Forth typically combines a compiler with an integrated command shell,[a] where the user interacts via subroutines called words. Words can be defined, tested, redefined, and debugged without recompiling or restarting the whole program. All syntactic elements, including variables, operators, and control flow, are defined as words. A stack is used to pass parameters between words, leading to a Reverse Polish notation style.
For much of Forth's existence, the standard technique was to compile to threaded code, which can be interpreted faster than bytecode. One of the early benefits of Forth was size: an entire development environment—including compiler, editor, and user programs—could fit in memory on an 8-bit or similarly limited system. No longer constrained by space, there are modern implementations that generate optimizedmachine code like other language compilers. The relative simplicity of creating a basic Forth system has led to many personal and proprietary variants, such as the custom Forth used to implement the bestselling 1986 video game Starflight from Electronic Arts.[1]
Moore developed a series of microprocessors for executing compiled Forth-like code directly and experimented with smaller languages based on Forth concepts, including cmForth and colorForth. Most of these languages were designed to support Moore's own projects, such as chip design.
Forth has often been used to bring up new hardware. Forth was the first resident software on the new Intel 8086 chip in 1978, and MacFORTH was the first resident development system for the Macintosh 128K in 1984.[6]
The Canon Cat (1987) uses Forth for its system programming.
Rockwell produced single-chip microcomputers with resident Forth kernels: the R65F11 and R65F12. ASYST was a Forth expansion for measuring and controlling on PCs.[13]
The Forth programming language was used in the production of Star Wars: Episode IV – A New Hope.[citation needed] Specifically, it was used to control the Dykstraflex motion control system, which was created by John Dykstra and his team at Industrial Light & Magic. This system was instrumental in creating the complex and precise camera movements required for the space battle scenes and the trench run sequences on the Death Star.
The Dykstraflex system allowed for the pre-programming of camera movements, which could then be repeated exactly for multiple takes. This was crucial for combining live-action footage with model shots and other visual effects. Forth was chosen for its efficiency and its ability to handle real-time processing required for these intricate tasks.
History
Forth evolved from Charles H. Moore's personal programming system, which had been in continuous development since 1968.[6][14] Forth was first exposed to other programmers in the early 1970s, starting with Elizabeth Rather at the United States National Radio Astronomy Observatory (NRAO).[6] After their work at NRAO, Charles Moore and Elizabeth Rather formed FORTH, Inc. in 1973, refining and porting Forth systems to dozens of other platforms in the next decade.
Moore saw Forth as a successor to compile-link-go third-generation programming languages, or software for "fourth generation" hardware. He recalls how the name was coined:[15]
At Mohasco ["in the late 1960s"] I also worked directly on an IBM 1130 interfaced with an IBM 2250 graphics display. The 1130 was a very important computer: it had the first cartridge disk, as well as a card reader, a card punch (as backup for the disk), and a console typewriter. The 1130 let the programmer, for the first time, totally control the computer interactively.
FORTH first appeared as an entity on that 1130. It was called F-O-R-T-H, a five-letter abbreviation of FOURTH, standing for fourth-generation computer language. That was the day, you may remember, of third-generation computers and I was going to leapfrog. But because FORTH ran on the 1130 (which permitted only five-character identifiers), the name was shortened.
FORTH, Inc.'s microFORTH was developed for the Intel 8080, Motorola 6800, Zilog Z80, and RCA 1802 microprocessors, starting in 1976. MicroFORTH was later used by hobbyists to generate Forth systems for other architectures, such as the 6502 in 1978. The Forth Interest Group was formed in 1978.[16] It promoted and distributed its own version of the language, FIG-Forth, for most makes of home computer.
Forth was popular in the early 1980s,[17] because it was well suited to the limited memory of microcomputers. The ease of implementing the language led to many implementations.[18] The Jupiter ACE home computer has Forth in its ROM-resident operating system. Insoft GraFORTH is a version of Forth with graphics extensions for the Apple II.[19]
Common practice was codified in the de facto standards FORTH-79[20] and FORTH-83[21] in the years 1979 and 1983, respectively. These standards were unified by ANSI in 1994, commonly referred to as ANS Forth.[22][23]
As of 2018, the source for the original 1130 version of FORTH has been recovered, and is now being updated to run on a restored or emulated 1130 system.[24]
Forth emphasizes the use of small, simple functions called words. Words for bigger tasks call upon many smaller words that each accomplish a distinct sub-task. A large Forth program is a hierarchy of words. These words, being distinct modules that communicate implicitly via a stack mechanism, can be prototyped, built and tested independently. The highest level of Forth code may resemble an English-language description of the application. Forth has been called a meta-application language: a language that can be used to create problem-oriented languages.[25]
Forth relies on implicit use of a data stack and reverse Polish notation which is commonly used in calculators from Hewlett-Packard. In RPN, the operator is placed after its operands, as opposed to the more common infix notation where the operator is placed between its operands. Postfix notation makes the language easier to parse and extend; Forth's flexibility makes a static BNF grammar inappropriate, and it does not have a monolithic compiler. Extending the compiler only requires writing a new word, instead of modifying a grammar and changing the underlying implementation.
Using RPN, one can get the result of the mathematical expression (25 * 10 + 50) this way:
2510*50+CR.300ok
First the numbers 25 and 10 are put on the stack.
The word * takes the top two numbers from the stack, multiplies them, and puts the product back on the stack.
Then the number 50 is placed on the stack.
The word + adds the top two values, pushing the sum. CR (carriage return) starts the output on a new line. Finally, . prints the result. As everything has completed successfully, the Forth system prints OK.[26]
Even Forth's structural features are stack-based. For example:
:FLOOR5( n -- n' )DUP6<IFDROP5ELSE1-THEN;
The colon indicates the beginning of a new definition, in this case a new word (again, word is the term used for a subroutine) called FLOOR5. The text in parentheses is a comment, advising that this word expects a number on the stack and will return a possibly changed number (on the stack).
The subroutine uses the following commands: DUP duplicates the number on the stack; 6 pushes a 6 on top of the stack; < compares the top two numbers on the stack (6 and the DUPed input), and replaces them with a true-or-false value; IF takes a true-or-false value and chooses to execute commands immediately after it or to skip to the ELSE; DROP discards the value on the stack; 5 pushes a 5 on top of the stack; and THEN ends the conditional.
First a number (1 or 8) is pushed onto the stack, FLOOR5 is called, which pops the number again and pushes the result. CR moves the output to a new line (again, this is only here for readability). Finally, a call to . pops the result and prints.
Facilities
Forth's grammar has no official specification. Instead, it is defined by a simple algorithm. The interpreter reads a line of input from the user input device, which is then parsed for a word using spaces as a delimiter; some systems recognise additional whitespace characters. When the interpreter finds a word, it looks the word up in the dictionary. If the word is found, the interpreter executes the code associated with the word, and then returns to parse the rest of the input stream. If the word isn't found, the word is assumed to be a number and an attempt is made to convert it into a number and push it on the stack; if successful, the interpreter continues parsing the input stream. Otherwise, if both the lookup and the number conversion fail, the interpreter prints the word followed by an error message indicating that the word is not recognised, flushes the input stream, and waits for new user input.[27]
The definition of a new word is started with the word : (colon) and ends with the word ; (semi-colon). For example,
:XDUP1+..;
will compile the word X, and makes the name findable in the dictionary. When executed by typing 10 X at the console this will print 11 10.[28]
Most Forth systems include an assembler to write words using the processor's facilities. Forth assemblers often use a reverse Polish syntax in which the parameters of an instruction precede the instruction. A typical reverse Polish assembler prepares the operands on the stack and the mnemonic copies the whole instruction into memory as the last step. A Forth assembler is by nature a macro assembler, so that it is easy to define an alias for registers according to their role in the Forth system: e.g. "dsp" for the register used as the data stack pointer.[29]
Operating system, files, and multitasking
Most Forth systems run under a host operating system such as Microsoft Windows, Linux or a version of Unix and use the host operating system's file system for source and data files; the ANSI Forth Standard describes the words used for I/O. All modern Forth systems use normal text files for source, even if they are embedded. An embedded system with a resident compiler gets its source via a serial line.
Classic Forth systems traditionally use neither operating system nor file system. Instead of storing code in files, source code is stored in disk blocks written to physical disk addresses. The word BLOCK is employed to translate the number of a 1K-sized block of disk space into the address of a buffer containing the data, which is managed automatically by the Forth system. Block use has become rare since the mid-1990s. In a hosted system those blocks too are allocated in a normal file in any case.
Multitasking, most commonly cooperativeround-robin scheduling, is normally available (although multitasking words and support are not covered by the ANSI Forth Standard). The word PAUSE is used to save the current task's execution context, to locate the next task, and restore its execution context. Each task has its own stacks, private copies of some control variables and a scratch area. Swapping tasks is simple and efficient; as a result, Forth multitaskers are available even on very simple microcontrollers, such as the Intel 8051, Atmel AVR, and TI MSP430.[30]
Other non-standard facilities include a mechanism for issuing calls to the host OS or windowing systems, and many provide extensions that employ the scheduling provided by the operating system. Typically they have a larger and different set of words from the stand-alone Forth's PAUSE word for task creation, suspension, destruction and modification of priority.
Self-compilation and cross compilation
A full-featured Forth system with all source code will compile itself, a technique commonly called meta-compilation or self-hosting, by Forth programmers (although the term doesn't exactly match meta-compilation as it is normally defined). The usual method is to redefine the handful of words that place compiled bits into memory. The compiler's words use specially named versions of fetch and store that can be redirected to a buffer area in memory. The buffer area simulates or accesses a memory area beginning at a different address than the code buffer. Such compilers define words to access both the target computer's memory, and the host (compiling) computer's memory.[31]
After the fetch and store operations are redefined for the code space, the compiler, assembler, etc. are recompiled using the new definitions of fetch and store. This effectively reuses all the code of the compiler and interpreter. Then, the Forth system's code is compiled, but this version is stored in the buffer. The buffer in memory is written to disk, and ways are provided to load it temporarily into memory for testing. When the new version appears to work, it is written over the previous version.
Numerous variations of such compilers exist for different environments. For embedded systems, the code may instead be written to another computer, a technique known as cross compilation, over a serial port or even a single TTL bit, while keeping the word names and other non-executing parts of the dictionary in the original compiling computer. The minimum definitions for such a Forth compiler are the words that fetch and store a byte, and the word that commands a Forth word to be executed. Often the most time-consuming part of writing a remote port is constructing the initial program to implement fetch, store and execute, but many modern microprocessors have integrated debugging features (such as the Motorola CPU32) that eliminate this task.[32]
Structure of the language
The basic data structure of Forth is the "dictionary" which maps "words" to executable code or named data structures. The dictionary is laid out in memory as a tree of linked lists with the links proceeding from the latest (most recently) defined word to the oldest, until a sentinel value, usually a NULL pointer, is found. A context switch causes a list search to start at a different leaf. A linked list search continues as the branch merges into the main trunk leading eventually back to the sentinel, the root. There can be several dictionaries. In rare cases such as meta-compilation a dictionary might be isolated and stand-alone. The effect resembles that of nesting namespaces and can overload keywords depending on the context.
A defined word generally consists of head and body with the head consisting of the name field (NF) and the link field (LF), and body consisting of the code field (CF) and the parameter field (PF).
Head and body of a dictionary entry are treated separately because they may not be contiguous. For example, when a Forth program is recompiled for a new platform, the head may remain on the compiling computer, while the body goes to the new platform. In some environments (such as embedded systems) the heads occupy memory unnecessarily. However, some cross-compilers may put heads in the target if the target itself is expected to support an interactive Forth.[33]
The exact format of a dictionary entry is not prescribed, and implementations vary.
Structure of the compiler
The compiler itself is not a monolithic program. It consists of Forth words visible to the system, and usable by a programmer. This allows a programmer to change the compiler's words for special purposes.
The "compile time" flag in the name field is set for words with "compile time" behavior. Most simple words execute the same code whether they are typed on a command line, or embedded in code. When compiling these, the compiler simply places code or a threaded pointer to the word.[28]
The classic examples of compile-time words are the control structures such as IF and WHILE. Almost all of Forth's control structures and almost all of its compiler are implemented as compile-time words. Apart from some rarely used control flow words only found in a few implementations, such as the conditional return word ?EXIT used in Ulrich Hoffmann's preForth,[34][35] all of Forth's control flow words are executed during compilation to compile various combinations of primitive words along with their branch addresses. For instance, IF and WHILE, and the words that match with those, set up BRANCH (unconditional branch) and ?BRANCH (pop a value off the stack, and branch if it is false). Counted loop control flow words work similarly but set up combinations of primitive words that work with a counter, and so on. During compilation, the data stack is used to support control structure balancing, nesting, and back-patching of branch addresses. The snippet:
...DUP6<IFDROP5ELSE1-THEN...
would often be compiled to the following sequence inside a definition:
...DUPLIT6<?BRANCH5DROPLIT5BRANCH3LIT1-...
The numbers after BRANCH represent relative jump addresses. LIT is the primitive word for pushing a "literal" number onto the data stack. (Faster, shorter code would be compiled using pointers to constants instead of LIT and embedded data, if any of the numbers involved have been separately defined as constants. There would be similar changes if yet other words were used instead of constants, and so on.)
Compilation state and interpretation state
The word : (colon) parses a name as a parameter, creates a dictionary entry (a colon definition) and enters compilation state. The interpreter continues to read space-delimited words from the user input device. If a word is found, the interpreter executes the compilation semantics associated with the word, instead of the interpretation semantics. The default compilation semantics of a word are to append its interpretation semantics to the current definition.[28]
The word ; (semi-colon) finishes the current definition and returns to interpretation state. It is an example of a word whose compilation semantics differ from the default. The interpretation semantics of ; (semi-colon), most control flow words, and several other words are undefined in ANS Forth, meaning that they must only be used inside of definitions and not on the interactive command line.[28]
The interpreter state can be changed manually with the words [ (left-bracket) and ] (right-bracket) which enter interpretation state or compilation state, respectively. These words can be used with the word LITERAL to calculate a value during a compilation and to insert the calculated value into the current colon definition. LITERAL has the compilation semantics to take an object from the data stack and to append semantics to the current colon definition to place that object on the data stack.
In ANS Forth, the current state of the interpreter can be read from the flagSTATE which contains the value true when in compilation state and false otherwise. This allows the implementation of so-called state-smart words with behavior that changes according to the current state of the interpreter.
Immediate words
The word IMMEDIATE marks the most recent colon definition as an immediate word, effectively replacing its compilation semantics with its interpretation semantics.[36] Immediate words are normally executed during compilation, not compiled, but this can be overridden by the programmer in either state. ; is an example of an immediate word. In ANS Forth, the word POSTPONE takes a name as a parameter and appends the compilation semantics of the named word to the current definition even if the word was marked immediate. Forth-83 defined separate words COMPILE and [COMPILE] to force the compilation of non-immediate and immediate words, respectively.
Instead of reserving space for an Immediate flag in every definition, some implementations of Forth use an Immediates Dictionary which is checked first when in compile mode.
Unnamed words and execution tokens
In ANS Forth, unnamed words can be defined with the word :NONAME which compiles the following words up to the next ; (semi-colon) and leaves an execution token on the data stack. The execution token provides an opaque handle for the compiled semantics, similar to the function pointers of the C programming language.
Execution tokens can be stored in variables. The word EXECUTE takes an execution token from the data stack and performs the associated semantics. The word COMPILE, (compile-comma) takes an execution token from the data stack and appends the associated semantics to the current definition.
The word ' (tick) takes the name of a word as a parameter and returns the execution token associated with that word on the data stack. In interpretation state, ' RANDOM-WORD EXECUTE is equivalent to RANDOM-WORD.[37]
Parsing words and comments
The words : (colon), POSTPONE, ' (tick) are examples of parsing words that take their arguments from the user input device instead of the data stack. Another example is the word ( (paren) which reads and ignores the following words up to and including the next right parenthesis and is used to place comments in a colon definition. Similarly, the word \ (backslash) is used for comments that continue to the end of the current line. To be parsed correctly, ( (paren) and \ (backslash) must be separated by whitespace from the following comment text.
Structure of code
In most Forth systems, the body of a code definition consists of either machine language, or some form of threaded code. The original Forth which follows the informal FIG standard (Forth Interest Group), is a TIL (Threaded Interpretive Language). This is also called indirect-threaded code, but direct-threaded and subroutine threaded Forths have also become popular in modern times. The fastest modern Forths, such as SwiftForth, VFX Forth, and iForth, compile Forth to native machine code.
Data objects
When a word is a variable or other data object, the CF points to the runtime code associated with the defining word that created it. A defining word has a characteristic "defining behavior" (creating a dictionary entry plus possibly allocating and initializing data space) and also specifies the behavior of an instance of the class of words constructed by this defining word. Examples include:
VARIABLE
Names an uninitialized, one-cell memory location. Instance behavior of a VARIABLE returns its address on the stack.
CONSTANT
Names a value (specified as an argument to CONSTANT). Instance behavior returns the value.
CREATE
Names a location; space may be allocated at this location, or it can be set to contain a string or other initialized value. Instance behavior returns the address of the beginning of this space.
Forth also provides a facility by which a programmer can define new application-specific defining words, specifying both a custom defining behavior and instance behavior. Some examples include circular buffers, named bits on an I/O port, and automatically indexed arrays.
Data objects defined by these and similar words are global in scope. The function provided by local variables in other languages is provided by the data stack in Forth (although Forth also has real local variables). Forth programming style uses very few named data objects compared with other languages; typically such data objects are used to contain data which is used by a number of words or tasks (in a multitasked implementation).[38]
Forth does not enforce consistency of data type usage; it is the programmer's responsibility to use appropriate operators to fetch and store values or perform other operations on data.
Examples
“Hello, World!”
:HELLO( -- )CR."Hello, World!";
HELLO <cr> Hello, World!
The word CR (Carriage Return) causes the output following CR to be displayed on a new line. The parsing word ." (dot-quote) reads a double-quote delimited string and appends code to the current definition so that the parsed string will be displayed upon execution. The space character separating the word ." from the string Hello, World! is not included as part of the string. It is needed so that the parser recognizes ." as a Forth word.
A standard Forth system is also an interpreter, and the same output can be obtained by typing the following code fragment into the Forth console:
CR.( Hello, World!)
.( (dot-paren) is an immediate word that parses a parenthesis-delimited string and displays it. As with the word ." the space character separating .( from Hello, World! is not part of the string.
The word CR comes before the text to print. By convention, the Forth interpreter does not start output on a new line. Also by convention, the interpreter waits for input at the end of the previous line, after an ok prompt. There is no implied "flush-buffer" action in Forth's CR, as sometimes is in other programming languages.
Mixing states of compiling and interpreting
Here is the definition of a word EMIT-Q which when executed emits the single character Q:
:EMIT-Q81( the ASCII value for the character 'Q' )EMIT;
This definition was written to use the ASCII value of the Q character (81) directly. The text between the parentheses is a comment and is ignored by the compiler. The word EMIT takes a value from the data stack and displays the corresponding character.
The following redefinition of EMIT-Q uses the words [ (left-bracket), ] (right-bracket), CHAR and LITERAL to temporarily switch to interpreter state, calculate the ASCII value of the Q character, return to compilation state and append the calculated value to the current colon definition:
:EMIT-Q[CHARQ]LITERALEMIT;
The parsing word CHAR takes a space-delimited word as parameter and places the value of its first character on the data stack. The word [CHAR] is an immediate version of CHAR. Using [CHAR], the example definition for EMIT-Q could be rewritten like this:
:EMIT-Q[CHAR]QEMIT;\ Emit the single character 'Q'
This definition used \ (backslash) for the describing comment.
Both CHAR and [CHAR] are predefined in ANS Forth. Using IMMEDIATE and POSTPONE, [CHAR] could have been defined like this:
:[CHAR]CHARPOSTPONELITERAL;IMMEDIATE
RC4 cipher program
In 1987, Ron Rivest developed the RC4 cipher-system for RSA Data Security, Inc. Its description follows:
We have an array of 256 bytes, all different. Every time the array is used it changes by swapping two bytes. The swaps are controlled by counters i and j, each initially 0. To get a new i, add 1. To get a new j, add the array byte at the new i. Exchange the array bytes at i and j. The code is the array byte at the sum of the array bytes at i and j. This is XORed with a byte of the plaintext to encrypt, or the ciphertext to decrypt. The array is initialized by first setting it to 0 through 255. Then step through it using i and j, getting the new j by adding to it the array byte at i and a key byte, and swapping the array bytes at i and j. Finally, i and j are set to 0. All additions are modulo 256.
The following Standard Forth version uses Core and Core Extension words only.
0valueii0valuejj0valueKeyAddr0valueKeyLencreateSArray256allot\ state array of 256 bytes:KeyArrayKeyLenmodKeyAddr;:get_byte+c@;:set_byte+c!;:as_byte255and;:reset_ij0TOii0TOjj;:i_update1+as_byteTOii;:j_updateiiSArrayget_byte+as_byteTOjj;:swap_s_ijjjSArrayget_byteiiSArrayget_bytejjSArrayset_byteiiSArrayset_byte;:rc4_init( KeyAddr KeyLen -- )256minTOKeyLenTOKeyAddr2560DOiiSArrayset_byteLOOPreset_ijBEGINiiKeyArrayget_bytejj+j_updateswap_s_ijii255<WHILEiii_updateREPEATreset_ij;:rc4_byteiii_updatejjj_updateswap_s_ijiiSArrayget_bytejjSArrayget_byte+as_byteSArrayget_bytexor;
This is one way to test the code:
hexcreateAKey61c,8Ac,63c,D2c,FBc,:testcr0DOrc4_byte.LOOPcr;AKey5rc4_init2CF94CEEDC5test\ output should be: F1 38 29 C9 DE
Implementations
Because Forth is simple to implement and has no standard reference implementation, there are numerous versions of the language. In addition to supporting the standard varieties of desktop computer systems (POSIX, Microsoft Windows, macOS), many of these Forth systems also target a variety of embedded systems. Listed here are some of the systems which conform to the 1994 ANS Forth standard.
ASYST, a Forth-like system for data collection and analysis [39]
↑ There are exceptions, such as Ulrich Hoffmann's preForth and Tom Zimmer's TCOM
Related Research Articles
In computing, a compiler is a computer program that translates computer code written in one programming language into another language. The name "compiler" is primarily used for programs that translate source code from a high-level programming language to a low-level programming language to create an executable program.
C is a general-purpose programming language. It was created in the 1970s by Dennis Ritchie and remains very widely used and influential. By design, C's features cleanly reflect the capabilities of the targeted CPUs. It has found lasting use in operating systems code, device drivers, and protocol stacks, but its use in application software has been decreasing. C is commonly used on computer architectures that range from the largest supercomputers to the smallest microcontrollers and embedded systems.
In computer science, an integer is a datum of integral data type, a data type that represents some range of mathematical integers. Integral data types may be of different sizes and may or may not be allowed to contain negative values. Integers are commonly represented in a computer as a group of binary digits (bits). The size of the grouping varies so the set of integer sizes available varies between different types of computers. Computer hardware nearly always provides a way to represent a processor register or memory address as an integer.
A programming language is a system of notation for writing computer programs. Programming languages are described in terms of their syntax (form) and semantics (meaning), usually defined by a formal language. Languages usually provide features such as a type system, variables, and mechanisms for error handling. An implementation of a programming language is required in order to execute programs, namely an interpreter or a compiler. An interpreter directly executes the source code, while a compiler produces an executable program.
Rebol is a cross-platform data exchange language and a multi-paradigm dynamic programming language designed by Carl Sassenrath for network communications and distributed computing. It introduces the concept of dialecting: small, optimized, domain-specific languages for code and data, which is also the most notable property of the language according to its designer Carl Sassenrath:
Although it can be used for programming, writing functions, and performing processes, its greatest strength is the ability to easily create domain-specific languages or dialects
In computer science, threaded code is a programming technique where the code has a form that essentially consists entirely of calls to subroutines. It is often used in compilers, which may generate code in that form or be implemented in that form themselves. The code may be processed by an interpreter or it may simply be a sequence of machine code call instructions.
In computer science, an interpreter is a computer program that directly executes instructions written in a programming or scripting language, without requiring them previously to have been compiled into a machine language program. An interpreter generally uses one of the following strategies for program execution:
Parse the source code and perform its behavior directly;
Translate source code into some efficient intermediate representation or object code and immediately execute that;
Explicitly execute stored precompiled bytecode made by a compiler and matched with the interpreter's virtual machine.
In computer science, a compiler-compiler or compiler generator is a programming tool that creates a parser, interpreter, or compiler from some form of formal description of a programming language and machine.
Bytecode is a form of instruction set designed for efficient execution by a software interpreter. Unlike human-readable source code, bytecodes are compact numeric codes, constants, and references that encode the result of compiler parsing and performing semantic analysis of things like type, scope, and nesting depths of program objects.
In computer science and computer programming, a data type is a collection or grouping of data values, usually specified by a set of possible values, a set of allowed operations on these values, and/or a representation of these values as machine types. A data type specification in a program constrains the possible values that an expression, such as a variable or a function call, might take. On literal data, it tells the compiler or interpreter how the programmer intends to use the data. Most programming languages support basic data types of integer numbers, floating-point numbers, characters and Booleans.
Parsing, syntax analysis, or syntactic analysis is the process of analyzing a string of symbols, either in natural language, computer languages or data structures, conforming to the rules of a formal grammar. The term parsing comes from Latin pars (orationis), meaning part.
colorForth is a programming language from the Forth language's creator, Charles H. Moore, developed in the 1990s. The language combines elements of Moore's earlier Forth systems and adds color as a way of indicating how words should be interpreted. Program text is tokenized as it is edited; the compiler operates on the tokenized form, so there is less work at compile time.
In computer science, a pointer is an object in many programming languages that stores a memory address. This can be that of another value located in computer memory, or in some cases, that of memory-mapped computer hardware. A pointer references a location in memory, and obtaining the value stored at that location is known as dereferencing the pointer. As an analogy, a page number in a book's index could be considered a pointer to the corresponding page; dereferencing such a pointer would be done by flipping to the page with the given page number and reading the text found on that page. The actual format and content of a pointer variable is dependent on the underlying computer architecture.
Factor is a stack-oriented programming language created by Slava Pestov. Factor is dynamically typed and has automatic memory management, as well as powerful metaprogramming features. The language has a single implementation featuring a self-hosted optimizing compiler and an interactive development environment. The Factor distribution includes a large standard library.
In computer science, extensible programming is a style of computer programming that focuses on mechanisms to extend the programming language, compiler, and runtime system (environment). Extensible programming languages, supporting this style of programming, were an active area of work in the 1960s, but the movement was marginalized in the 1970s. Extensible programming has become a topic of renewed interest in the 21st century.
The computer programming languages C and Pascal have similar times of origin, influences, and purposes. Both were used to design their own compilers early in their lifetimes. The original Pascal definition appeared in 1969 and a first compiler in 1970. The first version of C appeared in 1972.
Data structure alignment is the way data is arranged and accessed in computer memory. It consists of three separate but related issues: data alignment, data structure padding, and packing.
sizeof is a unary operator in the programming languages C and C++. It generates the storage size of an expression or a data type, measured in the number of char-sized units. Consequently, the construct sizeof (char) is guaranteed to be 1. The actual number of bits of type char is specified by the preprocessor macro CHAR_BIT, defined in the standard include file limits.h. On most modern computing platforms this is eight bits. The result of sizeof has an unsigned integer type that is usually denoted by size_t.
In computing, a compiler is a computer program that transforms source code written in a programming language or computer language, into another computer language. The most common reason for transforming source code is to create an executable program.
Seed7 is an extensible general-purpose programming language designed by Thomas Mertes. It is syntactically similar to Pascal and Ada. Along with many other features, it provides an extension mechanism. Seed7 supports introducing new syntax elements and their semantics into the language, and allows new language constructs to be defined and written in Seed7. For example, programmers can introduce syntax and semantics of new statements and user defined operator symbols. The implementation of Seed7 differs significantly from that of languages with hard-coded syntax and semantics.
References
1 2 Maher, Jimmy (October 28, 2014). "Starflight". The Digital Antiquarian. Retrieved April 29, 2023.
1 2 3 Rather, Elizabeth D.; Colburn, Donald R.; Moore, Charles H. (1996) [1993]. "The evolution of Forth". In Bergin, Thomas J.; Gibson, Richard G. (eds.). History of programming languages---II. Association for Computing Machinery. pp.625–670. doi:10.1145/234286.1057832. ISBN0201895021.
↑ "Under The Hood". Brodie 1987. p.241. To summarize, there are three kinds of variables: System variables contain values used by the entire Forth system. User variables contain values that are unique for each task, even though the definitions can be used by all tasks in the system. Regular variables can be accessible either system-wide or within a single task only, depending upon whether they are defined within OPERATOR or within a private task.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
