Ersatz Yorck-class battlecruiser

Last updated

SMS Ersatz Yorck line color-aaa3.png
Line drawing of Ersatz Yorck
Class overview
NameErsatz Yorck
Builders
OperatorsWar Ensign of Germany 1903-1918.svg  Imperial German Navy
Preceded by Mackensen class (planned)
Succeeded by O class (planned)
Built1915–1918
Planned3
Cancelled3
General characteristics
Type Battlecruiser
Displacement
Length227.8 m (747 ft 5 in)
Beam30.4 m (99 ft 9 in)
Draft9.3 m (30 ft 6 in)
Installed power
Propulsion
Speed27.3 knots (50.6 km/h; 31.4 mph)
Range5,500  nmi (10,200 km; 6,300 mi) at 14 knots (26 km/h; 16 mph)
Complement
  • 47 officers
  • 1,180 sailors
Armament
Armor

The Ersatz Yorck class was a group of three battlecruisers ordered but not completed for the German Kaiserliche Marine (Imperial Navy) in 1916. The three ships had originally been ordered as additions to the Mackensen class, but developments abroad, particularly the British Renown-class battlecruisers, led to the navy re-designing the ships. The primary change was an increase of the main battery from eight 35-centimeter (14 in) guns to eight 38 cm (15 in) weapons. Work on the first ship had already begun by the time the navy decided to re-design the ships, so the design staff was constrained by the need to use the material already assembled.

Contents

The name derived from the fact that the lead ship was intended as a replacement (German: ersatz ) for the armored cruiser Yorck, lost to mines in 1914, and it had been ordered under the provisional name Ersatz Yorck. The other two ships, Ersatz Gneisenau, and Ersatz Scharnhorst, were considered to be replacements for the armored cruisers Gneisenau and Scharnhorst, both of which had been sunk at the Battle of the Falkland Islands, also in 1914.

As with the Mackensens, the three ships of the Ersatz Yorck class were never completed. This was primarily due to shifting wartime construction priorities; U-boats were deemed more important to Germany's war effort later in the war, and so work on other types of ships was slowed or halted outright. The lead ship, Ersatz Yorck, was the only vessel of the three to have begun construction, though she was over two years from completion by the time work was abandoned. The ship was broken up on the slipway and machinery that had been assembled for Ersatz Gneisenau was installed in the first four Type U 151 U-boats. Nevertheless, the work that had gone into the Ersatz Yorck design was not a wasted effort; when the design staff began work on the Scharnhorst-class battleships in the 1930s, they used the plans for Ersatz Yorck as a starting point.

Development

Line-drawing of the Mackensen
class, on which the Ersatz Yorck
design was based Mackensen class battlecruisers scetch.svg
Line-drawing of the Mackensen class, on which the Ersatz Yorck design was based

The fourth and final Naval Law, passed in 1912, governed the building program of the German Navy during World War I. The Reichsmarineamt (RMA – Imperial Naval Office) decided that to meet the requirements set in the 1912 law, the Navy should construct one battleship and one battlecruiser every year between 1913 and 1917, with an additional unit of both types in 1913 and 1916. The RMA initially believed the war would be over quickly, but by early 1915, it had become clear that it would not be the case. As a result, it made the decision to use the prescribed construction program to replace the five armored cruisers that had been sunk in the first six months of the war with new battlecruisers, rather than lay down new battleships. The last three of these new battlecruisers were ordered to replace Yorck and the two Scharnhorst-class cruisers, the former having been sunk by German mines in November 1914 and the latter pair being sunk at the Battle of the Falkland Islands the following month. [1] As they were considered replacements for old ships, rather than as new additions to the fleet, they were ordered under provisional names as " ersatz (replacement) [name of the ship to be replaced]". [2]

The three vessels of the Ersatz Yorck class were to have been members of the Mackensen class, and initial funding for the ships was allocated on 21 February 1915. Admiral Eduard von Capelle replaced Grossadmiral (Grand Admiral) Alfred von Tirpitz as the State Secretary of the RMA on 16 March 1916, which led to questions in the RMA over the three ships. Kaiser Wilhelm II wanted the next group of battlecruisers to be equipped with 38-centimeter (15 in) guns instead of the 35 cm (14 in) pieces carried by the Mackensens. On 19 April, the Construction Department submitted several design proposals, including GK1, GK2, and GK3. [lower-alpha 1] All three were armed with 38 cm guns and had a displacement of 34,000 to 38,000  t (33,000 to 37,000 long tons ). This marked a significant increase over the Mackensen design, which displaced 31,000 t (31,000 long tons) as designed; the bulk of the displacement growth was accounted by the heavier main battery, larger, more powerful engines, and additional boilers that provided a speed increase of 1.5 to 2 knots (2.8 to 3.7 km/h; 1.7 to 2.3 mph) over the Mackensens. [2] [3]

Vizeadmiral (Vice Admiral) Reinhard Scheer, the commander of the High Seas Fleet, expressed his preference for GK2, the largest and fastest of the versions (with a top speed of 29.5 knots (54.6 km/h; 33.9 mph)), during a meeting on 29 April. Some consideration was given to the idea that the new battlecruiser design should represent a merging of the battleship and battlecruiser types—what was later termed a "fast battleship"—a concept Wilhelm II had been pushing for years. The so-called "grosskampfschiff" (large combat ship) would simplify construction and design work, but Konteradmiral (Rear Admiral) Georg Hebbinghaus, the head of the General Navy Department, pointed out that under the German Naval Laws, such a change would not be permitted and that the laws would need to be rewritten to allow the new type. Hebbinghaus nevertheless allowed that the design staff had some leeway in warship development that could be used to get around the legal restrictions. [3] [4]

HMS Renown, which spurred the re-design of the three Ersatz Yorck
s Renown-4.jpg
HMS Renown, which spurred the re-design of the three Ersatz Yorcks

In a meeting on 12 August, Hebbinghaus stated that he wanted to build ships that were similar to traditional battleship designs, preferring survivability to offensive power; he argued that the Mackensens should be cancelled in favor of this new type, since they had been designed before the navy had any war experience on which to base them. Capelle stated that the last three Mackensens—Ersatz Yorck, Ersatz Scharnhorst, and Ersatz Gneisenau—and Ersatz Friedrich Carl if work had not proceeded too far along, should be reordered as a completely new design, GK6, which he submitted. This design called for a ship armed with eight 38 cm guns on a displacement of 36,500 t (35,900 long tons) with a top speed of 28 knots (52 km/h; 32 mph). Scheer objected to the decrease in speed, and for the time being, Hebbinghaus's and Capelle's proposals came to nothing. Another meeting on 24 August concluded that all seven ships of the Mackensen class would be built as designed, the General Navy Department noting that they would "still undoubtedly represent a very valuable addition to the fleet in 1919." [3]

Hebbinghaus again raised the issue of the main battery on 31 October, since by then it had become known that the United States Navy would be building the Lexington-class battlecruisers, rumored to be armed with 40 cm (16 in) guns, and that the British were arming their Renown-class battlecruisers with 38 cm guns. By this time, much of the construction resources of the German Navy had been redirected to the U-boat fleet, so the new ships could not be completed before 1920; as a result, the Mackensens would be inferior to the latest American and British designs. Hebbinghaus pushed for the battlecruisers to be armed with at least 38 cm guns, but preferably 40 cm or even 43 cm (16.9 in) guns. By that time, Ersatz Friedrich Carl had been laid down the previous November, and was too far along to be converted, leaving the last three Mackensens as the only members available to be rearmed. The Construction Department accordingly rushed to redesign the vessels to equip them with 38 cm guns, but the work was hampered by the fact that the navy had already ordered the machinery and armor plate for the ships, and work on the materials had already begun. Indeed, Ersatz Yorck had already been laid down in July. [2] [5]

Design

During the re-design process, Scheer requested that the new ships have increased armament, armor, and speed compared to the first four Mackensens, but owing to the constraints imposed, only the armament could be increased, and the deck armor and speed had to be reduced slightly to keep displacement in check. Displacement rose about 2,500 t (2,500 long tons) compared to the Mackensen class, with about 1,000 t (980 long tons) of that increase being a result of the heavier 38 cm guns. The length and draft were also increased to keep the ships' speed from falling too much. Since the ships' propulsion systems had already been ordered, they were kept essentially identical to the original Mackensen design, although internal rearrangements allowed the boilers to be trunked into one large funnel rather than the two of the Mackensens, which conferred several advantages. These included a significant reduction in smoke interference with the spotting tops and additional room to move the tripod mast further aft, which reduced the risk of the mast falling on the conning tower in the event of battle damage and increased the field of view from the spotting top. [6]

General characteristics

The Ersatz Yorck-class ships were an enlargement of the previous Mackensen-class ships. They were 227.8 m (747 ft 5 in) long at the waterline, compared to 223 m (731 ft 8 in) on the earlier vessels. Ersatz Yorck had the same beam as the earlier vessels, at 30.4 m (99 ft 9 in), and the same maximum draft of 9.3 m (30 ft 6 in). The ships were planned to displace 33,500 t (33,000 long tons) as designed and up to 38,000 t (37,000 long tons) fully laden. The Ersatz Yorck-class ships' hulls were to have been constructed with longitudinal steel frames with the outer plating riveted on. The hulls were divided into eighteen watertight compartments. The crew of the ship was to consist of 47 officers and 1,180 sailors. [2] [5]

Machinery

As with all German battlecruisers that had been built, the Ersatz Yorck-class ships would have been equipped with four sets of Parsons steam turbines, [7] each of which drove a 3-bladed screw that was 4.2 m (13 ft 9 in) in diameter. The turbines were supplied with steam by 24 coal-fired Schulz-Thornycroft single-ended boilers and 8 oil-fired Schulz-Thornycroft double-ended boilers. Ersatz Yorck and Ersatz Gneisenau were intended to use Föttinger fluid transmission for their turbines, while Ersatz Scharnhorst's turbines retained direct coupled geared transmissions. The ships were to have electrical power provided by diesel generators. The Ersatz Yorcks were intended to mount a pair of rudders side by side for steering. [2] [7]

The power plant was rated 90,000 shaft horsepower (67,000  kW ; 91,000  PS ) and 295  revolutions per minute, the same as the preceding Mackensen-class ships. Their slightly greater size reduced their speed somewhat, from 28 knots (52 km/h; 32 mph) in the Mackensen-class ships to 27.3 knots (50.6 km/h; 31.4 mph) for the new vessels. The ships were designed to store 850 t (840 long tons) of coal and 250 t (250 long tons) of oil in purpose-designed fuel bunkers. However, the areas of the hull between the torpedo bulkhead and the outer wall of the ship were also used for fuel storage. This additional space provided an increased total of 4,000 t (3,900 long tons) of coal and 2,000 t (2,000 long tons) of oil. With fuel stores topped off, the ships were estimated to have been able to steam for 5,500 nautical miles (10,200 km; 6,300 mi) at a cruising speed of 14 kn (26 km/h; 16 mph). [8]

Armament

The battleship SMS Baden, main battery trained to port; the Ersatz Yorck
-class ships would have been similarly armed. Bundesarchiv Bild 183-R17062, Linienschiff "Baden".jpg
The battleship SMS Baden, main battery trained to port; the Ersatz Yorck-class ships would have been similarly armed.

The Ersatz Yorck-class battlecruisers were to be armed with a main battery of eight 38 cm (15 in) SK L/45 guns in four Drh LC/1913 twin-gun turrets; [lower-alpha 2] this was identical to the main armament carried by the Bayern-class battleships. In both designs the turrets were arranged in two superfiring pairs, one forward and the other aft. These turrets originally allowed for depression of the guns to −8 degrees and elevation to 16 degrees, though Bayern had hers modified to allow 20 degrees of elevation, a common practice for German naval weapons during the latter part of the war. The guns had to be returned to 2.5 degrees to reload them. The guns had a maximum range of 20,250 m (66,440 ft). Each turret was fitted with a stereo rangefinder. Intended ammunition stowage for the Ersatz Yorck class was 720 shells or 90 rounds per gun; these were 750-kilogram (1,650 lb) shells that were light for guns of their caliber. The shell allotment was divided between armor piercing and high explosive versions, with 60 of the former and 30 of the latter. At a range of 20,000 m (66,000 ft), the armor-piercing shells could penetrate up to 336 mm (13.2 in) of steel plate. The guns had a rate of fire of around one shell every 38 seconds. Muzzle velocity was 805 meters per second (2,640 ft/s). [2] [10] [11]

The ships' secondary battery was to have consisted of twelve 15 cm (5.9 in) SK L/45 quick-firing guns mounted in armored casemates along the central superstructure. These guns were intended for defense against torpedo boats, and were supplied with a total of 2,240 shells. The guns could engage targets out to 13,500 m (44,300 ft), and after improvements in 1915, their range was extended to 16,800 m (55,100 ft). The guns had a sustained rate of fire of 5 to 7 rounds per minute. The shells were 45.3 kg (100 lb), and were loaded with a 13.7 kg (30 lb) RPC/12 propellant charge in a brass cartridge. The guns fired at a muzzle velocity of 835 metres per second (2,740 ft/s). The ships were also to be equipped with eight 8.8 cm (3.5 in) SK L/45 flak guns in single pedestal mounts. Four were arranged around the rear superfiring main battery turret and the other four around the forward conning tower. The guns were placed in MPL C/13 mountings, which allowed depression to −10 degrees and elevation to 70 degrees. These guns fired 9 kg (20 lb) shells, and had an effective ceiling of 9,150 m (30,020 ft) at 70 degrees. [12] [13]

As was standard for warships of the period, the Ersatz Yorcks were to be equipped with submerged torpedo tubes. There were three 60 cm (24 in) tubes: one in the bow, and one on each flank of the ship. The torpedoes were the H8 type, which were 9 m (30 ft) long and carried a 210 kg (463 lb) hexanite warhead. The torpedoes had a range of 8,000 m (8,700 yd) when set at a speed of 35 knots (65 km/h; 40 mph); at a reduced speed of 28 knots (52 km/h; 32 mph), the range increased significantly to 15,000 m (16,000 yd). [2] [14] The ships would have been supplied with approximately fifteen torpedoes. [15]

Armor

The Ersatz Yorck-class ships were protected with Krupp cemented steel armor, as was the standard for German warships of the period. The armor layout was identical to the preceding Mackensen class, which was itself very similar to the armor scheme on the preceding Derfflinger-class ships. [16] [lower-alpha 3] They had an armor belt that was 300 mm (11.8 in) thick in the central citadel of the ship, where the most important parts of the ship were located. This included the ammunition magazines and the machinery spaces. The belt was reduced in less critical areas, to 120 mm (4.7 in) forward and 100 mm (3.9 in) aft. The belt tapered down to 30 mm (1.2 in) at the bow, though the stern was not protected by armor at all. A 45 mm (1.8 in) torpedo bulkhead ran the length of the hull, several meters behind the main belt. The main armored deck ranged in thickness from 30 mm in less important areas, to 80 mm (3.1 in) in the sections that covered the more critical areas of the ship. [16]

The forward conning tower was protected with heavy armor: the sides were 300 mm thick and the roof was 130 mm (5.1 in). The rear conning tower was less well armored; its sides were only 200 mm (7.9 in) and the roof was covered with 50 mm (2 in) of armor plate. The main battery gun turrets were also heavily armored: the turret sides were 270 mm (11 in) thick and the roofs were 110 mm (4.3 in). The 15 cm guns had 150 mm worth of armor plating in the casemates; the guns themselves had 70 mm (2.8 in) shields to protect their crews from shell splinters. [16]

Construction and cancellation

The contracts for the ships had originally been allocated while still members of the Mackensen class. Ersatz Yorck, a replacement for the armored cruiser Yorck, was awarded to AG Vulcan in Hamburg on 10 April 1915. Ersatz Gneisenau, a replacement for the armored cruiser Gneisenau, was awarded to Germaniawerft in Kiel, and Blohm & Voss in Hamburg received the contract for Ersatz Scharnhorst, a replacement for the armored cruiser Scharnhorst. Work on Ersatz Yorck began with her keel laying in July 1916 under yard number 63, and the midship section of the hull had been assembled by the time the ships were redesigned. [2] [5]

The ships were never completed, primarily because by 1917, the shipbuilding industry had largely been diverted to support the U-boat Campaign, which had become the priority of the Navy. After 1917, work on Ersatz Yorck only took place in order to occupy dockyard workers who could not be employed on U-boat construction. [lower-alpha 4] The RMA filed a report dated 1 February 1918, which stated that capital ship construction had stopped, primarily due to the shifting priorities to the U-boat war. As a result, the hull frames that had been assembled were subsequently scrapped on the slipway. Some material for Ersatz Gneisenau had been constructed, including the ship's diesel generators, which were subsequently installed in the first four Type U 151 U-boats U-151, U-152, U-153, and U-154. No work was done on Ersatz Scharnhorst before the ships were cancelled. [2] [19]

Already in 1918, the design staff revived the grosskampfschiff concept with a series of design studies that ranged from smaller counterparts to the British Courageous class of "large light cruisers" to very large, 45,000 t (44,000 long tons) battlecruisers armed with 42 cm (16.5 in) guns. The design studies ultimately demonstrated that the type of ship that Scheer desired was impractical owing to the size limitations imposed by the German Navy's infrastructure, specifically the existing dry docks and the Kaiser Wilhelm Canal. [4] Though the Ersatz Yorck-class ships were not completed, the design formed the starting point for the work that ultimately produced the Scharnhorst-class battleships built by the Kriegsmarine in the mid-1930s. [2]

See also

Notes

Footnotes

  1. "GK" stood for "Grosse Kreuzer" (large cruiser), the German term for battlecruisers at the time. [3]
  2. In Imperial German Navy gun nomenclature, "SK" (Schnelladekanone—quick loading gun) denotes that the gun quick firing, while the L/45 denotes the length of the gun. In this case, the L/45 gun is 45 calibers, meaning that the gun barrel is 45 times as long as it is in diameter. [9]
  3. The figures listed here are those for the Derfflinger class; specific figures for the Ersatz Yorck class are unknown. German naval historian Erich Gröner states "The outfit of Krupp armour was similar to that of the Derfflinger class." [17]
  4. For example, men at AG Vulcan continued to work the battleship Württemberg into 1917, despite the fact that the Navy had determined that she could not be completed, primarily to clear the slipway so it could be used for other projects. [18]

Citations

  1. Herwig, pp. 158, 200, 206.
  2. 1 2 3 4 5 6 7 8 9 10 Gröner, Jung, & Maass, p. 59.
  3. 1 2 3 4 Staff, p. 323.
  4. 1 2 Dodson, p. 127.
  5. 1 2 3 Staff, p. 324.
  6. Staff, pp. 324, 326.
  7. 1 2 Campbell & Sieche, p. 156.
  8. Gröner, Jung, & Maass, pp. 58–59.
  9. Grießmer, p. 177.
  10. Friedman, pp. 131–133.
  11. Staff, p. 326.
  12. Friedman, pp. 143–144, 147.
  13. Campbell & Sieche, pp. 140, 155.
  14. Friedman, p. 339.
  15. Staff, p. 327.
  16. 1 2 3 Gröner, Jung, & Maass, p. 56.
  17. Gröner, Jung, & Maass, p. 57.
  18. Nottelmann, pp. 320–321.
  19. Weir, p. 179.

Related Research Articles

SMS <i>Scharnhorst</i> Armored cruiser of the German Imperial Navy

SMS Scharnhorst was an armored cruiser of the Imperial German Navy, built at the Blohm & Voss shipyard in Hamburg, Germany. She was the lead ship of her class, which included SMS Gneisenau. Scharnhorst and her sister were enlarged versions of the preceding Roon class; they were equipped with a greater number of main guns and were capable of a higher top speed. The ship was named after the Prussian military reformer General Gerhard von Scharnhorst and commissioned into service on 24 October 1907.

<i>Bayern</i>-class battleship Battleship class of the German Imperial Navy

The Bayern class was a class of four super-dreadnought battleships built by the German Kaiserliche Marine. The class comprised Bayern, Baden, Sachsen, and Württemberg. Construction started on the ships shortly before World War I; Baden was laid down in 1913, Bayern and Sachsen followed in 1914, and Württemberg, the final ship, was laid down in 1915. Only Baden and Bayern were completed, due to shipbuilding priorities changing as the war dragged on. It was determined that U-boats were more valuable to the war effort, and so work on new battleships was slowed and ultimately stopped altogether. As a result, Bayern and Baden were the last German battleships completed by the Kaiserliche Marine.

<i>Mackensen</i>-class battlecruiser Class of German battlecruisers

The Mackensen class was the last class of battlecruisers to be built by Germany in World War I. The design initially called for seven ships, but three of them were redesigned as the Ersatz Yorck class. Of the four ships of the Mackensen class, Mackensen, Graf Spee, and Prinz Eitel Friedrich were launched, and Fürst Bismarck was not—but none were completed, after wartime shipbuilding priorities were redirected towards U-boats—and the ships were broken up in the early 1920s. The lead ship of the class was named for August von Mackensen, a prominent military commander during the war. In response to the Mackensen-class ships, the British Royal Navy laid down the Admiral-class battlecruisers, all but one of which would eventually be cancelled; the sole survivor, HMS Hood, was completed after the end of the war.

<i>Scharnhorst</i>-class battleship Kriegsmarine battleship class, built 1935–1939

The Scharnhorst class was a class of German battleships built immediately prior to World War II. The first capital ships of Nazi Germany's Kriegsmarine, it comprised two vessels: Scharnhorst and Gneisenau. Scharnhorst was launched first, and is considered to be the lead ship by some sources; they are also referred to as the Gneisenau class in some other sources, as Gneisenau was the first to be laid down and commissioned. They marked the beginning of German naval rearmament after the Treaty of Versailles. The ships were armed with nine 28 cm (11 in) SK C/34 guns in three triple turrets; plans to replace these with six 38 cm (15 in) SK C/34 guns in twin turrets were never realized.

O-class battlecruiser Proposed battlecruiser class of the German Navy

The O class was a planned class of three battlecruisers for the Kriegsmarine before World War II. Prompted by a perceived lack in ship numbers when compared with the British Royal Navy, the O class' design was born with the suggestion of modifying the P-class cruiser design with 380 mm (15 in) guns instead of 283 mm (11.1 in).

The P class was a planned group of twelve heavy cruisers of Nazi Germany's Kriegsmarine; they were the successor to the Deutschland-class cruisers. Design work began in 1937 and continued until 1939; at least twenty designs were submitted with nine of them being considered. There were three designs that were selected as the final contenders. One design was armed with six 283mm main guns in one triple turret forward and one more turret aft. It had two 150mm double secondary gun turrets as secondary armament with one being positioned above and just fore of the aft of the main 283mm main turret, and the other being in front and lower of the front main gun turret. This design had more beam than the other 2 designs. It also mounted 2 seaplanes on its fantail instead of the mid ship area. The final design was armed with six 28 cm (11 in) quick-firing guns in two triple turrets, as in the preceding Deutschland class. The ships were designated as Panzerschiff, and given the preliminary names P1–P12. They were an improved design over the preceding planned D-class cruisers, which had been canceled in 1934. Although the ships were already assigned to shipyards, construction never began on the P-class ships after the O-class battlecruiser design superseded them.

<i>Helgoland</i>-class battleship Battleship class of the German Imperial Navy

The Helgoland class was the second class of dreadnought battleships to be built for the German Kaiserliche Marine. Constructed from 1908 to 1912, the class comprised four ships: Helgoland, the lead ship; Oldenburg; Ostfriesland; and Thüringen. The design was a significant improvement over the previous Nassau-class ships; they had a larger main battery—30.5 cm (12 in) main guns instead of the 28 cm (11 in) weapons mounted on the earlier vessels—and an improved propulsion system. The Helgolands were easily distinguished from the preceding Nassaus by the three funnels that were closely arranged, compared to the two larger funnels of the previous class. The ships retained the hexagonal main battery layout of the Nassau class.

<i>Roon</i>-class cruiser Class of armored cruisers of the German Imperial Navy

The Roon class was a pair of armored cruisers built for the German Kaiserliche Marine in the 1900s. The two ships of the class, Roon and Yorck, closely resembled the earlier Prinz Adalbert-class cruisers upon which they were based. The Roon class incorporated slight incremental improvements, including a pair of extra boilers. The ships were easily distinguished from their predecessors by the addition of a fourth funnel. Though the additional boilers were meant to increase the ships' speed, both vessels failed to reach their designed top speed. In addition, the ships had comparatively light armament and thin armor protection, so they compared poorly with their foreign contemporaries, particularly the armored cruisers of their primary opponent, the British Royal Navy.

SMS <i>Yorck</i> Armored cruiser of the German Imperial Navy

SMS Yorck was the second and final ship of the Roon class of armored cruisers built for the German Kaiserliche Marine as part of a major naval expansion program aimed at strengthening the fleet. Yorck was named for Ludwig Yorck von Wartenburg, a Prussian field marshal. She was laid down in 1903 at the Blohm & Voss shipyard in Hamburg, launched in May 1904, and commissioned in November 1905. The ship was armed with a main battery of four 21 cm (8.3 in) guns and had a top speed of 20.4 knots. Like many of the late armored cruisers, Yorck was quickly rendered obsolescent by the advent of the battlecruiser; as a result, her peacetime career was limited.

<i>Scharnhorst</i>-class cruiser Class of armored cruisers of the German Imperial Navy

The Scharnhorst class was the last class of traditional armored cruisers built by the German Kaiserliche Marine. The class comprised two ships, Scharnhorst and Gneisenau. They were larger than the Roon-class cruisers that preceded them; the extra size was used primarily to increase the main armament of 21 cm (8.2 inch) guns from four to eight. The ships were the first German cruisers to reach equality with their British counterparts. The ships were named after 19th century Prussian army reformers, Gerhard von Scharnhorst and August von Gneisenau.

L 20e α-class battleship Cancelled battleship design of the German Imperial Navy

L 20e α was a design for a class of battleships to be built in 1918 for the German Kaiserliche Marine during World War I. Design work on the class of battleship to succeed the Bayern-class battleships began in 1914, but the outbreak of World War I in July 1914 led to these plans being shelved. Work resumed in early 1916 and lessons from the Battle of Jutland, fought later that year, were incorporated into the design. Reinhard Scheer, the commander of the fleet, wanted larger main guns and a higher top speed than earlier vessels, to combat the latest ships in the British Royal Navy. A variety of proposals were submitted, with armament ranging from the same eight 38 cm (15 in) guns of the Bayern class to eight 42 cm (16.5 in) guns.

Design 1047, also known as Project 1047, was a series of plans for a class of Dutch battlecruisers prior to the Second World War. These large capital ships were intended to counter the threat posed by Japanese aggression towards the Dutch colonies in the East Indies.

D-class cruiser (Germany) Pair of German cruisers, classified as Panzerschiffe

The D-class cruisers were a pair of German heavy cruisers, classified as panzerschiffe by the Reichsmarine. The ships were improved versions of the preceding Deutschland-class cruisers, authorized by Adolf Hitler in 1933. They were intended to counter a new French naval construction program. Displacement increased to 20,000 long tons (20,000 t), but Hitler allowed only increases to armor, prohibiting additions to the ships' main battery armament. Both ships were laid down in February 1934, but not much work done before work was cancelled pending a significant revision of the design. It was determined that the ships should be enlarged to counter the new French Dunkerque-class battleship. The construction contracts for both ships were superseded by the Scharnhorst-class battleships.

<i>Bismarck</i>-class battleship Pair of fast battleships

The Bismarck class was a pair of fast battleships built for Nazi Germany's Kriegsmarine shortly before the outbreak of World War II. The ships were the largest and most powerful warships built for the Kriegsmarine; displacing more than 41,000 metric tons normally, they were armed with a battery of eight 38 cm (15 in) guns and were capable of a top speed of 30 knots. Bismarck was laid down in July 1936 and completed in September 1940, while her sister Tirpitz's keel was laid in October 1936 and work finished in February 1941. The ships were ordered in response to the French Richelieu-class battleships. They were designed with the traditional role of engaging enemy battleships in home waters in mind, though the German naval command envisioned employing the ships as long-range commerce raiders against British shipping in the Atlantic Ocean. As such, their design represented strategic confusion that dominated German naval construction in the 1930s.

German battleship <i>Scharnhorst</i> Scharnhorst-class battleship of Nazi Germanys Kriegsmarine

Scharnhorst was a German capital ship, alternatively described as a battleship or battlecruiser, of Nazi Germany's Kriegsmarine. She was the lead ship of her class, which included her sister ship Gneisenau. The ship was built at the Kriegsmarinewerft dockyard in Wilhelmshaven; she was laid down on 15 June 1935 and launched a year and four months later on 3 October 1936. Completed in January 1939, the ship was armed with a main battery of nine 28 cm (11 in) C/34 guns in three triple turrets. Plans to replace these weapons with six 38 cm (15 in) SK C/34 guns in twin turrets were never carried out.

German battleship <i>Gneisenau</i> Scharnhorst-class battleship

Gneisenau was a German capital ship, alternatively described as a battleship and battlecruiser, of Nazi Germany's Kriegsmarine. She was the second vessel of her class, which included her sister ship, Scharnhorst. The ship was built at the Deutsche Werke dockyard in Kiel; she was laid down on 6 May 1935 and launched on 8 December 1936. Completed in May 1938, the ship was armed with a main battery of nine 28 cm (11 in) C/34 guns in three triple turrets. Plans were approved, once construction had started, to replace these weapons with six 38 cm (15 in) SK C/34 guns in twin turrets, but as this would involve a lot of redesign, construction continued with the lower calibre guns. The intent was to make the upgrade in the winter of 1940–41, but the outbreak of World War II stopped this.

H-class battleship proposals Proposed class of German battleships

The H class was a series of battleship designs for Nazi Germany's Kriegsmarine, which were intended to fulfill the requirements of Plan Z in the late 1930s and early 1940s. The first variation, "H-39", called for six ships to be built, essentially as enlarged Bismarck-class battleships with 40.6 cm (16 in) guns and diesel propulsion. The "H-41" design improved the "H-39" ship with still larger main guns, eight 42 cm (16.5 in) weapons, and reinforced deck armor. The Construction Office of the Oberkommando der Marine (OKM) concluded their work with the "H-41" design, and were not involved in subsequent plans. Two of them, "H-42" and "H-43", increased the main battery yet again, with 48 cm (18.9 in) pieces, and the enormous "H-44" design ultimately resulted with 50.8 cm (20 in) guns. The ships ranged in size from the "H-39", which was 277.8 m long on a displacement of 56,444 t, to the "H-44", at 345 m on a displacement of 131,000 t. Most of the designs had a proposed top speed in excess of 30 knots (56 km/h).

SMS <i>Nürnberg</i> (1906) Light cruiser of the German Imperial Navy

SMS Nürnberg, named after the Bavarian city of Nuremberg, was a Königsberg-class light cruiser built for the German Imperial Navy. Her sisters included Königsberg, Stettin, and Stuttgart. She was built by the Imperial Dockyard in Kiel, laid down in early 1906 and launched in August of that year. She was completed in April 1908. Nürnberg was armed with ten 4.1-inch (100 mm) guns, eight 5.2 cm (2.0 in) SK L/55 guns, and two submerged torpedo tubes. Her top speed was 23.4 knots.

References

Further reading