One races.

<span class="mw-page-title-main">Dallara F3 2019</span> Open-wheel formula racing car built by Dallara

The Dallara F3 2019 is an open-wheel racing car developed by Italian manufacturer Dallara for use in the FIA Formula 3 Championship, a feeder series for Formula One. The F3 2019 is the first car used by the FIA Formula 3 Championship and was introduced for the championship's inaugural season and scheduled to be used until the 2024 season before being replaced by planned Dallara F3 2025 from 2025 season onwards. As the Formula 3 Championship is a spec series, the F3 2019 is raced by every team and driver competing in the series. The F3 2019 was unveiled at the weekend of the final GP3 Series round in Abu Dhabi in November 2018 and later made its first public appearance when teams contesting the inaugural championship completed a test day at the Circuit de Nevers Magny-Cours in February 2019.

<span class="mw-page-title-main">Mecachrome V634 engine</span> Reciprocating internal combustion engine

The Mecachrome V634 engine is a 3.4-litre, turbocharged or naturally-aspirated, V6 racing engine, designed, developed and produced by Mecachrome, and is used in the FIA Formula 2 Championship, FIA Formula 3 Championship, and the World Endurance Championship.

<span class="mw-page-title-main">2012 Monza GP3 Series round</span>

The 2012 Monza GP3 Series round was a GP3 Series motor race held on September 10 and 11, 2012 at Autodromo Nazionale Monza, Italy. It was the eighth and final round of the 2012 GP3 Series. The race supported the 2012 Italian Grand Prix.

<span class="mw-page-title-main">2013 Catalunya GP3 Series round</span>

The 2013 Catalunya GP3 Series round was a GP3 Series motor race held at the Circuit de Catalunya in Montmeló, Spain on 11 and 12 May 2013 as the first round of the 2013 GP3 Series season. The race was used to support the 2013 Spanish Grand Prix. This is the debut of the GP3 Series' second-generation chassis, the Dallara GP3/13.

References

  1. "The Car". www.gp3series.com. GP3 Series.
  2. "GP3 Series reveals new 400bhp car to be raced from 2013". Autosport.com. Haymarket Publications. 6 September 2012. Archived from the original on 11 September 2012. Retrieved 7 September 2012. GP3 plans to announce the nine teams that will compete in the category next year, with a limit of 27 cars on the grid. Michel also confirmed that the format of the calendar will remain unchanged next season, with eight double-headers running in support of F1.
  3. "The Car". www.gp3series.com. GP2 Series Ltd.
  4. "GP3/13 development car gets first shakedown". GP3 Series . GP2 Motorsport Limited. 12 July 2012. Archived from the original on 22 September 2012. Retrieved 28 August 2012.
  5. "GP3 Series announce line up for 2013–15". GP3Series.com. GP2 Series Limited. 1 October 2012. Archived from the original on 4 October 2012. Retrieved 1 October 2012.
  6. "Sainz Jr fastest as second generation GP3 car makes its debut". GP3Series.com. GP2 Series Ltd. 20 February 2013. Archived from the original on 23 February 2013. Retrieved 21 February 2013.
  7. "The Car". gp3series.com. GP3 Series.
  8. "New GP3/16 revealed in Monza - GP3 Series". gp3series.com. Retrieved 3 September 2015.
  9. "DRS to be added to GP3 car for 2017 season". gp3series.com. GP3 Series . Retrieved 10 October 2016.