General Bronze Corporation

Last updated

General Bronze Corporation
Industry Metal fabrication
Metal working
Founded1931;93 years ago (1931) as General Bronze Corporation
Founder John Polachek
Defunct1967;57 years ago (1967)
FateAcquired by Allied Products Corporation of Chicago, IL in 1967, various divisions sold or liquidated, with trademark and patent rights sold in 1967.
Headquarters Long Island City, New York, US
Key people
John Polachek, Aaron Saphier, Milton Salmon, A. Walter Nelson, Warren Freeman
Products Metal fabrication
Metalworking
Beams
Girders
Antennas
Aluminum windows
Bronze
TV station equipment:
TV broadcast antennas
Divisions Brach Manufacturing Company of Newark, New Jersey, Roman Bronze Works

The General Bronze Corporation (also known as General Bronze or GBC) was an American metals fabricator, primarily of bronze and aluminum, and the most recognized company in the architectural bronze and aluminum industry during the first half of the 20th century. [1] [2] [3] [4] [5] It was known for New York City's Seagram Building [6] on Park Avenue designed by Mies van der Rohe, the Atlas [7] and Prometheus [7] bronze sculptures in Rockefeller Center, the bronze doors for the United States Supreme Court, [8] Commerce, and Department of Justice Buildings in Washington, DC, [1] the aluminum windows for the United Nations Secretariat Building [9] [10] and Chase Manhattan Bank Building, [11] and for the design of the Arecibo Radio Telescope suspension system. [12] As American cities evolved, the need for architectural and sculptural bronze increased. An innovative and progressive company, General Bronze Corporation stepped up to supply that demand. It became the dominant leader in the architectural bronze industry for both bronze fabrication and bronze sculpture, and aluminum fabrication in the United States for over three decades. [1] In the early 1950s, General Bronze was also at the forefront of the fledgling television radio industry as a major manufacturer of radio antennas, and one of the first to introduce automatic motorized antennas for the automobile industry. [13] General Bronze's Brach Manufacturing subdivision offered electronics to the early radio telescope field, such as the Green Bank Telescope of the National Radio Astronomy Observatory in Green Bank, West Virginia [14] [15] and the Arecibo Radio Telescope. [12]

Contents

Overextending their resources by diverting capital from bronze manufacturing to antenna and radio telescope research, concomitant with the declining use of bronze in the construction industry due to changes in architectural style, eclipsed General Bronze's main focus leading to their ultimate demise. [16] In 1967, they were acquired by Allied Products of Chicago, IL, and ceased to exist. [17] [18] [19]

History and establishment

General Bronze Corporation was founded as a reorganization of the John Polachek Bronze and Iron Company, founded in 1910 by John Polachek, a Hungarian immigrant. [20] [5] He became a supervisor overseeing bronze manufacturing at the Tiffany Glass Studios in Corona, Queens New York, which served as the basis for his future enterprise in bronze fabrication. [21]

Louis C. Tiffany Louis Comfort Tiffany c. 1908.jpg
Louis C. Tiffany

Tiffany Glass Studios, made famous by Louis C. Tiffany commonly referred to his product as favrile glass or " Tiffany glass ," and used bronze in their artisan work for his Tiffany lamps. [22] [23] [24] [25] [1] [5] In 1910, Polachek left Tiffany Glass Studios and opened his own bronze architectural company called the John Polachek Bronze Company. In 1912 he purchased a 1.75 acre site in Long Island City, Queens at 34–19 Tenth Street and grew it into one of the most important bronze fabricators in the field. In 1927, Polachek merged his new company with another metals fabricator, the Renaissance Bronze and Iron Works located in Long Island City, Queens. [5] The new company became known as the General Bronze Corporation. In 1934, General Bronze Corporation was the largest company in the architectural bronze industry in the United States, employing a combined total of 1,200 workers from General Bronze, Renaissance Bronze and Iron Works, and Tiffany Studios with assets over $5 million. [1] [5]

Polachek's grand idea was to become the leader in the use of bronze for metal fabrication as he foresaw the worldwide demand for the metal alloy would only increase. This was due to a rise in the use of bronze in the architectural and art world, and Polachek leaped at the opportunity. [5] The sought-after metal coincided with the timing of the art-deco, art nouveau, and international art movements, in which it became popular to use bronze. Polachek's intuition paid off, as he cornered the bronze fabrication market. Bronze and aluminum became popular to use and were implemented in art, architecture, and the construction industry by artists, architects, and construction companies respectively. As General Bronze gained notoriety, the company quickly became the forerunner. [7] [16] General Bronze's most acclaimed entry to the construction industry was the bronze mullion I-beams for the Seagram Building, [26] [27] [6] the no-set-back windows clad in aluminum for the United Nations Secretariat Building, [10] [9] [28] and the Chase Manhattan Bank Building. [29] [30] [11]

The company purchased the Brach Manufacturing Company of Newark, New Jersey, as one of its subsidiaries in the 1950s. [31] General Bronze (GBC) intended to become a pioneer in the development of TV antennas. [32] During this period, GBC was closely identified with the leadership of Aaron Saphier. [33] He became general manager after the company's founding, and served as president from 1931 to 1959, remaining active as chairman of the board until the end of 1960. [1]

During the 1930s through 1950s, the General Bronze Corporation's leadership as one of America's leaders in metals and especially the architectural bronze industry began to weaken as General Bronze expanded beyond their main focus with their developing interest in marketing consumer communications with antennas, as well as aluminum-manufactured products. [32] [34] As General Bronze began to face increasing domestic competition from international electronics firms like RCA, Sony, Philips, Matsushita and Mitsubishi, they continued primarily manufacturing aluminum windows, that which they were known for on prior construction projects, such as the Tripler Army Base Hospital in Hawaii. [34] Although General Bronze's division for manufacturing aluminum windows for the American construction industry climbed after World War II, they suffered enormous financial losses and other failed projects including the loss of existing contracts with metal fabrication partners. This occurred simultaneously with the waning use of architectural bronze and the failed attempts to secure a bid for both the Arecibo Radio Telescope and the Green Bank Telescope in Green Bank, WV. The company slowly rebounded by the early 1960s, but never regained its former status. General Bronze was eventually acquired by Allied Products Corporation of Chicago in 1967, a company which was once owned by Jay Pritzker, the uncle of present Illinois governor J.B. Pritzker. [17] [18]

General Bronze Subsidiaries

Bronze art

Atlas in the International Building's plaza New York City, May 2014 - 033.JPG
Atlas in the International Building's plaza

The General Bronze Corporation, with the acquisition of the Roman Bronze Works, became the primary company behind many of America's most famous buildings and sculptures. [7] [35] Early man has used bronze throughout history. In the ancient Mayan, Egyptian, Greek, and Roman ruins, bronze tools, instruments, statues, and weapons has always been found in an almost perfect state of preservation. [35] "Centuries hence there will undoubtedly be many fine works of bronze that will bear eloquent testimony to craftsmanship of our day." [35]

Prometheus (1934) Rockefeller Center 2 (New York) (44331718505).jpg
Prometheus (1934)

The world's most acclaimed sculptors produced some of the finest works seen in the United States by General Bronze. "Many visitors to Rockefeller Center have always admired the bronze statuary which helped make it one of the wonders of the modern world, such as the art deco Atlas by Lee Lawrie, and the Prometheus by Paul Manship." [35] Other well-known and exceptional Rockefeller Center sculptures admired worldwide are on display for visitors to marvel and take photographs. These include the whimsical fountain figures by Rene Chambellan adorning the fountain flanking Manship's Prometheus statue; Lawrie's Atlas sculpture in the plaza of Rockefeller Center's International Building at its 5th Avenue entrance; and the aluminum "Spirit of the Dance" of William Zorach at Rockefeller Center's Radio City Music Hall, New York. [36]

A promenade fountain by Rene Paul Chambellan at Rockefeller Center RPC0058.jpg
A promenade fountain by Rene Paul Chambellan at Rockefeller Center

Roman Bronze Works

The General Bronze Corporation became the leader of the most famous bronze sculptures of the 20th Century, most notably after its acquisition of the Roman Bronze Works. [7] [37] The Roman Bronze Works "had seen many of America's greatest sculptors." [7] The General Bronze Corporation purchased the Roman Bronze Works in 1928. This ownership lasted for twenty years, up until 1948. [25] General Bronze's newly purchased foundry produced “virtually all of the sculpture for Rockefeller Center, numerous national monuments, and many sculptures for the W.P.A, in addition to its usual complement of private commissions." [7] The Roman Bronze works excelled in the lost-wax casting method and permitted large works to be cast in one piece. Most of the sculptures at Rockefeller Center, like the statues of Prometheus and Atlas, were cast at the Corona, Queens building. [25]

Early on, the Roman Bronze Works’ use of the lost-wax casting technique, was eyed by Polachek as he once worked there. [1] Begun in 1899 by Riccardo Bertelli, an immigrant who attained technical knowledge of European methods of casting bronze in wax from his native Genoa, Italy, flourished under his management while casting primarily art sculpture. [23] In 1928, the prized foundry was purchased by John Polachek of General Bronze, not only for its workers and workmanship but for the sizable physical plant in Corona, Queens. [25] It was then purchased by General Bronze Corporation and became a subsidiary. [25] Under General Bronze's leadership, Roman Bronze Works produced America's finest patriotic monuments, statues, and most ornate public doors. [7] The factory was the old Tiffany Studios in Corona, Queens, at the southwest corner of 43rd Avenue and 97th place, where it was used to cast art sculptures of bronze designs for sculptors, and bronze architectural elements such as floor registers, door jambs, window casings, lamps, and sconces, most notably for Tiffany. [23]

Tiffany's Wisteria table lamp with bronze base Wisteria Tiffany Studios Lamp.jpg
Tiffany's Wisteria table lamp with bronze base

The building had undergone a metamorphosis of name changes, beginning with the Tiffany Glass and Decorating Company, in 1892. Arthur J. Nash, apparently became Tiffany's partner, as Nash applied the favrile glass technique learned from his hometown of Stourbridge, England to the glassworks produced by Tiffany. [23] Thereafter, its name evolved from being called the Stourbridge Glass Company in 1893 (in deference to the technique learned from Nash's hometown), to the Tiffany Glass Furnaces, and finally to the Tiffany Studios. Stourbridge Glass Company was absorbed by Tiffany into the Tiffany Furnaces in 1902. "Within this complex, Tiffany carried out experiments in glass colors and pottery glazing, perfected techniques of assembling stained glass windows." [23] “By 1901, Tiffany was at the peak of his profession. But Tiffany's glass fell out of favor in the 1910s, and by the 1920s a foundry had been installed for a separate bronze company. In 1932 Tiffany Studios filed for bankruptcy. Ownership of the complex passed back to the Roman Bronze Works, which had served as a subcontractor to Tiffany in prior years.” [24] [22] [38] In 1948, General Bronze relinquished ownership of the Roman Bronze Works foundry and was brought back under family control rather than remaining corporate. General Bronze Corporation sold off the subsidiary to a family member of a prior employee of the Roman Bronze Works to the Schiavo family, who had once been employed by Roman Bronze Works. [25]

US Supreme Court Building's massive bronze doors by Gilbert Donnelly, Sr., and his son John Donnelly, Jr. United States Supreme Court Building Front Door photo Don Ramey Logan.jpg
US Supreme Court Building's massive bronze doors by Gilbert Donnelly, Sr., and his son John Donnelly, Jr.

The largest and most ornate bronze fountain known to be cast in the world was by the Roman Bronze Works and General Bronze Corporation in 1952. The material used for the fountain, known as statuary bronze, is a quaternary alloy made of copper, zinc, tin, and lead, and traditionally golden brown in color. This was made for the Andrew W. Mellon Memorial in Federal Triangle in Washington, DC. [39] Another example of the massive, ornate design projects attributed to General Bronze/Roman Bronze Works were the massive doors to the United States Supreme Court Building in Washington, DC. [40]

Architectural Bronze and Metals

When the United States entered World War II in December 1941, the federal government required metal for use in the war effort. General Bronze Corporation began assisting in the manufacture of weapons, such as machine gun emplacements. [41] General Bronze became a major manufacturer to the American war effort. [42] Upon its founding, General Bronze Corporation was one of the largest metal fabricators in New York City. [16] [41]

Seagram Building

The Seagram Building viewed from across Park Avenue at 52nd Street Seagram Building (6268045534).jpg
The Seagram Building viewed from across Park Avenue at 52nd Street

The Seagram Building on New York City's Park Avenue remains the "iconic glass box sheathed in bronze, designed by Mies van der Rohe." [27] To supply the demand for bronze required for the construction, the General Bronze Corporation fabricated 3,200,000 pounds (1,600 tons) at its plant in Garden City, New York. [6]

Seagram Building's columns and bays at the lobby's northwestern corner Park Av May 2022 44.jpg
Seagram Building's columns and bays at the lobby's northwestern corner

The building "exuded transparency, as an expression of Mies van der Rohe's near-mystic faith in structure as the foundation of architecture." [43] The Seagram Building is a 38-story, 516-foot bronze-and-topaz-tinted glass slab, in the purest expression of Mies van der Rohe style, where 27-foot bays or recessed areas offer the eye a perfect Cartesian grid. [27] The building looks like a "squarish 38-story tower clad in a restrained curtain wall of metal and glass." [26] Structural columns form bays that are divided by "extruded bronze-covered I-beam mullions, which run the entire length of the façade." [27] The most interesting fact about the Seagram Building is that it was the first time that an entire building was sheathed in bronze. [6] Another interesting fact was that New York City's zoning laws were reconfigured for the Seagram Building, so that setbacks were no longer required. "This proved to be a no-setback building but a building all set back," [26] since the entire building was set back 100 feet from Park Avenue. "Bronze was selected because of its color, both before and after aging, its corrosion resistance, and its extrusion properties." [43] The extrusion process, where malleable metal is "forced through dies by pressure produced the bronze mullions — vertical lines between windows," [43] set the Seagram Building apart from all other buildings worldwide. The effect Mies van der Rohe obtained was the "sharp edges" between the glass and the bronze. [43] "One is as much aware of the metal as of the glass that forms most of the building's walls." [43] This produced the desired design by Mies van der Rohe. It was not only the most expensive building of its time — $36 million — but it was the first building in the world with floor-to-ceiling glass walls. [29] Mies van der Rohe achieved the crips edges that were custom-made with specific detailing by General Bronze [6] [43] and "even the screws that hold in the fixed glass-plate windows are made of brass." [27] William Jordy, an acclaimed architectural historian, said that the Seagram Building was "the first metal-and-glass skyscraper consciously designed to age as masonry buildings age—as appropriate for Seagram's whisky, as sheen to Lever's soap." [27]

United Nations Secretariat Building

Western or front view of U.N. Secretariat, reflecting 1st Avenue buildings on the sheer face of the glass facade in classic postwar International design UNO New York.JPG
Western or front view of U.N. Secretariat, reflecting 1st Avenue buildings on the sheer face of the glass façade in classic postwar International design

It was remarked early on that the United Nations Secretariat Building was the world's largest window. [28] It was 287 feet wide and 544 feet tall, described as "two great windows (front, or western exposure, and back, or eastern sides of the building), framed in Vermont marble." [28] General Bronze Corporation manufactured and supplied the building with 5400 individual windows, spandrel frames, louvers, and architectural metalwork since at that time it was the world's largest fabricator of aluminum and other non-ferrous metals. [9] The land had been donated by the Rockefeller family, the old slaughterhouse district along the East River bordered by First Avenue between East 41st and East 47th Streets. [28] The most important building in the UN Plaza was the UN Secretariat Building, overshadowing the UN General Assembly Building. The group of architects, overseen by a lead architect, was Wallace Harrison. He coordinated an international group of designers which included Sven Markelius, Le Corbusier, and Oscar Niemeyer. [10]

The East River site for the U.N, extending some 1500 feet from 42nd to 48th Streets, from First Avenue to the edge of the East River, had a "sufficient scale for applying the fundamental elements of modern urbanism, sunlight, and verdure. [9] Protected, yet given spaciousness by the wide expanse of the East River, the site has breadth enough to be made a living unit of strength, dignity, and harmony, befitting a building which embodied the world." [9] Although located in New York City, the land the U.N. rents is strictly under the administration of the U.N. and extraterritorial by a treaty with the U.S. Government. The Secretariat Building dwarfs the General Assembly Building and contains executive offices for the Secretary General, the Deputy Secretary General and the Under-Secretary-General of the U.N.; offices for the major U. N. Councils; many general business offices: legal department, public information, transportation, translators, interpreters, typing pools, dining rooms, places of worship, etc.

Flags of the member states of the U.N. UN Members Flags2.JPG
Flags of the member states of the U.N.

The vast aluminum windows manufactured by General Bronze on the east and west building walls are cantilevered beyond the structural steel columns and are supported within the light aluminum framework on double-hung aluminum sashes and fitted with blue-green heat-absorbing plate glass. [9] The iconic building sits as a testament to world unity. [28] Wallace Harrison "insisted that air-conditioning was its cornerstone, unlike Le Corbusier, who wanted windows that could be opened. General Bronze manufactured the windows from Harrison's innovative design, "a curtain wall catilevered two feet, nine inches, in front of the steel structure so that it formed a flush skin of blue-green Thermopane heat-absorbing glass, painted black on the inner face." [28] The International Style design, much like the Seagram Building, "represented postwar (World War II) prosperity; for Europe it was a chance to rebuild; and for developing countries it stood for a brighter future. [9] [10] [28]

Chase Manhattan Bank Building

Looking up at Chase Manhattan Bank from the plaza One Chase Manhattan Plaza.jpg
Looking up at Chase Manhattan Bank from the plaza

The Chase Manhattan Bank Building, once known as One Chase Manhattan Plaza, at 28 Liberty Street, is a "sheer, 60-story, 813-foot-tall aluminum-and-glass-sheathed tower which contains 1.8 million square feet." [29] "The General Bronze Corporation engineered and manufactured the ¼ inch-thick aluminum panels — some as tall as 13 feet — which enclose the perimeter piers, as well as the extruded H-shaped aluminum mullions that flank the windows. [11] [30] General Bronze assured that the "aluminum panels would be recessed flush with the inside faces of the huge (2-foot, 10-inch by 4-foot, 11-inch) aluminum-sheathed columns." The curtain wall consists of a 4-foot 7-inch-high, two-tone aluminum spandrel and sill panel and an 8-foot-high window of clear glass. All of the natural-finished aluminum has a matte texture, as does the narrow black-anodized aluminum sill panel. Each bay is subdivided by five extruded aluminum mullions which are spaced 4 feet, 10 inches on center concerning each other and to the structural columns." [30] Skidmore, Owings & Merrill built the present structure, where the "shining, anodized-aluminum skin stood out among the dark towers of Wall Street like a newly minted coin." [29] The Chase Manhattan Bank Building was built on the first commercial "superblock" in New York ever since John D. Rockefeller Jr. developed Rockefeller Center. [30] It was Rockefeller's money that "revitalized New York's financial district and paved the way for other Lower Manhattan projects like the World Trade Center and the South Street Seaport." [29] The building was constructed after a change in New York City's building and zoning laws so that the area was large enough for Skidmore, Owings & Merrill to accommodate the building. The political method employed was a "demapping" (literally, removing a street from the city plan) of Lower Manhattan. [29] " The building sits on a two-and-a-half-acre plot after Cedar Street was removed, "to form a superblock, bordered by Pine, Liberty, William, and Nassau Streets. [30] [29] The Chase Manhattan Building, the trademark for David Rockefeller and the empire forged by his grandfather John D. Rockefeller, rise "60 steel-ribbed stories out of the dark canyons of the financial district, the great glass and aluminum slab of the Chase Manhattan Bank stands at 813 feet, the sixth tallest building in the city and the world," [30] in 1961. There are 2,239,530 square feet of gross floor area, and "is the largest banking operation ever assembled under one roof, costing $813 million, the largest total investment in a building of its type, and detail for detail, in overall quality as well as outright size, one of the most remarkable planning, architectural, and engineering accomplishments," [30] at the time it was built.

L.S. Brach Manufacturing Corporation and Antennas

The radio industry had been making technical advances, particularly in the area of antenna technology, and instituted antenna design/model production for the MIT Lincoln Laboratory at Massachusetts Institute of Technology, NASA, and the Bureau of Standards. [32] Since General Bronze has enormous access to the aluminum industry, it pursued the acquisition of L.S. Brach Manufacturing Corporation [44] in 1948 to gain a foothold in the field of radio technology and Brach's patents. [31] Ira Kamen became the director of the Brach Manufacturing Corporation, while George Doundoulakis became the Director of Research. Kamen had hired Doundoulakis at the RCA Institutes in New York City. Doundoulakis had experience working on the DEW Line system earlier. [45] Kamen believed that with his expertise and Doundoulakis' energy, they both would forge ahead and seek to gain contracts in the expanding field of radio telescopes. Doundoulakis had been tutored by Kamen, an electrical engineer, in New York City who taught at the RCA Institutes. Doundoulakis, a physicist, had gained a solid foothold in the field of electronics and was encouraged by Kamen to also teach at the RCA Institutes. Subsequently, in 1956, both Doundoulakis and Kamen filed their first US patent. [46] Later, Doundoulakis and Kamen co-authored a book on "Scatter Propagation." [45] Doundoulakis hired Stanley Gethen, and together, both filed patents for antenna designs and radar-related projects for General Bronze. [47] [48] Brach Electronics had developed antennas for the automobile industry, which included motorized antennas. [49] [13]

National Radio Astronomy Observatory – Green Bank, WV

Green Bank Radio Telescope Green Bank 100m diameter Radio Telescope.jpg
Green Bank Radio Telescope

General Bronze Corporation's (GBC) Brach subsidiary had been interested in radio telescope research in addition to automobile and boat antennas. GBC was requested, and then bid for the construction of the 90-foot and the 140-foot radio telescopes in Green Bank, VA, for the National Radio Astronomy Observatory (NRAO). [15] The plans submitted from General Bronze include details of the bid. [14] The Green Bank, WV, antennas were managed by the Associated Universities Incorporated (AUI), a consortium of scientists, initially from nine northeastern universities, dedicated to developing and building scientific tools for the community. [32] GBC submitted design proposals for both the 85-foot and 140-foot radio telescopes. Ira Kamen, as director of the Brach subdivision was in direct communication with Richard Emberson, who was the assistant to the president of AUI at the founding of the National Radio Astronomy Observatory. In 1957, he became the project manager for the development of Green Bank, West Virginia radio telescopes. Kamen worked with the AUI, the overseeing entity between the National Science Foundation (NSF) and the NRAO at Green Bank. General Bronze's technical drawings, photographs, and correspondence in 1957–58, at the outset of the design and construction of the Green Bank Telescopes are referenced. [14] [15] However, GBC's bid was not accepted as a contractor for either the 85-foot or the 140-foot radio projects.

Arecibo Radio Telescope

The Arecibo Radio Telescope in 2019 Arecibo radio telescope SJU 06 2019 6144.jpg
The Arecibo Radio Telescope in 2019

On the day the project for the design and construction of the Arecibo Radio telescope was announced at Cornell University, Professor William Gordon of the electrical engineering department envisioned a 133 m (435 ft) single tower centered in a 305 m (1,000 ft) reflector to support an antenna feed. He proposed that this antenna would "be fed from a horn on a high tower." [50] [51] [52] [53] Gordon also suggested a tripod or four-legged design similar to the arches of the St. Louis Gateway Arch to suspend the antenna feed. [50] Subsequently, Cornell University and Zachary Sears published a request for proposal (RFP) requesting a design to support an antenna feed moving along a spherical surface 133 metres (435 ft) above a stationary reflector. The RFP recommended to those chosen antenna companies that a tripod or a tower in the center to support an antenna feed was conceptualised by Gordon. [51] [50] [52]

The RFP was mailed out to all major antenna companies/researchers in the field. George Doundoulakis received the RFP from Aaron Saphier, CEO of General Bronze Corporation. GBC had previously submitted proposals for the radio telescope at Green Bank, WV under the auspices of the National Radio Astronomy Observatory from GBC's Brach subdivision. [32] General Bronze presented their proposal in the final round in December 1959, in Ithaca, New York at Cornell for their antenna suspension design RFPs. [12] Doundoulakis had studied the idea of suspending the feed with his brother, Helias Doundoulakis, a civil engineer who received his master's thesis in bridge suspension from Brooklyn Polytechnic. [52] [54] George Doundoulakis recognised that Gordon's idea of supporting the proposed radio telescope's antenna feed from a tower, tripod, or four-legged structure around the center, (the most crucial area of the reflector), would severely limit the reception of radio waves. [50] George Doundoulakis thought of a more practical way of suspending the antenna feed — by cables from four towers – thereby eliminating the problem of a "high" tower in the center of the reflector. Both George and Helias Doundoulakis told professors Gordon and Gold at the RFP meetings on 14 December 1959 "General Bronze Corporation proposes a radical departure from the other companies: two suspension bridges perpendicular to one another which will double for an antenna." [12] He presented this proposal to Cornell University for his idea for three-and-a-half hours, while other companies were given 45 minutes. [12] They explained how the antenna feed would hang at the intersection of two suspension bridges — in turn, supported by four towers — by a doughnut or torus-type truss attached to the antenna feed." [12] Doundoulakis informed Professors Gordon and Gold that the tower/tripod/four-legged designs, compared to his towers/suspension bridge idea, were major engineering challenges with high construction costs. [12] [51] Helias Doundoulakis designed the cable suspension system – with assignees William J. Casey and Constantine Michalos – that was finally adopted. It is essentially the same design as in the original drawings by Doundoulakis – although configured with three towers rather than four towers in Doundoulakis, Michalos, and Casey's patent. [55]

Controversy arose after Helias Doundoulakis, Constantine Michalos, and William J. Casey (CIA director under President Ronald Reagan) discovered the suspension design was used by Cornell University without their permission as exclusive patent holders. [55] [12] They subsequently filed a lawsuit, originally for $1.2 million but was settled for $10,000 because "the defense in a court trial would cost far more than the $10,000 for which the case was settled," and accordingly, on April 11, 1975, Doundoulakis v. U.S. (Case 412–72) had been ruled in plaintiff's favor by the United States Court of Federal Claims, that "(a) a judgment has been entered in favor of the plaintiffs Helias Doundoulakis, William J. Casey, and Constantine Michalos against the United States and (b) in consideration of the sum of $10,000 to be paid by the United States Government to the plaintiff, the plaintiffs grants to the United States Government an irrevocable, fully-paid, non-exclusive license under the aforesaid U.S. Patent No. 3, 273, 156 to Cornell University." [12]

See also

Related Research Articles

<span class="mw-page-title-main">Bronze</span> Alloy of copper and tin

Bronze is an alloy consisting primarily of copper, commonly with about 12–12.5% tin and often with the addition of other metals and sometimes non-metals, such as phosphorus, or metalloids such as arsenic or silicon. These additions produce a range of alloys that may be harder than copper alone, or have other useful properties, such as strength, ductility, or machinability.

<span class="mw-page-title-main">Ludwig Mies van der Rohe</span> German-American architect (1886–1969)

Ludwig Mies van der Rohe was a German-American architect, academic, and interior designer. He was commonly referred to as Mies, his surname. He is regarded as one of the pioneers of modern architecture.

<span class="mw-page-title-main">Philip Johnson</span> American architect (1906–2005)

Philip Cortelyou Johnson was an American architect who designed modern and postmodern architecture. Among his best-known designs are his modernist Glass House in New Canaan, Connecticut; the postmodern 550 Madison Avenue in New York City, designed for AT&T; 190 South La Salle Street in Chicago; the Sculpture Garden of the Museum of Modern Art; and the Pre-Columbian Pavilion at Dumbarton Oaks. In his obituary, The New York Times wrote in January 2005 that his works "were widely considered among the architectural masterpieces of the 20th century."

<span class="mw-page-title-main">Louis Comfort Tiffany</span> American stained glass and jewelry designer (1848–1933)

Louis Comfort Tiffany was an American artist and designer who worked in the decorative arts and is best known for his work in stained glass. He is associated with the art nouveau and aesthetic art movements. He was affiliated with a prestigious collaborative of designers known as the Associated Artists, which included Lockwood de Forest, Candace Wheeler, and Samuel Colman. Tiffany designed stained glass windows and lamps, glass mosaics, blown glass, ceramics, jewellery, enamels, and metalwork. He was the first design director at his family company, Tiffany & Co., founded by his father Charles Lewis Tiffany.

<span class="mw-page-title-main">Seagram Building</span> Office skyscraper in Manhattan, New York

The Seagram Building is a skyscraper at 375 Park Avenue, between 52nd and 53rd Streets, in the Midtown Manhattan neighborhood of New York City. Designed by Ludwig Mies van der Rohe along with Philip Johnson, Ely Jacques Kahn, and Robert Allan Jacobs, the high-rise tower is 515 feet (157 m) tall with 38 stories. The International Style building, completed in 1958, initially served as the headquarters of the Seagram Company, a Canadian distiller.

<span class="mw-page-title-main">30 Rockefeller Plaza</span> Office skyscraper in Manhattan, New York

30 Rockefeller Plaza is a skyscraper that forms the centerpiece of Rockefeller Center in the Midtown Manhattan neighborhood of New York City, United States. Completed in 1933, the 66-story, 850 ft (260 m) building was designed in the Art Deco style by Raymond Hood, Rockefeller Center's lead architect. 30 Rockefeller Plaza was known for its main tenant, the Radio Corporation of America (RCA), from its opening in 1933 until 1988 and then for General Electric until 2015, when it was renamed for its current owner, Comcast. The building also houses the headquarters and New York studios of television network NBC; the headquarters is sometimes called 30 Rock, a nickname that inspired the NBC sitcom of the same name. The tallest structure in Rockefeller Center, the building is the 28th tallest in New York City and the 65th tallest in the United States, and was the third tallest building in the world when it opened.

<span class="mw-page-title-main">Tripler Army Medical Center</span> Hospital in Honolulu, Hawaiʻi

Tripler Army Medical Center (TAMC) is a major United States Department of Defense medical facility administered by the United States Army in the state of Hawaii. It is the tertiary care hospital in the Pacific Rim, serving local active and retired military personnel along with residents of nine U.S. jurisdictions and forces deployed in more than 40 other countries in the region. Located on the slopes of Moanalua Ridge overlooking the Honolulu neighborhoods of Moanalua and Salt Lake, Tripler Army Medical Center's massive coral pink structure can be seen from any point in the Honolulu District. It also serves as headquarters of the Regional Health Command - Pacific.The main hospital facility is within the Honolulu census-designated place.

<span class="mw-page-title-main">Westmount Square</span> Residential and office complex in Westmount, Quebec

Westmount Square is a residential and office complex located in Westmount, Quebec, Canada. There are two residential apartment buildings and two office buildings. These towers sit atop an underground shopping centre consisting of thirty-five shops. It is located between Saint Catherine Street and De Maisonneuve Boulevard and between Wood Avenue and Greene Avenue. It is connected to Place Alexis Nihon, Dawson College, and the Atwater Metro station by a tunnel.

<span class="mw-page-title-main">1271 Avenue of the Americas</span> Office skyscraper in Manhattan, New York

1271 Avenue of the Americas (formerly known as the Time & Life Building) is a 48-story skyscraper on Sixth Avenue, between 50th and 51st Streets, in the Midtown Manhattan neighborhood of New York City. Designed by architect Wallace Harrison of Harrison, Abramovitz, and Harris, the building was developed between 1956 and 1960 as part of Rockefeller Center.

<span class="mw-page-title-main">Tiffany glass</span> Glass developed by Tiffany Studios in New York City by Louis Comfort Tiffany and others

Tiffany glass refers to the many and varied types of glass developed and produced from 1878 to 1929-1930 at the Tiffany Studios in New York City, by Louis Comfort Tiffany and a team of other designers, including Clara Driscoll, Agnes F. Northrop, and Frederick Wilson.

<span class="mw-page-title-main">Arecibo Telescope</span> Former radio telescope in Puerto Rico

The Arecibo Telescope was a 305 m (1,000 ft) spherical reflector radio telescope built into a natural sinkhole at the Arecibo Observatory located near Arecibo, Puerto Rico. A cable-mount steerable receiver and several radar transmitters for emitting signals were mounted 150 m (492 ft) above the dish. Completed in November 1963, the Arecibo Telescope was the world's largest single-aperture telescope for 53 years, until it was surpassed in July 2016 by the Five-hundred-meter Aperture Spherical Telescope (FAST) in Guizhou, China.

<span class="mw-page-title-main">Robert F. Kennedy Department of Justice Building</span> United States historic place and federal building

The Robert F. Kennedy Department of Justice Building, sometimes called Main Justice, is the headquarters of the United States Department of Justice. It houses Department of Justice offices, including the office of the United States Attorney General. The building was completed in 1935. In 2001, it was renamed after Robert F. Kennedy, the 64th Attorney General of the United States.

<i>Atlas</i> (statue) Statue of Atlas at Rockefeller Center in Manhattan, New York, U.S.

Atlas is a bronze statue in Rockefeller Center, within the International Building's courtyard, in Midtown Manhattan in New York City. It is across Fifth Avenue from St. Patrick's Cathedral. The sculpture depicts the ancient Greek Titan Atlas holding the heavens on his shoulders.

<span class="mw-page-title-main">Helias Doundoulakis</span>

Helias Doundoulakis was a Greek American civil engineer who patented the suspension system for the at-the-time largest radio telescope in the world. During WWII he served in the United States Army and the Office of Strategic Services (OSS) as a spy.

<span class="mw-page-title-main">Pavilion and Colonnade Apartments</span> Buildings in Newark, New Jersey, U.S.

The Pavilion and Colonnade Apartments are three highrise apartment buildings in Newark, New Jersey. The Pavilion Apartments are located at 108-136 Martin Luther King Junior Blvd. and the Colonnade Apartments at 25-51 Clifton Avenue in the overlapping neighborhoods known as Seventh Avenue and Lower Broadway.

<i>Prometheus</i> (Manship) Sculpture by Paul Manship in Manhattan, New York

Prometheus is a 1934 gilded, cast bronze sculpture by Paul Manship, located above the lower plaza at Rockefeller Center in Manhattan, New York City.

<span class="mw-page-title-main">International Building (Rockefeller Center)</span> Office skyscraper in Manhattan, New York

The International Building, also known by its addresses 630 Fifth Avenue and 45 Rockefeller Plaza, is a skyscraper at Rockefeller Center in the Midtown Manhattan neighborhood of New York City. Completed in 1935, the 41-story, 512 ft (156 m) building was designed in the Art Deco style by Raymond Hood, Rockefeller Center's lead architect. The main tower is set back from Fifth Avenue and includes two 6-story wings to the east, known as Palazzo d'Italia and International Building North. The wings flank an entrance plaza that contains Lee Lawrie's Atlas statue.

George James Doundoulakis was a Greek American physicist and soldier who worked under British Intelligence during World War II with SOE agent Patrick Leigh Fermor, and then served with the OSS in Thessaly, Greece.

<span class="mw-page-title-main">900-910 North Lake Shore</span> Skyscraper in Chicago, IL

900 910 North Lake Shore are a pair of glass and steel buildings, perpendicular to one another, designed by architect Ludwig Mies van der Rohe, in the Streeterville neighborhood of Chicago. Completed in 1956, they marked the refinement of Mies' highrise building design concept. The buildings are built to a Modernist International style that was considered to be a departure from the dominant aesthetic at the time they were built, and even criticized as too minimal. The "glass houses" are more often appreciated for the views they offer of Lake Michigan and downtown Chicago. The buildings were referred to as “giant mirrors for lake beauty”.

John Polachek was an industrialist, known for founding the General Bronze Corporation in New York City.

References

  1. 1 2 3 4 5 6 7 "John Polachek, An Industrialist" (PDF). The New York Times. Obituaries. April 18, 1955. p. 22. Retrieved December 18, 2023. In 1903, he became a supervisor of bronze manufacturing for Tiffany Studios. Founder of General Bronze Corporation Dies – Products Adorn Leading Buildings
  2. ↑ General Bronze Corporation. "General Bronze Corporation : distinctive productions in all metals". Smithsonian Libraries. Long Island City, NY: General Bronze Corporation. pp. 1–15. Retrieved December 18, 2023. Windows, doors, entrances, grills, railings, check desks, tablets, statuary in aluminum, bronze, nickel, iron.
  3. ↑ "Trade Catalogs from the General Bronze Corporation". Smithonian – National Museum of American History – Behring Center. Washington, DC. Retrieved December 23, 2023. Aluminum Window Division; Revolving Door Division of General Bronze Corporation, Garden City, NY
  4. ↑ "Revolving Doors of General Bronze Corporation" (PDF). US Archives. General Bronze Corporation. 1960. Retrieved December 23, 2023.
  5. 1 2 3 4 5 6 Erler, Diana (August 19, 1928). "Creating a New Bronze Age". The Brooklyn Daily Eagle. p. 75. Retrieved December 28, 2023.
  6. 1 2 3 4 5 Ennis, Thomas. "Building is Designer's Testament" (PDF). The New York Times. No. November 10, 1957. pp. 313, 320. Retrieved December 17, 2023. Seagram Building Marks Apex Of Mies van der Rohe's Career
  7. 1 2 3 4 5 6 7 8 Genral Bronze Corporation (1946). "The General Bronze Corporation and Rene Paul Chambellan". Internet Archive, Columbia University. General Bronze Corporation. Retrieved December 17, 2023.
  8. ↑ "The Bronze Doors" (PDF). Supremecourt.gov. Washington, DC: The United States Supreme Court. Retrieved December 18, 2023. ... the oversized doors measure 17 feet high, 9 ½ feet wide and weigh about 13 tons. Cast by The General Bronze Corporation they were shipped to Washington and installed in early 1935.
  9. 1 2 3 4 5 6 7 "GENERAL BRONZE BUILDS THE WORLD'S LARGEST WINDOW" (PDF). Progressive Architecture. New York: Reinhold Publishing Corporation. 31 (6): 19, 51. June 1950. Retrieved December 21, 2023.
  10. 1 2 3 4 Barrett, George (September 17, 1947). "UN Capital model shows much glass" (PDF). The New York Times. New York. p. 2. Retrieved December 21, 2023. Massive Panes and Thousands of Smaller Ones Mark a Radical New Design
  11. 1 2 3 "ONE CHASE MANHATTAN PLAZA" (PDF). NYC.gov. New York City, NY: Landmarks Preservation Commission – NYC. February 10, 2009. p. 6. Retrieved December 22, 2023. The General Bronze Corporation engineered and manufactured the ¼ inch thick aluminum panels
  12. 1 2 3 4 5 6 7 8 9 Cooke, W. (October 1976). "Arecibo radio antenna". IEEE Antennas and Propagation Society Newsletter. 18 (5): 6–8. doi:10.1109/MAP.1976.27265. S2CID   31708779.
  13. 1 2 "GBC sues competitors over contentions of piracy that their electrical car radio antenna was a stolen trade secret". Justia. Retrieved December 19, 2023. Brach employees in the early 1950's into 1957 to develop a top mount disappearing antenna. It should be noted here that Brach had been manufacturing the so-called cowl top mount antenna under the Grashow patent 2,509,563, pursuant to a license agreement between Quick Mount and General Bronze of April 1954
  14. 1 2 3 "Structure for Ninety Foot Radio Telescope, Records of the NRAO". National Radio Astronomy Observatory Archives. Green Bank, WV: National Radio Astronomy Observatory. Retrieved December 17, 2023. General Bronze Corporation, 1957
  15. 1 2 3 "Ira Kamen to Richard M. Emberson". NRAO/AUI Archives. Green Bank, WV: National Radio Astronomy Observatory . Retrieved December 17, 2023.
  16. 1 2 3 Reckert, Clare M. (August 9, 1967). "ALLIED PRODUCTS PLANNING MERGER". The New York Times. Business and Finance. p. 47. Retrieved December 20, 2023. Agreement Is Set on Joining With General Bronze Corp. in $25-Million Deal
  17. 1 2 Harris, Melissa; Wernau, Julie (December 18, 2011). "Fortune's Fate". Chicago Tribune. pp. 2–1. Retrieved December 17, 2023.
  18. 1 2 "Closing announced: Allied Products Corp. of Chicago". Chicago Tribune. Chicago, IL: Tribune Publishing. November 18, 1992. Retrieved December 18, 2023. Closing announced: Allied Products Corp. of Chicago said it will close its foundry and machining operations ... blamed the decision on the loss of a major customer.
  19. ↑ Gopnik, Hilary. "Allied Products Corporation, Chicago IL". Encyclopedia.com. Retrieved December 18, 2023. The nature of Allied Products took an abrupt turn in 1961 when the company was acquired by a group of investors led by Jay Pritzker and Saul Sherman.
  20. ↑ "Polachek Merges Bronze Companies" (PDF). The New York Times. November 23, 1927. Retrieved December 18, 2023.
  21. ↑ "Museum Archivist" (PDF). Archivists.org. Fort Worth, TX: Amon Carter Museum of American Art. June 2005. Retrieved December 23, 2023.
  22. 1 2 "Tiffany Studios". The Charles Hosmer Morse Museum of American Art. Retrieved December 17, 2023.
  23. 1 2 3 4 5 Eidelberg, Martin; McClelland, Nany (2001). Behind the Scenes of Tiffany Glassmaking: the Nash Notebooks (1st ed.). St. Martin's Press. pp. 2–10. ISBN   9780312282653.
  24. 1 2 "A Chronology of Louis C. Tiffany and Tiffany Studios". Tiffany Studios. Retrieved December 17, 2023.
  25. 1 2 3 4 5 6 Rosenfeld, Lucy (2002). A Century of American Sculpture: The Roman Bronze Works Foundry (1st ed.). Schiffer Publishing. p. 11. ISBN   9780764315190.
  26. 1 2 3 "SEAGRAM' S PLANS PLAZA TOWER IN NEW YORK and Mies van der Rohe designs his first skyscraper office building" (PDF). Architectural Forum. 102 (4): 9. April 1955. Retrieved December 21, 2023.
  27. 1 2 3 4 5 6 Nash, Eric (1999). Manhattan Skyscrapers (1st ed.). Princeton, New Jersey: Princeton Architectural Press. pp. 105–106. ISBN   1-56898-181-3 . Retrieved December 16, 2023.
  28. 1 2 3 4 5 6 7 Nash, Eric (1999). Manhattan Skyscrapers (1st ed.). Princeton, New Jersey: Princeton Architectural Press. pp. 99–100. ISBN   1-56898-181-3 . Retrieved December 16, 2023.
  29. 1 2 3 4 5 6 7 Nash, Eric (1999). Manhattan Skyscrapers (1st ed.). Princeton, New Jersey: Princeton Architectural Press. p. 113. ISBN   1-56898-181-3 . Retrieved December 20, 2023.
  30. 1 2 3 4 5 6 7 Tanner, Ogden; Allison, David; Blake, Peter; McQuade, Walter (July 1961). "The Chase — Portrait of a Giant" (PDF). Architectural Forum. 115 (1): 66–94. Retrieved December 22, 2023. Recessed flush with the inside faces of the huge aluminum-sheathed columns, the curtain wall consists of a two-tone aluminum spandrel and sill panel and an 8-foot-high window of clear glass
  31. 1 2 "Leon S. Brach" (PDF). The New York Times. January 26, 1970. Retrieved December 18, 2023.
  32. 1 2 3 4 5 "Integrated antenna systems installed for the National Bureau of Standards, MIT's 120' Search Radar Antenna, and for NASA's satellite tracking antennas" (PDF). World Radio History. Retrieved December 19, 2023. Integrated antenna systems for Satellite and High Speed Missile Tracking, Scatter Propagation, Radar, Radio Astronomy, Telemetering and Space Vehicle Communicatici functions, designed, developed, manufactured and installed by General Bronze antenna specialists.
  33. ↑ "Aaron Saphier" (PDF). The New York Times. New York City. December 10, 1971. p. 46. Retrieved December 22, 2023. Aaron S. Saphier, president and CEO of Allied Aircraft Products of Dayton, OH, and for many years chairman and CEO of General Bronze Corporation
  34. 1 2 "GENERAL BRONZE CO. IN ALUMINUM FIELD – Mass Production of Window Frames for Residential Use Throughout U.S. Started RECORD ORDER COMPLETED Includes 4,500 for New Army Hospital Under Construction on Oahu Island, Hawaii" (PDF). The New York Times . February 8, 1946. p. 32. Certain of the excellent future for aluminum window frames, the General Bronze Corporation, Long Island City, has started mass production of such items for residential use throughout the country
  35. 1 2 3 4 "Bronze Memorials and Tablets". Hathi Trust. General Bronze Corporation. 1946. Retrieved December 23, 2023. Bronze has been the metal of all civilizations through the ages
  36. ↑ "Public Works Collection of William Zorach". Zorach Art. Retrieved December 23, 2023. "Spirit of the Dance," William Zorach, aluminum sculpture, Radio City Music Hall, Rockefeller Center, New York, NY
  37. ↑ Rand, Harry (1989). Paul Manship. Washington, DC: Smithsonian Institution Press. pp. 139–141. ISBN   0-87474-807-0.
  38. ↑ "Roman Bronze Works". Amon Carter Museum of American Art. Carter Museum. Retrieved December 23, 2023.
  39. ↑ "Andrew W. Mellon Memorial Fountain Restored by National Gallery of Art in Honor of 75th Anniversary with a Major Grant from Richard King Mellon Foundation —Monumental Bronze Fountain Operational on March 17—". National Gallery of Art. Washington, DC. Retrieved December 23, 2023. Andrew W. Mellon Memorial Fountain, situated at the apex of the Federal Triangle complex in downtown Washington, DC
  40. ↑ "The Bronze Doors" (PDF). Supreme Court. Washington, DC: The Supreme Court. Retrieved December 23, 2023. "Out of all of our monumental projects, spread over two lifetimes, the Supreme Court doors are the only work that we ever signed – that's how important they were." – JOHN DONNELLY, JR., Sculptor
  41. 1 2 Chamber of Commerce of the Borough of Queens Records at the Archives at Queens Library. "Factories and Industrial Buildings – General Bronze Corp". Queens Library. Queens, NY: General Bronze Corporation. Retrieved December 18, 2023. U.S. Army Soldiers in the Pacific Theater at a Gun Turret Made by General Bronze Corp. – August 9, 1943
  42. ↑ "Designed for the P22The A-7 Portable Tripod Engine Hoist stands at a massive 25–30 ft tall, manufactured by The General Bronze Corporation of New York". Rustic Factory. Retrieved December 23, 2023. Piece of WWII Aviation History was originally tasked with removing aircraft propellers and engines for the Army Air Corps during WWII
  43. 1 2 3 4 5 6 Schulze, Franz; Windhorst, Edward (November 2012). Mies van der Rohe (1st ed.). Chicago, IL: University of Chicago Press. pp. 329–330. ISBN   978-0-226-75600-4.
  44. ↑ "Trade Catalogs from the L.S. Brach Mfg. Co". National Museum of American History – Behring Center of the Smithsonian Institution. Newark, NJ: L.S. Brach Manufacturing Co. Retrieved December 18, 2023. Electrical apparatus and equipment; Railroad, streetcar, subway and tramway equipment and supplies; Telephone, telegraph and telecommunications equipment and supplies
  45. 1 2 Kamen, Ira; Doundoulakis, George (January 1, 1956). Scatter Propagation. Howard W. Sams. Retrieved December 18, 2023.
  46. ↑ US 2989748,Doundoulakis, George&Kamen, Ira,"Feed system for broadband antenna",issued 1961
  47. ↑ Doundoulakis, George; Gethin, Stanley (1958). "Design considerations on modern scatter systems.". Catalog of Copyright Entries. 3. Vol. 13. Library of Congress: US Copyright Office. p. 194.
  48. ↑ Doundoulakis, George; Gethin, Stanley (1958). "Far field patterns of parabaloidal reflectors.". Catalog of Copyright Entries. 3. Vol. 13. Library of Congress: US Copyright Office. p. 194.
  49. ↑ "H01Q1/1214 – Supports; Mounting means for fastening a rigid aerial element through a wall". Google patents. 1953. Retrieved December 19, 2023. Mounting means for fastening a rigid aerial element through a wall. For example: through the vehicle body of automobiles. Mounting through the roof of another object, e.g. vehicle.
  50. 1 2 3 4 Gordon, William (1959), "Cornell will build a radar to observe the ionosphere", The New York Herald Tribune, New York City, NY: Herald Tribune Publishing, no. Engineer's News Supplement – A Monthly Digest of Current Developments in the Field of Science and Engineering, p. 1, ProQuest   1324066280 , retrieved December 20, 2023
  51. 1 2 3 Gordon, William E.; Booker, Henry; Nichols, Ben (1958). "Design Study of a Radar to Explore the Earth's Ionosphere and Surrounding Space". Research Report EE 395. Ithaca, New York: Cornell University, School of Electrical Engineering. p. 10.
  52. 1 2 3 Gold, Thomas (May 23, 2012), "7", Taking the Back off the Watch: A Personal Memoir, Astrophysics and Space Science Library, vol. 381 (1 ed.), New York: Springer Heidelberg, p. 119, doi:10.1007/978-3-642-27588-3, ISBN   978-3-642-27587-6, archived from the original on November 20, 2020, retrieved October 14, 2020
  53. ↑ Matthews, John (2013), "A short history of geophysical radar at Arecibo Observatory" (PDF), History of Geo- and Space Sciences, Copernicus Publications, 4 (1): 20, Bibcode:2013HGSS....4...19M, doi: 10.5194/hgss-4-19-2013 , retrieved December 10, 2023
  54. ↑ Frè, Pietro (2013), "7", Gravity, a geometrical course, vol. 1:Development of the theory and basic physical applications (1 ed.), New York: Springer, p. 276, Bibcode:2013ggc1.book.....F, doi:10.1007/978-94-007-5361-7, ISBN   978-94-007-5360-0, archived from the original on November 20, 2020, retrieved October 14, 2020
  55. 1 2 USpatent 3273156,Helias Doundoulakis,"Radio Telescope having a scanning feed supported by a cable suspension over a stationary reflector",issued 1966-09-13
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.